On my Debian 6.0 squeeze system, after reconfiguring GRUB and installing QEMU, X is sticking in 800x600 and not 1024x768. Yesterday I had no problems. Using a Rage Pro AGP 2X with 8 MB RAM (mach64 driver) on a i686 system. The kernel is the latest from squeeze's repo (2.6.32-5) and booted with the same settings as before despite the GRUB change to purge old 2.6 kernels.
View 1 RepliesI have been tasked to set up 2 monitors on SUSE Linux Enterprise that are a clone of each other, but each displaying different resolutions. The primary display has a max resolution of 1024x768 while the secondary display has a max resolution of 800x600.
The problem comes when the secondary display shows a "cropped" version of the desktop. Is there anyway to show different resolutions on each display while maintaining the proper desktop look?
[Code]...
I am not sure if this is the correct forum to post this topic (I was struggling between hardware and software). But since I do not think this was a problem with my hardware(monitor), I decided to post it here.
I have been tasked to set up 2 monitors on SUSE Linux Enterprise that are a clone of each other, but each displaying different resolutions. The primary display has a max resolution of 1024x768 while the secondary display has a max resolution of 800x600.
The problem comes when the secondary display shows a "cropped" version of the desktop. Is there anyway to show different resolutions on each display while maintaining the proper desktop look? I have attached the relevant portion of my xorg.conf.
[Code]...
I have two identical machines. I updated one (yum update), and now I can't view the display when it boots up; however, I can ssh into it. I'm pretty sure it's a resolution display issue on a KVM connected to the machines.
Years ago, I could view and change the default resolution in /etc/X11/xorg.conf. Now, it appears that information has been moved to another location.
My xorg.conf on the working and non-working machines is the same:
Code:
Nothing is mentioned about a resolution setting. Everything I google says to modify this file. Does anyone know where the default resolution settings are stored these days?
I disabled KMS and checked for direct rendering with the glxinfo command. glxinfo, reported that direct rendering is enabled. This is good news, because it means that the i915 driver is being used.
[Code]....
Now, I need to write a custom xorg.conf file to force X to use the native resolutions of my chip.
I just upgraded KDE on my openSuSE 11.2 installation. I have never had any problems doing this in the past, but this time, when I rebooted, I noticed that after a few seconds of idle time, my CPU usage goes sky high. I ran top in a console and noticed the culprit was xorg. I am using an NVIDIA card on an AMD64 3200+ with 1 gig of memory. KDE version is currently 4.5.85.
Like I said, I didn't have this problem until the last update. Any ideas as to what could be causing this?
I just posted about this in this thread, but as the other thread was started by a KDE user then I thought I'd post here as well. I've had high CPU usage for a few months now - probably since trying the 0.9 branch of Compiz then dropping back to the default openSUSE builds (XOrg and gconfd-2 running a Core i5 at about 30% on every core*). I've now finally found a solution after deciding I wanted to fix it once and for all.
Once again, the Ubuntu forums come to the rescue with this thread (I don't like the distro as a whole, but I do find the forums useful!). I'm using Compiz, but it turns out that Metacity was running as well. A quick "killall -9 metacity" and the gconfd-2 process has vanished and XOrg settled down to its normal 1-2% (which is reasonable when I've got a Conky config refreshing every fraction of a second to repaint a sound visualiser!). Now I just need to find out why Metacity starts when I'm using Compiz...
* according to Conky's per-core graphs, although top only reported 15% overall and the Conky "top 3 procs by CPU" reported a measly 3% for each process, so someone's maths was out somewhere!
I upgraded my Asus Eeepc 900a to 10.4 yesterday. Since then, Xorg has averaged between 30-40% CPU, and my fans have gone nuts running high/low/high/low, ad nausium.
Any ideas what might be going on? Another clue perhaps: on reboot or shutdown, I get a "program not responding" message with "unknown" as the hung program. I have not been able to determine what this program is or if it is related to the hyperactive Xorg.
I installed the NVIDIS driver for 64b Linux, and now I face a high cpu utilization (up to 40%) in the XORG when I swith from one application to another. I need the driver because otherwise some web pages are rendered with a something like a watermark
LSPCI
01:00.0 VGA compatible controller: nVidia Corporation G98M [Quadro NVS 160M] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Dell Unknown device 024f
Flags: bus master, fast devsel, latency 0, IRQ 169
Memory at f5000000 (32-bit, non-prefetchable) [size=16M]
Memory at e0000000 (64-bit, prefetchable) [size=256M]
Memory at f2000000 (64-bit, non-prefetchable) [size=32M]
I/O ports at df00 [size=128]
[virtual] Expansion ROM at f4000000 [disabled] [size=128K]
Capabilities: <access denied>
NVidia driver
260.19.21
uname -r
2.6.18-194.26.1.el5
I recently switched from jessie to stretch on both i encountered a jerky ui in gnome 3. after a longer research i noticed xorg consumes over 80% of my first cpu-core while moving a window. for testing purposes i switched back to the nouveau driver and there is no high cpu usage while moving a window, also the ui is smooth.
i tried 3 different nvidia driver: the one from the debian repository, the current stable and beta driver from the nvidia site. i noticed on all 3 the same problem.
Code: Select alldaniel@Daniel-PC:~$ glxinfo | grep rendering
direct rendering: Yes
  GL_NV_path_rendering, GL_NV_pixel_data_range, GL_NV_point_sprite,
  GL_NV_path_rendering, GL_NV_pixel_data_range, GL_NV_point_sprite,
  GL_NV_path_rendering, GL_NV_pixel_buffer_object, GL_NV_polygon_mode,
xorg.log: [URL] ....
dmesg: [URL] ....
system:
nvidia gtx 760
intel xeon e3-1230v3
With the upgrade to Squeeze and the 2.6.32-5-686 kernel, my Dell GX260's 82845 video chip suffers from the documented intel driver bug (freezes within a few minutes). I tried to fall back to the vesa driver, but am only able to get 640x480 resolution. The monitor is an LG L1720P.
I turned off kernel mode setting (via /etc/modprobe.d/i915-kms.conf), and modified xorg.conf -- added Modeline entries (from gtf) and
additional Mode lines to try to force resolution. Relevant portions of xorg.conf, dmesg and Xorg.0.log are shown below.
xorg.conf:
Code:
Section "Device"
Identifier "Generic Video Card"
Driver "vesa"
[code]....
I have just started to have a problem with Xorg it is always using at least 30% of my CPU, and the whole system does not run smooth so if I play a video it does not run smooth, it judders, also even if I drag an icon it judders across the screen. Im running Ubuntu 10.10 2.6.35-25-generic x86_64 VGA compatible controller: nVidia Corporation G98M [GeForce G105M] (rev a2)
View 5 Replies View RelatedI'm running 64-bit Karmic with the native 64-bit Flash plugin (not the 32-bit plugin with a wrapper).Before now, I had to pick between streaming music on Gnome or streaming music from Flash. In other words, if I was listening to music in Rhythmbox or Totem, I'd have to close all those sources before playing a flash video or else the sound wouldn't work. Likewise, if I was playing a flash video and wanted to listen to music in Rhythmbox or Totem, I'd have to close Firefox from the system monitor.
So I installed the PulseAudio Device Chooser, following all the instructions in this thread. Now I can't get any sound from Flash at all, but I can play as many Rhythmbox and Totem streams as I want at the same time. In the "Playback" tab of the PulseAudio Volume Control, Flash is never acknowledged as a playback stream.
I am appealing to the minds far greater than mine.. I have been using this forum with resounding success without having to post for some time, and I am more than impressed with what you can resolve by simply trawling through the archives, on this occasion however, I'm stumped.
I have a desktop upstairs in my home running 10.10, I have a Ralink Wirless LAN dongle RTL8188CUS with a mini CD with all the drivers etc. Now, when I physically install the dongle Ubuntu does not firstly even acknowledge it's existence, so, I unpack the CD Lynx dir and there seems to be no way to install it? I can't see a code to run in terminal to install.. nothing?
I have a small intel Atom based computer that acts as a 'combo' firewall / router / server / 802.11 Access Point that services my end user needs. I'm using hostapd 0.7.0 and Fedora 12 x86_64. The system works fine on Fedora 11. I decided to upgrade to Fedora 12 last night, and completely broke my wireless. Note that configurations are _identical_ between the Fedora 11 and Fedora 12 installation. Though, I did recompile the hostapd binary under Fedora 12 libs, etc.
Anyway, Client #1 associates fine. Client #2 associates, and hostapd hangs. Strace'ing the process shows nothing... just.. dead. SIGTERM works, but hostapd is unable to 'unallocate' the wlan0 interface, which appears to be in a hung state, so I can't simply re-start hostapd. So, I have to remove wlan0 from my bridge, them rmmod ath9k, modprobe ath9k, re-add wlan0 into the bridge, restart hostapd.. But the second association consistently hangs it every time. Next, I went and downloaded the latest compat-wireless drivers as of this posting. Selected the ath9k driver, built the modules, replaced them in my /lib/modules tree, depmod'd, reboot, etc..
BIG difference. Now hostapd does not hang, and there appears to be better logging/debug than ever before. This made me happy. Unfortunately, there appears to be a new problem. Clients can now associate, but only for a split second. They are immediately disconnected, and the following message appears via hostapd's stdout logging: hostapd: wlan0: STA 00:21:5c:39:a3:99 IEEE 802.11: did not acknowledge authentication response
For every client that attempts connection. Note that I'm using WPA2-EAP-PEAP w/ MSCHAPv2. I've also, for kicks, just tried regular WPA2-PSK with similar results. I'm using a mixture of clients, Windows XP, Windows 7, Linux Ubuntu, Fedora, and others.
[Code].....
I am currently trying to get Google's Android Debug Bridge working, which is as simple as running one of the executables in the sdk's tools folder.It seems to be blatantly refusing to run the binary. Here is the command and more info on the actual file:
Code:
jonhaller@jonhaller-laptop:~/Downloads/android-sdk-linux_x86/tools$ file adb
adb: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.8, not stripped
jonhaller@jonhaller-laptop:~/Downloads/android-sdk-linux_x86/tools$ ls[code].....
there seems to be a problem that has arisen with my beloved netbook (acer one 10.4")running Ubuntu Netbook. the mouse generally works fine (both menovering and clicking) while using the desktop, but as soon as an application is opened you are unable to click on any of the options within the application (buttons, etc). i have tested this over and over, and what seems to be the problem is that the pointer ignores the application and will always click the desktop.
i have used several diffrent mouses (both usb and trackpad) but the problem remains. i assume this means there it is a software fault. if anyone has ANY suggestions, advice, etc. feel free to post. would like this to be fixed asap!
I created a system backup ISO with remastersys that's about 3.4 GB, and I've repeatedly had failure and about 4 coasters now with both K3b and Brasero trying to burn it. I even ditched the original ISO and made another- same problem.I have always had problems burning discs in both programs, and of all the times I've tried to burn anything with either, I've gotten errors near the end of the data check stage, in verifying the data burned. I'm really tired of this, and I need this ISO perfect to reinstall my OS on a new laptop harddrive.This time it's K3b. It burned successfully, but I get errors in the data verification stage. Here's what I got:
Code:
System
K3b Version: 1.0.4
[code]....
I was recently assigned to enchance a ftp-server with SSL/TLS support. When I started investigating I found out that the server is a virtual (openvz) ubuntu machine with vsftpd. Enabling ftps was easy enough, I just added the following lines to /etc/vsftpd.conf
Code:
ssl_enable=YES
allow_anon_ssl=NO
force_local_data_ssl=NO
force_local_logins_ssl=NO
ssl_tlsv1=YES
[Code]...
When ever I try to sftp or even ssh into my server I get connection refused.
I have the port forwarded in my router.
What am I missing?
Also I have installed Ngnix so what do I need to do for it to work?
I ran an update on ubuntu server today, and after a long install process, it spat out an error, telling me to run "sudo dpkg --configure -a". After I ran that command, I was no longer able to access my website or forum. I could really use some help with this one, I've tried so many things including disabling shorewall, restarting apache, so many things...
View 9 Replies View RelatedThe ssh server is running Xubuntu 9.04. It was working before. Then I tried SSHing today and it gave me a connection refused. The computers I've tried SSHing from were running Ubuntu Netbook Remix 10.04, MacOS, and Solaris 10. None of them would connect. The ssh server is running the latest version of openssh-server (according to apt-get install). I'm assuming something in /etc/ssh/ got changed but I'm not sure.
View 1 Replies View RelatedI got a mixer today and did everything correctly there and I am trying to put the audio through the microphone input which is fine. But when I try to record through Audacity it's as though the microphone and mixer aren't plugged in. I've played around with the settings in both qJackctl and Audacity only to result worse off than before. Can anybody tell me what I'm doing wrong?
View 1 Replies View RelatedSince I cannot upgrade Adblock Plus anymore because iceweasel is too out of date for the new versions, I am trying to give privoxy a try. I am following the howto Block Ads & Fast Caching w/Privoxy +Squid without success. I am always receiving the error:The proxy server is refusing connections Iceweasel is configured to use a proxy server that is refusing connections.Check the proxy settings to make sure that they are correct.
I added these lines to /etc/privoxy/config
enable-remote-toggle 1
enable-edit-actions 1
permit-access 127.0.0.1
Moreover, I have edited the /etc/hosts file to block urls providing adverts and anything I wanted rejected.
There are two Fedora 12 systems which are now refusing to hibernate. The hibernation sequence seems to happen but then things hang indefinitely with a black screen and a blinking cursor, top left. I don't know where to start looking for clues; what do I look for in the logs, could someone please point me to a good hibernate/suspend troubleshooting guide?
One of the systems just recently got out of whack, for no apparent reason; it hibernated great for a couple of years, even as it went through upgrades from Fedora 9. The other stopped hibernating after its F9 -> F10 upgrade. This one lacks non-root hibernation permissions, but when I issue "/usr/sbin/pm-hibernate" as root, it goes through the motions and then hangs at black screen also.
I have an HP tx2500 tablet pc running 9.04, which I was trying to configure the tablet for using the .fdi method on this page. After I redid the .fdi file, I rebooted, and it gave me a flashing screen, similar to the one i got when I tried to install 9.10.
I tried going into recovery mode and using xfix: bad idea. Then, I tried installing envy and reinstalling the drivers from there. That failed as well.
So now, when I try to manually remove the ati packages,(from command line in recovery mode) it doesn't let me, because of some problem with "fglrx-kernel-source" I can't configure, remove, or purge.
I have a Compaq server, as per the title, and I wish to install Ubuntu Server onto it but ran aground when I found it got to trying to run the installer after the CD Boot menu, it just stopped there, waited 180 seconds (as per the error's details) and then locked up with the Caps Lock & Scroll Lock lights on the keyboard flashing.
Now I know it's not the server, as I have installed other OSes onto it in the past, including an older version of Ubuntu server (9.04), I did try and re-install the 9.04 version but the CD I had was too scratched up and got to a point in the installer (copying files) where it just failed cos it couldn't read the disc.
The specs of the thing are:
Dual PentiumIIIs 1.4GHz
512mb RAM (keep meaning to upgrade it)
3x 18.2GB 10k SCSI HDDs (Storage)
[code]...
Not sure what else is in there, but the full specs are on the web...
My aim was to build a VERY simple smtp proxy under debian to handle mail from a port (51234) and forward it to the standard 25 port. I compile and install a "delegate" witch can handle easily that. It's working very well like that : delegated SERVER="smtp://anotherSmtpServer:25" -P51234
The strange thing is, it's working on my virtual test machine and on the dedicated server in local but I can't manage to use it trought internet. I test it like that. telnet [mySrv] 51234 Of course, no firewal, no deny host, no ined/xined, the service delegated is listening on the right port ... 2 clues : The port is answering trought internet with nmap as "51234/tcp open tcpwrapped" have a look at the tcpdump following :
[Code]....
Having some problems, which seems to be the norm for linux mint 9.
Background: I decided I wanted to try LibreOffice out so followed the instructions here: [URL] to install libreoffice.
After a week I found that LibreOffice doesn't actually have a spell checker or thesaurus even though it says it does. Decided I'd had enough so uninstalled it and auto removed the rest of its gumpf and attempted to install openoffice which actually worked, before. Problem is I can't, linux mint wont let me and keeps outputting random rubbish that makes no sense ie:
Code:
spud@spud ~ $ sudo apt-get install openoffice.org
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code]....
I start using Ubuntu, after successfully installed it without any problem.Then I downloaded latest updates, etc. But,after installing a display driver, my computer freezes, refusing to go beyond the welcome screen. I tried several ways but could not solve the problem. So I decided to re-intall Ubuntu, download again the updates, again configure my settings, etc. herefore, I'd like to know whether there is any application to backup or to create a full image of a hard disk so as to avoid the long hours of re-installation.
View 4 Replies View Related