Fedora :: Where Are My Default Resolutions Stored - Aren't In Xorg.conf ?
Aug 18, 2010
I have two identical machines. I updated one (yum update), and now I can't view the display when it boots up; however, I can ssh into it. I'm pretty sure it's a resolution display issue on a KVM connected to the machines.
Years ago, I could view and change the default resolution in /etc/X11/xorg.conf. Now, it appears that information has been moved to another location.
My xorg.conf on the working and non-working machines is the same:
Code:
Nothing is mentioned about a resolution setting. Everything I google says to modify this file. Does anyone know where the default resolution settings are stored these days?
View 5 Replies
ADVERTISEMENT
Apr 9, 2010
I have installed Kubuntu 8.04.2 on a USB stick with persistence to keep any changes I make after a reboot and it works fine. I then installed the 185 Nvidia driver to give me higher resolutions and it works fine.
But each time I reboot, my updated xorg.conf is replaced with the default xorg.conf that ships with that version of Kubuntu and a backup is made of my updated xorg.conf (the correct one) which looks like xorg.conf.20100409135913. I have to put the backup xorg.conf back in place to get my Nvidia driver to work with the correct screen resolutions again. Otherwise my screen resolution is too low.
What could be causing this behavor? I'm sure it not the persistence feature of the USB stick failing since a backup is made of my original xorg.conf.
I might add more information. The xorg.conf that gets changed after a reboot says "This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database." #
View 11 Replies
View Related
Jun 11, 2011
I disabled KMS and checked for direct rendering with the glxinfo command. glxinfo, reported that direct rendering is enabled. This is good news, because it means that the i915 driver is being used.
[Code]....
Now, I need to write a custom xorg.conf file to force X to use the native resolutions of my chip.
View 1 Replies
View Related
Jul 22, 2009
I have problems with keyboard layout switcher. On Gnome everything works. But when I start to use other DE I can't switch keyboard layout by default. So I create xorg.conf, but anyway it doesn't work...
View 1 Replies
View Related
Dec 11, 2010
I've just done a fresh install of Lubuntu 10.10 on an older Sony Vaio laptop. Having learned the hard way about editing xorg files, I wanted to create a backup of the xorg.conf file so that I dont have to do another install when I screw everything up. In a terminal, I typed
[Code]....
View 8 Replies
View Related
Feb 16, 2011
1. What is the difference between files (xorg.conf and xorg.conf-vesa)
2. No matter how hard I try I can't change keyboard layout in xorg.conf-vesa (I change it in file ) but there is no actually anything changing, it starts to get annoying - for example - below goes my xorg.conf-vesa, if I uncomment and set line from
[Code]...
View 3 Replies
View Related
Jan 26, 2011
I've read the how-tos (thank you oldcpu!) and wikis about how xorg.conf take precedence over the section configuration files in etc/X11/xorg.conf.d/, if it exist. I also understand that the xorg.conf can be partial. If it is missing some sections, these will be taken from the corresponding xorg.conf.d section config file. Currently I'm using a xorg.conf generated by nvidia-settings in one of my home machines, due to a dual-monitor setup. After generating xorg.conf, the device sections are:
in xorg.conf:
Code:
Section "Device"
Identifier "Device0"
Driver "nvidia"
[code]....
My question is if the Option "UseCompositeWrapper" "True" will be used or not. In other words, if a section exist in xorg.conf then it's correspondent in xorg.conf.d/ will be completely ignored *or* only the lines in xorg.conf.d/ that already exist in xorg.conf will be ignored?
View 5 Replies
View Related
May 3, 2010
I'm running the ubuntu based Green OS and cant get my video card properly configured. i've already gone through the forums to figure out what i need to do to get my ATI card working but my system wont let me access the xorg.conf file. i can see it using the the GOS file editor but it wont let me save the modifications. when i attempt to edit from a terminal window with su privelages it tells me that /etc/x11/xorg.conf does not exist. i've even tried booting into recovery mode and using the root instead of the sudo command. nothing i've tried will let me open the file.
View 3 Replies
View Related
Feb 3, 2010
While trying to implement some of the suggestions in the fedora 12 common problems (Intel Graphics)I discovered I cannot get the resolution correct using a xorg.conf file . Here is the file# Xorg configuration created by system-config-display
Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
[code]....
View 5 Replies
View Related
Sep 2, 2010
Cannot edit xorg.conf on Fedora13. I do it from the root but changes is not saving.
View 7 Replies
View Related
May 22, 2011
I have used nVidia my entire linux life (about 5 years clean and sober from M$). Recently, I have switched over to an ATI Radeon HD 5550 card. After many trial and error setups, I finally got the resolutions and screens set properly with a xrandr command, which I have now added to a shell script in ~/.kde4/Autostart. It has worked for me for a while now, but I really would like to get it set in the xorg.conf.d files so that I don't have to wait that extra few seconds after login for the screens to fix themselves.
Is there an easy way to take what xrandr does and export it to the xorg.conf.d files? If my video card recognizes my default monitor as DFP2 and the tv that I only sometimes use with this computer as DFP1, how can I ensure that the login screen for openSUSE/KDE4 appears on my default screen (an issue that drove me nuts a few months ago when I tried Ubuntu to see what all the fuss was about)?
My xrandr command that I use to fix it all is:
xrandr --output DFP2 --auto --pos 0x0 --primary --output DFP1 --auto --right-of
I am using the proprietary Radeon driver from the ioda repository. DFP2 is a monitor which has a optimum resolution of 1920x1200, and DFP1 is an 1080p HDTV. I can not reverse the output plugs for the screens even though my monitor is an HDMI monitor because I use the actual HDMI port on the video card to output audio to the television and the other plug is a DVI that I convert to HDMI for the monitor.
View 1 Replies
View Related
Sep 7, 2009
I'm using FC10 and few WM (Fluxbox, E17, LXDE) this WM's have no spetial application (applet) to set/change keyboard layout.
I edited my xorg.conf:
Quote:
In older release (FC9) with this config and alt+shift combination keyboard layot are changed, but not in FC10
View 6 Replies
View Related
Oct 19, 2009
I tried to install the Catalyst 9.9 driver on Fedora 11 64bit. Only when I was finished with the guide, I read the comments that said it wouldn't work on 2.6.30 kernel.I've written over my old xorg.conf, blacklisted radeon and radeonhd, restarted my machine.When i restarted my machine X wouldn't work ofcourse and all I got is some red coulor in the top of the screen, and no access to terminal via ALT+F2->F6. only way to get access is to add "telinit 1" to the startup line in GRUB
I've tried
Code:
X -configure
and
Code:
system-config-display --reconfig
The first dosen't work and the last dosen't seem to be installed....since i'm on wireless the network has problems to connect....I can pull a cable but not right now.....
I have yet to try:
Code:
[root@fedora ~]$ /usr/share/ati/fglrx-uninstall.sh
View 3 Replies
View Related
Dec 6, 2009
I have just installed Fedora 12 (64 bit), and I'm having troubles getting it working on my widescreen LCD TV. Before I installed the nvidia driver, it worked fine. After I installed the nvidia driver, it showed output on the screen until it gets to the logon screen (I never actually see the logon screen), where it goes black.
I'm assuming this is to do with my xorg.conf file, but I cant for the life of me work out what I need to change. I have been playing with all sorts of options, with no success.
View 4 Replies
View Related
Dec 30, 2009
I am trying to configure an additional input device so I need to edit my xorg file. Any change I make is being lost when I reboot. The xorg gets reverted to seme default configuration. Even if the change is as simple as adding a comment. I have tried disallowing livna to edit the configuration file (using livna display configuration), but when I reboot, the system reverts back to the vesa display drivers.
How can I figure out what is recreating the xorg file? How can I disable this so my changes persist. Or is there another file I can add input devices to (or a way to automatically add them upon boot but before x starts?)
View 1 Replies
View Related
Aug 13, 2010
What is the command I use to edit the xorg.conf in fedora?
Achieve using the following command:
View 2 Replies
View Related
Sep 23, 2010
Now that xorg.conf doesn't exist, how to get a working copy of the xorg.conf that would set it up as it is currently? I tried xorg -configure -retro but that just gives me a black screen.
View 13 Replies
View Related
Dec 18, 2010
Something bad happens after installing nvidia driver for my fedora 14. It's about the stored driver/xorg configuration, and it only affect on my current account. So I wanna know where can be a one-user-only VGA driver configuration stored. I'll delete it, it's give me a big trouble. Belows are how it become like this, and how the trouble appears. after nv driver installed, I change the /etx/X11/xorg.conf file and start another X with another account without exit current X. Now, everytime when I start gnome with current account, it pop up a message writes
Could not apply the stored configuration for monitors none of the selected modes were compatible with the possible modes: Trying modes for CRTC 354
[Code]...
And I have to wait for this pop-up message to disappear. During this some 2 minutes, I can't do anything, even Ctr+Alt+F5 to switch terminal fails. I can't PrintScreen neither. I've been uninstalled nv driver twince for this. but right now I decide to fix it.
View 2 Replies
View Related
Apr 13, 2011
i have a Fedroa12 installed as a VM, and my problem is that i can't change the resolution higher than 800x600 .
i am trying to do that with an Xorg.conf file. here is what i did:
1. telinit 3
2. Xorg -configure (root user)
3. cp /root/xorg.conf.new /etc/X11/xorg.conf
4. inside xorg.conf i have added the following:
under the "screen" section i have added:
DefaultDepth 24 then under the "SubSection" of Depth 24, i have added:
Modes "1680x1050" "1028X768" "800x600"
but then whenever i am try to start the X, it fails with the following message: no screen found...
since i am doing it for studying only, how to configure properly the xorg.conf file ?
View 2 Replies
View Related
Apr 5, 2011
I am new to RHEL. I am using a Thinkpad W510 and SL 5.5. I am trying to get everything working smoothly on my system.I am having issues with the gpu drivers and the touchpad, both of which seem to be traced back to xorg.conf.I can set the proper resolution using nvidia-settings, but it resets to 800x600 on restart no matter what I do. I have used the gui to save, I have tried nvidia-xconfig, and I have tried to just editing the xorg myself, but it always goes back.I am having even worse problems with the trackpad. I downloaded and installed the synaptics package, but nothing I do changes the trackpad settings. Mouse properties has no trackpad info in it.
View 9 Replies
View Related
Jan 27, 2010
FC12-x86_64/KDE How can I lock in the 1024x768 resolution in xorg.conf ?
The Option PreferredMode is Ignored , checking in Xorg-0-log.
If I put in Modes "1024x768" it gets changed everytime I reboot.
I'm using the Nvidia driver. Can't use the nouveau driver, the mouse disappears when waking the computer up after about a half hour of sleep, then I have to restart computer to get mouse to reappear.
View 5 Replies
View Related
Mar 6, 2011
On my Debian 6.0 squeeze system, after reconfiguring GRUB and installing QEMU, X is sticking in 800x600 and not 1024x768. Yesterday I had no problems. Using a Rage Pro AGP 2X with 8 MB RAM (mach64 driver) on a i686 system. The kernel is the latest from squeeze's repo (2.6.32-5) and booted with the same settings as before despite the GRUB change to purge old 2.6 kernels.
View 1 Replies
View Related
Oct 31, 2010
I have been tasked to set up 2 monitors on SUSE Linux Enterprise that are a clone of each other, but each displaying different resolutions. The primary display has a max resolution of 1024x768 while the secondary display has a max resolution of 800x600.
The problem comes when the secondary display shows a "cropped" version of the desktop. Is there anyway to show different resolutions on each display while maintaining the proper desktop look?
[Code]...
View 4 Replies
View Related
Oct 29, 2010
I am not sure if this is the correct forum to post this topic (I was struggling between hardware and software). But since I do not think this was a problem with my hardware(monitor), I decided to post it here.
I have been tasked to set up 2 monitors on SUSE Linux Enterprise that are a clone of each other, but each displaying different resolutions. The primary display has a max resolution of 1024x768 while the secondary display has a max resolution of 800x600.
The problem comes when the secondary display shows a "cropped" version of the desktop. Is there anyway to show different resolutions on each display while maintaining the proper desktop look? I have attached the relevant portion of my xorg.conf.
[Code]...
View 6 Replies
View Related
Feb 4, 2010
I just installed Fedora 12. I have an NVidia FX 5200 card. This xorg.conf will work fine (no 3d acceleration, btw):
[Code]...
Now here's the odd part. If I uncomment the Device section and reboot or logout so that X restarts, my screen will not enter graphics mode. It just flashes on and off several times in text mode and finally stops. It's as if it keeps changing modes trying to get happy and never does.
View 3 Replies
View Related
Feb 28, 2010
I just installed Fedora 12 on a RM (research machines) nBook 4000.
Whilst the trackpad allows me to move the mouse pointer about, it doesn't respond to tapping. Is there anything I can do to get it working properly?
Also, the laptop has an integrated Intel 82852/82855 GM/GME graphics card. How can I tell if it is being detected and working properly? I don't seem to have an xorg.conf file.
View 2 Replies
View Related
May 27, 2010
Just have F-13 32 bit installed. But can't find xorg.conf. The screen resolution is only 800x600. The LCD display and the video card can support 1640x1280. Please where can I find a standard xorg.conf. Or how to create it here?
View 14 Replies
View Related
Dec 27, 2010
I run fedora on a server only from command line. I need to change the resolution.
I tried to create a basic xorg.con file with Xorg -configure. But Xorg command does not exist. Which rpm do I need to install?
View 8 Replies
View Related
Sep 3, 2011
I plugged in an LCD to my x41 thinkpad's VGA port and GNOME was smart enough to add it to my laptop without much prompting. A little fiddling around gave me a large spanned desktop so the cursor can pan from side to side of the two joined screens.I was wondering if I could somehow make my other window managers use this configuration, but there is hardly an xorg.conf, only the things I had in xorg.conf.d. I would like to somehow 'grab' this config and share it across WM's. My second best option would be to grab someone's dualhead xorg.conf for an intel 915GM graphics chip.
View 3 Replies
View Related
Feb 26, 2009
Is it possible to import an xorg.conf file from Debian to Fedora and have it work? The reason for this is that I have an older monitor that only offers 800x600 as the maximum resolution.
View 2 Replies
View Related
