I installed GNUCash to try it out, but ended up not liking it too much. So I went into Ubuntu Software Center and pushed remove. It was taking really long (over 25 minutes) so I restarted my system. Now it is telling me I need to first repair the installation before I can remove it.I've been trying really hard to keep my system clean and organized and now this is bugging me
View 3 RepliesI have messed up Kubuntu due to the updates messing up. When I try to uninstall from Windows control panel i get an error message.
cwindowssystem32cdebit.exedelete
System cannot find the specified file
How do I uninstall?
I just installed hotot twitter client using sudo apt-get install hotot but now I don't know how to Uninstall it. I know this may be very easy but as I don't know the command line code
View 2 Replies View RelatedI recently installed Deluge 1.2.9 so that my brother might be able to use his Droid to control torrents remotely. Immediately thereafter, I began experiencing problems with installing and uninstalling any software I attempted to install or uninstall. The problem seems to be an inability to do something (not sure what) with my kernel. Here's the output from the last installation I attempted (Deluge 1.1.9 from Add/Remove Applications)
Code:
InstallArchives() failed: Selecting previously deselected package libtorrent-rasterbar5.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
[Code]...
I recently installed Ubuntu 10.10 (to make me do more work by taking away the distractions of Windows games etc) but for some reason it decided to install on a really small partition even though I left everything as default and so after about 1 day of using it and installing some programs it keeps warning me "There is only 11mb free space!" etc. and everything runs really slow because of this.
So I am wanting to uninstall ubuntu and grub so I can reinstall them but I don't know how to uninstall. In win7 if I go into Computer>Manage>Storage>Disk Management, there is no Ubuntu partition, just the 1TB partition that win7 is on, so I can't go about the "deleting the partition" method that people have given as a solution on this and other forums.
i downloaded the 11.4 ATI driver from their website. Then, i installed the driver using .RUN file. After installation, my graphics became worst and i cannot enable any effects. i went to system-preference...There were 4 ATI options (2 for the new one, 2 for the older one). i wanted to remove the newly installed 11.4.i went to additional driver and unistall the driver from there. but it uninstalll the older one. The 11.4 is still there in the preference.how to remove this driver i installed from RUN installer?
View 3 Replies View RelatedSo I used Wine to install Safari. First time I run Safari, it crashes. So I 'uninstall' it with Wine, except predictably Safari still opens after the uninstall. How would I go about removing Safari completely from Ubuntu? I can't even find my wine directory.
View 1 Replies View RelatedWhen I try:
sudo apt-get purge flashplugin-installer
I get:
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
nspluginwrapper
Use 'apt-get autoremove' to remove them.
The following packages will be removed:
flashplugin-installer*
0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded.
1 not fully installed or removed.
After this operation, 188kB disk space will be freed.
Do you want to continue [Y/n]? y
(Reading database ... 158395 files and directories currently installed.)
Removing flashplugin-installer ...
update-alternatives: error: unable to make /usr/lib/firefox/plugins/flashplugin-alternative.so.dpkg-tmp a symlink to /etc/alternatives/firefox-flashplugin: No such file or directory
dpkg: error processing flashplugin-installer (--purge):
subprocess installed pre-removal script returned error exit status 2
postinst called with argument 'abort-remove'
dpkg: error while cleaning up:
subprocess installed post-installation script returned error exit status 1
Errors were encountered while processing: flashplugin-installer
E: Sub-process /usr/bin/dpkg returned an error code (1)
Is there any way to force the removal of flashplugin-installer?
Got some links to remove wine, but its failing for me. When i search the installed rpm i can still see the wine rpms
Tried this command
Code:
Code:
Code:
I installed Fedora11 on my hard drive in e: . However i formatted my computer and installed windows XP professional after which i am unable to boot in for linux OS and unable to format the drive as well .
Now i want to format that drive to install ubuntu in the same drive. Can anyone tell me how to proceed . HOw should i format the drive and install ubuntu .
Running Ubuntu 10.04 and I'm trying to re-install Mac OSX back onto my MBP. I'm running competely off of GRUB and I have no other partitions for any other OSs running. Popped in my MAC OS CD and came up with this error.
Unable to mount location
Error mounting: mount exited with exit code 1: helper failed with:
mount: block device /dev/sr0 is write-prtected, mounting read-only
mount: wrong fs type, bad option, bad superblock on /dev/sr0, missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
How should I go about with removing Ubuntu, and re-installing MAC OSX?
I installed some programs with wine. Then I uninstalled them all following the commands given in Wine Wiki. I don't see them in the uninstallation GUI but ı couldn't remove one thing: When I right click on an mp3 file and choose "open file with", winamp is still there. How can I remove it from the list?
View 2 Replies View RelatedI installed Ubuntu 9.10 server on a HP Proliant DL380 G3 for testing. I neede to install some software from HP (Value add software pack) In this software pack I was unable to get one software up and running ( called hprsm ) I tried installing several times and allways ended with " The hprsm RPM installation failed! " I then tried to uninstall the software " dpkg --purge ... " and "rpm -e ... " and even " rpm -e --force-debian .... " but I can not uninstall it. Now when I install other software i keep getting " The hprsm RPM installation failed! " when I do " find / -name hprsm " I get :
[Code]....
I am running Debian 7.0 Wheezy amd64...I installed Debian's nvidia driver earlier but I was having a few issues with OpenGL. So I removed those drivers using "apt-get remove nvidia*" and installed proprietry NVIDIA's driver from their website.Now the issue is, my apt-get/synaptic does not work anymore because it is trying to remove xserver-xorg-video-nvidia and failing to do so.
Code: Select allThe following packages will be REMOVED:
xserver-xorg-video-nvidia
0 upgraded, 0 newly installed, 1 to remove and 4 not upgraded.1 not fully installed or removed.After this operation, 17.8 MB disk space will be freed.Do you want to continue [Y/n]? Y
(Reading database ... 194280 files and directories currently installed.)Removing xserver-xorg-video-nvidia dpkg: error processing xserver-xorg-video-nvidia (--remove): subprocess installed post-removal script returned error exit status 128.Errors were encountered while processing: xserver-xorg-video-nvidia.E: Sub-process /usr/bin/dpkg returned an error code (1)I have tried apt-get install -f to no avail.
How to take Backup & how to do restore in GnuCash. I need to take backup of my all accounts & all transactions
View 1 Replies View RelatedI am trying to replicate my GnuCash files between two computers. My GnuCash folder has three types of files:
* One Gzip archive file
* Many xac files (GnuCash Financial Data)
* Many log files
The xac and log files replicate with no problem. However the Gzip file does not. Without this Gzip file, GnuCash cannot makes sense of the other files.Why would this Gzip file not sync? Have others used Ubuntu One to sync their GnuCash files?
I'm trying to take off with GnuCash and I've been trying to work on the basics.
Here's my question: I don't want to enter all the details of bills sine there's another program for that. So I thought it would be right to enter the sales summary in the accounts receivable account and post the corresponding entry for the Sales account. Based on this,
1. What does the TYPE mean (I/P) on the receivable account?
2. I let it have I and now I want to go back and edit those entries but I can't seem to do that. It appears to be locked.
Running 10.04 64bit. Installed the latest Gnucash from repositories. Using Quicken 2003 and exported an account to a qif file. When trying to import to Gnucash the error "A bug was detected while reading the QIF file." displays. This, at least is more than I was able to do previously (prior to 10.04 and several earlier versions of Gnucash running in 8.04 through 9.10). Before it would cause Gnucash to crash and shutdown. I select a specific account with categories from Quicken to export. I can import to KMymoney and use it but that program is not compatible with the wife and does not do reconciliation reports by default.
View 3 Replies View RelatedAfter upgrading to 11.04 I've realized that the mt940 import is broken for Gnucash. No specific message on the console.
View 1 Replies View RelatedGnucash 2.4 has been released and I'd like to install it in my OpenSuSE 11.3 system. It isn't in any of the repositories that I have listed, although it might be in some repository I don't know about. If it's not in a repository, then I'll have to build it from source. I downloaded the source package and attempted to build it, starting with configure. I got as far as this:
configure: External QOF Disabled. Using Internal QOF Code.
checking dbi/dbi.h usability... no
checking dbi/dbi.h presence... no
checking for dbi/dbi.h... no
configure: error: Unable to find dbi/dbi.h
The perl-DBI package is installed, so that's probably not what it's looking for.So what do I need to do to install Gnucash 2.4?
The latest version of Gnucash available in openSUSE - and I checked the Gnome factory repo - is 2.4.0. The latest version from Gnucash was announced on Sunday and that was 2.4.5. Admittedly 2.4.1 doesn't seem to have been released and 2.4.2 had a bug in Windows but 2.4.3 was released on 27th Feb. Any reason why openSUSE seems to be lagging behind? Graham Davis, Bracknell, Berks. E-mail: change boy to man openSUSE 11.4; KDE 4.6.00; AMD Athlon X2 Dual Core Processor 5000+; Video: Radeon HD 2400 Pro; Sound: MCP61 HDA (nVidia); Wireless: BCM4318
View 3 Replies View RelatedI cannot uninstall Firefox, nor can I uninstall Chromium; one always stays if the other is uninstalled. For example, if I remove Firefox, Chromium will appear in its place and vice versa. This has got to be one of the weirdest bugs I've ever seen on Ubuntu! So, how can I uninstall both web browsers?
View 6 Replies View RelatedI'm running OpenSuSE 11.1 and trying to install aqbanking using Yast. Gnucash tells me this: The external program "AqBanking Setup Wizard" has not been found. The aqbanking-qt3 package should include the program "qt3-wizard".check your installation to ensure this program is present. On some distributions this may require installing additional packages.When I try to install aqbanking-qt3, I get dependency problems. How can I get past this?
View 4 Replies View RelatedBased on Product highlights - openSUSE, it would appear that using sqlite3 in gnucash would be available. However, I do not have an option to save an existing book to the database format, nor is it available when creating a new book - only xml is available. Is there anything special that I need to do to enable the sqlite backend?
View 2 Replies View RelatedI just installed fedora 14 and it rocks! The problem is gnucash. When I start it it throws the following error:
gnucash-2.3.15-2.fc13.i686 requires libwebkit-1.0.so.2
I tried to find such lib but it's not available. I noticed there's libwebkitgtk and then I created a symbolic link to it and gnucash works fine, except the menu bar doesn't appear. This bar is crucial for accessing some features what makes gnucash almost useless since I cannot import .ofx files for example.
I recently transferred my old Quicken data to GnuCash. That data includes some very old (15 years ago) transactions and accounts. How can I get rid of all transactions prior to, say, 1/1/2004? I would guess that the Close Book tool is relevant, but there's no documentation on it that I can find. I also want to get rid of ancient accounts, but when I try, I get a message to the effect that I can't delete read-only transactions. More generally, is there a place for asking GnuCash questions?
View 2 Replies View RelatedI use GnuCash on my desktop but want to be able to access it from my laptop. I can connect via sshfs to the program icon on my desktop but when I click it I am told I cannot do this due to security issues. does anyone know if its possible to get this to work?
View 1 Replies View Relatedi have a large data file for gnucash of several years in age. when i did the upgrade, gnucash starts and loads, and the main account appears to load, but there is nothing displayed. just an empty gray space where the alternating colors of the ledger should be.the account listing loads, and i can view other smaller accounts just fine. but the main ledger does not display. however, if i click on some areas of the screen, it will display what i assume is the underlying text in the bottom status bar.
and when a window or some other graphic element 'over writes' any area, some remnants of the former image remain.
I just did an install of Natty into a separate partition and incurred several problems. I have a Dell-DXP061 with 4 GB of memory and an Nvidia GForce 7300LE and a Dell 27in. monitor at a resolution of 1920x1200.
Initially it booted in to Ubuntu Classic as expected due to needing a proprietary video driver. So the first thing I did was to install the recommended Nvidia driver and attempted to reboot. It would not start either Unity or Classic. So I did a re-installation and then selected the experimental open 3D driver and was then able to bring up the system in both Unity and Ubuntu Classic. I installed a number of programs including cairo-dock, which I really like, emacs23, and gnucash. I have used gnucash for years and consider it a necessity. However, the Natty version will not display correctly the "gnucash-data" file I created with version 2.2.9 that I have been running on 10.10. This is almost a show stopper for me.
When I try to do a restart, the screen goes black, "Ubuntu" appears with the little dots, three of the dots change color and the system hangs. The system only stops when I hold the power button to effect a complete power outage. Interestingly the LiveCD did not seem to have a problem with restart.
I can see how a causal user might like the Unity interface, but I don't think that I am interested. I guess I will stick to gnome for a while, at least until Gnome3 and then I am not sure where I will go.
I can't install gnucash 2.4.7 on Debian 6,xfce environment with did not install the gnome environment
View 4 Replies View Related