I use Bluewhite64, a Slackware64 derivative. Next, I don't use KDE or GNOME. What free tools (command line ok) would do this job? Examples would be nice, too. Most of my HD recordings are approximately 7 GB.
View 12 RepliesI am using 10.10 on Hp pavillon PC. I cannot burn Dual layer pavillon it gives an error message and stops.
View 11 Replies View RelatedAm slowly parting company with MS Windows. I have been using this app to convert, burn, and then be able to play on most all DVD players, ConvertXtoDVD. Is there something I can use in Ubuntu that is fairly easy? Also would like something in Ubuntu to convert and burn to Dual Layer media and then play on standard DVD players.
View 1 Replies View RelatedK3B says that my drive supports DVD-R DL writing. K3B shows it only having 1 layer.dvd+rw-mediainfo shows
Code:
INQUIRY: [ATAPI ][DVD A DH16A6S ][YA16]
GET [CURRENT] CONFIGURATION:
[code]...
I can't burn dvds double layer at all. I managed to ruin 3 DVDs so far (DVD burner from fedora says an error unknown appeared and that burn failed. I tried with Gnomebaker and I got:
[Code]...
If you need more info, tell me what you need (also what command to use) and I will write it. I am wondering whether the problem is with the DVDs or if it's a hardware problem.
I need a program that I can use to burn multiple movies into one DVD, in windows I used DVD shrink. I need to reauthor them and put em in one DVD playable in DVD players. what Linux software may I use
View 1 Replies View RelatedI have 2 iso's that are movies that i need to burn into 1 disc. what can use to accomplish this? i try to use brasero but i can only do one.
View 5 Replies View RelatedHow do you burn encrypted dvd movies on ubuntu 10.10
View 6 Replies View RelatedI'm using Ubuntu 9.04 and I cant read dual layer DVD's. When I put the disk in it spins and makes clicking sound sometimes. It shows up in Places as "Myfiles". If i try to mount it it "DBus error org.gtk.Private.RemoteVolumeMonitor.Failed: An operation is already pending". If i try to eject "DBus error org.gtk.Private.RemoteVolumeMonitor.Failed: An operation is already pending".
View 1 Replies View RelatedWhat is a simple Dual Layer DVD burning for 32bit Gnome Ubuntu 9.10?
From what I hear Brasero doesn't support it yet. I have heard of GnomeBaker & k3b.
I want a good one that also has PPAs to add to the sources.list
My dvd burner manual speaks about 'dual-layer and/or double-layer' recording. Is there any difference between them?
View 2 Replies View RelatedI have downloaded both the 32 bit and the 64bit version of slackware, I have a dual layer dvd and I was thinking to put both versions on one dvd! I just want to be able to choose which one to install with a simple menu. How can I do this?
View 3 Replies View RelatedHaving some troubles with NEC AD5170A device - it can`t read any dual layer disks. First layer reading is ok, but when drive switching to second layer it stops and don`t read any data from disk. Media - licensed DVD video disks. Same drive in windows read everything. I try to update firmware, but it doesn`t.
[Code]....
im trying to send pages of 4096 bytes from kernel layer of server to kernel layer of client over a network. previously i tried the foll. code , for data less than a 100 bytes it worked fine , but for something larger than that the computer hangs......(even the dmesg's wont say why) i also wanted to know how we could use the 'sendpage' function to solve this problem.
Code:
CLIENT'S KERNEL MODULE
struct iovec iov;
char buf[1024];
[code].....
seen this or have suggestions on how to fix this. I can read the original disks but I cannot read the backup. The backup disc was burned on Window$ using Nero.I am trying to read the disc using both VLC and Totem but you can see in /var/log/messages there is an issue with reading the disc. This disc is readable in the Window$ box and on all DVD stand alone players.
Feb 21 20:17:09 delltop kernel: [40761.304725] sr 0:0:1:0: [sr0] Unhandled sense code
Feb 21 20:17:09 delltop kernel: [40761.304752] sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[code]...
I recently got a signal conversion box so I could route my netbooks monitor-out port to my TV. The idea being that I could effectively set the TV up as a separate monitor for watching movies on whilst I worked using the netbooks own monitor. It seemed to work initially, the Monitors dialog box could easily detect and setup the TV as if it were just an external monitor however I can't seem to play any kind of video on either screen when this is set up. All I get in Totem, Mplayer, VLC and skype is just a black area within the applications window. The sound works fine so this is clearly just a video problem.
It only seems to occur when I configure the system to use the TV as a separate monitor. If I tell it to display the same thing on both monitors all video output works fine.
I'm trying to find a driver for this TV tuner USB dongle KW ATSC 340U. I used Yast TV Card application and it didn't have this one listed. I'm not the best at using terminal within linux, just got OpenSuse a few months ago. Is there perhaps another driver that Kworld has that is listed in Yast that could be used for this dongle?
View 9 Replies View RelatedI got the following error message from brasero-session.log when trying to burn a 7.7GB ISO. My system is openSUSE 11.4, Gnome 2.32.
Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1744)
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_get_action
[code]...
As far as I can tell, I have all the applicable applications and plugins (for this, Debian 5.0.6 installation). I type in Code:about:plugins in either iceweasel or epiphany browser and get a list that includes:
Code:
Installed plugins
Find more information about browser plugins at mozilla.org.
[code]...
I want to burn a mp3 cd but brasero can't burn mp3 cd. How can I do this. If any further software need burn mp3 cd
View 3 Replies View RelatedI am looking for a layer 7 firewall. I have to redirect rtmp requests for different hostnames coming at a gateway to internal servers at LAN at their respective hostnames.
Code:
IPTABLES some stuff -p rtmp -hostname to server 1
like that.
Or if not IPTABLES then some other feasible solution.
Since Okular highlights and annotates on a layer over the pdf, how can I seperate that layer from the pdf?
View 10 Replies View RelatedI am trying to find out how I can estimate the IP Layer bitrate I would get from an ethernet link? Say at 100 Mbits/s or 200 Mbits/s (powerline)? Is there a formula that I could use to calculate that?
View 2 Replies View RelatedIm new to Fedora and im already loving it. I only have one problem and that is that I can't play mp3 files. I use Rhythmbox 0.13.1 and it starts but when I play a mp3, It says that in need a mpeg 1 layer 3 plugin. I already found a tutorial that says that i need to install these.
rhythmbox
gstreamer-plugins-ugly
gstreamer-plugins-bad
gstreamer-ffmpeg
Only when I try to install them this comes up:
No package gstreamer-plugins-ugly available.
Error: Nothing to do
I often want to move several layers in the GIMP at the same time. I can't however select more than one at the same time. Is it somehow possible to move several layers simultaneously in the GIMP?
View 1 Replies View Relatedfind . -type f -name "*" -print0 | xargs -0 --replace=% mv % `pwd`
works fine at moving all files anywhere below the current directory to the current directory.
My question is can it be modified so it only moves all the files up one directory layer? Otherwise I shall have to cd 100 or so times and run it in each directory i want to compress...
I imagine the directory below which the file is stored is in the % somewhere it is just a case of extracting it and applying it to the mv command, yes?
I want to write a new protocol on transport layer. These are the features that new protocol should include:
-Real time
-Concurrent transfer
-Multipath and Multihoming
the reason why i should write this protocol is in order to transport encoded video stream over 3G link. When i investigated TCP UDP or SCTP source codes, i couldnot understand them at all. What ı want is to help me about steps of the protocol writing or guideline about it. How should i start, is there any book or source about it (i couldnot find over my internet research).
I issued the command 'mkisofs -dvd-video wss.iso ./juan', where the dvd-video files in ./juan/VIDEO_TS made a total of 7.5GB. Later on I'll use the image to burn a double layer dvd. But mkisofs, after working up to the middle of the process, said: 'File size limit exceeded'. I don't want to burn on the fly and therefore
View 1 Replies View RelatedI want to implement a cross layer approach. I want to pass the network information such as delay from the MAC layer to Network layer. Can you tell me the way I am new to this. I am using linux (fedora). I think some system call will do the trick. Correct me if I am wrong. (I want to implement QoS matrices)
View 1 Replies View RelatedI've downloaded some files from the Internet Archive. They come in different file formats and most of the time I use pdf. However, sometimes the scans are saves in colour instead of b/w. This makes it difficult/impossible to read on a dedicated ebook reader. In that case I downloaded the djvu files as on the PC you can select which layer (color, bw,fore,back) one would like to see. Selecting the bw gives excellent results. However, the ebook reader does not has this option.
The question is, how can I remove /extract a layer from the djvu file and save only this layer.
So far I've tried the following two approaches:
1) select bw in the djvu viewer on the PC and printed to postscript file. Followed by a ps2pdf conversion. This works, but generates a fairly large pdf file. Sure, I can again upload it to any2djvu but it just seems to much manual work for each file.
2) I tried the shared annotation feature and said (mode bw). This works on the PC as desired but is ignored on the ebook reader as the other layers are still present.