Software :: Installing Nmap (network Scanner Program In Fedora 10)?

Feb 11, 2009

i am having problem in downloading and installing nmap network scanner program in my fedora 10 machine...can any body help me from where i can download and install nmap using command line or ssh session on my fedora machine...

View 4 Replies


ADVERTISEMENT

Fedora Hardware :: Canon Pixma Mp280 Scanner - No Program To Connect

Jan 3, 2011

I recently got the printer part working by downloading from canon the correct rpm also in doing this I got the scanner driver. My computer tells me it is installed but I see no program to connect with my scanner. There is nothing in xsane or simple scan to allow me access to the scanner.

View 5 Replies View Related

Ubuntu Security :: HOW TO Installing NMap 5.20 In X64

Jan 22, 2010

If you have been trying to compile & install the new NMAP 5.20 scanning utility as a 64 bit user, you may have run into some issues as I did...The compiler will halt when you attempt to 'make', saying that you need to recompile using -fPIC.The fix: "./configure CXXFLAGS=-fPIC CFLAGS=-fPIC LPFLAGS=-fPIC"then rerun "make".I hope this helps someone, as it took me way longer than it should have to get this going. Enjoy the new versions as it is supposed to have 10,000 updated OS detection signatures and new scripts!

View 2 Replies View Related

Software :: Installing Bitdefender-scanner-gui In Fedora 11?

Aug 5, 2009

trying to get this package to install on my machine so i can hopefully use it to scan a windows partition on this disc.I've installed the basic bitdefender common package and it went ok. But, everytime I put in the command "yum install bitdefender-scanner-gui" The install starts up properly and i give the y/n confirmation. I've tried it about 3 times now and it gives me the Dialog below. I really want to fix my vista partition, I enjoy using it and i want to keep it on this computer, although im not agaisnt linux at all, but I have other machines for that.

================================================================================
Package Arch Version Repository Size
================================================================================
Installing:
bitdefender-scanner-gui i586 1.0-3 bitdefender 5.7 M

[code]....

Error Downloading Packages: bitdefender-scanner-7.6-3.i586: failure: i586/bitdefender-scanner-7.6-3.i586.rpm from bitdefender: (256, 'No more mirrors to try.')

View 3 Replies View Related

Fedora Networking :: Scan From Network Multifunciton Device - Using Scanner

Jan 9, 2011

I have installed a new network multifunctional device Samsung CLX-3185FN using the drivers provided by the manufacturer (Samsung Unified Driver). The printing over the network works fine, I can administer the device using browser. The only problem I have is using scanner over the network. It works fine if I disable firewall, but is blocked with firewall enabled. I can not figure out which ports or port-range I must enable for this scanner. Do you have any information on this one or how can I found out the necessary ports to open?

View 3 Replies View Related

Ubuntu :: Canon MX320 Scanner Not Able To Get The XSane Image Scanner To Recognize Scanner?

Jul 11, 2010

I just received a Canon Pixma MX320 as a gift.

I am currently running the Ubuntu 10.04 OS

I was able to get the printer up and running by downloading the printer driver for debian linux (3.1) from the Canon site without any problems.

Unfortunately I am not having the same luck with the scanner.

I tried downloading ScanGear MP for Linux (deb) (1.3) from the same Canon site but have not yet been able to get the XSane Image Scanner to recognize this scanner driver for my Canon.

View 2 Replies View Related

OpenSUSE Network :: Create A Home Network To Share Files - Scanner And Printer

Dec 31, 2009

I have four PCs in my house that are running opensuse 11.2 and I want to create a home network to share files, scanner and printer.

View 4 Replies View Related

OpenSUSE Network :: Firewall Yast2 Shows Ports Open, Nmap Shows Them Closed?

Jan 8, 2010

I'm encountering a strange problem. I need to open and forward all UDP and TCP ports related to VoIPtelephony (5000:32000) in the Suse 11.1 server that's acting as router/firewall in our setup. The ports must redirect to a Asterisk server in the local network. (This server has the IP adress 192.168.0.3)I've opened ports in Yast (Firewall>Ports>Advanced) and putted in some masquerading rulesirewall>Masquerading):0/0,192.168.0.3,tcp,5000:31000,5000:310000/0,192.168.0.3,udp,5000:31000,5000:31000when I do a nmap localhost I get:Starting Nmap 4.75 at 2010-01-08 16:52 CETInteresting ports on localhost (127.0.0.1):

Not shown: 991 closed ports
PORT STATE SERVICE
21/tcp open ftp

[code]....

View 9 Replies View Related

Fedora :: No More Mirrors To Try When Installing Program

Apr 5, 2011

I am having a problem with installing mysql and mysql-workbench. I installed a group of packages related to mysql on my system and it seemed to work fine. Due to an error in my setup, I decided to uninstall all the mysql packages and start from scratch. On my second try, I was able to load all he packages except mysql-workbench

I get the following error from the Add/Remove software application. workbench-5.2.30-1.fc14.i686: failure: mysql-workbench-5.2.30-1.fc14.i686.rpm from updates: [Errno 256] No more mirrors to try. why I can not get the package again to install?

View 3 Replies View Related

Ubuntu :: Installing A New Brother Printer+scanner?

Jun 16, 2010

About a week ago I installed my first Linux (Ubuntu 10.04). Since then I've been trying to get my printer to work by following some of the instructions on the web.Unfortunately,as a newbie, I can't seem to get it right... The printer is - Brother DCP-135C.

View 4 Replies View Related

Fedora Security :: Faking OS Fingerprint Scans (defeat Nmap)?

Oct 4, 2010

Are there any possible options to archive this w/ the 2.6.34 kernel? I know windows can do this w/ a button and BSD can drop packets when connected to closed ports...is IP personality usable in 2.6? Do I need work-arounds? any more options??Currently I've managed to @%#$ my OS fingerprints so results won't show as Linux.4/2.6...etc, but the problem is.. instead it's got the word "Redhat" in it (which is well... worse... because now.. if someone looks at my machine he/she'll know I am on either RHEL/Fedora )

View 14 Replies View Related

Red Hat / Fedora :: Make: *** - .obj/matrix.o - Error During Installing A Program

Feb 25, 2011

I am trying to install a program and it spews out an error about the .obj/matrix.o file.

The output is quoted here:

Code:

The program I was trying to install is a robot simulator which performs lots of matrix manipulation and linear system solving. I followed every step in the installation guide, except for this one:

On Ubuntu, all you need to do is install the following packages from the package manager:

libblas-dev
liblapack-dev

As shown above, I am using RHEL 6, which has different libraries with Ubuntu. I tried "yum search" and installed these libraries instead: lapack.x86_64 : Numerical linear algebra package libraries blas.x86_64 : The Basic Linear Algebra Subprograms library.

View 2 Replies View Related

SUSE :: Installing The Scanner Microtek Scanmaker 6000?

Nov 1, 2010

I have suse 11.2 and can't install my scanner microtek scanmaker 6000 bye sane project it is not support. Is there some one who let it work by a other driver ?

View 2 Replies View Related

Hardware :: Installing HP Flatbed Scanner Scanjet 3200C

Apr 11, 2011

Just found out that my old parallel port scanner will work with Linux (SANE told me so...). Since I have a laptop hp compaq nx9010 (Ubuntu 10.10) equipped with a parallel port I thought maybe I could take that into use. Question is: How? And do I have to have a printer connected to the scanner too?

View 14 Replies View Related

Fedora :: Installing Programs And Finding A Program That Plays FLV Files?

Mar 28, 2010

how to install programs, that i downloaded onto my windows XP computer,and they are for linux, i downloading it off a site.i just need to learn how to install it,and i need to find a media player that plays FLV files, as well as MP3 files, with the codec preinstalled,or how to install codecs.im sorry im really new to linux, i was considering switching to Mint, is that any better for media?

View 9 Replies View Related

Fedora :: Installing Wine - Add / Remove Program Install Both 86_64 And I686 Files

Jul 7, 2011

When I install wine the add/remove program wants to install both 86_64 and i686 files. I have the x86_64 version of Fedora 14. I am having problems with counterstrike and have installed it using Wine, have noted problems when both types of files are installed.

I would like to have Fedora set up just right but as with all Linux distros, am having trouble keeping my head above water with fc14. I have success up to a point and then want to go back to Windows for its simplicity. Just this wine problem

View 1 Replies View Related

Ubuntu :: Can Not Get A Network Scanner To Work / What To Do?

Nov 8, 2010

I'm trying to get a network scanner to function. I've been following the guides here:

http://ubuntuforums.org/showthread.php?t=1519201
https://help.ubuntu.com/community/ScanningHowTo

And I think I am just misunderstanding something.

1. The scanner is properly functioning on the server side.

2. Both, the client and the server, have the package sane-utils installed.

3. I changed /etc/default/saned on the server to RUN=yes (that was easy!)

4. Editing /etc/sane.d/saned.conf is what I think I'm getting confused on. The internal IP address of the server is 192.168.1.102 and the subnet mask is 255.255.255.0. The internal IP address of the client is 192.168.1.103. So, what do I put there? Is 192.168.1.0/24 correct? That didn't work!

5. Also, editing /etc/sane.d/net.conf on the client is confusing me too! What IP address should go there? Can I put the server name? What is the correct syntax?

6. I added saned to the correct group, lp. I made sure that the scanner was owned by the correct group by doing these commands:
sane-find-scanner
AND
ls -al /dev/bus/usb/XXX/XXX
The group was lp.

View 4 Replies View Related

OpenSUSE :: Use/setup Image-scanner On Network?

Jun 25, 2009

I have a printer/scanner/fax that's on the network. i have the printer part set up through cups but how do I set up the scanner? What programs can I use on opensuse to see the scanner?

View 9 Replies View Related

Ubuntu :: Use A Network-based Scanner? (RJ45 Not Usb)

Oct 28, 2010

I have a multi-function printer/scanner that plugs straight into the LAN via RJ45. Printing works fine, but I'm not sure how to proceed to set up the scanner. Just to be clear, I am not asking about connecting a usb scanner then sharing it over a LAN, that's different. This scanner plugs straight into the LAN.

View 5 Replies View Related

Software :: Clients Cannot Find Network Scanner?

Feb 5, 2009

I currently have a network with an older machine, which is (usually) operated in headless mode as a data & backup server, with a fixed IP of 192.168.0.10. I have two client machines, a desktop & a laptop, which use DHCP. All three computers are running Slackware-12.2, the clients with a full install & the server without any X components. I want to set the server to serve a scanner & have been following this link, which is mostly a rewrite of the man page for sane.d. I set up saned per the article, adding the saned:saned user. 'scanimage -L' works for both root & my local user on the server. I can ssh into the server as my desktop user & 'scanimage -L' works. Ditto if I ssh into the server, then 'su -' to root. I can scan either locally from the server or via ssh from the desktop machine. BUT, I cannot get the scanner recognized on the network. On the server, I have this line in /etc/sane.d/saned.conf:

Code:

192.168.0.0/24 this line in /etc/services:

Code:

sane-port 6566/tcp #SANE network scanner daemon & this line in /etc/inetc.conf:

Code:

sane-port stream tcp nowait saned:saned /usr/sbin/saned saned

I have changed the line in /etc/sane.d/saned.conf to just "+", for testing. That didn't work either. On the clients, I have these two uncommented lines in /etc/sane.d/net.conf:

[code]....

My server user is in the same groups, less vboxusers. The server is identified in /etc/hosts & I can connect to it via ssh & mount nfs shares from it. What am I (not) doing that is killing network scanning?

View 3 Replies View Related

Hardware :: Scanner Not Recognized In Ubuntu Epson Stylus NX510 Printer/scanner?

Aug 15, 2010

I was able to get my Epson Stylus NX510 printer up and running (after much issue), but I can't get the scanner working. I'm on a laptop, and the printer/scanner is wifi enabled and broadcasts with its own IP address. I can print with no problem, but xsane and simple scan don't recognize the scanner. I'm running Ubuntu 10.04 Lucid Lynx.

View 7 Replies View Related

Ubuntu :: Canon FB 630P Scanner Driver / Can't Get System To Recognise The Scanner?

Dec 14, 2010

How to get this scanner to work with Ubuntu 10.10

It's connected and printer is working through the scanner.But i can't get the system to recognise the scanner.

I'm all new to Ubuntu, and i thought it was easy and terminal is a totally new thing to me.

Is there a workaround to get this scanner to work through graphical interface install, or is terminal wisdom needed...

View 3 Replies View Related

Hardware :: Using Iscan By Epson CX9300F - Could Not Send Command To Scanner - Check Scanner's Status

Mar 17, 2010

After downloading and installing iscan and run it i see this message:

Could not send command to scanner. Check scanner's status.

After command sane-find-scanner:

And this message is result of scanimage command:

No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages).

View 4 Replies View Related

Hardware :: Getting Canon 8800F Scanner Working / No Other Scanner Found?

Sep 23, 2010

Recently got a Canon Canoscan 8800F after looking it up on the SANE site and said it was completely supported for Linux.

I have downloaded the pixma drivers and have compiled the command line program, but it can't find the scanner.

lsusb returns a Canon scanner Bus 001 Device 005: ID 04a9:1901 Canon, Inc.

and sane-find-scanner returns:found USB scanner (vendor=0x04a9 [Canon], product=0x1901 [CanoScan]) at libusb:001:005

but scanimage -L (under my user login or sudo) returns only the webcam. No other scanner found.

My system is running Linux Mint 7, ia64 kernel 2.6.28-11-generic

View 8 Replies View Related

Debian :: Sane - Share Epson Scanner Over Network

Apr 29, 2010

I have a debian server (squeezzy) amd 64, running with an epson BX-300f pluged to USB. And I want to share the scanner over my network. So let's do that, Intalled sane, sane utils, iscan, which I've downloaded from epson drivers and wich include epkowa drivers fro scanner to work..
after that I installed on my system (Ubuntu 9.10) xsane... on console I type:

root@bruno-laptop:/home/bruno# scanimage -L
*** glibc detected *** scanimage: free(): invalid pointer: 0x00be63d0 ***
WARNING: Unhandled message: interface=org.freedesktop.DBus.Introspectable, path=/, member=Introspect
device 'v4l:/dev/video0' is a Noname HP Webcam virtual device
device 'net:192.168.0.254:gt68xx:libusb:001:035' is a unknown manufacturer unknown device -- use override to select flatbed scanner
device 'net:192.168.0.254:epkowa:usb:001:035' is a Epson Stylus BX300F/TX300F/NX300/ME Office 600F flatbed scanner
device 'net:192.168.0.254:epkowa:usb:001:035' is a Epson Stylus BX300F/TX300F/NX300/ME Office 600F flatbed scanner

I don't know why I find so much things, if i only have one scanner. Then I opened xsane and found the scanner over network. I chose the epson with epkowa drivers I try to scan something but it dont output nothing and sometimes it gives me "end of file reached". I can put whatever config files here if you want to, just ask. One time it worked fine.. but only half of an image...

View 1 Replies View Related

OpenSUSE Hardware :: Scanner Works But Won't Network / Solve This?

Mar 19, 2010

Fresh install of openSuSE 11.2.
Laserjet 1220 multifunction device.

Successfully installed, network driver also installed, XSane shows both local and network scanner on local machine. Scans locally via both drivers.

However, networked scanner is not discovered by machines on local network, using XSane. Did a similar installation a few months ago with openSuSE 11.0, which works fine on the same client machine.

Have tried disabling firewall, but still no joy.

So, questions:

1] Is there anything I have missed?
2] Is anything known to be broken in 11.2?

View 9 Replies View Related

Ubuntu :: Share A Scanner On Network In Lucid System?

Jun 27, 2010

Assumptions:

Your scanner is installed properly and fully function. If you need to install your scanner first, have a look at the ScanningHowTo. To check if your scanner is connected and installed properly you can use the command "scanimage -L".
The machine we're configuring to use as the scanner server has the ip address 192.168.1.1 and subnet-mask 255.255.255.0. This means that this machine is on the 192.168.1.0/24 (CIDR notation) network/subnet. code...

View 9 Replies View Related

General :: How To Setup Network Printer / Copier / Scanner / Fax

Jun 19, 2010

I do not have the hardware to do this yet. I simply want advice on what route to take before I make the investment. If I had the money I would simply invest in a wireless combo setup, but I unfortunately do not. I do however have an idea. I am currently stuck with a standalone system that is running XP strictly for the use of magicjack. I was thinking I could hook up this combo machine to that computer and network it in via that. However, would the scanning capability only reside in the hardwired computer or could I do a network scan somehow?

View 2 Replies View Related

Software :: Sane Device Information For Network Scanner?

Jul 22, 2011

OS: CentOS 5.6 yesterday i bought a new HP network printer/scanner (OfficeJet Pro 8500). It installed correctly using hplip drivers. I can print and scan without any problem, very nice and fast device. I did some research where the information where the device port is stored in sane, but cannot find anything. I tried to remove my old network device port for my Brother scanner, but did not find the config file where this information is stored. Neither /etc/sane.d/* nor ~/.sane/xsane/* contains this information.

View 14 Replies View Related

Ubuntu Installation :: Device Busy Using Image Scan - Reports Could Not Send Command To Scanner Check The Scanner Status

Apr 9, 2010

Have Karmic 9.10 ,Changed from Epson RX595 all in 1 (uses a ton of ink)Got the Lexmark Pro 805 3 in 1 because it says it supports Linux and the ink cartridge only cost $5 downloaded drivers and printer works but using Xsane Image Scanner error reports

'Lexmark_1_0_0:libsub/001/009': Device busy Using Image Scan - reports Could not send command to scanner Check the scanner status. The RX595's scanner drivers had to been manually instatlled,, in the Printer box the Lexmark shows available..

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved