Software :: Separate That Layer From Pdf?
Mar 1, 2011Since Okular highlights and annotates on a layer over the pdf, how can I seperate that layer from the pdf?
View 10 Replies
ADVERTISEMENT
Kernel :: Send Pages Of 4096 Bytes From Layer Of Server To Layer Of Client Over A Network?
Jan 13, 2010im trying to send pages of 4096 bytes from kernel layer of server to kernel layer of client over a network. previously i tried the foll. code , for data less than a 100 bytes it worked fine , but for something larger than that the computer hangs......(even the dmesg's wont say why) i also wanted to know how we could use the 'sendpage' function to solve this problem.
Code:
CLIENT'S KERNEL MODULE
struct iovec iov;
char buf[1024];
[code].....
OpenSUSE Multimedia :: K3B - Dual Layer DVD Detected As Single Layer?
Aug 8, 2010K3B says that my drive supports DVD-R DL writing. K3B shows it only having 1 layer.dvd+rw-mediainfo shows
Code:
INQUIRY: [ATAPI ][DVD A DH16A6S ][YA16]
GET [CURRENT] CONFIGURATION:
[code]...
Server :: Which Layer 7 Firewall Should Be Tried
Aug 9, 2010I am looking for a layer 7 firewall. I have to redirect rtmp requests for different hostnames coming at a gateway to internal servers at LAN at their respective hostnames.
Code:
IPTABLES some stuff -p rtmp -hostname to server 1
like that.
Or if not IPTABLES then some other feasible solution.
Hardware :: Cannot Read Dual Layer DVD's?
May 4, 2010I'm using Ubuntu 9.04 and I cant read dual layer DVD's. When I put the disk in it spins and makes clicking sound sometimes. It shows up in Places as "Myfiles". If i try to mount it it "DBus error org.gtk.Private.RemoteVolumeMonitor.Failed: An operation is already pending". If i try to eject "DBus error org.gtk.Private.RemoteVolumeMonitor.Failed: An operation is already pending".
View 1 Replies View RelatedNetworking :: How To Estimate IP Layer Bitrate
Feb 2, 2011I am trying to find out how I can estimate the IP Layer bitrate I would get from an ethernet link? Say at 100 Mbits/s or 200 Mbits/s (powerline)? Is there a formula that I could use to calculate that?
View 2 Replies View RelatedFedora :: Can't Play Mp3 - Says That In Need A Mpeg 1 Layer 3 Plugin
Oct 5, 2010Im new to Fedora and im already loving it. I only have one problem and that is that I can't play mp3 files. I use Rhythmbox 0.13.1 and it starts but when I play a mp3, It says that in need a mpeg 1 layer 3 plugin. I already found a tutorial that says that i need to install these.
rhythmbox
gstreamer-plugins-ugly
gstreamer-plugins-bad
gstreamer-ffmpeg
Only when I try to install them this comes up:
No package gstreamer-plugins-ugly available.
Error: Nothing to do
Ubuntu :: Burning Dual Layer DVDs?
Jan 15, 2010What is a simple Dual Layer DVD burning for 32bit Gnome Ubuntu 9.10?
From what I hear Brasero doesn't support it yet. I have heard of GnomeBaker & k3b.
I want a good one that also has PPAs to add to the sources.list
Ubuntu Multimedia :: Move More Than One Layer In The GIMP?
Sep 3, 2010I often want to move several layers in the GIMP at the same time. I can't however select more than one at the same time. Is it somehow possible to move several layers simultaneously in the GIMP?
View 1 Replies View RelatedProgramming :: Moving Files Up A Directory Layer?
Jan 3, 2011find . -type f -name "*" -print0 | xargs -0 --replace=% mv % `pwd`
works fine at moving all files anywhere below the current directory to the current directory.
My question is can it be modified so it only moves all the files up one directory layer? Otherwise I shall have to cd 100 or so times and run it in each directory i want to compress...
I imagine the directory below which the file is stored is in the % somewhere it is just a case of extracting it and applying it to the mv command, yes?
Networking :: Write A New Protocol On Transport Layer
Jul 23, 2010I want to write a new protocol on transport layer. These are the features that new protocol should include:
-Real time
-Concurrent transfer
-Multipath and Multihoming
the reason why i should write this protocol is in order to transport encoded video stream over 3G link. When i investigated TCP UDP or SCTP source codes, i couldnot understand them at all. What ı want is to help me about steps of the protocol writing or guideline about it. How should i start, is there any book or source about it (i couldnot find over my internet research).
General :: Unable To Burn Dual Layer DVD
Jul 27, 2010I am using 10.10 on Hp pavillon PC. I cannot burn Dual layer pavillon it gives an error message and stops.
View 11 Replies View RelatedSoftware :: Premastering For Double Layer DVD Recording?
Mar 4, 2010I issued the command 'mkisofs -dvd-video wss.iso ./juan', where the dvd-video files in ./juan/VIDEO_TS made a total of 7.5GB. Later on I'll use the image to burn a double layer dvd. But mkisofs, after working up to the middle of the process, said: 'File size limit exceeded'. I don't want to burn on the fly and therefore
View 1 Replies View RelatedProgramming :: Passing Info From Mac To Network Layer
Dec 30, 2008I want to implement a cross layer approach. I want to pass the network information such as delay from the MAC layer to Network layer. Can you tell me the way I am new to this. I am using linux (fedora). I think some system call will do the trick. Correct me if I am wrong. (I want to implement QoS matrices)
View 1 Replies View RelatedFedora Hardware :: DVD Double Layer Burn Fails?
May 13, 2011I can't burn dvds double layer at all. I managed to ruin 3 DVDs so far (DVD burner from fedora says an error unknown appeared and that burn failed. I tried with Gnomebaker and I got:
[Code]...
If you need more info, tell me what you need (also what command to use) and I will write it. I am wondering whether the problem is with the DVDs or if it's a hardware problem.
General :: Remove Background Layer Of Djvu File?
Jan 11, 2011I've downloaded some files from the Internet Archive. They come in different file formats and most of the time I use pdf. However, sometimes the scans are saves in colour instead of b/w. This makes it difficult/impossible to read on a dedicated ebook reader. In that case I downloaded the djvu files as on the PC you can select which layer (color, bw,fore,back) one would like to see. Selecting the bw gives excellent results. However, the ebook reader does not has this option.
The question is, how can I remove /extract a layer from the djvu file and save only this layer.
So far I've tried the following two approaches:
1) select bw in the djvu viewer on the PC and printed to postscript file. Followed by a ps2pdf conversion. This works, but generates a fairly large pdf file. Sure, I can again upload it to any2djvu but it just seems to much manual work for each file.
2) I tried the shared annotation feature and said (mode bw). This works on the PC as desired but is ignored on the ebook reader as the other layers are still present.
Ubuntu :: Setting Up Conky In Compiz's Widget Layer?
May 9, 2010How do I set up conky in compiz's widget layer?
I know I have to set up the rule under Widget Layer > Behaviour > Widget Windows but i have not been able to identify the correct rule.
Ubuntu :: After Installing 10.10 Widget Layer In Compiz Is Missing?
Oct 16, 2010I backed everything up and did a complete re-install of the system to 10.10. I had a widget layer with compiz before I did this and now it is not even an option in the preferences. Am I missing something?
I was running 10.10 before as well and it was there.
Ubuntu :: Put Multiple Windows Inside The Widget Layer?
Dec 11, 2010I would like to put both Tomboy and Gwibber inside the widget layer, but so far I've only managed to add one or the other, I can add one by putting:
Code:
name=gwibber
into the "window match" box but how can I add another?
Hardware :: Difference Between Dual And Double Layer Recording
Feb 24, 2010My dvd burner manual speaks about 'dual-layer and/or double-layer' recording. Is there any difference between them?
View 2 Replies View RelatedNetworking :: IP Layer Link Aggregation Without Switch Support
Sep 2, 2010I'm looking for a way (kernel patches, configuration, etc) to bond multiple network interfaces together but for limited purposes. Here's the setup. Machines A, B, C, and D each have 4 NICs, each of which are on separate unmanaged switches. The connections are made in a corresponding way. e.g. eth0 of each machine are connected via switch 0, eth1 are connected via switch 1, etc. There are also other machines which have only one NIC and are connected to switch 0 only. All NICs for A/B/C/D and the switches are gigabit speed. The remaining machines have a low traffic level. Machines A/B/C/D need the extended bandwidth. And this bandwidth need usually involves only one connection at a time.
E.g. machine A transferring files to machine C with no other traffic going on. The speed need is to cut the transfer times from several hours to few hours (such as 8 hours to 2 hours). Transfers of up to a few terabytes at a time are involved. IEEE 802.1AX won't accomplish this. It requires special support from a single switch that all connection go to (raising costs and reducing reliability). Also, from technical details of 802.1AX, it appears that a decision process is made for which traffic goes over which physical link based on destination information. It's unclear what impact this will have, but it looks like at least a single TCP connection cannot use all physical links.
And possibly all traffic from host A to host B is limited to a physical link (not any better than a round robin of crossover cables). What I am looking for is something that works entirely on an end-to-end basis within a LAN. If it works at the link layer, that could be OK as long as it doesn't have the limitations of 802.1AX. Working at the IP layer would be OK, too (as I can already envision the logic of how to make that work). This might be an experimental patch to the Linux kernel if anyone has tried it. I have not dug into kernel source to see what might be in there, yet, but will eventually do that if there isn't a patch already available.
Networking :: Layer 2 Switch For Token Ring And Ethernet
Mar 9, 2011Can both token ring and ethernet be connected to same switch? If we can connect so, how can a switch able to differentiate them.
View 1 Replies View RelatedNetworking :: Layer 2 Switch - VLAN Router To Network
May 15, 2009Our ISP provides us with Layer 2 hardware (Modem?/Switch? (Hatteras)) for our leased line and internet access. I have been told that I should set up a VLAN capable router to separate the internet traffic from the internal traffic. I found that linux is capable of VLAN routing. Nice!
I have setup opensuse 10.3 put in two NICs and did the following
vconfig add eth0 10
vconfig add eth0 20
ifconfig public.ip.add.ress netmask 255.255.255.252 eth0.10 up
ifconfig 192.168.0.1 netmask 255.255.255.0 eth0.20 up
Plugged this NIC into the HATTERAS hardware (with a straight cable), and thought that this way I should be able to ping the public gateway or any ip out on the internet. My ISP is telling me that I should create a VLAN trunk to be able to 'use the internet', but as I understand in linux if I create any number of VLANs on one NIC they are already trunked. I also got the info, that the traffic is tagged, and I can separate the traffic reading the tags. I already read that some NICs are not able to VLAN because they are not able to handle the increased packet size.
Also that the MTU setting is important (dono' the exact value though, only that its important). I thought that a linux machine can act as a router and firewall in such a case, because proprietary switches/routers use linux as embedded os. This is my first meeting with VLAN so if this whole post does not make any sense or you think that I just need to RTFM more then tell me! I also have some (3) Dlink 3226 Layer2 switches around, but I think it would be waste to use a 24 port switch on this subject.
Software :: Burn HD (ATSC) Movies To DVD (Dual Layer)
May 4, 2010I use Bluewhite64, a Slackware64 derivative. Next, I don't use KDE or GNOME. What free tools (command line ok) would do this job? Examples would be nice, too. Most of my HD recordings are approximately 7 GB.
View 12 Replies View RelatedSlackware :: Using Dual Layer DVD As Bootable Disk For Two Versions?
Nov 8, 2010I have downloaded both the 32 bit and the 64bit version of slackware, I have a dual layer dvd and I was thinking to put both versions on one dvd! I just want to be able to choose which one to install with a simple menu. How can I do this?
View 3 Replies View RelatedCentOS 5 Networking :: How To Install The Link Layer Topology
Jan 11, 2010I was wondering how to install the Link Layer Topology on CentOS 5. I have installed the lld2d daemon from a Debian how to after compiling it. It seems to be running but it is not talking to the Windows 7 network mapping.
View 2 Replies View RelatedUbuntu Multimedia :: Synfig - Everything Invisible On Creating New Layer Or Shape
Apr 3, 2010I've been interested in Synfig for a while. In the last version of Ubuntu, there were some problems so I couldn't install it. Yesterday I remembered the program and decided to try it on 9.10. I was amazed, it installed fine and everything worked just how it should. Then later last night, I must have done something because everything turned invisible and when I created a new layer or shape, nothing new appeared.
I fiddled with it for a while and then reinstalled the program a total of like 3 times just in case that would help. Then, I went straight to the Synfig site and downloaded the newest version. It looked better, different, but it behaved exactly the same. I'm very confused and I would like to use Synfig, it seems amazing. I assume there's some little thing I missed or something I pressed that I shouldn't have. Here are screen shots of both versions.
Screenshot.jpg
Screenshot-1.jpg
Ubuntu :: Don't See An Option To Turn On The Widget Layer In The Compiz Settings In 10.01?
May 1, 2010In 9.10 I had compiz turned on, and had enabled the widget layer so I could hide the top & bottom panels (pressing F9 displays the widget layer).However I don't see an option to turn on the widget layer in the Compiz settings in 10.01?
View 1 Replies View RelatedUbuntu :: Software To Convert And Burn Dual Layer Media?
May 21, 2010Am slowly parting company with MS Windows. I have been using this app to convert, burn, and then be able to play on most all DVD players, ConvertXtoDVD. Is there something I can use in Ubuntu that is fairly easy? Also would like something in Ubuntu to convert and burn to Dual Layer media and then play on standard DVD players.
View 1 Replies View RelatedUbuntu Multimedia :: Flash Content Covered With Pink Layer
Mar 10, 2011I try to watch flash content but everything is covered with a pink layer... (see attachment file). I am using firefox 3.6.1.5 (same prob with opera!) and flash 1.0.2.r152 in ubuntu 10.10 with compiz disabled and GPU Override set to true (no difference with false..) I tried FlashAID for a clean setup and I have only flashplugin-installer on my laptop (no gnash or libswf...), I also tried it with the package "adobe-flashplugin" same problem. This and the a2dp-skips are my last problems before a perfect setup.
View 9 Replies View Related