I installed ntop on top of linux server. Now I need to collect netfow data from the cisco routers.Here's the command I
used.
ip flow-export source fastethernet 0/0
ip flow-export version 5
ip flow-export destination <ntop server ip> <port>
[code]...
I am trying to monitor server throughput with a centralized ntop instance running as NetFlow aggregator and various NetFlow probes (nProbe, fprobe) on the Servers.ntop shows the probe as NIC correctly and receives the data, but it only shows one Host under "Hosts", which is the server itself. I expected to see a host list just like it is shown when running ntop locally (i.e. the server ntop runs on and every host he contacted separately). This happens both when using nProbe and fprobe. Have I misunderstood the concept of NetFlow Aggregation or am I using ntop/nprobe wrong?
View 1 Replies View RelatedI have setup NTOP on Centos 5.5 and am not seeing traffic that I am supposed to be seeing. We have a product that uses many different services including ssh. I have this system as a target on mirrored ports but am not seeing any ssh connections or activity when I look at the host machine that is connected to the target ssh client and vice versa. When I look under TCP/UDP Service/Port Usage it is not displaying all the services that are being used especially SSH. What could it be?
View 5 Replies View Relatedi am using ntop with squid for bandwidth monitoring but i am not able to see yesterday and old reports on that and i am not able to take the backup.
View 3 Replies View Relatedntop installed on CentOS5 system running as squid using yum. Starting ntop on command line and not as daemon and gives error for illegal filter.
Code:
Fri Aug 20 14:10:12 2010 NOTE: Interface merge enabled by default
Fri Aug 20 14:10:12 2010 Initializing gdbm databases
[code]....
I have installed version of ntop 4.0.3 by guide.But I can't start ntop daemon/service. I didn't find a service file for starting.During the installation there was no problem only want to RRDTool so I installed that. Now there is no necessary package required.
View 1 Replies View RelatedI installed it from the packages list and the eye candy has been good.
However, in trying to fix an error showing up in syslog
Feb 1 17:37:38 host ntop[30764]: **ERROR** Buffer too short @ dataFormat.c:144 (increase to at least 56) [230982 years, 187 days 7:107374]
I started looking at the configuration files; well attempted. It asks for a login. It isn't any user or root, but apparently is admin, but IO don't ever remember setting it.
Various web search suggests it is done at compile(downloaded compiled) /installation, but I have no recollection of entering any.
There is a Redhat/Centos wrinkle ntop -set-admin-passwd=password; but that puts out a lot of lines, then hangs and has no effect.
Note, despite message(old version of ntop), it is up todate in packages.
I have installed ntop and it works fine, but I do not use it every day. Somehow it installed to start on boot. I do not want it to start automatically at system start/boot. I looked and searched, and looked some more but I can not figure out how to stop it from starting at boot time. I'm using Unbuntu 10.
View 1 Replies View RelatedI am not able to installed ntop ( network monitor tool ) while run below command, i have got the error #./autogen.sh configure: error: Unable to find RRD at /usr/local: please use --with-rrd-home=DIR
View 10 Replies View RelatedI'm looking for a monitoring tool like ntop, but can preserve statistics for http traffic.
View 1 Replies View RelatedI recently installed Deluge 1.2.0 from the following PPA:[URL]I using this on two different Linux computers. One is running Linux Mint 8 and the other is running Ubuntu Netbook Remix 9.10. The first time on either computer when I enable WebUI in the Deluge GUI it works fine. However if I ever disable it in plugins section I am subsequently unable to re-enable it (doesn't appear in the side panel again). Rebooting or reinstalling Deluge seems to have no effect.Is this a bug or am I doing something wrong?
View 3 Replies View RelatedHow to recompile squid under fedora 13 to insert this arguments ---> --enable-storeio=diskd,coss
View 2 Replies View RelatedInstalling file sharing using eBox and get the following error:
[Code]///
I am trying to install the IDS component barnyard2 on RHEL 5. I am following the snort enterprise insall document by Patrick Harper. For installing barnyard, after the tar command it says to perform a ./configure --enable-mysql The --enable-mysql does not work: configure: WARNING: unrecognized options: --enable-mysql --with-mysql does work. Is there a difference? Next, using --with-mysql, I get a failure at the end:
ERROR! Libpcap library/headers (libpcap.a (or .so)/pcap.h) not found, go get it from Open Source and Linux Forums dot tcpdump dot org TCPDUMP/LIBPCAP public repository or use the --with-libpcap-* options, if you have it installed in unusual place. Also check if your libpcap depends on another shared library that may be installed in an unusual place I do a find / -name libpcap* and get:
/usr/share/doc/libpcap-0.9.4
/usr/lib/libpcap.so.0.9.4
/usr/lib/libpcap.so.0
/usr/lib/libpcap.so.0.9
/usr/lib64/libpcap.so.0.9.4
/usr/lib64/libpcap.so.0
/usr/lib64/libpcap.so.0.9
How do I tell the configure to use one of the above? I don't understand how to use the --with-libpcap-* option?
I've installed ACL on my Ubuntu:
aptitude install acl
What is the next step ? /etc/fstab ?
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
[Code]....
I've been running 10.04 on a partition of my Dell laptop successfully for weeks. Now, I get the login screen, and when I give my username and password and click "Ok" it logs in, looks like X starts, then immediately goes back to the login screen with the drum sound (is that a bell?). If I type the wrong password, it doesn't log in, so I know it's getting past authentication.
I've tried logging in as one of several users.
I've tried running in recovery mode and running "clean", running "repair packages" (it downloaded and installed a lot of packages), running in safe graphics mode (failsafeX). None of those had any effect.
I've tried looking in /var/adm/messages and looking at X logs that are presented in safe graphics mode. I see tons of stuff, and none of it obviously stands out as an error.
It is likely almost out of disk (maybe 300M left?), but I can't find evidence that that is causing this problem.
I'd like to somehow repair my Ubuntu install without wiping it.
I would like to enable more tty's.
I am using Maverick Meerkat .
After reading some about it, it seems that I could copy and rename any
off tty /etc/init/ttyx.conf (expect tty1 which is special for security mode _and_ normal mode)
But after reboot whit tty12.conf - the screen went wired and a lot of error-messages was all over the screen, so I had to remove it again.
I'm trying to enable WI-FI but the system doesn't recognizes it
Code: 0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)
Subsystem: Dell Wireless 1397 WLAN Mini-Card
Kernel driver in use: b43-pci-bridge
Kernel modules: ssb
How to enable rhn?
View 1 Replies View RelatedI'm getting a USB error -71 and I found that disabling ehci_hcd allows my USB port to be usable. When the server boots up, ehci is automatically loaded and once that happens, the USB is rendered useless. Is there a command in Grub to downgrade the USB version?
Another option would be to make an .img to load up without USB 2.0 and using USB 1.0 but I don't know how to make one.
How do i enable rdp on my RH5 through ssh
View 1 Replies View RelatedI have installed ESX 4 on a Dell box but i am not able to ssh or telnet to the box after installation.find below for verison information
# vmware -v
VMware ESXi 4.0.0 build-164009
I am also not able to open the virtual console to create a virtual instance.
i'm trying to install php on my RHEL 5.1 from the "Remi repository" but there are some missed dependencies that i need to install it, i read that they are in the epel repositories so i tried to enable it, the instructions i read to do it says that i have to do this:[URL]yum repolistbut this is what i get:Quote:
Loading "installonlyn" plugin
Loading "security" plugin
Loading "rhnplugin" plugin
[code]....
I am new to debian when I want to install following happens . code...
Internet is working fine . What is problem . I cant install anything
Just installed 6.0.1 on my computer with a GA-H55N-USB3. It seems to have a Realtek ALC892 on it, and six 3.5mm jacks out and SPDIF too. I installed alsa and sound came from the 3.5mm jack, but I want SPDIF. I don't know what approach to make to enable it and that's the problem. SPDIF just have two modes in alsamixer, "00" or "MM" (muted). Master and PCM are set to 100. The SPDIF connecter is'nt even lit. How to enable it? I tried "alsactl init" and then rebooting, it made no difference.
[code]...
I upgraded my box this morning and I get to know something woring till now. I can't play video with the default video output xv in mplayer now. mplayer tells me that
[code]...
I naively think if I downgrade all xserver-* and mesa* to previous version, it will work again. But I failed.
[code]...
As I'm trying to set ACL via "chacl" command, its giving error saying "Operation not supported". So, the syntax part is correct but its not supported.
So, how to enable ACL support on Linux 4.
I installed Fedora 12 and everything seems to work fine except that I can't get sound from ....., pandora, or anything other than the weird system noises to work. I have ALSA and PulseAudio installed. Is there some simple procedure to enable sound in Fedora 12?
View 4 Replies View Relatedi'm using F13 64 bit on an hp pavilion dv7. i turned off my mousepad today with a hardware button that is located above it and after re-enabling it my mousepad won't work. i rebooted and it still won't work. how can i re-enable my mousepad
View 2 Replies View Relatedi'm using fedora 13 with php 5. how can i enable the dom extension. this is being asked for some web application like the bambooinvoicing.
View 2 Replies View Related