I'm using Ubuntu 9.04 and I cant read dual layer DVD's. When I put the disk in it spins and makes clicking sound sometimes. It shows up in Places as "Myfiles". If i try to mount it it "DBus error org.gtk.Private.RemoteVolumeMonitor.Failed: An operation is already pending". If i try to eject "DBus error org.gtk.Private.RemoteVolumeMonitor.Failed: An operation is already pending".
View 1 Replies
Having some troubles with NEC AD5170A device - it can`t read any dual layer disks. First layer reading is ok, but when drive switching to second layer it stops and don`t read any data from disk. Media - licensed DVD video disks. Same drive in windows read everything. I try to update firmware, but it doesn`t.
[Code]....
seen this or have suggestions on how to fix this. I can read the original disks but I cannot read the backup. The backup disc was burned on Window$ using Nero.I am trying to read the disc using both VLC and Totem but you can see in /var/log/messages there is an issue with reading the disc. This disc is readable in the Window$ box and on all DVD stand alone players.
Feb 21 20:17:09 delltop kernel: [40761.304725] sr 0:0:1:0: [sr0] Unhandled sense code
Feb 21 20:17:09 delltop kernel: [40761.304752] sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[code]...
K3B says that my drive supports DVD-R DL writing. K3B shows it only having 1 layer.dvd+rw-mediainfo shows
Code:
INQUIRY: [ATAPI ][DVD A DH16A6S ][YA16]
GET [CURRENT] CONFIGURATION:
[code]...
What is a simple Dual Layer DVD burning for 32bit Gnome Ubuntu 9.10?
From what I hear Brasero doesn't support it yet. I have heard of GnomeBaker & k3b.
I want a good one that also has PPAs to add to the sources.list
I am using 10.10 on Hp pavillon PC. I cannot burn Dual layer pavillon it gives an error message and stops.
View 11 Replies View RelatedMy dvd burner manual speaks about 'dual-layer and/or double-layer' recording. Is there any difference between them?
View 2 Replies View RelatedI use Bluewhite64, a Slackware64 derivative. Next, I don't use KDE or GNOME. What free tools (command line ok) would do this job? Examples would be nice, too. Most of my HD recordings are approximately 7 GB.
View 12 Replies View RelatedI have downloaded both the 32 bit and the 64bit version of slackware, I have a dual layer dvd and I was thinking to put both versions on one dvd! I just want to be able to choose which one to install with a simple menu. How can I do this?
View 3 Replies View RelatedAm slowly parting company with MS Windows. I have been using this app to convert, burn, and then be able to play on most all DVD players, ConvertXtoDVD. Is there something I can use in Ubuntu that is fairly easy? Also would like something in Ubuntu to convert and burn to Dual Layer media and then play on standard DVD players.
View 1 Replies View Relatedim trying to send pages of 4096 bytes from kernel layer of server to kernel layer of client over a network. previously i tried the foll. code , for data less than a 100 bytes it worked fine , but for something larger than that the computer hangs......(even the dmesg's wont say why) i also wanted to know how we could use the 'sendpage' function to solve this problem.
Code:
CLIENT'S KERNEL MODULE
struct iovec iov;
char buf[1024];
[code].....
I am editing this post to save people time and effort. This is one of those "Pilot Error" issues or faulty readout issue, not sure which. It turns out that when I saved a document in PDF format to my NTFS Drive (the one I want to share between Windows XP and Ubuntu 10) the .PDF file extension was missing.
1. Ubuntu identified the files as a PDF document (even though the file extension was not there)
2. When trying to access it by double clicking it, the message was "Unable to open document, Permission Denied"
The problem was not permissions, and it was not a PDF file according to the default Document Viewer, but it WAS a PDF file according to the directory listing. The permissions message really had nothing to do with the problem, and identifying the file as a PDF document when it didn't have an extension, was another problem. What SHOULD have happened is a file without an extension should not be identified as a PDF file or If Ubuntu says it's a PDF file, and I double click it, why is the message "Permission Denied" ?? How about "No File Extension" or something like that?
Read the following if you want to see what my problem WAS before I just appended ,PDF to the filename, and now it works fine. On the positive side, installing XP first, then setting aside a large chunk of space for a shared NTFS drive, and THEN installing Ubuntu in the free space works fine. I installed a new 320 GB drive on laptop. Installed Win XP in 32 GB Set aside 250 GB for another Windows partition using MANAGE and formatted D: as an NTFS drive Then successfully Installed ubuntu 10 into remaining unused space. Problem: Ubuntu cannot access files from D: (NTFS Windows) partition. but it can WRITE files without problems, and create directories, just not read them. Have set properties of the Windows drive to shared, still nada. Any trick I'm missing? If I plug in an external USB drive, Ubuntu can read/write to it easily, it just can't read from the 250 GB partition formatted in Windows XP that I wanted to share between operating systems.
WinXP Partition loading as a read only and can't fix it with PYSDM (storage device manager) Let me provide some history as to how everything was installed: From my old WIN XP hard drive I used clonezilla to clone the drive to a partition on my new hard drive for Linux. Windows is on SDA4 which is the last partition of the drive, it is mounted at sda4/windows using ntfs. I then loaded Mint 8 gnome on the 2nd partition sda2 using ext3 mounted at /, sda1 is my Linux swap, and sda3 is mounted at /home using ext3. While installing I selected to mount Linux ext3 at /
When I choose to load winXP from the grub boot loader I get dev/sda4 no such device 10CDR36778638F73. Also when I try to unmount from disk utility I get the following error: Error unmounting: umount exited with exit code 1: helper failed with: umount: only root can unmount UUID=10CDF36778638F73 from /windows Seemslike I need to rename the drive but it won't let me in disk utility.
My Problem is that within PYSDM (storage device manager) I uncheck Mount file system (sda4/windows) as a read only but it will not stay unchecked. I have unchecked it hit unmount and mount and it still is checked to mount as a read only. This is the code in options for sda4 in PYSDM (storage device manager) nls=utf8,umask=007,gid=46
I dual booted xp home ed with ubuntu netbook remix10.4 and in the grub loader (i did side by side install) it shows xp at the bottom (after ubuntu, ubuntu recovery mode, memcheck64 , xp
All of the loaders work fine (ubuntu loads fine, im typing this from ubuntu.) but xp will just say: Disk Read Error. Press Ctrl+Alt+Del
One hard drive is partioned 500GB HD ([440gb XP partition] + [60gb ubuntu])
I have an older pc now dedicated to ubuntu and run 11.04 32-bit no problem, and previous versions as well. I just got new hardware and assembled it and wanted to make it dual boot with win7. Found the information and got it working so I thought. Everything was peaches and cream until the install finished. A long long message appeared with read errors from some drive (i think it was my swap partition but its just a guess), appearing and disappearing to fast to read, so it don't know what it was trying to tell me aside from "read error". After the the message it said remove media and restart now. Which I did, booted to windows, modified the BSD to boot to Ubuntu or windows, Get the grub2 loader and select ubuntu. This is when everything goes awry, I dont get any loading screen just a singular purple screen, if I press any key, it starts to flash, and every subsequent key I press cause it to flash faster.
I can run the livecd (64-bit 11.04) no problems, As well as win7-64 (currently to post this message). But i cant get Ubuntu to load. I deleted and reformatted the partitions I'm using and reinstalled with the same problem.(/boot,swap,/(root) and /home) under windows management they are listed as healthy(ext4 -- except for swap,primary -- except for swap as logical and all set to beginning). So I guess the question is what could be cause this problem? My settings for install, my bios, or something else? My system specs are Asus mobo, amd phenom2 hexcore, 4gigs ram, 2 ati radeon crossfired, a 2 tb hd and a 40 gig ssd.
I am looking for a layer 7 firewall. I have to redirect rtmp requests for different hostnames coming at a gateway to internal servers at LAN at their respective hostnames.
Code:
IPTABLES some stuff -p rtmp -hostname to server 1
like that.
Or if not IPTABLES then some other feasible solution.
Since Okular highlights and annotates on a layer over the pdf, how can I seperate that layer from the pdf?
View 10 Replies View RelatedI am trying to find out how I can estimate the IP Layer bitrate I would get from an ethernet link? Say at 100 Mbits/s or 200 Mbits/s (powerline)? Is there a formula that I could use to calculate that?
View 2 Replies View RelatedIm new to Fedora and im already loving it. I only have one problem and that is that I can't play mp3 files. I use Rhythmbox 0.13.1 and it starts but when I play a mp3, It says that in need a mpeg 1 layer 3 plugin. I already found a tutorial that says that i need to install these.
rhythmbox
gstreamer-plugins-ugly
gstreamer-plugins-bad
gstreamer-ffmpeg
Only when I try to install them this comes up:
No package gstreamer-plugins-ugly available.
Error: Nothing to do
I often want to move several layers in the GIMP at the same time. I can't however select more than one at the same time. Is it somehow possible to move several layers simultaneously in the GIMP?
View 1 Replies View Relatedfind . -type f -name "*" -print0 | xargs -0 --replace=% mv % `pwd`
works fine at moving all files anywhere below the current directory to the current directory.
My question is can it be modified so it only moves all the files up one directory layer? Otherwise I shall have to cd 100 or so times and run it in each directory i want to compress...
I imagine the directory below which the file is stored is in the % somewhere it is just a case of extracting it and applying it to the mv command, yes?
I want to write a new protocol on transport layer. These are the features that new protocol should include:
-Real time
-Concurrent transfer
-Multipath and Multihoming
the reason why i should write this protocol is in order to transport encoded video stream over 3G link. When i investigated TCP UDP or SCTP source codes, i couldnot understand them at all. What ı want is to help me about steps of the protocol writing or guideline about it. How should i start, is there any book or source about it (i couldnot find over my internet research).
I issued the command 'mkisofs -dvd-video wss.iso ./juan', where the dvd-video files in ./juan/VIDEO_TS made a total of 7.5GB. Later on I'll use the image to burn a double layer dvd. But mkisofs, after working up to the middle of the process, said: 'File size limit exceeded'. I don't want to burn on the fly and therefore
View 1 Replies View RelatedI want to implement a cross layer approach. I want to pass the network information such as delay from the MAC layer to Network layer. Can you tell me the way I am new to this. I am using linux (fedora). I think some system call will do the trick. Correct me if I am wrong. (I want to implement QoS matrices)
View 1 Replies View RelatedI can't burn dvds double layer at all. I managed to ruin 3 DVDs so far (DVD burner from fedora says an error unknown appeared and that burn failed. I tried with Gnomebaker and I got:
[Code]...
If you need more info, tell me what you need (also what command to use) and I will write it. I am wondering whether the problem is with the DVDs or if it's a hardware problem.
I've downloaded some files from the Internet Archive. They come in different file formats and most of the time I use pdf. However, sometimes the scans are saves in colour instead of b/w. This makes it difficult/impossible to read on a dedicated ebook reader. In that case I downloaded the djvu files as on the PC you can select which layer (color, bw,fore,back) one would like to see. Selecting the bw gives excellent results. However, the ebook reader does not has this option.
The question is, how can I remove /extract a layer from the djvu file and save only this layer.
So far I've tried the following two approaches:
1) select bw in the djvu viewer on the PC and printed to postscript file. Followed by a ps2pdf conversion. This works, but generates a fairly large pdf file. Sure, I can again upload it to any2djvu but it just seems to much manual work for each file.
2) I tried the shared annotation feature and said (mode bw). This works on the PC as desired but is ignored on the ebook reader as the other layers are still present.
How do I set up conky in compiz's widget layer?
I know I have to set up the rule under Widget Layer > Behaviour > Widget Windows but i have not been able to identify the correct rule.
I backed everything up and did a complete re-install of the system to 10.10. I had a widget layer with compiz before I did this and now it is not even an option in the preferences. Am I missing something?
I was running 10.10 before as well and it was there.
I would like to put both Tomboy and Gwibber inside the widget layer, but so far I've only managed to add one or the other, I can add one by putting:
Code:
name=gwibber
into the "window match" box but how can I add another?
I'm looking for a way (kernel patches, configuration, etc) to bond multiple network interfaces together but for limited purposes. Here's the setup. Machines A, B, C, and D each have 4 NICs, each of which are on separate unmanaged switches. The connections are made in a corresponding way. e.g. eth0 of each machine are connected via switch 0, eth1 are connected via switch 1, etc. There are also other machines which have only one NIC and are connected to switch 0 only. All NICs for A/B/C/D and the switches are gigabit speed. The remaining machines have a low traffic level. Machines A/B/C/D need the extended bandwidth. And this bandwidth need usually involves only one connection at a time.
E.g. machine A transferring files to machine C with no other traffic going on. The speed need is to cut the transfer times from several hours to few hours (such as 8 hours to 2 hours). Transfers of up to a few terabytes at a time are involved. IEEE 802.1AX won't accomplish this. It requires special support from a single switch that all connection go to (raising costs and reducing reliability). Also, from technical details of 802.1AX, it appears that a decision process is made for which traffic goes over which physical link based on destination information. It's unclear what impact this will have, but it looks like at least a single TCP connection cannot use all physical links.
And possibly all traffic from host A to host B is limited to a physical link (not any better than a round robin of crossover cables). What I am looking for is something that works entirely on an end-to-end basis within a LAN. If it works at the link layer, that could be OK as long as it doesn't have the limitations of 802.1AX. Working at the IP layer would be OK, too (as I can already envision the logic of how to make that work). This might be an experimental patch to the Linux kernel if anyone has tried it. I have not dug into kernel source to see what might be in there, yet, but will eventually do that if there isn't a patch already available.
