Software :: Dual Monitor Xorg Configuration With Different Resolutions?
Oct 29, 2010
I am not sure if this is the correct forum to post this topic (I was struggling between hardware and software). But since I do not think this was a problem with my hardware(monitor), I decided to post it here.
I have been tasked to set up 2 monitors on SUSE Linux Enterprise that are a clone of each other, but each displaying different resolutions. The primary display has a max resolution of 1024x768 while the secondary display has a max resolution of 800x600.
The problem comes when the secondary display shows a "cropped" version of the desktop. Is there anyway to show different resolutions on each display while maintaining the proper desktop look? I have attached the relevant portion of my xorg.conf.
[Code]...
View 6 Replies
ADVERTISEMENT
Oct 31, 2010
I have been tasked to set up 2 monitors on SUSE Linux Enterprise that are a clone of each other, but each displaying different resolutions. The primary display has a max resolution of 1024x768 while the secondary display has a max resolution of 800x600.
The problem comes when the secondary display shows a "cropped" version of the desktop. Is there anyway to show different resolutions on each display while maintaining the proper desktop look?
[Code]...
View 4 Replies
View Related
Apr 20, 2011
Today I bought a new monitor (IPS236V) to use it to watch movies and tv while I'm working on the other one.. I thought it's the best to activate Xinerama which could be done easy via CCC. But I'm not able to change the resolutions now as these panels are disabled in CCC. The first monitor is set to its native resolution, but the second is something lower.How can I configure both monitors to there native resolution?
View 5 Replies
View Related
Oct 19, 2009
This is a repost of my initial problem, I need some one who knows what they are doing more than I too take a look at this command output and give some sort of direction/clue/etc on what I'm doing wrong or missing.
Is my xorg.conf missing some vital line(s) or setting?
My best guess is that i'm missing something to tell the Xserver to use both screens, as the Xorg.0.log does not talk about trying to bring up the intel display; but this is just a hunch.
I'm running kubuntu 9.04 with 2 monitors: on-board intel video and a PCI nvidia display: I am using my nvidia display fine, but still can not get my 2nd display (the intel) working. What the heck am I missing?
lspci:
Code:
Code:
View 3 Replies
View Related
Jul 1, 2009
I have a dual monitor setup (Twinview), both monitors are connected to my 1xNvidia MSI NX8600GT card...I've been using a 21.6inch HannsG HG216D (herein referred to as HG216D) monitor as my LEFT monitor, and a Dell 1905fp (herein referred to as 1905fp) as my RIGHT monitor.
I recently got rid of the 19inch 1905fp Dell monitor and moved my HG216D to the RIGHT and now I have a new 23inch DELL S2309W (herein referred to as S2309W) on the left. The new S2309W is connected to my computer via DVI cable and is configured Perfectly at it's native 1920x1080 resolution.
However I can't for the life of me get my HG216D back to it's native 1680x1050. The HG216D is connected via VGA cable that is also routed thru a KVM, I realize this means that this monitor can't/won't be auto-configured. However I should be allowed to set it manually right?...
Code:
Won't let me select 1680x1050 for the HG216D resolution, it will only let me select 1440x900 MAX, there is no option for 1680x1050, (See attached: screenshot)
I've tried to manually edit my /etc/X11/xorg.conf, but after hours on end messing with it, I give UP...
Here is my current xorg.conf:
Code:
I am just not sure what I need to change and how to get the second xorg.conf to play nice via a VGA connection?
View 1 Replies
View Related
Oct 15, 2010
A few days ago I installed browserlinux onto my AspireOne netbook whilst connected to a 15" external monitor of 1024x768 at 60Hz. During installation I ran the Puppy Xorg Wizard with the netbook's monitor (1024x600) switched off. It selected the optimum resolution of my external monitor correctly as 1024x768 and the 'intel' driver for the Intel 945 Express chipset. However when I ran programs and maximised their windows they would cut off about a third from the bottom. I ran the Xorg Resolution Wizard which showed a resolution of 1024x600 despite xorg.conf only showing an option of 1024x768. I tried to copy a xorg.conf from Linpus (Fedora 8) which had required some altering in the past to run the external monitor at the correct resolution but X failed to start (possibly because Xorg in browserlinux is a newer release). Would it be possible for someone to upload a xorg.conf file which would enable display the external monitor at the correct resolution (and ideally allow switching between the two monitors - under Linpus the hotkey is Fn + 4) or suggest alterations to the current file?
[Code]...
View 7 Replies
View Related
Jun 19, 2011
my laptop screen has 1900x1280 (native resolution) and my second monitor has 1600x1080
After browsing the forums and messing around with drivers I managed to get the resolution up to 1600x1080 (from 1000x800 at install) on the laptop screen. No luck at all with the second monitor. I currently have it connected with both VGA and DVI.
my understanding is I need to use twin view to setup the second monitor. I've read several of the earlier posts but haven't been able to get it to work. Here is my current xorg.conf file:
Code:
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Configured Monitor"
VendorName "Unknown"
[Code].....
View 9 Replies
View Related
Mar 6, 2011
On my Debian 6.0 squeeze system, after reconfiguring GRUB and installing QEMU, X is sticking in 800x600 and not 1024x768. Yesterday I had no problems. Using a Rage Pro AGP 2X with 8 MB RAM (mach64 driver) on a i686 system. The kernel is the latest from squeeze's repo (2.6.32-5) and booted with the same settings as before despite the GRUB change to purge old 2.6 kernels.
View 1 Replies
View Related
Aug 18, 2010
I have two identical machines. I updated one (yum update), and now I can't view the display when it boots up; however, I can ssh into it. I'm pretty sure it's a resolution display issue on a KVM connected to the machines.
Years ago, I could view and change the default resolution in /etc/X11/xorg.conf. Now, it appears that information has been moved to another location.
My xorg.conf on the working and non-working machines is the same:
Code:
Nothing is mentioned about a resolution setting. Everything I google says to modify this file. Does anyone know where the default resolution settings are stored these days?
View 5 Replies
View Related
Aug 10, 2011
One monitor is working fine but the display is not coming on other monitor. I guess no problem in monitor because I swapped the cable to check the individual monitor. When I try to install the new driver its giving GCC-VERSION-CHECK while installing. And I do not think I have to install the new driver because it has already one. What should I do to configure the dual monitor. Do I have to edit any configuration file.
My system configuration details are below.
Redhat version : Redhat Enterprise Linux WS release 3 (Taroon update 4)
Driver in SRBC 26: NVIDIA-LINUX-x86_64-1.0-7664-pkg2.run
Nvidia card model : Quadro fx p171
Bios version of Nvidia : 4.35.20.23.07
p/n : 900-50171-0400-0000K
600-50171-0002-201J
View 3 Replies
View Related
Jun 11, 2011
I disabled KMS and checked for direct rendering with the glxinfo command. glxinfo, reported that direct rendering is enabled. This is good news, because it means that the i915 driver is being used.
[Code]....
Now, I need to write a custom xorg.conf file to force X to use the native resolutions of my chip.
View 1 Replies
View Related
Feb 11, 2010
I'm having a rather hard time getting my 3 monitors setup as one display. I can get all three to work without too much heartburn using 3 separate X instances. The monitors are on 2 different video cards, one dual heads. The other on it's own card.
I've tried countless ways to get this to work, and I'm just not feeling the love. There are 2 17 inch monitors on the 1 video card and then the second video card has a 24 inch monitor on it. I can get the two monitors on one head to work with twinview, but the third one is left out.
The physical configuration looks like this..
17inch on the left of the 24 inch monitor, and another 17 inch monitor on the right, with the 24 inch monitor being in the center.
I'm going to include my current xorg.conf and lspci.
xorg.conf
Code:
harry@ubuntu:~$ cat /etc/X11/x
xinit/ xkb/ xorg.conf xorg.conf.backup
harry@ubuntu:~$ cat /etc/X11/xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@palmer) Sun Feb 1 20:21:04 UTC 2009
[Code].....
View 3 Replies
View Related
Mar 9, 2010
I am trying to set up dual monitors for lenny but nosuccess for the moment.
They were working fine for the same setup on ubuntu.
Using xrandr I get:
I read that virtual screen size could be the maximum part which is of no use in comparison to the current size.
So setting a virtual part in my xorg does not help much. If the above is right.
I have:
How to get the external monitor work in the extened screen mode.
View 2 Replies
View Related
Mar 4, 2011
I run opensuse 11.3/kde desktop.
- updated to KDE:Factory
- X11 repository (V1.9.3)
- proprietary nvidia drivers (260.19.36)
Video card is a Quadro NVS 290. A dual head configuration using twinview is run.
The desktop becomes slow almost immediately (couple of seconds) after logging in (all applications). Turning off desktop effects does not make a difference as well as trying the various recipes on the internet regarding x.org conf-files.
The only action restoring responsiveness is to simply start nvidia-settings. Putting the following pseudo-action into a script-file and mapping it to a key allows to have a workable environment:
nvidia-settings -a PixmapCache=0 && nvidia-settings -a PixmapCache=1
It is very annoying having to press a key every minute or so. Instead of creating a cronjob I would like to solve this issue. This behavior has been consistent across kde/x-org/nvidia/kernel updates for many month now.
View 6 Replies
View Related
Feb 19, 2010
I'm using dual-screen output with KDE 4.4 on my laptop. Is it possible to have the KDE panel on the external monitor if attached and back on the laptop's LCD panel as soon as the monitor is disconnected?
It seems that Plasma prefers the built-in LCD even if an external monitor is connected. I tried various settings with xrandr and also in the System Settings but none of them helped. The only way to move the KDE panel to the external screen is to disable the built-in LCD.
What I would basically like to do is to use the external monitor as primary in the office and the laptop LCD next to it as a second screen. When I'm traveling I'd like to use only the laptop LCD.
Is there also a nice way to switch between the screens? On the Internet I found a script for the "screen switch" key for IBM Thinkpad and modified it to work on my Dell. But it would be nice to have this also automatic: autodetect the monitor attachment/removal and perform a configured action. The KRandr doesn't seem to have such a feature. Is there anything I could use?
My system is: Kubuntu 9.10 with KDE 4.4 upgrade. Hardware: Dell Inspiron 1545 with Intel GM45 card.
View 3 Replies
View Related
Mar 23, 2011
I just installed Kubuntu 10.04. My monitor support up to 1680x1050 resolution but Kubuntu allows me to only choose up to 1360x768. How can I fix this?
View 1 Replies
View Related
May 13, 2010
I have two monitors of different resolutions. Under settings->display the settings for my monitor look like this: [URL]. Ultimately what I want is to set up this kind of configuration: [URL]. But whenever I do, it doesn't work out. When I up after setting the above settings, my configuration ends up like this: [URL]. Any attempt to change the resolution or to change the display type to anything other then clone is simply ignored. If I disable the second monitor I can set my first to the proper resolution. If I try to set the settings to what I want they will stick but the second monitor doesn't actually turn on, and if i try to drag windows that direction it acts like a single display.
I have tried using the ATI control panel to adjust my display, but there seems to be a problem entering it as an administrator.I can load the CCC just fine as a regular user, but when I try as an admin a terminal pops up, I type in my password, and nothing happens. I want to avoid trying to reinstall my display drivers or do anything drastic. In previous versions of linux I would just nano the Xorg.conf file and be done with it, but it seems ubuntu 10.04 LTS doesn't use Xorg, or at least not a Xorg.conf I am used to. I want to set the monitors at their native res and as independent displays, similar to what twin view did for me not to long ago.
View 2 Replies
View Related
Aug 7, 2009
I am somewhat new to CentOS, but I have read a lot of web pages and tried a good number of things trying to solve my own problem. I have made it worse a few times, but never better. I have an envision 1440x900 LCD monitor and a S3 Savage video chip on the motherboard. In System->Administration->Display->Hardware I am using generic LCD Panel 1440x900 and the video card is listed as "S3 Inc. VT8375 [ProSavage KM266/KL266]. I believe both of these to be correct. I have added the mode to my xorg.conf
The problem is, under System->Preferences->Screen Resolution, the mode 1440x900 does not appear. The highest resolution is 1280x768. Does the S3 Savage just not have the ability to produce 1440x900?
[Code]...
View 7 Replies
View Related
Jul 8, 2011
I recently got a new external monitor for my laptop, and connected them by VGA. This is what 'xrandr' tells me:
Screen 0: minimum 320 x 200, current 1440 x 900, maximum 4096 x 4096
LVDS1 connected (normal left inverted right x axis y axis)
1280x800 60.0 +
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
VGA1 connected 1440x900+0+0 (normal left inverted right x axis y axis) 510mm x 290mm
1920x1080 60.0 +
1600x1200 60.0
1680x1050 60.0
1280x1024 75.0 60.0
1440x900 75.0 59.9*
1280x960 60.0
1280x800 59.8
1152x864 75.0
1024x768 75.1 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 72.8 75.0 66.7 60.0
720x400 70.1
However when I try to change to some of the higher resolutions, such as 1920x1080, all I get is a corrupted and flickering image. As indicated above, I am currently on 1440x900@59.9h,z but for some reason 1440x900@75hz doesn't work. The same seems to be true for 1280x1024. The three resolutions above that all cannot be selected properly. I tried setting the resolution to maximum in Windows XP and it worked, and my video games console can set it to 1080p, so I don't think there is anything wrong with the monitor. Is there anything I can do or is this some kind of bug or limitation of the graphics driver or something? The graphics chipset of the laptop is an Intel 945GM, which I believe should be capable of displaying 1920x1080. I am running debian unstable with what seems to be the most up to date version of xserver-xorg-video-intel.
View 2 Replies
View Related
Jan 24, 2011
first time poster after having read gobs of threads trying to find the answer to my issue here. I'll try to post as much information as I can, and then will supply whatever else is inevitably left out and deemed necessary. I'm running 10.10 on a Gateway MX3701 laptop which has an ATI Radeon Xpress 200M graphics controller (lspci | grep VGA) and am hooking it up to my Samsung P2770HD monitor/TV via VGA (VGA-0 port if that's important).
So, the issue: In resurrecting my old laptop by killing XP and putting on Ubuntu, I found I needed a VGA cable to connect to my monitor. Borrowed a friend's to get my setup going, and all was well in 1920x1080 with all the other monitor settings working well too (laptop monitor off, etc.. When my new VGA cable (cheap from Amazon) arrived and I shutdown, made new connection, and rebooted, my monitor was no longer recognized (it was before) and I am limited to weak sauce resolutions meant for my blinding grandmother.
So I've tried to find similar issues on here and have struggled to do so. I did find one thread that was similar, but the issue was never resolved.
View 2 Replies
View Related
Jul 17, 2011
I just installed Natty (11.04) on an old computer for my disabled brother with:
* Video Card:
00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 01)
* Monitor:
VGA Mitsubishi Diamond Pro 750SB (old CRT monitor)
The problem is that when I select System -> Preferences -> Monitors, the monitor is shown as unknown and it only allows me to set 1280x1024 (shows 0Hz as display refresh rate) which is way too high for my brother. I was wondering if there's a way to select the proper monitor from a list so all display resolutions are shown and I can select a lower one for him.
View 8 Replies
View Related
Apr 3, 2010
I installed Karmic on an older PC I had laying around, and the only trouble I am having is with screen resolution. It uses an old ATI chipset (onboard) for video, and it doesn't seem to do EDID correctly, so I can't display anything higher than 800x600. I have tried creating an xorg.conf, but it's still not working. How can I tell Xorg to ignore the fact it can't detect a widescreen monitor and display something larger than 800x600? I noticed the log says the sync's are out of range, but I am not sure how to fix it.
Here is my current xorg.conf.
Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
[Code]....
View 1 Replies
View Related
May 4, 2011
I have been trying to configure dual monitors of different resolutions on 11.4 the Nvidia configuration utility does not know where or what to save anything anymore and goes wonky. Trying to use it is a dead end for me. X11 is a mess. What happened to SAX and things like this that were part of openSUSE and just worked? Supposedly we X11 got better. I think it's got over complicated and much worse. This stuff just worked in 11.1 and KDE 3.
View 9 Replies
View Related
Aug 10, 2010
I just installed 11.3 in one of my computers and I've noticed the resolution was sometimes changing after a reboot. First it was switching from 1280x1025 to 1024x768 with the default deivers, then I thought installing Nvidia propietary drivers would solve the problem, but now is switching between 1280x1024 and 640x480. After several attemps to fix it I found out that the system uses the correct resolution if it starts with the monitor switched on, but falls back to 640x480 if it's off when the system boots, which is almost always since I usually control this pc trough vnc.
I Tryed to specify the available resolutions in xorg.conf, and adding the preferred mode option, but it didn't help. I tryed also to use xrand in .profile to force 1280 resolution, but it doesn't work either (when the system is started with monitor off, xrand only shows 640x480 and 320x240 as available resolutions, and so does the system preferences panel).
Here's the xorg.conf I'm using right now:
Code:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 256.35 (buildmeister@builder101) Wed Jun 16 19:25:59 PDT 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
code...
View 7 Replies
View Related
Jan 15, 2011
just setup suse 11.3 , put on the Nvidia 19.29-22.1 drivers via yast , no kms is set in inetd , nomodeset on grub boot line etc... Even tried installing the driver " the hard way " dual monitors come up, setup xinerama to "Extend" my desktop , and the main monitor ( right side ) is good, visually the left monitor (2ndary) is good.. but whenever I move my mouse over to the left screen the mouse pointer dissapears, flickers along the right hand border of that screen... and if i move the cursor back to the original screen i have to really fight to get it back to the main screen....Copy of my xorg.conf , still very basic...
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 260.19.29 (buildmeister@swio-display-x86-rhel47-04.
nvidia.com) Wed Dec 8 12:27:27 PST 2010
[code].....
View 9 Replies
View Related
Jan 27, 2011
I just upgrade to F14 from F10 on a dual montor setup. Firefox behaives differently on F14 than on F10.
On F10 it followed the mouse pointer's location and show up on the correct monitor
When maximized at close, it is always displayed on the left monitor. When not maximized at close it will open on the monitor where the mouse pointer is located.
About minimize/maximize Firefoxe before closing and it seems to work in some case, but not for me.
View 5 Replies
View Related
Nov 19, 2010
I have a dual monitor setup in Ubuntu, with my main monitor on the right and the monitor I want to extend to on the left monitor, but I can't seem to get it to do this, it always has the 'desktop' on the left monitor and then extends onto what I want to be my main monitor. I have an ATI Radeon 4350 Graphics card.
View 1 Replies
View Related
Dec 10, 2010
Is there any way to put a dual monitor wallpaper on a single monitor configuration using desktop wall? Using only 1/3 or so per wall. Something that will have the effect like the scrolling wallpaper feature on Android/iPhone.
View 2 Replies
View Related
Jun 9, 2011
I bought a very beaultiful pink tv-monitor 26", model LG26LED6500 for my daughter and I also intend to enjoy it setting up in my slackware 13.37. Then I use a VGA cable and 6600GT nvidia card, but now I'm having a doubt because there aren't vertical and horizontal frequencies specs in this manual. Only:
I did a xorg.conf using a vesa driver and kde screen output was a 1024x768 - 61hz.
If I try to use a nvidia driver and xorg.conf piece above X break down. If I use any manual frequency parameters X break down too.
1)What's the difference between CRT config and tv-monitor xorg?
2)Have I use strings modeline monitor and modes screen in this situation?
View 3 Replies
View Related
Apr 23, 2011
I am attempting to use dual monitors in Fedora 14 using an AMD ATI Radeon HD 5700 Series graphics card (not that I think that has anything to do with anything, but who knows), and want it to where my second monitor is its own virtual workspace so that I can switch between my other workspaces on my original monitor without switching the workspace on the second monitor. This way, I can watch movies or what-not on my TV (2nd monitor) while working on my original monitor.The only thing I found that was even close was setting the 2nd monitor up on it's on x server, which I don't want to do. Also, as it is now, I have my panel on my original monitor, but the windows do not see it when I have it aligned on the right (the windows don't adjust their size to account for the fact that it is there). I know a way I can do a work-around for this, but I would like to know if there is a "correct" way to do this. I know I can tell the movie player to show on all workspaces and have it on the 2nd monitor.
View 1 Replies
View Related
