Debian Hardware :: Microsoft Designer Bluetooth Mouse System Hang When Pairing
Aug 1, 2015
Just picked up a Microsoft Designer Bluetooth Mouse.Whenever I try to pair it, my system hangs and I have to hard power it down. The mouse is Bluetooth 4.0, but my Bluetooth connectivity is provided by my Intel Wireless 3160 card which does support Bluetooth 4.0.I'm using Blueman as a front end, and one other thing of note is that it shows as "Unknown" after a scan.If I need to return it, I need to return it, but it seems like a good mouse and I'd like to keep it if I can make it work.
I've took this out of syslog:
Code: Select allAug 1 14:58:04 Noah-LEMUR kernel: [ 317.772054] BUG: unable to handle kernel NULL pointer dereference at 0000000000000398
Aug 1 14:58:04 Noah-LEMUR kernel: [ 317.772090] IP: [<ffffffff81569f7e>] mutex_lock+0xe/0x30
Aug 1 14:58:04 Noah-LEMUR kernel: [ 317.772113] PGD 0
Aug 1 14:58:04 Noah-LEMUR kernel: [ 317.772123] Oops: 0002 [#1] SMP
[code]...
View 0 Replies
ADVERTISEMENT
Nov 8, 2010
I have a simple Bluetooth device I would like to pair with my computer. I detect it in the BlueTooth New Device Setup (from the GNOME pannel), detected as "Unknown", I enter its pairing code (1234) and click on "forward". But then it asks me to enter a code on the BlueTooth device... I don't have anything to enter any code on this device. I would like to simply connect to it! From other OS, I manage to connect to the device as it's not asking to write any pair code in the bluetooth device. The PIN code 1234 is enough to make the connection.
View 3 Replies
View Related
Aug 6, 2010
I'm struggling for pairing my laptop with my phone to dial up internet. On slack 13 I configured hcid.conf but on the new 13.1 with the new demon bluetoothd I don't know how to pair on command line.Documentation is not a lot, or I'm not able to find it.
View 7 Replies
View Related
Jan 18, 2011
I have a bluetooth headset that I hope I can get to work with Ubuntu 10.10 so that I can use it with Skype.I am using these instructions to get it to work. However, there are some differences between my experience and what I expect from the instructions, ultimately leading to some errors.First, I should mention that according to Blueman device manager, it would seem I have successfully paired my device. It has a MAC address. I have attached a screen shot of the interface:It sure looks like the device is recognized by my system. However, when I get to step 5, the MAC address of the one device I see is not the same as the one in the interface above:
Code:
$ hcitool scan
Scanning ...
[code]....
View 4 Replies
View Related
Feb 24, 2010
I've got a Microsoft Wireless Entertainment Keyboard 7000 that worked fine under Ubuntu 9. The GUI discovers my mouse fine, and also appears to connect to the keyboard, but the keyboard does not type when paired through the GUI. When I pair using hidd (either --search or --connect), the keyboard pairs and works fine, however when I cycle power on the keyboard, it will not auto-reconnect, and I get the following error message associated with it (see attached image):
Grant access to '00001124-0000-1000-8000-00805f9b34fb'Device 'Microsoft Wireless Entertainment Keyboard 7000' (00:12:5A:A1:5A:8D) wants access to the service '00001124-0000-1000-8000-00805f9b34fb'. If i grant access, it does nothing, and will simply request it again when a key is typed. how to make the bluetooth service automatically pair (either through config files, or better yet, through the GUI?)
View 1 Replies
View Related
Aug 11, 2009
I am developing an application which communicates with a bluetooth device.I do not want the user to pair or unpair the device using the Bluetooth applet or command line, but I want to automate the pairing process through my application. The application will scan and find the bluetooth devices in the proximity of the computer, and automatically pair the required device without any user input.Where should I look for the relevant APIs?
View 1 Replies
View Related
May 27, 2010
The PIN validation screen is giving me some trouble. I am trying to pair an LG Rumor Touch and the PIN pops up and matches and the phone is happy to accept the pairing so when I click the PIN matches button on the Bluetooth Remote Device Wizard it will not close. It shows a spinny clocky but just sits there until I cancel. The device manager shows a greyed out light but it lists the device. The tray icon shows device, but gives No supported services found on the menu entry. Dolphin shows device but when I click it to browse it loads to an empty folder. The Device Wizard behaves this way for other phones also, but I was able to get some services running if I ignored it and let it sit there. If I canceled the process it messed up the services.
View 1 Replies
View Related
Jun 23, 2010
I can't configure Bluetooth in Slackware 13.1. It basically works. I can scan my mobile phone:
Code:
$ hcitool scan
Scanning ...
BA:BE:DE:AD:AB:ED Nokia 6300
But when I try other commands, mobile phone asks me about passcode. Because I don't know it pairing fails:
Code:
$ gammu 6300 --identify
Error opening device. Unknown, busy or no permissions.
On the other hand when I try to pair computer using mobile phone it doesn't find any device.
Code:
Pair new device
Searching for devices
No devices found
In Slackware 13.0 to configure Bluetooth it was enough to edit /etc/bluetooth/hcid.conf file. In Slackware 13.1 there is no such file. I tried to use blueman but it offers first and foremost a lot of error messages. In despair I even started KDE and tried Bluetooth Manager. It attempts to run for a dozen or so of second and finally fails. I did full installation of Slackware 13.1 and I use generic SMP kernel.
View 6 Replies
View Related
Oct 24, 2009
in openSUSE 11.3 where can I put PIN for bluetooth devices pairing using just command line?
View 9 Replies
View Related
Aug 17, 2010
In openSUSE 11.3 where can I put PIN for bluetooth devices pairing using just command line?
View 5 Replies
View Related
May 14, 2009
pairing bluetooth devices on Centos? I'm trying to pair a phone (Nokia 6086) with a bluetooth dongle. I've been able to do it on Ubuntu (using the bluetooth applet), but so far no luck connecting it to a Centos machine. Steps I have taken so far:
[Code]...
View 1 Replies
View Related
Aug 3, 2011
I was in 2.6.38.-2-amd64 and it was upgraded to 2.6.39-2-amd64. After the upgrade, every reboot disables the bluetooth mouse. There is a message from the panel with a bluetooth icon
Bluetooth Device
Authorization request from Logitec mouse...
check authorization
I push the buttons on my mouse and the button on the dongle to try and get them to pair, but, the dongle does not work. It is not scanning when I push the connect button.I unplug the usb dongle, and plug it in again, and this time I am able to pair them, and the mouse works. But, I have to do this every time I reboot which is a pain. I found that in the previous kernel, The Bloothtooh package is 4.91-1, but it has been upgrade to 4.91-2. So, this is creating the problem.
View 14 Replies
View Related
May 9, 2011
I recently upgraded this machine from Ubuntu Maverick 10.10 to Debian Squeeze, x86_64, by wiping the root partition (I kept my backup and my home partitions). Everything has gone OK except this: for whatever reason I cannot pair my Microsoft Bluetooth Notebook Mouse 5000 with this machine any longer. In bluetooth-applet I can see the mouse when I go to pair it with the machine, but it simply times out and the pairing fails.
The target mouse definitely used to work in Ubuntu, so I doubt it's a problem in the physical layer. I tried another Bluetooth mouse (a Rocketfish/BestBuy POS), and it doesn't pair either. The Microsoft mouse I would like to use pairs just fine with my Debian squeeze laptop, but they're not using identical Bluetooth adapters as far as I can tell. lsusb reports that I've got a Broadcom BCM2210 in my workstation (the subject of this post), and lsusb on my laptop reports some kind of Broadcom Bluetooth adapter, but doesn't report its chipset.I'd really like to stay on squeeze if possible, but my googling for this has only led me to old documentation, or stuff that applies to wheezy or sid.
View 4 Replies
View Related
Nov 16, 2014
I have an ASUS Zenbook UX31E with Debian testing and LXDE as a Desktop environment. I have a Logitech T630 Mouse that I connect through Bluetooth. When the mouse is paired I can use it properly but I get random keys typed in my desktop such as "1", "2" or "/".I am a regular user of Debian, and I have being using the system for several years now even worked as sysadmin for sometime. However I do not have much knowledge about Bluetooth devices management. I found no information on this issue on the internet and I do not know where too look for more info on my own system. Here is some info I got:
Code: Select all:~$ hciconfig -a hci0
hci0:Â Â Type: BR/EDRÂ Bus: USB
    BD Address: 74:2F:68:CC:5C:74 ACL MTU: 1022:8 SCO MTU: 183:5
    UP RUNNING PSCAN
    RX bytes:606 acl:0 sco:0 events:36 errors:0
    TX bytes:939 acl:0 sco:0 commands:36 errors:0
   Â
[code]....
I have tested "blueman-applet" and "bluedevil" as desktops applets and pairing through console gives same results, so it seems like a problem with the bluetooth communication.
View 0 Replies
View Related
Jul 8, 2011
I have a strange problem on my system. When I turn off printer, system hang. Gdm/X exit and I can see a terminal screen with a lot of info (but I can not capture it, except taking a photo). I must press reset button. It's not all times, but at least 50% I shutdown printer. I was looking logs and I can not see any relevant. Maybe this (copy some sections of /var/log/messages, remove other not revelant):
Jul 7 19:43:34 dcr64 kernel: [341172.052076] usb 1-8: new high speed USB device number 7 using ehci_hcd
Jul 7 19:43:34 dcr64 kernel: [341172.185255] usb 1-8: New USB device found, idVendor=03f0, idProduct=4412
Jul 7 19:43:34 dcr64 kernel: [341172.185260] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[Code]...
Sometimes I turn on printer to get a photocopy and turn off later, and system hand, so, it's not necesary to print or scan to get this error.
View 2 Replies
View Related
Jun 23, 2015
If I shutdown from X the system hangs and I have to yank out the power cord. Same on logout.
ctrl+alt+f1 hangs for a few minutes and then starts a terminal; which does not respond to the keyboard.
There are no tty.conf files in /etc/init .
But inittab looks normal to me and includes tty (1-6)
Executing init 6 from a terminal in X will reboot the system
I was thinking this might be a dbus issue, but I am not sure. I also understand some recent issues exist with SysRq sequences. May be a video card issue,,,
Other than normal package upgrades the only changes were a recent change from a VGA to HDMI cable. I can't see why that would matter
Linux Lugh 3.2.0-4-amd64 #1 SMP Debian 3.2.68-1+deb7u2 x86_64 GNU/Linux
View 6 Replies
View Related
Aug 28, 2010
i reached step six where it states "6. When the root and swap partitions are formatted the base installation will begin. Note that your system may appear to hang at different points during the install but it hasn't. Just be patient." I have been staring at a blank blue screen with this blinking cursor at the bottom for 30 minutes and i was just wondering how much more "patient" will it take. for some system details. the system is clean / fist time run and anything installed on it.
View 7 Replies
View Related
Jul 16, 2015
I have a Debian testing system on a laptop that used to have Windows 8 on it. I kept the EFI boatloader and its partition, but now every time the system boots, it first tries to boot into Windows (which isn't there anymore). Removing /boot/efi/EFI/Microsoft just leads to an error message when booting, with some component of Windows still trying to load and not finding those files.
The workaround for now is to go into the UEFI boot menu on every boot and selecting the "debian" entry, which works but is a bit cumbersome.How can I get rid of the Microsoft loader completely? I find a lot about repairing or re-adding the Windows bootloader, but nothing about removing it.
View 10 Replies
View Related
Aug 18, 2015
My system is hanging on screen suspension... And its not the usual hang on "sleep" or others similars, it will happen by only having the screen on stand-by ( eg xset +dpms)...
If I leave for a while the screen will shutdown as expected but computer will completely hang after an indefinite time, it will not respond to outside connections and the will be spinning faster than usual...
Only workaround is to have the screen power save option disabled, in my case, on the KDE settings...
I have tried the most common solution to have "nomodeset" as a kernel option to disable mode setting, but this doesn't seem to work...
Also tried to forcebly reproduce the issue with Code: Select allxset force dpms standby/suspend/off but nothing happens like that...
This issue also only appears with the fglrx driver, open-source works well.
View 0 Replies
View Related
Mar 14, 2016
My system currently freeze entire UI more frequently when opening more than 1 tab in chromium. not relate to any specific web page but especially on [URL] ....
Code: Select all uname -a
Linux GlobeTravelers 4.3.0-1-amd64 #1 SMP Debian 4.3.5-1 (2016-02-06) x86_64 GNU/Linux
chromuim
Version 49.0.2623.75 built on Debian stretch/sid, running on Debian stretch/sid (64-bit)
I google and found lot of chromium freeze UI bug reports on Ubuntu, Fedora, Osx ...
View 2 Replies
View Related
Nov 14, 2010
I'm trying to configure my Microsoft Intellimouse 3000 in Ubuntu 10.04 and am not really having any luck. Basically all I want is to have the thumb button set as my back command. And of course if that's easy then I would want to assign commands to all buttons.
View 1 Replies
View Related
Aug 19, 2010
Have this setup:
Problem is when srv01 has problems and is taken offline from the network, all the pc01-pc20 computers freeze, you can move the mouse but the menus don't work, you can go restart or shutdown either. only solution at this time is to turn it off or restart through the button on the pc case.
View 2 Replies
View Related
Mar 25, 2010
Fedora
Release 12 (Constantine)
Kernel Linux 2.6.32.9-70.fc12.i1686
GNOME 2.28.2
[Code].....
OK so I installed Razertool but when I try to configure it, it says: There was an error communicating with the device: Operation not permitted You may need to change the permissions of the device (see the README)
and in the GUI it reads: FIrmware Version ?.?? (NO DEVICE) As for other things like CPU and Graphics, how can I confirm these are running properly? My computer seems to lag a bit. As for graphics, everytime I try to enable the desktop effects it errors and says: Accelerated 3D graphics is not available
View 4 Replies
View Related
May 28, 2011
Every single thing is working just AMAZINGJust the mouse scroll is not working at all
View 7 Replies
View Related
May 11, 2011
I just updated to kernel 2.6.35.13-91.fc14.x86_64, and I'm now having a weird issue where my computer will hang during startup and shutdown unless I move the mouse around.
While moving the mouse, it will boot up or shut down normally. Once i stop moving the mouse around it will hang (until I begin to move the mouse again).Once fully booted it acts fine..
View 13 Replies
View Related
Nov 24, 2010
Everything worked fine in Kubuntu 10.04 (64-bit). On the upgrade to 10.10 (64-bit) it takes about a minute until I can move the mouse after startup and the integrated memory card reader doesn't work (but the green LED which used to only come on when there was a card in there is now always on). This has been discussed twice before: here (closed and solved by unplugging cardreader which I do not want to do) and here (unsolved but closed as maverick no longer in beta) dmesg (note the errer -110) follows. Let me know if I can/should include any other logs/info!
Code:
[ 13.575002] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 13.790470] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 13.903728] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 16.280020] usb 1-5: device descriptor read/64, error -110
[ 17.375755] sky2 0000:02:00.0: eth0: enabling interface
[ 17.376174] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.377028] type=1400 audit(1290608578.996:5): apparmor="STATUS" operation="profile_load"
[Code]......
View 2 Replies
View Related
Oct 17, 2010
If I use my bluetooth apple Mighty Mouse in a LiveCD of Ubuntu, or in mac OSX, when I next boot linux from disk, the mouse won't connect to it. I do not know if it is something about the mouse that is changing or if it is something on the linux side. This has just happened to me again, and I am sure that the mouse was working before.
View 2 Replies
View Related
May 18, 2010
I've just set up dual boot Win 7 with openSUSE 11.2 but unfortunately I have run into a couple of problems. One of them is that I cannot set up my Bluetooth mouse, which works under windows.
I am typing this from Windows right now (wireless is not working either) so I cannot reproduce the exact steps but anyways, when I try to add a new Bluetooth device it first finds my mouse, and keeps searching, and then removes the mouse from the list, and keeps searching, then it finds it again, ... and it goes endlessly. If I select mouse on the list and click forward on the next screen I get an error saying that the mouse was not set up.
View 4 Replies
View Related
Oct 17, 2010
How to attach dell bluetooth mouse in ubuntu?
View 1 Replies
View Related
Jan 26, 2011
I have an issue with a bluetooth mouse. The mouse connects with the pc normally, and the bluetooth manager reports that the bluetooth device sends data. However, the mouse does not move the pointer, or seems to do any kind of effect on the pc.
View 1 Replies
View Related
