The only user that can make the sound card work on a F10 x86_64 system is root. For non root users, I am not seeing any error messages when a app tries to use/access the sound card, just nothing plays. As I said, for root everything works as expected. I am sure this is a permission/setup issue, but I have no idea where to start.
View 3 RepliesI have motherboard Gigabyte GA-M61PME-S2P with nvidia hda sound card and I have no sound output using line in input. I've already tried to compile actual realtek linux driver but it didn't help. It looks ok because using gnome-volume-control I can see that there is music - volume bar is moving - and I can record it but I can't hear that on speaker live. I have also only 2 channel output hardware configuration. Alsa mixer have all channels but changing volume adjust didn't help. some information:
[Code].....
Recently I tried to install Fedora 12 x86_64 to my laptop. I ran the live fedora image from my cooldisk and then pressed "Install to Hard Drive" from live desktop. Then I went forward until I reached the partitioning section. Though I had ~28GB free space in my Harddrive, but it says: "Could not allocate requested partitions: not enough free space on disks." You can see my steps until reaching this problem in these 3
pics:
step1:
step2:
step3:
I captured these steps by using Fedora 12 Live printscreen tool. I tried to install Fedora12 from its non-bootable DVD too, but no difference! So there's only 2 situations:
1. I did something wrong -> install Fedora and use its partitioning tool.
2. There's a bug in Fedora -> confirm that this is a bug and say me an alternative way to install fedora.
I have fedora 12 installed in my system.But i cant login into it as root user even using 'sudo su'what to do?Each time i am having the following problem
[sujal@hclhome ~]$ sudo su
[sudo] password for sujal:
sujal is not in the sudoers file. This incident will be reported.
This TV tuner PCI card does not work with my linux. I tried it in a windows box and it worked great. I tried it with MythDora and found it non functional. Hauppage says that it should work with linux. VLC plays the out put of the tuner card just fine but cannot change channels.
Post added at 12:16 PM Previous post was at 01:48 AM this Linux box has 8 gigabytes of ram and is running x86_64 version of Linux
I've had this same problem in Ubuntu 10.10 and earlier and have never found a solution. I forgot how to change pulse audio and look at the MXSA because that was awhile ago and I haven't messed with Linux since. What have I done to try to fix this? I turned the sound up lol. It was on mute after install.
One thing I would like to mention that I have never asked about before is, I do not have a sound card, I used on-board audio from my motherboard. Could this be a problem?
I've managed to get some sound through the system with kernel 2.6.40.1. I use multiple sound cards, I have problems with keeping the same order. I added in etc/modprobe.conf The list of sound devices, putting my D66 card as device 3, Rebooted and cat /proc/asound/cards showed all fore devices in the correct order. I got audio through one of the apps , and started to try and get another ,wsjt, to function.
[Code]....
I have ATI graphic card with HDMI video and Audio:
I see that I have HDMI connector and S/PDIF connector on the mortherboard, I just have HDMI connector on the monitor, I have no problem with the video but the audio does not work, I just want to confirm that the audio should also go throught the HDMI cable right ?
Here is the output from the alsa-info.sh script.
Today I got update notification. I type in terminal yum update, and get this error: Quote: Error: Missing Dependency: libnetfilter_conntrack.so.1()(64bit) is needed by package iptstate-2.2.1-5.fc11.x86_64 (installed) You could try using --skip-broken to work around the problem You could try running: package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigest
I removed iptstate.x86_64, again run yum update, and than, ibnetfilter_conntrack got installed. I tried to install iptstate.x86_64 again, but i get Quote:
[Code]...
I created an EC2 instance with Fedora 12 x86_64 about a month ago. I have been getting an hourly system log error:mcelog: Cannot open /dev/mem for DMI decoding: No such file or directoryI was ignoring it because I did not notice any implications, until now.I am running MongoDB on this machine, and reads from /dev/urandom are failing. I know reading from /dev/urandom shouldn't fail, so I think this system error may be the underlying problem.Are these two issues connected?If so, is there a way to fix this without having to completely reinstall the OS?
View 5 Replies View RelatedI am a total Noob, I couln't find the answer to my question anywhere. I need to run Matlab with 4GB of RAM and I have been told Fedora 64bits is the best environement for that. I downloaded the iso for the Fedora 14 x86_64. I first booted using the live CD and was surprised to see that only 3.4GB are recognized. The computer is a HP with dual core 64bits intel cpus and the motherboard is supposed to handle until 8GB of RAM, I have currently 2 x 2GB installed.
I thought it might have been a problem from the live CD and I proceeded to install, but still same problem, only 3.4GB recognized. Most threads I have found mention the PAE kernel but from what I understand this only applies to 32bits Fedoras ?
I've tried to ssh in as the root user w/o a password (RSA keys) but I've had no luck as the root user. I've tried the exact same commands with Debian 5 and Centos 5.5, without a problem. Fedora 13 and 14 won't work! I can only log in w/o a password as a normal user, never as the root user! It always asks for the password if I try as root. I've even tried copying Debian's and Centos's sshd_config file and restarting sshd, but it still won't work.
Code:
mkdir ~/.ssh ~username/.ssh
chmod 0700 ~/.ssh ~username/.ssh
echo "ssh-rsa AAAAB............Jw8V03loeZ username@thehostname" > ~/.ssh/authorized_keys
[code]....
strace wget www.google.com:
...
write(2, "Connecting to www.google.com|74.1"..., 51Connecting to www.google.com|74.125.115.104|:80... ) = 51
socket(PF_INET, SOCK_STREAM, IPPROTO_IP) = 3
[code]....
i want to put LISA working under my x86_64 but i receive a error because the fault of cpp wich i have in the /lib, so i don't understand that fault
checking for g++... no
checking for c++... no
checking for gpp... no
checking for aCC... no
[Code].....
I have just installed Fedora 12 on my old AMD64 desktop. The install went fine, I then set about adding various useful things like skype, flash plugin- some manually, some with autoten.
Upon rebooting, the system hangs. Looking at the text startup, the last line before it hangs is:
Starting jexec servicesStarting yum-updatesd: [OK]
After this line appears, the display flashes repeatedly then does nothing. It sits there with the text showing (or on graphical startup, the splash screen disappears) and a cursor flashing.
I think the problem may be with the nvidia driver I installed with autoten, which I suspect is wrong for my system (think my graphics card is too old).
Does anyone know how I might remove the driver given I can't get as far as logging in at the moment? Or am I wrong and the problem likely to be something else?
Fedora13 x86_64 not support SATA3, can only degrade switches over SATA2 the slot. Hoped that fedora 14 will support SATA3 the device.
View 6 Replies View RelatedI can not start fedora 15 because i take this message:HTML Code:Starting udev wait for complete device initialization failed, see ' system ctl status udev-settle.service for details
View 2 Replies View RelatedBy default, Fedora x86_64 only installs 64 bit libraries under /lib64 when OS installation! I think, it is not very good because there are so many 32 bit application software, without 32bit library, 32bit application can not run at all! Why Fedora not install both libraries by default, any concern?
View 2 Replies View RelatedIf sound on F12 works as root user but not as a normal user, try this simple fix! I've been struggling to get sound working as a normal (non-root) user since F10. Until now I've had to run X as root user to get any sound out of my machine.
Sound actually works OK now for me as a normal user. Here's how I fixed the problem.
First I uninstalled pulseaudio with:# yum remove pulseaudio Then reboot back to the hardware. You might want to keep pulseaudio, but I have no need for it. PA wasn't running on my system anyway.
Running X as root user, I did the following: As a test I opened a root shell and typed the following:
[root]# alsamixer c0 That started the alsamixer OK, and all the controls were accessible.
[Code]...
I am interested in making the root file system is read-only. I've moved /var and /tmp file systems to another partitions. There are two files in the /etc directory that need to be writable.
These are:
I've moved this files to /var and linked it. I've added command to the /etc/rc.d/rc.local file:
That's it. Are there other solutions to make the root file system is read-only?
I have just bought a new PC with an ASUS M4A78-AM motherboard with integrated VT1708S 6-channel sound chip in it, so I freshly installed fedora 12 without any issues However, I can't get the surround sound working. I have searched many forums a lot, and haven't found any solution yet.It seems that even the SPDIF output does not work on this sound card, and that is what people talk about on almost every forum / mail list. So I was unable to find almost ANY information regarding ANALOG surround sound.
The motherboard has 3 jacks on it - green for FRONT / 2 speaker set; blue is the line in OR THE REAR-SPEAKER out, and pink is the microphone OR side speaker out in the 6-spk configuration.My speaker configuration is 4.1 [2 front, 2 back and subwoofer]. Line out does not produce any sound.I have uninstalled pulseaudio [sudo yum remove pulseaudio]Now alsamixer shows a lot of controls, but even if I unmute line out and set it to max, it is still not producing any sound.
I am trying to make a d-link dwl-650+ pcmcia card work through ndiswrapper method following the direction at:[URl]... The first step there is to install the "kmod-ndiswrapper" via yum.
But, how would I just download this package to a usb drive so that I can transfer it to the laptop that needs wireless networking. Is there an option in yum where I can just download the package, not intstall, so that I can save it somewhere?
I have Fedora 10 x86_64 installed on my Think Pad T61p and when ever I put it to sleep and then try to wake it back up, it doesn't wake back up, all I get is a blank screen
View 2 Replies View RelatedI installed Fedora 10 x86_64 from DVD this weekend. Once the install was completed and I booted into the new install, I ran the Software Update expecting to find and download security updates. However, to my surprise no updates were found! The install DVD was downloaded and burnt to DVD about two weeks ago. Did the installer fetch and install the F10 updates? Or did I mess up my install and/or configuration of F10? I remember when I installed F9 there were a lot of updates found right after the install.
View 14 Replies View RelatedFor the last couple of days I've been trying to install Fedora 11 x86_64 without success on my new machine, specs below. Intel Core i7-920 2.66Ghz MSI X58 Pro 7200 SATA Drive (can't remember the make) 6GB RAM So first off I tried install the 32bit live cd and that worked without any problems and installed fine. Only problem is I need access to the full 6GB of RAM so I really need to switch to the 64bit version.
I downloaded the full x86_64 install DVD and burnt it off. Rebooted and began the installation. It was going fine until it started installing the packages. The install seemed to freeze, although the mouse would still move. I left this for 10 minutes just incase it kick started again, but there was no HD activity or DVD activity so I gave up and rebooted to try again. The next time I started the install I had problems with it freezing while partitioning. I was beginning to think something was up with my hard drive or the drivers for the hard drives controller weren't working correctly (could still be the case).
After about 20 attempts with it freezing at various points I gave up and decided to try the x86_64 live cd. This booted with no problems so I started the install from the desktop. First thing I noticed was a kernel error pop up after I started the drive partitioning. Something about dereferencing a pointer in the kernel (0x20) (sorry no additional info at the moment, if needed please ask). This got me thinking the kernels not playing nice with my setup. However, it let me continue and copied the live image onto the hard drive. Then it started going through the post installation steps and this is where I got another kernel error (again I can get this if needed) and the window froze and all activity seemed to stop again. Has anyone got any ideas what could be causing these problems. I've also tried a CentOS 5.2 x86_64 version I had lying around and this had similar problems (although this does use anaconda as the installer too).
I need to develop application for 32 bit environment.
Before to install FC11 64, I used FC 9 and FC 10 i386 version without any issues.
I'm lookking for a tutorial about use 32 bit development environment in a 64 bit OS.
How or where I can setup FC11 for this features.
Just installed wine from repository.Trying to install a windows application, but getting the following:
$ wine "f:Setup.exe"
Trying to load PE image for unsupported architecture (I386)
Trying to load PE image for unsupported architecture (I386)
[code]...
I have installed last updates about 3 days ago. After this Fedora kernel 2.6.30.9-99.fc11.x86_64 does not start.booting it the last message I see"ADDRCONF(NETDEV_UP):wlan0: link is not ready" then it stops. I have to boot with a previous kernel version 2.6.30.9-96.fc11.x86_64.
View 2 Replies View RelatedI have an issue with kernel-2.6.31.9-174.fc12.x86_64. I ran the updates on Christmas Eve and it updated from kernel-2.6.31.6-166.fc12.x86_64 to kernel-2.6.31.9-174.fc12.x86_64. When I rebooted, I no longer received the Fedora Bubble boot screen. It comes up with the Fedora boot bar (across the bottom). Also, I receive failures during boot with the following:
[Code]...
I just installled Fedora Core 13 for IA64
I installed to disk from the LIVE CD namely
Fedora-13-x86_64-Live.iso
After it was installed and rebooted everything worked fine EXCEPT that yum did not have any repositories!
Can anyone with a successfully working yum on FC13 IA64 please post the contents of /etc/yum/yum.repos.d