Debian Multimedia :: Xorg.conf To Get Back I915 Native Resolutions?

Jun 11, 2011

I disabled KMS and checked for direct rendering with the glxinfo command. glxinfo, reported that direct rendering is enabled. This is good news, because it means that the i915 driver is being used.

[Code]....

Now, I need to write a custom xorg.conf file to force X to use the native resolutions of my chip.

View 1 Replies


ADVERTISEMENT

Ubuntu Multimedia :: Xorg.conf Setting Up Native Resolution 1900x1200 & Dual Monitor

Jun 19, 2011

my laptop screen has 1900x1280 (native resolution) and my second monitor has 1600x1080

After browsing the forums and messing around with drivers I managed to get the resolution up to 1600x1080 (from 1000x800 at install) on the laptop screen. No luck at all with the second monitor. I currently have it connected with both VGA and DVI.

my understanding is I need to use twin view to setup the second monitor. I've read several of the earlier posts but haven't been able to get it to work. Here is my current xorg.conf file:

Code:
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Configured Monitor"
VendorName "Unknown"

[Code].....

View 9 Replies View Related

Fedora :: Where Are My Default Resolutions Stored - Aren't In Xorg.conf ?

Aug 18, 2010

I have two identical machines. I updated one (yum update), and now I can't view the display when it boots up; however, I can ssh into it. I'm pretty sure it's a resolution display issue on a KVM connected to the machines.

Years ago, I could view and change the default resolution in /etc/X11/xorg.conf. Now, it appears that information has been moved to another location.

My xorg.conf on the working and non-working machines is the same:

Code:

Nothing is mentioned about a resolution setting. Everything I google says to modify this file. Does anyone know where the default resolution settings are stored these days?

View 5 Replies View Related

Debian Multimedia :: X -configure Segfaults - Sid - Cannot Create Xorg.conf To Get A Correct Resolution

May 13, 2010

I am running kde 4.4 in virtualbox , but cannot create xorg.conf to get a correct resolution. X -configure = segfault. Older releases were fine - lenny, even ubuntu hardy / lucid.

View 6 Replies View Related

Ubuntu :: Create A Backup Of The Xorg.conf File - Cannot Stat /etc/X11/xorg.conf

Dec 11, 2010

I've just done a fresh install of Lubuntu 10.10 on an older Sony Vaio laptop. Having learned the hard way about editing xorg files, I wanted to create a backup of the xorg.conf file so that I dont have to do another install when I screw everything up. In a terminal, I typed

[Code]....

View 8 Replies View Related

Hardware :: Xorg.conf Is Replaced With A Default Xorg.conf After Reboot ?

Apr 9, 2010

I have installed Kubuntu 8.04.2 on a USB stick with persistence to keep any changes I make after a reboot and it works fine. I then installed the 185 Nvidia driver to give me higher resolutions and it works fine.

But each time I reboot, my updated xorg.conf is replaced with the default xorg.conf that ships with that version of Kubuntu and a backup is made of my updated xorg.conf (the correct one) which looks like xorg.conf.20100409135913. I have to put the backup xorg.conf back in place to get my Nvidia driver to work with the correct screen resolutions again. Otherwise my screen resolution is too low.

What could be causing this behavor? I'm sure it not the persistence feature of the USB stick failing since a backup is made of my original xorg.conf.

I might add more information. The xorg.conf that gets changed after a reboot says "This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database." #

View 11 Replies View Related

Slackware :: Difference Between Files (xorg.conf And Xorg.conf-vesa)?

Feb 16, 2011

1. What is the difference between files (xorg.conf and xorg.conf-vesa)

2. No matter how hard I try I can't change keyboard layout in xorg.conf-vesa (I change it in file ) but there is no actually anything changing, it starts to get annoying - for example - below goes my xorg.conf-vesa, if I uncomment and set line from

[Code]...

View 3 Replies View Related

OpenSUSE Install :: Precedence Of Xorg.conf Over Xorg.conf.d?

Jan 26, 2011

I've read the how-tos (thank you oldcpu!) and wikis about how xorg.conf take precedence over the section configuration files in etc/X11/xorg.conf.d/, if it exist. I also understand that the xorg.conf can be partial. If it is missing some sections, these will be taken from the corresponding xorg.conf.d section config file. Currently I'm using a xorg.conf generated by nvidia-settings in one of my home machines, due to a dual-monitor setup. After generating xorg.conf, the device sections are:

in xorg.conf:

Code:

Section "Device"
Identifier "Device0"
Driver "nvidia"

[code]....

My question is if the Option "UseCompositeWrapper" "True" will be used or not. In other words, if a section exist in xorg.conf then it's correspondent in xorg.conf.d/ will be completely ignored *or* only the lines in xorg.conf.d/ that already exist in xorg.conf will be ignored?

View 5 Replies View Related

Ubuntu :: Editing Xorg.conf - /etc/x11/xorg.conf Does Not Exist

May 3, 2010

I'm running the ubuntu based Green OS and cant get my video card properly configured. i've already gone through the forums to figure out what i need to do to get my ATI card working but my system wont let me access the xorg.conf file. i can see it using the the GOS file editor but it wont let me save the modifications. when i attempt to edit from a terminal window with su privelages it tells me that /etc/x11/xorg.conf does not exist. i've even tried booting into recovery mode and using the root instead of the sudo command. nothing i've tried will let me open the file.

View 3 Replies View Related

Debian Multimedia :: DisplayLink USB Graphic Adapter With Intel I915

Jun 6, 2014

I'm trying to set up an HP DisplayLink USB graphic adapter on Debian 6 to be paired with the notebook's integrated Intel i915 video card. I use a custom 3.11.1 kernel in which the options for VGA arbitration, fbdev framebuffer and DisplayLink driver are enabled as built-in, not as modules.

The device works and I'm able to correctly run an X session on a DVI monitor connected to my notebook thru this USB graphic adapter. However, I'm still not able to use both the DisplayLink device and the integrated Intel i915 at the same time under X, with the purpose to extend the desktop area over the two screens, side by side.

During a boot, if the DisplayLink adapter is detected over the USB cable, the X-server's Intel driver is repudiated as shown in the logs below, and the main notebook's screen stops working with X. (nonetheless, it still functions on the "Alt-F1" text terminal).

Relevant portion of /var/log/Xorg.0.log
In particular, it shows: [ 2509.084] (II) UnloadModule: "intel"
Code: Select all[  2509.061] (II) FBDEV: driver for framebuffer: fbdev
[  2509.061] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
        i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
        E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,

[Code] ....

In case it is required, this is the relevant excerpt of my xorg.conf. In my full xorg.conf file installed locally, no other options deal with graphics or screens.

Code: Select all# All down here is required for DisplayLink
# Depth must be 16 bits for all the screens to support DisplayLink
Section "Device"
    Identifier  "IntelVideo"
    Driver      "intel"
EndSection

[Code] ......

View 1 Replies View Related

Ubuntu Multimedia :: How To Add Modeline In Xorg.conf

Sep 1, 2011

I have an apple tv1 running ubuntu hardy. Due to audio video requirements I do not want to upgrade. I am trying to get 1080p24 working my TV. I ran X in verbose mode to ensure that my TV supports 1080p24 and it does. For some reason the X is not able to see the 1920x1080 @ 24Hz mode. I got the required information to add the modeline to my xorg.conf.

My xorg.conf is as follows

Code:

Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0

[CODE]....

When I check the Xorg log file I have the following warning

Code:

(WW) NVIDIA(0): No valid modes for "1920x1080_24"; removing. Is there any way I can append the valid modeline for 1920x1080 @ 24Hz to. I am avoiding using a modified EDID.

View 3 Replies View Related

Debian :: Fresh Xorg.conf For Eee Pc?

Jul 19, 2011

i lost touchpad functionality during gdm login (i cant tap clicking) after playing with xorg.conf

would somebody kindly paste-ing their xorg.conf for eee pc (1000HE) ?

View 2 Replies View Related

Debian Installation :: PPC G4 Where Is Xorg.conf?

Aug 5, 2011

I just did a net install on an old powerpc G4 and it seems pretty successful.except i cant change any of the monitor settings from the control panel in gnome (or LXDE)its showing 'not recognised' and only allows 768 x 1024 in very restricted colour.I dont think there is a hardware problem:

- the monitor is a generic old CRT which has worked fine with everything before this.

- the display card is an AGP 32Mb - original with this G4 and was working.

- the computer works great in Mac OS10.3 - (but OS10.3 doesnt support flash or up to date web browser any more, hence trying debian).

i have searched debian forums and various sites, but i couldnt find a fix. It looked like i should edit xorg.conf file but I am not able to find it. I looked in /etc/X11 - but not there.could someone tell me please, do i need to find xorg.conf?

View 7 Replies View Related

Debian :: There Is No Xorg.conf File In 6

Feb 18, 2011

I install Debian 6 in my thinkpad W500.

W500 has two video card : Intel integrated and ATI discreted .

Now I am using Intel Integrated video card . I find no xorg.conf file in /etc/X11 .

How to make Debian 6 using two different video cards through changing BIOS setting ?

View 8 Replies View Related

Debian :: How To Get Rid With Xorg.conf In Sid/unstable

Aug 15, 2010

I noticed that Sid/unstable (Gnome - kernel 2.6.33 - xorg 1.7) does not use xorg.conf file for X driver. The X driver seems to get detected automatically by the kernel and xorg, which is done perfectly even with 3D support. But I noticed that it uses the xorg.conf file for the input devices. When I renamed it, the keyboard and mouse were disabled. Is there a way to get the input devices detected automatically also and get red of xorg.conf file completely?

View 5 Replies View Related

Ubuntu Multimedia :: Mode Limit In Xorg.conf?

Apr 18, 2010

I am trying to fine tune the S-video output settings for my xubuntu box running 9.10. I am having some trouble getting modes loaded via xorg.conf. Currently, my xorg.conf file looks like:

Code:
Section "InputDevice"
Identifier"Generic Keyboard"

[code]....

View 1 Replies View Related

Debian Installation :: Missing The Xorg.conf?

May 24, 2010

I'm somewhat spoiled by standard installations that do it all. This time I'm doing it more manually.I've installed a sid guest vm. I want to give it a graphical face, so for a change I've chosen the lightweight xfce.Only I'm missing the xorg.conf. I've installed xdm, so I have a login. However, it can't get in from there.It hasn't yet generated an xorg.conf in /etc/X11.Short of copying one, which I suppose I might try, How do you prompt debian to generate and configure the xorg.conf from scratch?Currently, I have

root@sid:~# tail /var/log/Xorg.0.log
(II) Xen Virtual Pointer: Found absolute axes
(II) Xen Virtual Pointer: Found x and y absolute axes

[code]....

View 7 Replies View Related

Debian Configuration :: DDC Versus Xorg.conf

Jan 18, 2011

I'm trying to get the latest Lenny running on some old hardware (a Winterm 3150se). Everything is working just fine except for two things.

When Gnome starts, it comes up at 1600x1200 resolution, which is too high for my monitor. It shows a portion of the right side of the display, If I select Screen Resolution, it gives me a few standard choices, but if I pick one, it acts like it's trying to honor my request, then comes back as 1600x1200 again.

My xorg.conf file had no references to Modeline, so I added a 1024x768 Modeline, not really understanding where the selection I was given was coming from. Anyway, it didn't help.

I can see in the log file that right after the entry about using xorg.conf, it says 'Module "ddc" already built-in', which must have something to do with it?

My hardware supports all the usual video formats, at least it does when it's running WinCE. Is there a way to force the use of xorg.conf or can someone tell me why DDC is acting like it's "read only"? Is DDC a file somewhere?

My other problem is that the Winterm refuses to not try to boot from the flash memory thumbdrive even though it's formatted as a non-bootable device - it's my SSDisk. I have to boot without the drive in, then slip in in just as the boot process exits the blue start screen. I can live with this problem, since it might be dumb hardware.

View 1 Replies View Related

Debian Configuration :: Xorg.conf Not Used In Kernel 2.6.38?

Apr 12, 2011

I just system-upgraded (testing) to kernel 2.6.38. All seems ok, except that a few things I added to xorg.conf in the past (basically, keyboard language switch) have no effect anymore. My xorg.conf is still there, it is still the same as before, but the changes I did in XkbdLayout section have no effect. It seems xorg.conf is not used anymore. I assume new version of xorg uses a different configuration file, but I'm not sure.

View 8 Replies View Related

Debian :: Create An Image With /etc/X11/xorg.conf Or Without?

May 2, 2011

I'm creating a squeeze image, it should be installed on about 20 workstations, the same PC's, but different monitors. create /etc/X11/xorg.conf, or is it better to prepare without?

View 2 Replies View Related

Ubuntu Multimedia :: Xorg.conf Not Setting Res And Xrandr Unreliable

Jan 6, 2010

I am setting up a display system that will not have a keyboard/mouse and automatically boots into gnome and starts up firefox to a display page. The page is optimized to a 720p resolution which I can set when we use a TV for the display, but is not an option if we use a monitor. I am trying to find a way to set the resolution to 720p automatically on boot up. I am always using 16x9 displays with a DVI connection (to HDMI on TVs)

I was able to get one monitor working by creating a script and setting it to load in the Startup Applications as shown:

Code:
#!/bin/bash
scnres="1280 720 60"
modeline=$(cvt -v $scnres | grep Modeline)
modeline=${modeline#Modeline }

[Code]....

View 2 Replies View Related

Ubuntu Multimedia :: Get Screen Resolution Set In Mythbuntu 9.10 - No Xorg.conf

Feb 13, 2010

I'm trying to get my screen resolution set in Mythbuntu 9.10, but there is no xorg.conf on my system! I'm trying to figure out what to do (the xfce tool on mythbuntu doesn't offer the correct resolution, and I'm not even sure what driver I'm using). I've seen other threads saying to run nvidia-setup or somesuch. I assume the appropriate tool in my case would be aticonfig (I saw that elsewhere too) as I'm using an ATI Radeon 9600XT, but that tool says:

Code:

aticonfig: No supported adapters detected

View 4 Replies View Related

Ubuntu Multimedia :: No Xorg.conf - How To Change Color Depth

Aug 4, 2010

I want to change color depth, but there's no xorg.conf file to edit... what to do? btw, shouldn't there be a simple gui for that? Like for changing resolution

View 5 Replies View Related

Ubuntu Multimedia :: Add 320x200x8 Resolution/Mode To Xorg.conf?

Oct 1, 2010

I am trying to run using WINE. It has a platinum rating on the site, and runs perfectly on my laptop.on my desktop it doesn't seem to run at all.The screen goes black,then brings me back to the desktop. I manually ran the WINE command in the terminal, and it produced the error "err11settings:X11DRV_ChangeDisplaySettingsE x No matching mode found 320x200x8 @0! (XRandR)". The laptop and desktop are both running the same version of WINE (1.3.3) and have similar Nvidia cards (laptop has a mobile 9600, desktop has a 9800). I found a bug report on this exact issue on the WINE website (I'll paste a link), and they mention that the solution is simply to add the 320x200x8 resolution mode to Xorg.conf.

I've tried generating the line that I may need with a web-based modeline calculator, referenced on another thread, but it caused my system to fail booting. Luckily, I backed up xorg.conf before making changes and restored the old one via recovery mode. Here's the link to the calculator, I may just be using it wrong: [URL]

View 1 Replies View Related

Ubuntu Multimedia :: Edited Xorg.conf And Lost All Video?

May 3, 2011

I have Natty Narwhal and everything was working. Then I moved it to my HDTV, and I had overscan issues. Following some advice I found online, I edited /etc/X11/xorg.conf with new information including a ModeLine.

Upon restart, I get my BIOS screen, the Ubuntu splash, then... nothing. The display goes to sleep. I can ping the computer, and everything seems to work except I have no video.

I did backup my xorg.conf file, but I don't know how to get to it without a display. Hindsight tells me I should have given myself a way to remotely control my computer before messing with xorg, but you live and learn.

I've read online that there is a way from the login screen to get to Terminal without loading the desktop environment, but I can't get to the login screen.

I've also tried using a Linux LiveCD to access my filesystem, and that works to view files, but I have no root privileges.

Is there...

...a way to get to Terminal without loading the login screen?

...a way to give myself root access to my harddrive from a LiveCD?

...something else to try?

View 1 Replies View Related

Debian :: When Editing My Xorg.conf - Add The Automatically Keyword ?

Oct 17, 2009

The owners manual of my monitor gives me the following informations:

When editing my xorg.conf, do I have to add the automatically 'keyword' ? (saw nothing about it in man xorg.conf or man nv)

View 6 Replies View Related

Debian :: ASUS P7H55M PRO : XORG.CONF Not Working?

Jul 11, 2010

I have installed debian testing squeeze, I have such issues, so no X11 working when startx

Code:

Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,

[code]....

how to make the X11 working ? I have the console but well X11 is better and needed for apps such as skype

View 5 Replies View Related

Ubuntu Multimedia :: IBM ThinkPad X32, ATI Radeon Mobility M6 LY 9.10 Xorg.conf AccelMethod?

Mar 28, 2010

I'm running Ubuntu 9.10 on an oldish IBM Thinkpad X32 (12.1in 1024x768 LCD, 16MB ATI Radeon). On the initial install of 9.10 I couldn't get any higher resolutions working, following the instructions in [URL]..

1024x768 resolution is running ok but some graphics are noticeably slow - a prime example is the "File Browser", switching from one app to this app, you see a grey window for a second, and then finally the File Manager displays.

Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
# Screen "Screen0"
InputDevice "Mouse0" "CorePointer"

[Code]...

View 3 Replies View Related

Ubuntu Multimedia :: NoDDC Without Xorg.conf: No EDID Information Through Displayport/DVI

Apr 23, 2011

Apparently you can't get EDID information through a Displayport->DVI adapter. That means that a default install of Lucid (or Natty!) does not recognize the resolutions of any monitor connected with such an adapter.

I'd rather not create an entire multihead xorg.conf just to specify NoDDC. Is there any other way to pass that option to X?

View 1 Replies View Related

Debian Configuration :: HowTo Configure Touchpad Without Xorg.conf

Feb 2, 2010

for some reason I got taping on touchpad is disabled after some software upgrade or something.I can enable it with synclient TapButton1=1, etc.. but have got to do it every time I reboot. Also, I don't have Xorg.conf file. Is there any way I can configure taping to work permanently ?

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved