Ubuntu Multimedia :: Record Microphone Input Using Ffmpeg / Alsa Always Receive Error
Dec 20, 2010
I am attempting to record my microphone input using ffmpeg / alsa but always receive the following error:
[code]...
Using arecord works perfectly with hw:0,0. I had also tried to use /dev/snd/hwC0D0 as input but I receive an error from alsa saying that it doesn't exist (despite it existing and having adequate permissions). I know absolutely nothing about hardware but am comfortable around the command line
View 2 Replies
ADVERTISEMENT
Oct 28, 2010
I'm trying to record a video with sound through FFmpeg, and while it records the system sounds just fine, it doesn't record the microphone (in fact, it crashes on doing so!). The strange thing is that if I use arecord, it works just perfectly, but through ffmpeg it crashes.This is the command that I use to launch FFmpeg:
Code:
/usr/bin/ffmpeg
-f x11grab
[code]....
View 9 Replies
View Related
Apr 8, 2011
I have some microphone problems. I can't record anything. (I'm using openSUSE 11.3)
My sound card was detected almost correctly (at least the chip-set was i think). I have an Asrock motherboard (k7upgrade880, with a Southbridge: VIA 8237 | Audio: CMedia CMI9761 6 channel AC'97.
I ran these commands so far with these results - while i was following the audio troubleshooting guide (SDB:Audio troubleshooting - openSUSE
But i have NO audio playback problems - movies, games, music all play well. And the Microphone guid has a broken link
I tried to change my 50-sound.conf file (i read it on a forum, I'm new to linux troubleshooting) from this:
options snd slots=snd-via82xx to this: options snd slots=snd-via82xx position_fix=1
But that did not work either. I did not get any sound with the last line.
View 9 Replies
View Related
Mar 22, 2010
I creating a mini soft for screencast (audio + video) with ffmpeg.For the video,it's ok.For the sound, the capture of sound of my webcam (/dev/dsp1) it's ok.
Code:
ffmpeg -f oss -ar 44100 -i /dev/dsp1 -acodec mp2 -ab 128k test.mp3
But for my audio desktop :
[code]...
View 8 Replies
View Related
Apr 8, 2011
I have another issue, my microphone does not record at all!! When I try to record, it just makes this....dot. dot sound.I have a Gateway NV53 laptop with an internal microphone built in Does anyone know a solution to it?I've done some research and it all seems to end up in a dead...end. I'm running Ubuntu 10.10 and everything is up to date and working so far.
View 1 Replies
View Related
Jan 31, 2010
I'm running Ubuntu 9.10 on an Asus F3JC laptop with an integrated webcam and microphone. The webcam is a
Code:
user@ubuntu:~$ lsusb
Bus 001 Device 004: ID 05e1:0501 Syntek Semiconductor Co., Ltd DC-1125 WebCam
and it works. If i tap on the microphone or if I blow on it, I hear noises but after I record something with gnome-sound-recorder I don't hear any sound! The same with Skype, for example.
On Xp (other hd partition) it works.
The audio device on the laptop is a
Code:
user@ubuntu:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC660 Analog [ALC660 Analog]
Subdevices: 1/1
[Code]....
If I open the "sound preferences tool" the device for sound input is "Internal Audio Analog Stereo" and even if I tune the volume of the microphone I don't see any movement in the input level bar. I've also checked alsamixer and the digital volum in the capture interface is set at the maximum.
View 6 Replies
View Related
Oct 7, 2010
recording defaults to my microphone but I want to record sounds directly from a application.
View 4 Replies
View Related
Apr 12, 2011
I've had this problem on ubuntu before, and I remember that I had to install a program from synaptics package manager and change the noise removal settings. This worked on someone else's mono mic, and I'm wondering if anyone knows which program changes the system setting for noise cancellation.
View 2 Replies
View Related
Jul 14, 2010
I was running 9.04 and could, through some magical sequence of toggling options that I was unable to figure out, occasionally get recording from the mic to work in audacity. Ardour worked more reliably, but is kind of over-featured. Audacity is simpler and I know how to get things done. For a while, I was doing basic recording in Ardour, saving it to wav then editing in audacity.
Well, I noticed a howto on getting audacity working in 9.10... so I upgraded ("what could possibly go wrong?"). I still can't record audio in audacity and ardour is now ALSO unable to record audio. They start recording samples but nothing comes in but silence. I've got audacity set to ALSA/default/default and when I click monitor, the stream appears in the pavucontrol app. I've moved it to the input device and that doesn't seem to affect the results at all. Everything looks like it should be working fine except there's some invisible mute button, or something. Under alsamixer's Capture section, Mic has a red "CAPTUR" with no bar to adjust.
View 9 Replies
View Related
Mar 17, 2011
I've got sound - I hear all the system sounds, I can play sound files, CDs, etc. But I have not been able to record and play back anything with success.
Originally, when I would record (either with arecord or with audacity) I would get extremely low quality sound, with lots of noise and crackling, and my recorded voice was barely audible (even with volume turned up to max). I played with alsamixer for hours without being able to improve matters.
Things are worse now. I tried installing alsa-firmware, as indicated at SDB:Audio troubleshooting - openSUSE. I also tried updating alsa following instructions given at SDB:Alsa-update - openSUSE. I'm not sure which of these changes did it, but the result is that I can no longer record ANYTHING at all. I get absolutely nothing, not even the low quality noise and crackling I was getting before. It's as if there is no audio input at all.
Uninstalling alsa-firmware and reverting back to the older alsa version (1.0.20) didn't change a thing.
I'm running openSUSE 11.2, kernel 2.6.31.14-0.6-desktop, alsa 1.0.20. My sound card is a Creative X-Fi (by the way, yast cannot detect my card, another problem I have never solved).
View 9 Replies
View Related
Mar 3, 2010
I have alsa 1.0.22 on my system. I can plug in my pcmcia card into my laptop, and my computer register's it, but when I plug in my microdock, alsa still thinks it's an EMU 1010, which is just the basic one, and I have a 1616, so none of my inputs register anything at all, so I can't record audio. The only thing that seems to be working perfectly or at all, are the audio jack on the pc card, the headphone jack on the microdock, and the stereo mini out for speakers on the microdock. I think it's odd that the headphone and stereo outs work on the microdock, but I can't input any audio. how to get the rest of my microdock to work?
View 2 Replies
View Related
Jan 5, 2010
1) I made some tests and the webcams works, both other people and me are not able to see my image (any library for video decoding missing?). The cam works fine with cheese.2) Integrated microphone doesn't work, whereas an external one works. The integrated microphone works with "sound recorder" application.My is a Packard Bell netbookCPU Atom N270 @1.6GHz, 1GB RAM, 160GB HDO.S. Ubuntu Karmic Koala 9.10
View 9 Replies
View Related
Jan 2, 2011
I should create the bridge between a linear input and output. It is desirable, with possibility to impose effects on a sound. (But it isn't obligatory)
Alsamixer:
lspci | grep Audio:
Quote:
egor@egor-ubuntu:~$ lspci | grep Audio
00:08.0 Audio device: nVidia Corporation MCP79 High Definition Audio (rev b1)
02:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1)
[code]....
Alsa and PulseAudio was installed from PPA.
View 1 Replies
View Related
Jan 12, 2010
I am trying to record audio playback from an application and the microphone at the same time on recordmydesktop using pulse audio. I just can't figure out how to mix them both. I have tried a lot already and can only get either the mic or the audio playback to be recorded, not both. Can this be done using pavucontroll?
I have been search now for hours to find a solution (also here on the forum) for this and getting really frustrated now. Maybe i'm just missing something really obvious, so sorry if this is a stupid question.
View 5 Replies
View Related
Aug 12, 2010
I have Ardour GTK2 , and I am trying to record from a mic, AND IT JUST WONT WORK
View 4 Replies
View Related
Sep 1, 2011
I just bought a new laptop and installed Ubuntu onto it. Everything is working fine except for the microphone. Every time I try to record, there's a bunch of static in the background. I've tried changing the sliders on "alsamixer", which helps a little bit, but it never completely goes away. I know it's not a hardware problem because it perfectly clear on Windows (I'm dual booting). I've used Ubuntu a lot in the past, but I don't know much about audio drivers, or even how to figure out which one I'm currently using. My laptop is an Acer AS5750-9851 and I'm using Ubuntu 11.04, 64 bit.
View 3 Replies
View Related
Jan 15, 2010
Is there any way to record audio from internal source with gtk-recordmydesktop?
View 2 Replies
View Related
Jan 20, 2010
I have upgraded from 9.04 to 9.10. Both playback and record were working using only ALSA. Karmic installed PulseAudio. Looking around the forums I found a post on how to update to the latest ALSA driver (+ lib + utils) and remove pulse to take it out of the equation. With or without pulse I cannot get record working. For work I need to use my laptop as a softphone. I've tested my headset on another machine - headphones and mic both work. Any suggestions on how to resolve this would be greatly appreciated. I have a Thinkpad T61P. Below is the output of some hopefully useful commands ...uname -aLinux moes 2.6.31-17-generic #54-Ubuntu SMP Thu Dec 10 16:20:31 UTC 2009 i686 GNU/Linux
lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
[code]....
View 1 Replies
View Related
Jan 8, 2009
I would want to record/edit/save music from the microphone (convert a tape to CD). But. I start audacity, leave everything at default, record the music, and play back. It plays agonisingly slow. I can change the sample rate manually such that it sounds good, but this is just a guess (I could for example measure the recording time, and adjust the sample rate after that, such that the displayed time on the timeline fits this time). Why the hell do I need to do this? Why is the recording sample rate = playbe sample rate not producing correct output?
View 3 Replies
View Related
May 2, 2011
I have some troubles with my microphone.I can hear it in ootput if I knock on it or speak, but I can't record from mic. It also does not work in skype.cant figure out what is the problem.
View 5 Replies
View Related
May 16, 2011
I'm having an issue using MPD currently, using sonata as the front end. Quick specs are as follows:
Code: Fedora 13 x64 - Linux ltp01 2.6.34.8-68.fc13.x86_64 #1 SMP Thu Feb 17 15:03:58 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux MPD version - mpd (MPD: Music Player Daemon) 0.15.11 Here is my mpd.conf file contents: Code: # An example configuration file for MPD # See the mpd.conf man page for a more detailed description of each parameter.
[Code]...
I googled my issue, and didn't come up with much to help me. Any advice on this? It's not a completely pressing issue, but I would like to know what is going on and how I can fix this, since I never messed with MPD before in my life.
View 10 Replies
View Related
Sep 8, 2010
What i am trying to acomplish is this
Code:
I have found a few guides that were to accomplish this, but they seem outdated as options they call for are not available to me.
View 4 Replies
View Related
Jan 4, 2010
I have had trouble with my sound since installing. I have been able to get output sounds to work by setting my sound output to:Internal Audio Digital Stereo (IEC95 instead of:However, my microphone does not work. I know it was working earlier on but I can't figure out what the settings were at that time.Are there any ideas on what I can try to get the input and output audio working correctly?
View 1 Replies
View Related
Dec 12, 2010
I am trying to get the sounds that are played on the Casio CTK-651 keyboard from the keyboard into ubuntu or windows. I can get the signal, but no sound is played back under Windows when it's connected with an AUX-to-USB connector. When I do it with the MIDI-to-USB connector in windows and ubuntu, whenever I press a key, I get what is programmed into LMMS through connecting in a channel. I can't get the piano or guitar or whatever sound that the keyboard is making into the computer. I can upload some video to show what I'm talking about with the aux connector.
View 1 Replies
View Related
Jan 21, 2011
I've tried to look for a solution for a few days now, and haven't had any results so far. I really hope you can help me so I can get to talk with my girlfriend.I'm running Lubuntu with 10.04 LTS, and alsa version 1.0.23 on Samsung NC10.Hardware works, soundcard is recognized by the OS, modules are loaded, alsamixer volume up and unmuted, sound output is ok, arecord or sound recorder don't get input.
- The microphone hardware works. Having the volumes up I hear the noise from the speakers when tapping the microphone.
- Soundcard is recognized by OS (and like I said, music and all other sound output is perfectly fine)
View 3 Replies
View Related
Aug 12, 2011
For some time, my microphone input doesn't reach the recording application, but instead goes directly to the loudspeaker. If I make a sound in the microphone, it will go to the loudspeakers, and Audacity or Skype will not "hear" anything (and of course, with this set-up, there's a constant noise in the loudspeaker, coming from the microphone).This problem goes away if I install PulseAudio. So obviously, there's nothing broken with either of ALSA or hardware, only some misconfiguration somewhere, and PulseAudio can make a sense of the mess. Playing with all sorts of configurations in Alsamixer didn't help.
Unfortunately, I don't want PulseAudio, because it causes output problems which are a bit too subtle for me to describe coherently here. So I'd rather fix ALSA than Pulse.Please direct me into how to investigate this. The OS is Debian Unstable, the audio card is an integrated Intel ALC1200.
View 1 Replies
View Related
Feb 13, 2011
I am currently trying to start doing some screen casting and having a problem with audio recording in gtk-recordmydesktop. The problem is that I need to record both; my computers audio card output, and my mic input at the same time. As of now I am able to record one or the other.
View 4 Replies
View Related
May 7, 2010
since 9.10.My microphone works, BUT only after I open the 'Sound Preferences' panel, and change the setting under the 'Connector' tab to another selection (any will do), then set it back to 'Microphone 1'.Since this works, I wondered if there is a way to make this happen automatically at every login?
View 7 Replies
View Related
Jun 10, 2010
I have a vinyl turntable. The only output it has are some RCA cables. I've connevted these to other RCA cables, so now, I can put it into one of the audio in jacks on my computer. It's just a standard microphone plug. In Windows, there was an option that would let me listen to the input, and this would be the only way I could listen to my vinyls. In kubuntu, I can't find any way to do so. I don't want to have to boot into Windows 7 every time I want to listen to my vinyls, so is there any way I can get around this?
View 1 Replies
View Related
May 30, 2010
I have gotten my microphone working, this was an issue for a long time.
Now I can hear myself through my headphones so I know the computer is "hearing" it.
But... I still show "No Input Devices Available" in my Pulse Audio volume control so I'm still not able to record... which of course is my whole point.
View 8 Replies
View Related
