I am looking at purchasing a laptop (HP EliteBook Mobile Workstation), but I am not sure whether to buy one with ATI or NVIDIA graphics. My only real concern for graphics is driver support. Which has better support?
BTW, I dont know if this is important, but I will be installing Fedora linux. 12 or higher.
It would appear Nvidia are to drop support for the 'nv' driver,recommending using the Vesa driver instead until you install their proprietary driver.Read the article here:
View 14 Replies View RelatedI apologize if this is a duplicate post but I was unable to find anything that addressed my question. Currently I've installed the nvidia developer driver (beta) found here:[URL]..
After installing the driver everything works correctly. Rebooting the system results in a hang prior to starting X. Opening a new console and running start X provides me with the following error:
Code:
[ 103.884]
X.Org X Server 1.8.2
Release Date: 2010-07-01
[ 103.885] X Protocol Version 11, Revision 0
[ 103.885] Build Operating System: x86-10 2.6.32-44.el6.x86_64
[Code]..;.
At this point if I reinstall the driver and reissue startx, again the system starts up properly. Also I've noticed that after a reboot, my xorg.conf file is being overwrriten.
Pretty self explanatory, I can't get the NVidia driver to work with my laptop's 310M. And yes I have tried both steps in .64&postcount=9, but to no avail. The two error messges I'm seeing are "(EE) No devices detected." and "Fatal server error: no screens found".
View 3 Replies View RelatedSince 11.4 I am having troubles with getting the correct config on my desktop.I am using a laptop, which means a lot of switching between various monitors en projectors.If I start nvidia GUI to change everything works (only as root user). But with the tool from KDE it is not possible to detect any other display than the one from my laptop. It is complaining about randr.However. Nvidia works fine, but I hat it to restart X every time etc. I am using an Xorg with nvidia tool which is not preferable in 11.4.
View 4 Replies View RelatedI have a HP laptop which can support 1600x900. But after I install ubuntu 9.10 on it, it can only support up to 1280x700. My laptop has a Nvidia graphics card. And i am using GNOME as my desktop environment.
View 1 Replies View RelatedI'm trying to find out when QME2572 (Qlogic) card became support by the kernel. We have a RHEL 5.1 system that is moving to new hardware, however the kernel at this release doesn't support the new hardware, due to the Qlogic card change. I tired the Redhat KB and Bugzilla. Is there a Kernel change list etc I can search. Never really played around with the kernel too much so I'm just after some pointers for looking up this information. Offically its not supported until Redhat 5.3, I'm trying trying to research kernel info so I can tell the customer they have to upgrade.
View 3 Replies View RelatedI own an ASUS N61JV-X2 notebook PC that has an Intel HD IGP, nVIDIA GeForce GT 325M GPU, and nVIDIA Optimus technology. I am running OpenSUSE 11.4 64 bit with GNOME. I used to be a former Ubuntu user. I used Ubuntu 10.10 Maverick Meerkat 64 bit. In Ubuntu, it was not recommended that I install the proprietary nVIDIA binary drivers because it would cause me to log into a TTY console upon reboot.
nVIDIA states that they have no plans to support Optimus technology in Linux at any time. Would it be recommended that I install the proprietary nVIDIA binary drivers in OpenSUSE 11.4 64 bit with GNOME? Will I get the same problem as in Ubuntu? How do I do this?
i installed the new beta 10.04 and it seemed right after the install and update that both nvidia hardware drivers were automatically install together. i deactivated both drivers. one driver showed the nvidia 173 driver and the other one showed "current" nvidia driver.
after a restart i then tried to activate the 173 driver. system required a restart. so i did. system booted to a black screen. i believe its at the desktop but i am unable to see it. i tried to hit esc at the boot screen to enter the grub menu but that didnt work.
The freeze's on my machine only appears when i monitor the temperature of
the gpu. Normally i use gkrellm to monitor temperatures including the gpu temperature. When i stop gkrellm there a no more freeze's on my system. Then i started nvdock which also monitor the gpu temperature and the freeze's are back. Stopping nvdock make the system working normally. I have done a few reboots now, warm and also cold starts und everything works normal.
System data: AMD P2 X4 940, Nvidia GTS 250, openSUSE 11.3, Nvidiadriver 256.44,
Gigabyte Mainboard GA-MA78G-DS3H rev.2,8GB RAM, KDE 4.4.95,
Does somebody know if the NVIDIA driver from NVIDIA repository supports Cuda?
View 2 Replies View RelatedI am experiencing the following issue. After enabling SLI and PhysX in windows vista, my dual boot fedora 10 does not see the NVIDIA driver.
Doing: cat /proc/drivers/nvidia/0 I get? in the VGA bios for both cards.
I disabled both SLI and PhysX in vista, but the problem persists. I powerdown and unplugged the rig for several hours without results.
Here are my specs:
CPU: Intel Q9300
Board: MSI P7N Diamond
CARD0: EVGA Gforce 8800 GTS
CARD1: EVGA Gforce 8800 GTS
RAM : 4 Gbytes OCZ gold PC6400 (4 x 1 Gbytes)
PSU : Thermaltake SLI ready 850 W
It is important to mention that initially Fedora did see the cards and I was able to set up a dual monitor system. It right was after I enable SLI and PhysX and re-booting into Linux that the problem showed up.
I have seen this issue before in another machine with an ASUS board, but not until today I associated with the SLI setup. My guess is that there has to be something that the driver is enabling in the cards that messes up the interface between the nvidia.ko module and the kernel, but I don't know what may fix it. I need this system for some numerical calculations.
Only about 1.5 weeks into Linux guys so bear with me. I'm trying to uninstall the Nouveau driver and install NVIDIA-Linux-x86-71.86.14-pkg1.run for my old Nvidia TNT2 card. Following these directions I run into a problem in the first step. When I execute the Ctrl+Alt+F1 command and get:
Ubuntu 10.10 splat-desktop tty1 splat-desktop login: if I enter splat which I believe is my username and the correct p/w I get an incorrect login response.
There is one thing missing (I think) a clear guide to clearing out Nvidia and replacing it with nouveau. For all but hardened gamers, nouveau on 11.4 delivers. It also removes one more barrier to what I think is the intended goad of Tumbleweed.The problem IMHO is not that there are no clear guides. The problem is there are too many. No sooner does one person do a guide (that is clear) and someone else who does not like some point writes another guide that they think is more clear (but in fact is less clear in other aspects). And this goes on ad infinitum.IMHO we have too many guides - many of which are sufficient clear ... but the VAST number only serves to confuse users more.
Having typed that, IMHO this is NOT a Tumbleweed specific issue, but its MUCH WIDER in scope and hence does not belong as a discussion in this Tumbleweed thread.
Can do nothing with the PC. New install of 10.04 and was prompted to install Nvidia driver. Did so. Rebooted, now have nothing except a thin line at top of screen. How can I remove this driver when I see nothing?
View 2 Replies View RelatedCurrently using Nvidia driver version 195.36.31, it's the version that works with Nvidia-kernel-dkms, would updating Nvidia driver to the current 275.09.07 driver version break my setup?
View 3 Replies View RelatedHow do I check if I'm using the Nouveu driver or the Nvidia Binary driver? I thought things were running nicely with the free driver because I had compositing working on my dismal graphics card... But scrolling in firefox is slow/laggy so I tried installing the binary driver with 1click install. But I restarted and still have the same problem. I think I might still be using the nouveu driver? Actually, scratch that last sentence. I just did lspci -v and got this output:
Code:
01:00.0 VGA compatible controller: nVidia Corporation NV37GL [Quadro FX 330/GeForce PCX 5300] (rev a2) (prog-if 00 [VGA controller])
Subsystem: Giga-byte Technology Device 310e
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at f0000000 (32-bit, non-prefetchable) [size=16M]
Memory at e0000000 (32-bit, prefetchable) [size=256M]
[Code]...
install debian 6 on my pc and have big problem with videoadapter driver i cannot install driver i dowload driver from nvidia do something in google but nothing! palit gtx 460 linux debian 6 x64.
View 3 Replies View RelatedI've been doing some looking around on the general issues of ATI vs. NVIDIA for linux. I'm buying a new laptop, and obviously want to maximize linux compatibility.
Here's what I've understood so far. For the people who know: is my understanding right?
ATI has open source drivers, but they're kind of spotty. Also, ATI relies on the vendors to provide drivers, so if the company selling the laptop doesn't provide linux drivers, you're out of luck.
NVIDIA doesn't have open source drivers, but their closed source drivers provide good linux support. They provide drivers directly, rather than relying on the laptop vendor, so chances of linux support are better.
Anybody else have experience/knowledge in this area? I'm looking to do things like 3D gaming, video editing, playing back HD online video, possibly even some graphics rendering if I decide to pick that up...
Most of the laptops I'm looking at either have the NVIDIA GT425M or the ATI HD5730.
I finishing a install of F14 (i386) on a Laptop with the Nvidia fx 5650 gpu I installed the drivers from the Nvidia site. BUt when trying to set up Desktop effects, I get a Accelerated 3D graphics is not available.
I had effects working in F11 so wondering wjhat I may need to do to get 3d working in F14? I have nouveau blacklisted in modprobe.d and in grub...
it's my understanding, from reading through the forum, that support for older nVidia cards is not included with the official nVidia Kernel Module (kmod-nvidia : RPM Fusion) from what i can tell... it is recommended that users with these cards try the 'nouveau' driver, not used by default in F12 ('nv' is default)... to obtain reasonable functionality.
i'm also under the impression that you need to specify the 'nouveau' driver manually in the xorg.conf... and that an xorg.conf needs to be generated, because F12 does not generate one upon setup. what i'm hoping is to get the nod from experienced users here that my impressions on this are correct.
I've managed to get dual monitor support working, but it seems a little sub-standard.
- I can't find how to alter the relative y offsets of each screen
- I can't drag windows from one side to the other
I am thinking of buying a Lenovo IdeaPad Z360, it has a GeForce G 310M.
I can't find much info on Linux support but an Ubuntu thread seems to suggest it isn't good. Can someone confirm that this card works with the latest nVidia drivers on Linux (Arch in particular)? It'd be even better if you had the Ideapad Z360 and could report on any other hardware problems I might have?
NVidia seems to say they have support (listed without the G however), but I've heard conflicting reports and so would like to check.
EDIT: I also found these:
[url]
[url]
Does the Z360 have optimus and the Z560 not so? I can't detect that either of them have it but occasionaly, someone says that they do. Can anyone confirm this? I thought the only real difference was the screen size.
using U10.04, i upgraded from 9.04, now keyboard or mouse wont work. using a laptop, ect
View 9 Replies View Relatedwhere do i find out the latest news and tech info about support in debian for nvidia cards on the ppc64 platform? i have lenny installed on a g5 single 1.8 ppc64 mac and am experiencing problems viewing output from videos that i believe are related to video support or rather lack there of.
View 2 Replies View RelatedI have recently been using Fedora, which is awesome, But I have a question, how come I do not have acceleration support with my GPU (Nvidia 9500 m gs), is it not compatible with it? Do I need a special driver?
View 1 Replies View RelatedI recently bought a sony vaio laptop, with nVidia GeForce 310M device.
I am new, and not very good with ubuntu. I downloaded a driver version 185, and installed, after installing which, I could not get any display at all. After trying to repair, in vain, I had to reinnstall the whole system.
I really need the correct drivers. I can see a version 190.42 of nvidia drivers, but that doesnt list my device model number, and so im not sure, whether this should work. Someone, also please tell me how do I repair, if I mess while trying this driver out?
Doing some research I found that in conky 1.8.1 there is support for nvidia using libxnvctrl. I am trying to compile it but I am missing libxnvctrl. Does any body know where I can get it?
View 5 Replies View RelatedMy laptop doesnt support USB booting, has no optical drives but does have an FDD.If copy the install folder onto a USB drive, boot from a floppy and load USB drivers for the drive, can I then install from there without issue?
View 2 Replies View RelatedMy friend just recently gave me an Nvidea Geforce 4 64mb, and it is supposed to be better than my ATI x700 Pro. I was wondering if there was openGL support for this card, and how do i replace it with my ATI card?
View 1 Replies View Related