Ubuntu :: Linuxant Drivers Will No Longer Install?
Apr 30, 2011
I am trying to install the Linuxant ALSA driver on 11.04 from [URL]
From the error log:
Code:
287 /usr/lib/alsa-driver-linuxant/acore/pcm_native.c: In function 'snd_pcm_hw_params':
288 /usr/lib/alsa-driver-linuxant/acore/pcm_native.c:489:2: error: implicit declaration of function 'pm_qos_remove_requirement'
[Code]....
This worked fine on Ubuntu 10.04 (didn't try 10.10). Any way to work around this? Not having sound means Natty is kind of useless =/
View 4 Replies
ADVERTISEMENT
Apr 24, 2011
Basically everything was going fine, and i was enjoying the OpenSuse experience, then downloaded djl (Games Launcher) , installed some games and found that i had a very very very bad frame rate (about 1FPS), and my GPU is a NVIDIA GTS250 (1GB), and runs most games flawlessly under m$, so i went about installing the graphics drivers for my card. I followed the instructions and was under the assumption that i installed the correct ones, but now i cannot boot into any graphical interface. I think that it should be a graphics issue, as this was one of the few things done before rebooting. I have tried booting into the normal mode, and the failsafe, I have read many other "Not booting'' posts, and have tried their solutions without success, there include: Changing the boot parameters Logging in and manually trying to boot up the gui (init 3.... init 5... etc)
When the computer tries to load up OpenSuse in normal mode, it comes up with the normal loading screen, and then about 90% of the way it stops for about 30 seconds, and then switches over to a CLI, asking for a login, going through the log a couple of things fail, did have these noted down (but cannot find and will post along with other commands that i am asked to do) I want to try and avoid a reinstall as it took me a long time to get the WiFi card working.
View 9 Replies
View Related
Apr 14, 2011
Months ago, I tried to get my notebook's internal modem working, by installing alsa-driver-linuxant-1.0.23.1-1.noarch.rpm and hsfmodem-7.80.02.06x86_64full-1.x86_64.rpm, both from Linuxant. This did not work, but my system was stable and the sound device (Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)) worked fine.In the last few days, I upgraded to the latest kernel 2.6.35.12-88.fc14.x86_64. Boot failed due to an inability to build the alsa-driver-linuxant against the kernel source (I have the kernel source in /usr/src/kernels/2.6.35.12-88.fc14.x86_64/). The message in boot.log was:
Code:
ERROR: Build failed. Please review the build log at /var/run/alsa-driver.1367.log.
/var/run/alsa-driver.1367.log contains the error:
[code]....
View 4 Replies
View Related
Feb 4, 2010
I had, with much delight, accomplished a dual boot install of Ubuntu 9.1.0 and Windows 7 the other day and everything was working perfectly fine. However, I decided to activate the proprietary Nvidia drivers that were available in the drivers menu and my system subsequently no longer operates. After installing and rebooting Ubuntu will no longer work and becomes stuck on a black screen with two white dashes in the top right had of the screen.
This hang up occurs directly after the first white Ubuntu logo appears during the startup and the only key that will work during this screen are Crtl + Alt + F1, which only bring up a second black screen except with a solid white dash in the top right screen. At that point no key will work. I have tried to fix things in recovery mode and used envyng to remove the nvidia drivers as well as other operations, however the same result still appears when I try and run Ubuntu. I own a Sony Vaio Z690C if it makes any difference.
View 1 Replies
View Related
Aug 6, 2009
I ran an update yesterday ( like i do most days ) and now my dual screen doesnt work and when i load the nvidia conrol panel it says to run a command as root ( summat liek nivida-xorg ) it then does something tomy xorg that then completely breaks it.
I havent made any changes other than the update.
How do i get nvidia installed properly again?
Im currently running on a strange screen with 2 black lines on the sides and a bad res.
I fear its borked it royally?
View 4 Replies
View Related
May 8, 2010
I know i know, some will say "eww Proprietary Drivers" but hey, ubunt is all about having more control of the OS. Is there an easy way to install Proprietary Drivers thats not through the hardware drivers option on system?
View 2 Replies
View Related
Mar 7, 2010
[URL] I just updated and then saw this news , whats the solution for me, I either want to go beta or downgrade, If i try to boot to previous kernel, boot hangs in graphic mode, I cant start X and gdm . How to install kmod with beta drivers? Or whats the solution, nvidia ver: 195.36.08
[Code]....
View 16 Replies
View Related
May 9, 2011
after few years being limited with my pc configuration (windows OS) I realized that linux or it's distributions is the best invention in 21 century. And finally I am starting use it. openSUSE 11.4 installaition succesful, I updated it and it looks I don;t have any problems, but I got few questions.
1. How install older version of mozilla firefox internet browser here? I can't install some plugins because it's a firefox beta 12 version, for example. I am quake fan, o I like play quake live, but i can't install quake plugin, because my firefox is beta version.
2. Does I got all drivers instantly installed to my mashine? ATI video drivers, sound drivers ect??
3. Are there any How-To guides which can teach me, how I can improve my desktop? gadgets, 3D desktop ect...?
View 5 Replies
View Related
Sep 4, 2010
I verify in Intel site that my Intel'drivers are outdated, because Dell Suport is slow, so how do I update them in Opensuse?
Do I use Virtual Machine or try through Wine?
View 4 Replies
View Related
Apr 28, 2009
I have a new dell inspiron 1545 since i am facing problems with vista i wanted to work with linux operating system (fedora 9). I want to install the video drivers and sound drivers for my laptop..When i installed fedora 9 my screen resolution was 1366x768 but suddenly now my resolution is 1024x768. I tried to change the resolution but I am unable to find my laptop resolution. What could be the problem
Here I can see my video card and sound card.. I want to install the drivers for my cards
View 3 Replies
View Related
Sep 19, 2010
I experience this since kde 4, but it never really was that bad because once in a while on updating kde I also deleted the .kde folder in my home-folder and everything was fast again.
But I haven't done this for a while now and kde take really long to load. Is there any folder to clean up there without deleting the whole .kde-folder and loosing all my settings again?
View 14 Replies
View Related
Mar 1, 2011
Installing Ubuntu 10.10 desktop.on a Highpoint rocketraid 2642.Installing Ubuntu, it does not find the drive?How do I install the drivers to install and boot after the installation from the raid drives?
View 1 Replies
View Related
Mar 10, 2011
Everything went fine but whenever I rebooted, Ubuntu 10.10 was not an option in the boot list. However, Windows shows up and boots just fine. I am currently tri booting (not sure if that's the correct term) Windows 7, Ubuntu 10.10, and OpenSuse each on a hard drive of their own. In the dolphin file manager I can still see all the files for Ubuntu so I know it was not partitioned over or deleted.
View 7 Replies
View Related
Jul 7, 2010
Synopsis: I wiped my system and am using ubuntu 10.04 with no problems *except* that I now need IE 8 and MS Excel/Access/Powerpoint/Word for classwork. I kind of tried toying with WINE, but ultimately would rather just have a dual boot.
What occurs when I try a (any) Windows install (keep in mind I even swapped out a fresh Sata HD and the same problem occured:
Pop in a Windows ISO bootable CD>everything acts normal and I follow the prompts for a fresh install (not an upgrade)> It begins the install but the first part where it is "copying files" just goes to 100% in a split second>Then it moves down to the next prompt of "Expanding Files" at which point the laptop is spinning the disc/reading it but it just stays at 0%.
So, it's not a HD formating problem, right? I wiped the system, reformatted and got the okay from Windows that I could install so I assumed I reformatted it back to NTFS.
View 2 Replies
View Related
Oct 15, 2010
I just installed a minimal version of Ubuntu 10.10 (with Openbox) over 10.04. Mainly everything's ok, but I have three problems:
1. When shutting down or rebooting, my speakers make a loud pop. Upon googling around, I found this topic on the Arch forums. Running
Code:
Before rebooting/shutting down works. I, however, would like to have this permanently fixed so I don't have to run these commands every time before rebooting/shutting down.
2. I can't install the ATi video card drivers. I downloaded the correct driver (10.9) from the ATi website and made sure I had the packages found here installed. I also made it executable by running
Code:
When I run the installer, using
Code:
I get this output:
Code:
3. When booting, I get a message saying something like "intel_ips can't find i915 symbols, so graphics turbo is disabled". When googling for this, I see this is a kernel related issue. Since I don't have any understandings of kernels, I thought this is a little too high up for me. What does it mean and how can I fix it, as it slows my boot down quite a bit?
View 5 Replies
View Related
Aug 26, 2011
after upgrading 11.3 to 11.4 with zypper dup my logical volumes are no longer accessible The YAST Partitioner recognize them as Linux Raid but I could not mount them.
linux-dv06:~ # blkid
/dev/sdb1: UUID="3ed0f7a9-8986-254c-a14d-c8941769f33a" UUID_SUB="b558e84e-6369-8803-f65f-455bd0e5f0f7" LABEL="linux-2zun:0" TYPE="linux_raid_member"
/dev/sda1: UUID="482595d1-cbf0-43fb-8026-1ed4d1229fbc" TYPE="ext4"
/dev/sda5: UUID="f30bb3a9-2690-403f-9f45-45c3379a512b" TYPE="ext4"
[Code]....
View 2 Replies
View Related
Jan 6, 2011
I was using tripleboot system in one hard drive. That included Windows 7,Ubuntu 10.10 and Ubuntu 11.04. And yesterday I decided to added openSUSE 11.3 at another partition. I'm using Ubuntu 11.04 grub2 as bootloader.
At first there was no problem. All OS detected well, but after opeSUSE online updates last night my openSUSE partition won't boot. First, at boot I chose openSUSE and it said "Boot kernel first" and nothing happens. And then I boot to ubuntu and ran update-grub then I saw grub no longer detected openSUSE partition.
View 9 Replies
View Related
Oct 9, 2010
i have just installed fedora over a existing copy of ubuntu. The problem is i cant boot in to vista any more. i have looked over many forums trying to fix it but still wont work.the attachments are of screen shots i have with the details of the hard drive partitions.i am able to mount the hard drives and have all the data still and still have the boot folder for vista but just cant figure out how to boot in to vista.i also get the error " error 1: filename must be an absolute pathname press any key to continue" i get this error when i try to change the boot partitons
View 4 Replies
View Related
Jan 28, 2010
I've run into a strange problem recently. My primary OS right now is Windows 7, and OpenSUSE is secondary. I had GRUB as the bootloader, and everything seemed fine, but I ran into one problem in Windows 7: one program refused to work correctly with ATI forced anti-aliasing on, but it is needed by others (or else edges look jagged).So I decided to install ATI Tray Tools. But it seems that Windows 7 is being evil and won't let install drivers that their creators didn't pay Microsoft for (thank goodness that's not the case in Linux). That means I had to use a driver overrider program, and that means that it had to change the Windows 7 BCD options. And that's where bootloaders kick in. It seems that Windows 7 is too lazy to check for its BCD on other than active partitions, so it doesn't allow the overrider to function.
So what I did was change GRUB to boot Windows 7 with makeactive flag. The problem now is - it won't deactivate! I no longer get GRUB's boot screen, it just boots to BCD directly. So my question is - is there a way to deactivate (or, rather, reactivate the /boot partition) after Windows 7 shuts down or restarts automatically? Obviously I don't want to use GPartEd each time I want to boot to Linux.
View 7 Replies
View Related
Jan 16, 2011
I updated my GRUB config. I reordered some menu items and set openSUSE as default OS.When I boot into openSUSE, I am no longer greeted by Geeko when openSUSE is loading. I only see text from the boot procedure scroll by like it's still the 90s. While there's a certain coolness in seeing openSUSE switch to runlevel 5 and all that jazz, I want my chameleon back.A few weeks ago, I configured openSUSE to boot with flag vga=0x3ef so that it would boot with my preferred resolution immediately. This used to work fine. Since this morning, openSUSE crashes when X is attempting to start. I can still boot into openSUSE by removing that flag, but even then I still don't see the chameleon.
View 9 Replies
View Related
Mar 19, 2011
I have new install of 11.4 X86_64 which has been working fine up until this morning. Now when I boot and get the kdm login screen, the keyboardis no longer working, nothing appears from typing, no key sequences are recognized. The mouse works fine and when I go Console Login, the keyboard works fine.The mouse and keyboard are both Logictech wireless using the Logitech unifying usb link. As I said, it was working fine until this morning.I have no idea how to even diagnose this.
View 8 Replies
View Related
Dec 14, 2009
I'm trying to install some wireless drivers, but apparently I don't have a /lib/modules/<kernel>/build directory, which is causing the Makefile to throw an error. Is there a specific place I should point the Makefile at?
View 9 Replies
View Related
Jul 19, 2010
I want to clean my system out of old packages. I can use rpmorphan to find orphaned packages, but how do I find packages that are not longer present in their vendor repository?
View 2 Replies
View Related
Aug 26, 2011
I've had everything but /boot on LVM LUKS encryption since I installed 11.4 on my netbook. Suddenly it won't accept my password and boot. Nothing had been updated since the last successful boot. The only possibly different thing that occurred was that I had plugged in my Android phone to charge before it booted up. Anyway, the specific error it gives when I enter the password (and I'm absolutely sure it's the correct password):
Code:
No key available with this passphrase.
Here is everything else on the screen:
Code:
doing fast boot
Creating device nodes with udev
[number (not sure if relevant/unique)] fb:conflicting fb hw usage inteldrmfb vs VESA VGA - removing gen
Volume group "system" not found
[Code]...
View 9 Replies
View Related
Aug 16, 2011
when i login, Ubuntu asks to install 3D Drivers for my grapics card. Can i make a script in openSUSE to do this as well? Or even better, check for drivers on startup and then install the drivers for the graphics card on boot.
View 5 Replies
View Related
Feb 19, 2009
So far I've tried gOS, Linux Mint, Ubuntu, and SuZE. The result is the same: The live disk runs, opens up but the graphics are shoddy, sound doesn't work, everything is very slow, and in attempting to partition and install the os, it stays at "Resizing partitions 0%"I know Live disks are going to be a bit slower, but this is super slow and this computer is just a few months old. Usually the live cds have a database of drivers for common media but it just isn't accelerating the graphics or even recognizing my wireless. I know its not the CDs because they work fine on other (much older) computers.
View 2 Replies
View Related
Sep 24, 2010
Due to a power outage, my EXT4 file systems (which contain /usr and /opt) no longer mount at boot-up. They are, however, seen by disk utility in Knoppix, so I assume the data is still there and that it's just matter of making a connection to it.
View 6 Replies
View Related
Jul 21, 2010
I am using Ubuntu 10.04 on a laptop with a Synaptics touchpad. While testing an install of Bluetooth drivers I booted my computer into recovery mode so I could find out if Bluetooth worked before networking was installed. The system reconfigured the graphics to low VGA which disabled the mouse. I rebooted (normal startup) uninstalled the bluetooth drivers, but my mouse still won't work. The mouse pointer appears in the middle of the computer screen, and stays there.Enabling mouse keys support enables me to move the mouse by holding the Function key and pressing numpad characters,t this is only a temporary solution.
View 2 Replies
View Related
Sep 20, 2010
How to install PDO_FIREBIRD, PDO_IBM, PDO_INFORMIX, PDO_OCI, PDO_4D drivers for php?
View 1 Replies
View Related
Oct 10, 2010
have I to install my pc drivers after the ubuntu install?
View 2 Replies
View Related
