Fedora :: Dual Monitor / Dual Workspace?
Apr 23, 2011
I am attempting to use dual monitors in Fedora 14 using an AMD ATI Radeon HD 5700 Series graphics card (not that I think that has anything to do with anything, but who knows), and want it to where my second monitor is its own virtual workspace so that I can switch between my other workspaces on my original monitor without switching the workspace on the second monitor. This way, I can watch movies or what-not on my TV (2nd monitor) while working on my original monitor.The only thing I found that was even close was setting the 2nd monitor up on it's on x server, which I don't want to do. Also, as it is now, I have my panel on my original monitor, but the windows do not see it when I have it aligned on the right (the windows don't adjust their size to account for the fact that it is there). I know a way I can do a work-around for this, but I would like to know if there is a "correct" way to do this. I know I can tell the movie player to show on all workspaces and have it on the 2nd monitor.
View 1 Replies
ADVERTISEMENT
Feb 18, 2016
I have been encounter 2 bugs on 2 sides of the coin. Seems it doesn't fix since Wheezy till now.
1. When I don't install any nonfree firmware I'm stuck at 1024x768 resoultions unable to turn to 1366x768
2. But when I install nonfree firmware my 1366x768 was solved but I encounter other new bugs
>> On Jessie: XFCE4.10 doesn't save any wallpaper everytime when reboot the pc & always reset to default.
But when remove nonfree firmware the bg save normally but I've to stuck at 1024x768 resulotion.
This also happen on Wheezy as well.
>> On Stretch: XFCE4.12 workspace become too long ugly.
But when remove nonfree firmware the workspace become normal
but I've to stuck at 1024x768 resulotion once again.
So any way with nonfree installed without this XFCE bugs or without nonfree driver install but make resolution 1366x768 work for not to stuck in 1024x768 resolutions. Overall I'm quite satisfy Stretch testing than Jessie Stable.
View 14 Replies
View Related
Jun 1, 2011
I'm getting used to gnome3 one thing still bugs me- why when I switch workspaces on my multiple monitor machine does only the primary monitor change to a different workspace? The secondary monitor (my laptop screen) shows all open windows I put on it plus it's not even shown in the workspace list.
View 2 Replies
View Related
Jan 27, 2011
I just upgrade to F14 from F10 on a dual montor setup. Firefox behaives differently on F14 than on F10.
On F10 it followed the mouse pointer's location and show up on the correct monitor
When maximized at close, it is always displayed on the left monitor. When not maximized at close it will open on the monitor where the mouse pointer is located.
About minimize/maximize Firefoxe before closing and it seems to work in some case, but not for me.
View 5 Replies
View Related
Nov 19, 2009
Long time reader, first time poster to the forums. I have installed Fedora 12 onto a desktop here. Fresh install and fully updated as of today. In this system there is a radeon 7000 graphics card that Fedora set up dual display for me. This is working fine but unfortunately im seeing a problem with the top and bottom of one of the displays.
Please see the problem here: [URL]... The mouse will go underneath or above the areas i have pointed to. Any ideas what is wrong? In fedora 9, 10, 11 this was all working fine but i did have to use xrandr manually to get dual display working. Edit: Update:
I dd not mention that i kept my home directory. On futher inspection it seems that the issue is because of a .folder in my home directory that was backed up and restored on the fresh install. To check this i added a new user to the system and logged in with a fresh home directory. Does anyone know which folder or file this setting this is stored? I tried logging out, moving .gconf .gconfd .gnome2 .gnome2_private and the .gtk folders to another location then logged in to no avail.
View 1 Replies
View Related
Dec 15, 2010
1) I got a dual screen and I can drag applications on screen No2. But if I log out, reboot or close the application, it will go back to screen No1. Is it possible to memorize the position of an application on Screen No2?
2) I use workspace a lot. I like to split them by function. I got "Development": Netbeans, firefox (one on each screen), "communication": Evolution, gwibber, empathy (Evolution on 1 and the rest on 2) and "Entertainment" (anything not involving work)Every morning, I have to move my applications to the diferent workspace. It would be great if on startup they just go where I told them to be!
View 1 Replies
View Related
Jun 28, 2010
I know there are a lot of dual monitor threads.I've read them, and I even checked at the nvidia forum.I don't see something similar enough to my problem so I'm thinking maybe it's not a driver issue.I'm running F12, both monitors were working and I configured them properly and they were fine.Yesterday I installed the nvidia drivers as per Leigh's tutorial.Once I got that sorted out and rebooted, my secondary monitor was no longer registering.I checked in display settings and it does not recognize the second monitor.I tried going to system->administration->display but after I authenticate nothing happens.
View 3 Replies
View Related
Jul 4, 2011
I am using lenovo laptop and I have docking system, to extend another monitor on my desk for display.
Laptop 15.6 inch: 1600-900(16:9)
Acer 21 inch : 1920x1080 (16:9)
How to setup in fedora, so I can have both monitor display same screen, with respect of their resolution? When I click "MIrror displays" the resolution gets messed up. I want to use my monitor for the main use and close the lid of the laptop.
View 2 Replies
View Related
Dec 27, 2010
I am running Fedora 13 on a PC I built myself - MSI motherboard 785-E53. It has onboard DVI which my primary monitor is hooked to. I added an older 17" CRT to the onboard analog output and the main desktop with my icons and panels immediately switched to the CRT. Kernel is 2.6.34.7-66.fc13.i686, lspci -v says VGA compatible controller ATI Technologies Inc RS880 (Radeon HD 4200). How can I get flatscreen on the DVI output to be the primary?
View 10 Replies
View Related
Jul 4, 2010
I have just upgraded from Fedora 11 to Fedora 13 and now can't get my two monitors working as a single "screen" (it worked under F11). I have a GeForce video card with two monitor outputs
lspci -v
01:05.0 VGA compatible controller: nVidia Corporation G73 [GeForce 7600 GT] (rev a2) (prog-if 00 [VGA controller])
Subsystem: Device 1acc:0846
Flags: 66MHz, medium devsel, IRQ 16
[code]...
I then edit the xorg.conf to change the driver from nouveau to nv and I can start X and the LCD displays the desktop at a resolution of 1680x1050 (good) but the CRT just displays random blocks of colour. At this point I also get a kernel crash - see dmesg output attached, but the system is then OK to use. I have tried editing the xorg.conf to add a second monitor and a virtual screen resolution to match the two monitors (1024x768 + 1680x1050) combined (2704x1050) but still only the LCD monitor works, but with the virtual desktop that can be nudged around with the mouse. I would like to get back to using both monitors with a virtual screen across the two monitors.
View 3 Replies
View Related
Sep 11, 2010
I run a dual-screen setup, and the installation detected both screens without troubleowever I want to change primary screen, so the panels and menus will be located in the biggest monitor.I am not able to do this in the System -> Preferences -> Monitors interface. Where can I do this simple operation
View 2 Replies
View Related
Mar 18, 2011
I was using dual monitor on my Fedora 14. I followed leigh123linux's instruction and I was successful. However I cannot use the dual monitor any more - just see the cloned two monitors... I suspect something happened during update. ATI catalyst control center says I need to run it as superuser, but I do not know how to.
View 4 Replies
View Related
May 25, 2011
I have recently installed FC15 on my system. Dual monitor support seems to be broken with my setup. I am using the latest NVIDIA binary blob driver (270.41.19). I compiled my own kernel for it, version 2.6.39.
When gnome3 starts it almost manages to boot up, but then it crashes and gives me the option of logging out. I have my system booting into target 'multi-user.target' since I was doing some other stuff and I use `startx' to start gnome3. I tried running having X use xinerama and not use xinerama, both cause gnome3 to crash, albeit in different ways. Other than that I am running a stock install as far as I know.
If there are some logs I should be looking at for gnome3.
View 4 Replies
View Related
Feb 11, 2010
I just rebuilt my fedora box and I'm having some problems getting dual monitors to work. First, I can't reposition my secondary monitor to be on the left. It thinks it's on the right. I can use xrandr to fix this, but that is annoying. Is there no way to do this in the display properties? Second, maximizing a window makes it go across all screens. I unchecked this option in the display properties.I also unchecked the one for letting windows be in multiple monitors at once, but this still happens.
View 4 Replies
View Related
Nov 26, 2009
I used preupgrade to upgrade from F11 to F12. In F11, I used the proprietary nVidia drivers from rpmfusion, and they worked well. I have refrained from installing the nVidia drivers in F12, because of the problems reported for users of KDE. I removed my old xorg.conf, which has references to the nVidia driver and to "TwinView," the proprietary method of managing two screens, so as to let X discover both monitors.
Now, however, my second monitor stays black, even though xrandr and KDE RandR show both monitors correctly. Xorg.0.log shows the nouveau driver is loaded. (I also tried to create a new xorg.conf following guidelines from the web, but many of the guidelines are from before xrandr, and I'm not confident I have it right yet.) It seems that X believes I have two monitors, because I can drag a window off into the blackness (and it's never heard from again!) I know that the hardware is working, because I just booted into Windows 7, and I could see the desktop on both windows.
How do I convince X and KDE to display on both monitors?
View 2 Replies
View Related
Jun 18, 2010
I've been troubleshooting a friends computer and we've pretty well hit a brick wall. The issue at hand is the video card will not output properly. To be specific, it's an NVidia card with both DVI and VGA ports. We want it to output via the VGA and ignore the DVI because there's nothing plugged in there (the monitor we want to use doesn't support DVI). At any rate, the only time we can get the VGA to work is when we have another monitor plugged into the DVI port and dual head the system. When we do this it also adds an extra "Unknown Monitor" to the display panel. When we just use the DVI the extra "monitor" disappears. now we don't want to have monitor sitting here useless just so we can use the vga out, but there seems little else to do. We tried installing the Nvidia proprietary drivers through the software manager and yum and it failed both ways.
This is really frustrating because it seems like it should be such a simple thing but nothing works. Does anyone else have similar issues? is there something i can do to fix this? I apologize if i've not provided enough info, but ask and i'll post anything you need to diagnose.
View 2 Replies
View Related
Oct 19, 2009
This is a repost of my initial problem, I need some one who knows what they are doing more than I too take a look at this command output and give some sort of direction/clue/etc on what I'm doing wrong or missing.
Is my xorg.conf missing some vital line(s) or setting?
My best guess is that i'm missing something to tell the Xserver to use both screens, as the Xorg.0.log does not talk about trying to bring up the intel display; but this is just a hunch.
I'm running kubuntu 9.04 with 2 monitors: on-board intel video and a PCI nvidia display: I am using my nvidia display fine, but still can not get my 2nd display (the intel) working. What the heck am I missing?
lspci:
Code:
Code:
View 3 Replies
View Related
Jan 15, 2011
just setup suse 11.3 , put on the Nvidia 19.29-22.1 drivers via yast , no kms is set in inetd , nomodeset on grub boot line etc... Even tried installing the driver " the hard way " dual monitors come up, setup xinerama to "Extend" my desktop , and the main monitor ( right side ) is good, visually the left monitor (2ndary) is good.. but whenever I move my mouse over to the left screen the mouse pointer dissapears, flickers along the right hand border of that screen... and if i move the cursor back to the original screen i have to really fight to get it back to the main screen....Copy of my xorg.conf , still very basic...
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 260.19.29 (buildmeister@swio-display-x86-rhel47-04.
nvidia.com) Wed Dec 8 12:27:27 PST 2010
[code].....
View 9 Replies
View Related
Nov 19, 2010
I have a dual monitor setup in Ubuntu, with my main monitor on the right and the monitor I want to extend to on the left monitor, but I can't seem to get it to do this, it always has the 'desktop' on the left monitor and then extends onto what I want to be my main monitor. I have an ATI Radeon 4350 Graphics card.
View 1 Replies
View Related
Dec 10, 2010
Is there any way to put a dual monitor wallpaper on a single monitor configuration using desktop wall? Using only 1/3 or so per wall. Something that will have the effect like the scrolling wallpaper feature on Android/iPhone.
View 2 Replies
View Related
Dec 12, 2009
I recently upgraded to fedora 12. Before the upgrade I had a desktop background which filled the entire 2 screens. After the upgrade i noticed that the background is displayed on each monitor twice so when displaying the desktop I see the background twice.I tried to change the settings for it like 'center' and 'fill screen' but to no avail. The rest of the dual monitor setup works fine.
View 1 Replies
View Related
Mar 23, 2011
I need some help getting my dual monitors working in Fedora 12. I've tried some things from other posts and a few things from various websites and wikis (Gentoo), but nothing I've done has worked. To be honest, I can barely remember what I've tried and what I haven't anymore, because I feel like I've gone in circles.The card has one DVI out and I'm using a DVI-splitter to connect the two monitors. This configuration works on my Windows 7 boot. Also, the second monitor is detected, but shows no display.
View 1 Replies
View Related
May 3, 2010
I found this thread by looking up ultramon replacement: [URL] I would like to use "swapmonitor", to make it easy to move windows from monitor to monitor in a dual desktop environment. I have no idea how to install it.
View 1 Replies
View Related
Apr 6, 2010
have an Nvidia 8400GS installated (one VGA one DVi) and I have two Acer monitors (same size different model) one is attached VGA otehr DVI. The dual graphic seems to work; however, it is MIRRORED! It is not a "spanning" desktop that I would prefer. I tried to install the drive from nvidia but once I try to restart X it won't load and I have to revert back to my backup config which mirrors the desktop on both screens. (I can see myself typing on both screens.
[Code]....
View 1 Replies
View Related
Jan 10, 2010
Whenever I reboot my computer, my second monitor isn't activated and I have to manually set it up again.
View 3 Replies
View Related
May 2, 2010
Hard details first:
EVGA nForce 750i SLI mobo
E8400 Wolfdale OC@4.23Ghz
2x GeForce GTS 250 1Gb
2x Acer AL2216W
Soft details:
-Upgraded from 9.10 to 10.04
-I did not have a working SLI config in 9.10
-No matter what fix I tried, only one monitor
-Was running "190.53" 64-bit drivers
-I had spoofed the xorg.conf file to get both working, but only with both plugged into one board, and no SLI option enabled
-Functioning 3360x1050 workspace with the ability to move open apps across monitors, but unable to switch between multiple workspaces
[code]...
View 8 Replies
View Related
Apr 7, 2011
I have a dual monitor setup in 10.10, which acts as an extended workspace.
In previous versions of ubuntu, I could move panels around by grabbing them and moving them to the area within the second monitor.
In 10.10, I cannot seem to do that.
How do I create panels in this extended workspace on the second monitor?
View 2 Replies
View Related
Aug 19, 2015
I'm trying to set up a dual monitor system with my Dell E7450 laptop with Debian Stretch and KDE 4.14.2. The graphic card is a Intel HD5500 with xserver-xorg-video-intel version 2:2.99.917-2. The first time I simply connected the HDMI plug, it recognized the monitor and it automagically set up the extended dual monitor. Then I unplugged the HDMI and KDE froze. Now every time I plug in the second monitor the laptop monitor goes black, the desktop goes on the external monitor and the mouse cursor moves only vertically along the leftmost edge of the monitor.
View 1 Replies
View Related
Dec 24, 2010
I'm running openSUSE 11.3 64 bit KDE 4 standardI have two monitors attached, running simultaneously, nicely, all is well.But when I reboot I have to set them up again because the settings don't stick/endure through a reboot.The GUI configurator that I use is at Menu --> Config Desktop --> General --> Display.How do I save the underlying settings and re-invoke them at boot time, perhaps from the CLI? Or some quick process that will do the job.
View 8 Replies
View Related
Jan 5, 2010
Since my upgrade to 9.10 I can't expand my windows over two monitors anymore.
I'm using the NVidia software, external drivers and everything was working before.
Is there something I missed during the upgrade?
View 3 Replies
View Related