I upgraded my box this morning and I get to know something woring till now. I can't play video with the default video output xv in mplayer now. mplayer tells me that
[code]...
I naively think if I downgrade all xserver-* and mesa* to previous version, it will work again. But I failed.
[code]...
How I can enable DRI3 over debian strech/sid
View 0 Replies View RelatedI have a few computers running linux and windows and I like to be able to telnet and to ftp but these services are not active I look into system settings but I can not find anything on were to start them.I already try using ssh but it just hangs and nothing happened also I tried to use the graphical app for ftp but same result host not reachable.
View 10 Replies View RelatedRunning the nvidia driver 304.125 from the repos. Debian 8.
I am running 4 monitors without xinerama. I'm not using xinerama because there is a bug which prevents opengl acceleration from working on all four screens since one of the gpus is a bit older than the other.
The solution for this, I am told, is to use xrandr instead of xinerama.
I'm using arandr as a nice front end to xrandr. However, when I run arandr on each screen, the only output it shows as available is the current screen.
I also see:
Xlib: extension "RANDR" missing on display ":0.0"
etc.
How do I enable the RANDR extension so I can get arandr working and unify my four monitors into one?
I'm using Debian Lenny, the only problem that I have is that the sound card isn't recognize by the system, I have installed ALSA 1.0.20 and I followed several tutorials trying to enable my sound card (ATI tech Azalia (Intel HDA)but all tries fail.
So, after install another distro -debian based- in the same pc I figured out that the sound card is enable and running by default, the ALSA version is the same -1.0.20- but the kernel is different -2.6.31.xx- so my questions are:
1. do you recommend me to upgrade my lenny's kernel to fix the problem?
2. is there a way to upgrade specific packages -for example samba, alsa, kernel- using unstable or testing versions instead of upgrade the entire distro? actually I'm confortable with lenny
3. what configuration should I check in the "other" distro to use that parameters in lenny?
I have accidentally stoped gdm3 service with BootUP-Manager and now i cant enable it again. I can start it from terminal with sudo service gdm3 start i have tryed to dpkg-reconfigure gdm3 and purge/install. This are services running on startup [ + acpid
[ - ] anacron
[ + ] apache2
[ + ] atd
[code].....
I currently run openVPN on my Debian box that provides secure ipv4 routing from my laptop to my VPS in a different country (and from there the internet via this box). This works fine. However, id like to sort out ipv6 through this VPN as well as IPV4 and not overly sure how to do it. The remote server itself has native ipv6 configured on device eth0 and it works (ping6, traceroutes all fine,incoming to web servers etc) nicely on dual stack.
How would i go about modifying the config (both client and server if needed) to enable openVPN to act as a tunnel broker to enable the laptop to use the ipv6 through the server as well as the old v4? (the internet connection laptop end will not/does not have native ipv6 from the ISP. Currently im using he-net tunnel broker but id like to run myself through my existing openVPN). VPN config details: Its using UDP, port 1194, creates a TUN interface, redirect-gateway etc and the rest is normal config. Edit:- if it matters the clients are all running windows so i cant use sh scripts to set up stuff client end.
I installed new ati radeon drivers in the morning because i was getting display/screen deformation when using some programs (like vertical lines and so on). Now everything is just fine but i can't get 3d accelerator to work and due to this some games are running very slow. I am a new linux user. I have done everything i know and searched this from the internet but i can't get 3d acc. to work again. i have installed new drivers over the old ones (or i don't know; mesa?)
[code]...
I have some issues concerning so called "11-minutes-mode" - RTC update"11-minutes-mode" definition In hwclock man page we can read:"Automatic Hardware Clock Synchronization By the KernelYou should be aware of another way that the Hardware Clock is kept synchronized in some systems. The Linux kernel has a mode wherein it copies the System Time to the Hardware Clock every 11 minutes. This is a good mode to use when you are using something sophisticated like ntp to keep your System Time synchronized. (ntp is a way to keep your System Time synchronized either to a time server somewhere on the network or to a radio clock hooked up to your system. See RFC 1305).
This mode (we'll call it "11 minute mode") is off until something turns it on. The ntp daemon xntpd is one thing that turns it on. You can turn it off by running anything, including hwclock --hctosys, that sets the System Time the old fashioned way. To see if it is on or off, use the command adjtimex --print and look at the value of "status". If the "64" bit of this number (expressed in binary) equal to 0, 11 minute mode is on. Otherwise, it is off. If your system runs with 11 minute mode on, don't use hwclock --adjust or hwclock --hctosys. You'll just make a mess. It is acceptable to use a hwclock --hctosys at startup time to get a reasonable System Time until your system is able to set the System Time from the external source and start 11 minute mode. Here are my questions:1 . How to check if "11-minutes-mode" is on/off ?The output of adjtimex -p looks like this:
mode: 0
offset: 17504
frequency: 6140386
[code]...
I recently installed Deluge 1.2.0 from the following PPA:[URL]I using this on two different Linux computers. One is running Linux Mint 8 and the other is running Ubuntu Netbook Remix 9.10. The first time on either computer when I enable WebUI in the Deluge GUI it works fine. However if I ever disable it in plugins section I am subsequently unable to re-enable it (doesn't appear in the side panel again). Rebooting or reinstalling Deluge seems to have no effect.Is this a bug or am I doing something wrong?
View 3 Replies View Relatedwhenever i do anything as sudo i get GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See [URL].. for information. (Details - 1: Could not send message to GConf daemon: Connection is closed)
View 2 Replies View RelatedWhen installing Samba and Webmin I use the application "system-config-services" or (if it is easier to find for you that way) menu->Administration->Service management. In this application I can start the services I need (nmb, smb, webmin), but the enable/disable at startup setting is greyed out... Even when I start the application as root it still gives me no possibility to configure the services to start up on boot. This should be possible. It works this way in Fedora 13 and Fedora 14, so why not in Fedora 15?
Before reporting a bug, I would like to ask if other users here have the same problem (and -if possible- a solution)... In the mean tim I guess it is back to the old way of configurating services - sigh..
[edit] I tried to remove the [SOLVED] from the title, but the forum software does not seems to allow me to do that... I thought it was solved by installing xinetd, but I was happy a bit too early. I still have no answer for this problem.
I have a server that I can only access via SSH (it's located far away) and I would like to secure it by blocking all ports except the ones that I need (which are HTTP and SSH). I still want to be able to make outgoing connections to enable software updates and other things.This is my iptables -L -n :
Code:
Chain INPUT (policy ACCEPT)
target prot opt source destination
ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED
DROP tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpts:1:21
DROP tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpts:23:79
DROP tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpts:81:65535
code....
In my opinion, this should block all incoming packets except the ones on port 80 and 22, but allow responses to outgoing connections. But a wget http://google.com does not work, it can't establish the connection.
Maybe this is not the best style for iptables rules, but I want to be absolutely sure to not accidently lock myself out from SSH, so I chose not to configure a "block-everything rule".
Does this configuration not enable incoming packets from connections initiated from inside?
I am having no luck configuring ProFTPd on a Debian Lenny production server we use to host our MySQL databases and a few websites. I had originally set it up so I could login and manage our internal sites, but I have the need to allow a few clients in to access their sites that we host. I am trying to root the users in their site directory, which would be "/sites/www.whatever.com/".
It just hit me while typing this. Is it possible to create a user without a shell to prevent login via SSH and set the home folder to /sites/whatever instead of /home/username? That would allow me to continue operating with my current configuration and root them in their site while preventing SSH logins.
i have a HP MSA 2312fc SAN with 2 LUNs configured. The first LUN (LUN ID 1) is correctly connected to the system, but when i connect the second LUN (LUN ID 30), i find in the syslog this message: multipathd: 8:64: size 6835937472, expected 5267578112. Discard
Here is the multipath.conf
[Code]....
So I correctly see the two luns, but multipath doesn't create the relative devices. Under /dev/mapper I see: control mpath0 mpath0-part1 mpath0-part1 is the first lun, the one I mounted in a directory under filesystem. I can't find the device for the second lun
I am *finally* getting around to rebuilding my file-sharing computer. I'll be sharing files with both Linux and Windoze machines. It's a home network, so there's nothing fancy needed. I know I have to tweak my smb.conf file until I'm satisfied with the features and security. I'm using SWAT and I'm starting with a bare-bones conf file. It's not secure but I can see the server and selected files/directories from my other Linux box.
My really dumb question is, do I have to reboot both the server and the client machines every time I change the SAMBA configuration? I thought I just had to stop and restart the SAMBA service in the SWAT software - but then the server disappears from my client. It looks like I need to reboot both machines for the client to see the server.
I have some errors when run the mount -all command: mount: wrong fs type, bad option, bad superblock on /dev/sdc5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Failed to open /proc/filesystems: No such file or directory
[Code]..
I have a PC104 running debian. I have 3 hard drives (in addition to the one booting) mounted in fstab by UUID. I use the options defaults,error=remount-ro. However, this means that when I boot with the hard drives not attached, I have to press Ctrl-D to bypass when the boot discovers the drives are missing. Is there a timeout commandoption I can add to fstab so that it automatically continues booting even if the hard drives are not attached? I could not find anything on a timeout command. (I tried adding timeout=1000 but no-random guess)
View 5 Replies View RelatedA week ago I opened this thread viewtopic.php?f=17&t=61580 in "Board index ‹ Help ‹ Installation" and asked for a moderator to move this to here. Because it hasnt happened up to know, I am reopening the thread here. It would be reeeeally great if somebody could help me with my problem!
I own two computers, one netbook and one laptop. I want to boot my netbook as a diskless client via PXE.I set up a dhcp-, tftp and nfs-server on my laptop but when i boot my netbook, the follwoing messages are displayed:(to make it more clear, i uploaded the whole output and shortened the output below)
[Code]...
I am using Squessze and Gnome. When I try to use the gui System>Administration>Network or Users and Groups I get the error The configuration could not be loaded. You are not allowed to access the system configuration.Everything was working before. I read around a bit. In some cases,it was caused by mismatching group and password files after using the gui. I do not know how to check if they are matching. Of course I do not know for sure that is the problem in my case.
View 14 Replies View RelatedI use apache2 with virtual host and I 've a solution of Webftp who run on it. This solution send automatically email when a new client register himself. In the header of the mail I look this "Content-type: text/html". But when I look this mail with Outlook 2007 the accents are bad coding.It's a script who generate this Html content email.
View 1 Replies View RelatedI am working on a Debian 2.6.26-19 Distribution with exim4 as MTA. After a system restart a problem occurred with delivering emails to local addresses. These local addresses use a 1and1 mailserver for email. The MX records for the local domain are set correctly but exim does not use a DNS lookup for these addresses because it identifies them as local addresses. I figured this out by executing the exim4 -d -bt command. The dns lookup part of the result looks like this (I replaced the actual address with placeholders):
[Code]....
The eventual result of the exim4 -d -bt command is: [user]@[domain.ext] is undeliverable: Unrouteable address How can I make sure, that exim4 makes a DNS lookup for the local addresses instead of skipping it? I know that I have to edit a exim4 configuration file, but I could not figure out which and how.
I have a set of vm's with stable, testing, and sid to keep track of how things are going. When I did an apt-get dist-upgrade with squeeze last week, things seemed to OK (350 package updates) until the end. It didn't seem to like and / or was confused by a kernel dependency.
I am not too concerned yet. Because these are in vm's, I do a snapshot before any significant change. I can futz around with impunity because I have that backup.
I re-booted, and tried the apt-get dist-upgrade again with same results. I think I also tried apt-get -f install.
So I reverted to the snapshot, and will simply try again in the future. I recall that with lenny as testing, the font-desktop was really screwed up for about a period of 6 weeks.
However, just in case someone else runs into this:
1) a re-boot worked, but the failure of apt-get made me nervous enough to revert.
2) waiting for corrections has seemed to work in the past (with a single exception with a 4-disk SCSI software RAID10 update that failed to re-boot lenny successfully after what seemed to be a minor update -- that was on a real system, not a vm. I haven't gotten back to look at that.)
I was trying to get the Windows one working again. Here's what fdisk -l reads:
[Code]...
I'll change these or do some grub configurations, if anyone knows what ones can work.
I have problems with the system harddrive. I would like to install my Debian on to a new HDD with the same configuration and packages. How do I get the configuration to the new Debian. What files/directory do I need to copy? How do install the same packages?
View 4 Replies View RelatedTo configure SMS gateway using Kannel configuration for Huwei GSM Modem
dmesg gives attached modem in my system:
I have a problem with the configuration of the NS zone. Looked through the logs, and there:
Apr 28 21:20:19 szewczyk named[18340]: /etc/bind/db.domain.pl:1: no current owner name
Apr 28 21:20:19 szewczyk named[18340]: zone domain.pl/IN: loading from master file /etc/bind/db.domena.pl failed: no owner
[code]....
I should be able to access xfinitywifi hotspots. /etc/network/interfaces and /etc/wpa_supplicant.conf. I don't want to use NetworkManager for this connection.> iw dev wlan0 scan
BSS 60:02:92:e6:78:0a(on wlan0)
TSF: 1619575398784 usec (18d, 17:52:55)
freq: 2437
beacon interval: 100 TUs
capability: ESS ShortPreamble ShortSlotTime (0x0421)
signal: -65.00 dBm
[code]...
I have a web server running and wish to get a mail server running on the same machine. I have a registered domain name. I have postfix and dovecot installed. I can send emails from the server to my normal address on a different domain but cannot receive mail. I can send and receive mail locally with no problems. I just don't know where to look for the problems. If you need any more info ( config files/doamin names etc let me know)
View 5 Replies View RelatedI recently just installed Squeeze on an ia64 system and was having some troubles with running VNC.I get the following error, more specifically for some reason I get a malloc - memory corruption error:
Xtightvnc(9165): unaligned access to 0x60000000001ea06c, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea074, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea07c, ip=0x4000000000268280
Xtightvnc(9165): unaligned access to 0x60000000001ea084, ip=0x4000000000268280
[code]...
After display all the code above, it just stops. The port 5901 is still closed - if it runs properly, would it open automatically?Is there something that is incompatible? Or am I missing some system configuration component?