Fedora :: Could Someone Clarify Vintage NVidia Support?

Apr 7, 2010

it's my understanding, from reading through the forum, that support for older nVidia cards is not included with the official nVidia Kernel Module (kmod-nvidia : RPM Fusion) from what i can tell... it is recommended that users with these cards try the 'nouveau' driver, not used by default in F12 ('nv' is default)... to obtain reasonable functionality.

i'm also under the impression that you need to specify the 'nouveau' driver manually in the xorg.conf... and that an xorg.conf needs to be generated, because F12 does not generate one upon setup. what i'm hoping is to get the nod from experienced users here that my impressions on this are correct.

View 3 Replies


ADVERTISEMENT

Fedora Hardware :: F14 3D Support For Nvidia?

Nov 26, 2010

I finishing a install of F14 (i386) on a Laptop with the Nvidia fx 5650 gpu I installed the drivers from the Nvidia site. BUt when trying to set up Desktop effects, I get a Accelerated 3D graphics is not available.

I had effects working in F11 so wondering wjhat I may need to do to get 3d working in F14? I have nouveau blacklisted in modprobe.d and in grub...

View 5 Replies View Related

Fedora Hardware :: 13 Nvidia 9500m Gs No 3d Account - Support

Aug 16, 2010

I have recently been using Fedora, which is awesome, But I have a question, how come I do not have acceleration support with my GPU (Nvidia 9500 m gs), is it not compatible with it? Do I need a special driver?

View 1 Replies View Related

Fedora Hardware :: Nvidia Developer Driver With CUDA Support?

Sep 29, 2010

I apologize if this is a duplicate post but I was unable to find anything that addressed my question. Currently I've installed the nvidia developer driver (beta) found here:[URL]..

After installing the driver everything works correctly. Rebooting the system results in a hang prior to starting X. Opening a new console and running start X provides me with the following error:

Code:
[ 103.884]
X.Org X Server 1.8.2
Release Date: 2010-07-01
[ 103.885] X Protocol Version 11, Revision 0
[ 103.885] Build Operating System: x86-10 2.6.32-44.el6.x86_64

[Code]..;.

At this point if I reinstall the driver and reissue startx, again the system starts up properly. Also I've noticed that after a reboot, my xorg.conf file is being overwrriten.

View 1 Replies View Related

Fedora Hardware :: Nvidia Geforce 4 - OpenGL Support For ATI Card?

Nov 12, 2010

My friend just recently gave me an Nvidea Geforce 4 64mb, and it is supposed to be better than my ATI x700 Pro. I was wondering if there was openGL support for this card, and how do i replace it with my ATI card?

View 1 Replies View Related

Fedora Hardware :: Nvidia GeForce 310/GT218 Fan Control Support?

Dec 18, 2010

I am running a FC14 x64 on a desktop which has a nvidia GeForce310 aka GT218 card which is being supported by the in kernel nouveau driver.

The kernel/syslog reports:

Code:

When Fedora 14 boots, I can hear the nvidia GPU fan spin up to its max rate.

With Windows on this same machine, the same fan starts at the same rate but drops to a lower (and less noisy rate) so we know there is graphics card supports fan control.

Does anyone know if its possible to set the nvidia's fan speed via the nouveau (or other) driver/util?

I have looked at nvclock (0.8b4 being the most recent I could find) but running this reports that the card isn't supported, although it reportedly supports the NV5x backend.

View 2 Replies View Related

OpenSUSE Hardware :: NVIDIA GeForce GT 325M And NVIDIA Optimus Support?

Apr 3, 2011

I own an ASUS N61JV-X2 notebook PC that has an Intel HD IGP, nVIDIA GeForce GT 325M GPU, and nVIDIA Optimus technology. I am running OpenSUSE 11.4 64 bit with GNOME. I used to be a former Ubuntu user. I used Ubuntu 10.10 Maverick Meerkat 64 bit. In Ubuntu, it was not recommended that I install the proprietary nVIDIA binary drivers because it would cause me to log into a TTY console upon reboot.

nVIDIA states that they have no plans to support Optimus technology in Linux at any time. Would it be recommended that I install the proprietary nVIDIA binary drivers in OpenSUSE 11.4 64 bit with GNOME? Will I get the same problem as in Ubuntu? How do I do this?

View 1 Replies View Related

Fedora Hardware :: Setup Nvidia On Geforce 5700LE - Monitor Doesn't Support Screen Resolution

May 13, 2010

First off, let me say: I'm a long time Linux hobbyist and recently installed Fedora 12. I've been looking (some say "lurking") around these forums for a bit after I loaded it up and let me say: Leigh, You're an amazing young man! Keep up the great work! I've a question: I've just put together a hobby computer: Pentuim 4, with 1 Gig of RAM and a Nvidia Geforce5700LE. When I install Fedora from a fresh install, everything works great: nice screen resolution, good graphics, etc. but no 3d or acceleration, so I'm very limited on my programs.

So I decided I need to upgrade my Nvidia driver. I followed Leigh's Nvidia setup guide after installing Fedora 12 (all four steps!) everything seemed to go fine, but when I reboot, I quickly see the Nvidia splash screen, but the screen then goes blank. Well, not really blank, I can see what appears to be a kind of cross-hatch pattern, plus I can see what should be my mouse cursor on screen (it also is a square shaped pattern). I suspect it may be at a screen resolution that my monitor doesn't support. Once there, the computer pretty much doesn't do anything else. Usually I can break into the x driver loading and go to the command prompt, but this latest time I can't even do that.

View 10 Replies View Related

Ubuntu :: Version For Dell Inspiron 7000 (vintage 2000-2001)?

Aug 3, 2010

What is the best distro of ubuntu to install on a Dell Inspiron 7000 notebook circa 2000-2001?

View 3 Replies View Related

General :: ATI Vs NVIDIA - Support ?

Mar 14, 2011

I've been doing some looking around on the general issues of ATI vs. NVIDIA for linux. I'm buying a new laptop, and obviously want to maximize linux compatibility.

Here's what I've understood so far. For the people who know: is my understanding right?

ATI has open source drivers, but they're kind of spotty. Also, ATI relies on the vendors to provide drivers, so if the company selling the laptop doesn't provide linux drivers, you're out of luck.

NVIDIA doesn't have open source drivers, but their closed source drivers provide good linux support. They provide drivers directly, rather than relying on the laptop vendor, so chances of linux support are better.

Anybody else have experience/knowledge in this area? I'm looking to do things like 3D gaming, video editing, playing back HD online video, possibly even some graphics rendering if I decide to pick that up...

Most of the laptops I'm looking at either have the NVIDIA GT425M or the ATI HD5730.

View 1 Replies View Related

Ubuntu :: Dual Monitor Support With NVidia ?

May 8, 2010

I've managed to get dual monitor support working, but it seems a little sub-standard.

- I can't find how to alter the relative y offsets of each screen
- I can't drag windows from one side to the other

View 3 Replies View Related

General :: Nvidia To Drop Support For The 'nv' Driver?

Mar 27, 2010

It would appear Nvidia are to drop support for the 'nv' driver,recommending using the Vesa driver instead until you install their proprietary driver.Read the article here:

View 14 Replies View Related

Hardware :: NVidia GeForce G 310M Support ?

Feb 13, 2011

I am thinking of buying a Lenovo IdeaPad Z360, it has a GeForce G 310M.

I can't find much info on Linux support but an Ubuntu thread seems to suggest it isn't good. Can someone confirm that this card works with the latest nVidia drivers on Linux (Arch in particular)? It'd be even better if you had the Ideapad Z360 and could report on any other hardware problems I might have?

NVidia seems to say they have support (listed without the G however), but I've heard conflicting reports and so would like to check.

EDIT: I also found these:

[url]

[url]

Does the Z360 have optimus and the Z560 not so? I can't detect that either of them have it but occasionaly, someone says that they do. Can anyone confirm this? I thought the only real difference was the screen size.

View 5 Replies View Related

Software :: Driver Support For ATI - NVIDIA On A Laptop

Dec 14, 2010

I am looking at purchasing a laptop (HP EliteBook Mobile Workstation), but I am not sure whether to buy one with ATI or NVIDIA graphics. My only real concern for graphics is driver support. Which has better support?

BTW, I dont know if this is important, but I will be installing Fedora linux. 12 or higher.

View 6 Replies View Related

Debian Hardware :: NVidia Support For PPC64 On Lenny

Jan 19, 2010

where do i find out the latest news and tech info about support in debian for nvidia cards on the ppc64 platform? i have lenny installed on a g5 single 1.8 ppc64 mac and am experiencing problems viewing output from videos that i believe are related to video support or rather lack there of.

View 2 Replies View Related

Ubuntu Installation :: NVidia GeForce 310M Support

Jan 28, 2010

I recently bought a sony vaio laptop, with nVidia GeForce 310M device.

I am new, and not very good with ubuntu. I downloaded a driver version 185, and installed, after installing which, I could not get any display at all. After trying to repair, in vain, I had to reinnstall the whole system.

I really need the correct drivers. I can see a version 190.42 of nvidia drivers, but that doesnt list my device model number, and so im not sure, whether this should work. Someone, also please tell me how do I repair, if I mess while trying this driver out?

View 9 Replies View Related

Slackware :: Conky With NVidia Support - Libxnvctrl Missing

Jan 8, 2011

Doing some research I found that in conky 1.8.1 there is support for nvidia using libxnvctrl. I am trying to compile it but I am missing libxnvctrl. Does any body know where I can get it?

View 5 Replies View Related

OpenSUSE Hardware :: NVidia Drivers Do Not Support Correct Display Resolution

May 31, 2010

I am new to opensuse and have installed 11.2 KDE. It is simply perfect for my system. However after the initial setup the display resolution was set perfectly fine for my 18.5" LED monitor, default resolution was 1366x768, and everything looked good from desktop to fonts but the OSS drivers didn't support compositing so I decided to switch to nvidia drivers. I installed the driver as shown in openSUSE repositories page, for my 6600GT card. Now after rebooting everything is stretched,even the fonts look really ugly and fuzzy.

I am unable to find any mode in Nvidia XServer settings that would correct the current ugly stretched display. I am unable to set 1366x768 manually as well, doing so my PC won't boot to KDM but rather sticks to console. Now it's for sure that my monitor and display card supports 1366x768 resolution but it's just that nvidia drivers/Nvidia XServer settings won't let me set that resolution. How can I set the resolution or even better if I can enable compositing using OSS drivers then that would be great an dm willing to switch back.

View 9 Replies View Related

Ubuntu Multimedia :: Getting Dual Monitor Support Working In Unity With NVIDIA?

Jun 21, 2011

I have an NVIDIA 9800 GTX. I have 2 DELL monitors connect to this card, one is a 24" and the other is 21".

I am unable to use Xinerama mode with Unity, because for some reason after logging in, I get no desktop interface, only background wallpaper, and I have to force reboot.

How can I setup dual monitors in Ubuntu using Unity properly? Note that I do NOT want to use TwinView, since this results in dead space around the smaller monitor.

View 7 Replies View Related

OpenSUSE Multimedia :: Install A Kernel Patch To Support On-board NVidia Graphics?

Mar 22, 2011

I am impressed with 11.4 and am happy that for the first time ever I don't need to install a kernel patch to support my on-board nVidia graphics. However, the on-board sound no longer works now. I don't know how to set it up in phonon. My device number 0 in phonon is MCP72XE/MCP72P/MCP78U/MCP78S high definition audio, and I assume this is my nVidia on-board sound card. The driver information states snd-hda-intel.

How can I check what is wrong with it? It did work fine on 11.2 right up to the 11.4 installation. I do get system sounds (like the start-up and shut-down sounds), but nothing from any application, e.g., firefox playing a video. Based on the advice from another thread I tried: speaker-test -c2 -l5 -twav This does not produce any sound, but gives the following information: speaker-test 1.0.24.2

Playback device is default
Stream parameters are 48000Hz, S16_LE, 2 channels
WAV file(s)
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 96 to 1048576
Period size range from 32 to 349526
Using max buffer size 1048576

[Code]...

View 9 Replies View Related

General :: Download Gallium With Dx10/11 Support For Ubuntu That Work With Nvidia GTX 460 Card

Apr 30, 2011

Im just curious if theres a place were you can download Gallium with dx10/11 support for ubuntu that will work with an nvidia GTX 460 card. and abit of an explanation on what gallium actually is, im unsure if its a graphics driver or program.

View 1 Replies View Related

Software :: Get Ubuntu To Utilize OpenGl Support For Nvidia 8800 GTS Video Card

Feb 21, 2009

I have downloaded latest Nvidia drivers but am not having much luck getting .run to install properly. How do I go about this?

View 2 Replies View Related

Fedora :: Can't Find Kmod Nvidia Installer - Quote: Su -c 'sh NVIDIA-Linux-x86-XYZ.AB.pkg1.run'

Jan 7, 2010

I can't find kmod so I'll go for the Nvidia installer from [URL]. I tried to run it Quote: su -c 'sh NVIDIA-Linux-x86-XYZ.AB.pkg1.run' but it wants me to kill xserver. How can I do that? " gdm stop" will kill Xserver too? How will I start it again?

View 3 Replies View Related

Ubuntu Multimedia :: NVIDIA GeForce 8200M Ubuntu Drivers/Support

Jul 16, 2010

I installed Nvidia xorg drivers (not knowing it didn't support my card) and messed up my video setup. When I rebooted it wanted me to restore to default, so I did. Now that I have, I can do stuff, but I am trying to run some games in W.I.N.E. and it just won't run. I can't activate desktop-effects either. And to be honest, I can't find any information on the NVIDIA GeForce 8200M, I can only find info and support for 8200 and the 8200M G. otherwise I'll just have to reinstall.... And I just installed 10.04 yesterday.

View 1 Replies View Related

Fedora :: Installing Kmod-nvidia And Xorg-x11-drv-nvidia-libs.i686

Jan 22, 2010

I installed Fedora 12 nowdays and tried to install the driver as Leigh posted in here: [URL]...Well i had some depadency trouble by installing kmod-nvidia and xorg-x11-drv-nvidia-libs.i686. I enabled rpmfusion repo of course. I don't have anything isntalled just the base programs what fedora installs. I updated the kernel and installed kernel-devel aswell.

This is what i got:

Code:
[root@Nuclear pinter]# rpm -Uvh http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-stable.noarch.rpm
Retrieving http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm
Retrieving http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-stable.noarch.rpm
warning: /var/tmp/rpm-tmp.fNroQP: Header V3 DSA signature: NOKEY, key ID 49c8885a
warning: /var/tmp/rpm-tmp.zdIa6C: Header V3 DSA signature: NOKEY, key ID b1981b68

[Code]...

View 1 Replies View Related

Hardware :: NVIDIA 8800 GTS - Dual Boot Fedora 10 Does Not See The NVIDIA Driver

Feb 5, 2009

I am experiencing the following issue. After enabling SLI and PhysX in windows vista, my dual boot fedora 10 does not see the NVIDIA driver.

Doing: cat /proc/drivers/nvidia/0 I get? in the VGA bios for both cards.

I disabled both SLI and PhysX in vista, but the problem persists. I powerdown and unplugged the rig for several hours without results.

Here are my specs:

CPU: Intel Q9300
Board: MSI P7N Diamond
CARD0: EVGA Gforce 8800 GTS
CARD1: EVGA Gforce 8800 GTS
RAM : 4 Gbytes OCZ gold PC6400 (4 x 1 Gbytes)
PSU : Thermaltake SLI ready 850 W

It is important to mention that initially Fedora did see the cards and I was able to set up a dual monitor system. It right was after I enable SLI and PhysX and re-booting into Linux that the problem showed up.

I have seen this issue before in another machine with an ASUS board, but not until today I associated with the SLI setup. My guess is that there has to be something that the driver is enabling in the cards that messes up the interface between the nvidia.ko module and the kernel, but I don't know what may fix it. I need this system for some numerical calculations.

View 1 Replies View Related

Fedora :: Installed Kmod-nvidia Akmod-nvidia - Visual Lag

Nov 28, 2010

I Have just formatted to Fedora 14 64bit and installed kmod-nvidia akmod-nvidia and am experiencing visual lag. The lag did not occur before I installed the drivers, neither did it occur on Fedora 13 with drivers installed.

I have a priitty high spec pc with the nvidia 260 gtx.


just remove xorg-x11-drv-nvidia-libs-260.19.12-3.fc14.i686

so now:

View 1 Replies View Related

Fedora :: (EE) Jul 30 06:32:07 NVIDIA(0): Failed To Initialize The NVIDIA Kernel Module

Jul 30, 2010

I updated kernel and everything seemed ok, except HD-PVR is locking up and recording only two minutes of every show it records. So, I have gone back to my previous kernel, but it seems that X isn't starting:

Code:

(II) NVIDIA dlloader X Driver 195.36.31 Thu Jun 3 08:27:29 PDT 2010
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs

[code]....

Fatal server error:no screens found I had done a yum install kmod-nvidia for the newer kernel. I am thinking I need to get the kmod for the current kernel again (2.6.32.12-115.fc12.x86_64 #1 SMP Fri Apr 30 19:46:25 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux), but am not sure how that is done?

View 2 Replies View Related

General :: "nVidia Drivers Not Support"?

Sep 14, 2010

I am not able to download drivers for my nvidia GF 9400GT,I tried in nvidia website and it says:-We're sorry, the NVIDIA Smart Scan does not support your system at this time.Supported operating systems: Microsoft Windows 98, 98SE, ME, 2000, XP, 2003, Media Center, and Windows Vista.Supported browsers: Internet Explorer, Firefox & Netscape.=====is it nvidia hates linux flavors...

View 14 Replies View Related

Fedora :: Uninstall Nvidia Drivers (kmod-nvidia)?

Mar 12, 2010

I've tried to install nvidia drivers using this commands:

Quote:

yum install kmod-nvidia
yum install akmod-nvidia
yum install nvidia-xconfig

After rdblacklist=nouveau in grub it runs, but I am having several issues and therefore I would like to downgrade to nouveau or whatever I had running with basic fedora 12 installation.

My GPU is nvidia gtx 280:

Quote:

[root@localhost ~]# /sbin/lspci | grep VGA
01:00.0 VGA compatible controller: nVidia Corporation GT200 [GeForce GTX 280] (rev a1)

My kernel is:
2.6.32.9-70.fc12.i686

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved