I'm trying to find a driver for this TV tuner USB dongle KW ATSC 340U. I used Yast TV Card application and it didn't have this one listed. I'm not the best at using terminal within linux, just got OpenSuse a few months ago. Is there perhaps another driver that Kworld has that is listed in Yast that could be used for this dongle?
View 9 Repliesim not getting anysound through my tv i have the driver for the graphics card wich was downloaded as a restricted driver.
my main display is my tv wich is plugged by HDMI, now i know its not windows so obv its not guna run anything windows related. by a freind who refferd me to linux said something about a wrapper wich means nothing to me as i am new to this, my other issue i have is i cant find a driver for my wireless dongle its a belkin n, if thats any help, i tried looking in obvious places like the manufactures site for the driver but i cant find any :S. i am having to use an old wirless card that only gets a 1 bar signal,
I've looked around and can't find a working tuner for Ubuntu, online ones don't work and the ones I've downloaded I can't seem to get to pick up a sound.
View 7 Replies View RelatedI have a TV tuner card with its output connected to the CD in of an integrated sound card. Video is OK, and the sound also gets thorough (to the line out) when running xawtv, for example. However, I found no ways yet for recording it.I'm running Ubuntu 10.10 with ALSA drivers. Pulseaudio was running in the beginning, now it doesn't, but it doesn't seem to make much difference.
capturing with VLC, using plughw:0,0 as the audio capture device. (Result: no sound track at all in the resulting video.)arecord, then aplay.alsamixer. The capture source is set to "CD" (and on the input side it's also "CD" where I can effectively modify the volume for audio going through...), but still no result.
I just installed Kubuntu 10.10 , been using gnome Ubuntu for a few years. At the same time I bought a new video card , the VisionTech 5550HD. My Nvidia card seemed to conflict with my HVR1600 tuner , so I thought I would switch to ATI. With the FGRLX driver , there was an error in the xorg.log , so I thought I would just use the Radion Driver. It works , but glxinfo shows "OpenGL renderer string: Software Rasterizer". I assume this means no hardware acceleration. Is this normal. Graphics seem a bit choppy, I would like to get one driver or the other to perform well. By the way, I have a few problems with Kubuntu, but over all I am really liking it
View 1 Replies View RelatedI have a HP TV tuner with a ViXS Xcode 2105 chipset.. Dose anyone have any idea where I could find a driver for the card? Im running 10.04 32 bit OS
View 6 Replies View RelatedI have just installed Ubuntu on an old laptop for a little bit of programming and to gain some familiarity with linux. Im looking forward to getting to know my way around the OS
Unfortunately, the wireless card (for wifi) on this laptop is broken, so instead I have been using a wifi usb dongle on windows. I am having some trouble installing this dongle in ubuntu, i cant find a driver for it!
Its a "MicroNext MN-WD546J 54M Wireless Adapter"
[url]
I have my modem connected directly at the moment via LAN, and this works no problem, but id like to get it connected wirelessly
I bought this bt dongle, and when i plug it, the operating system detects it and everything seems to be working fine. Although, When I search for devices, neither my phone nor my laptop are found. Searching for devices on both of them doesnt find this computer either. lsusb output is : Bus 002 Device 006: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
hciconfig -a output is:
hci0: Type: BR/EDR Bus: USB
BD Address: 00:15:83:11:F7:58 ACL MTU: 384:8 SCO MTU: 64:8
UP RUNNING PSCAN ISCAN
[code]....
I use Bluewhite64, a Slackware64 derivative. Next, I don't use KDE or GNOME. What free tools (command line ok) would do this job? Examples would be nice, too. Most of my HD recordings are approximately 7 GB.
View 12 Replies View RelatedI have an HP Designjet z3200ps but I cannot find a linux driver for it. What should I do now ?
And I'm also wondering if the linux driver for etc device is not developed, what should the Linux gurus do ?
I'm trying to get my new Wireless USB dongle to work with Xubuntu 9.10 Karmic Koala. I've extracted the .rar file that was on the drivers CD that came with the dongle. According to the ReadMe....
The Model Name is: RT2870 Wireless Lan Linux Driver Driver Name: rt2870.o/rt2870.ko Hardware: Ralink 802.1n Wireless LAN Card Description: This is a linux device driver for Ralink RT2870 USB ABGN WLAN Card. My issues:
1. I do not see the driver file anywhere in the folder contents... I suppose that I have to "build" it.
2. In the makefile the chipset is default set to "CHIPSET = 3070" & the folder that holds all the extracted files is named 2008_1128_RT3070_Linux_STA_v2.0.1.0 so I'm confused as to whether this dongle has a 2870 or 3070 chipset inside. Does it matter?
3. Sorry, I'm a bit of a n00bster when it comes to all this, but I'm having some problems with the build instructions. It reads:
[Code]...
How do you find out which driver is being used for a certain device. Say that I run lsusb and I find "Bus 007 Device 002: ID 046d:c043 Logitech, Inc. MX320/MX400 Laser Mouse", how can I find out what the active driver for the device is?Also, is there some way to list all available drivers for a device? Is there a way to change the driver at runtime?
View 1 Replies View Relatedfind a nvidia driver GEFORCE G102M. and my laptop model is ASUS K40IN.
View 4 Replies View RelatedI have a Lenovo T410 laptop. I'm unable to find drivers for the ethernet card, the wireless card and graphics. I don't even know what hardware is installed in the system. Here is the product ID if it can help in identifying the hardware.
Product ID : 2516CTO
I can't find a be2net driver for the emulex nc553i nic that is being used on the HP 460c Blade G7. I tried to build one from the src rpm provided on the HP site but it fails looking for a be_xmt function.
View 3 Replies View RelatedI can not install a driver for device EDUP WU2070. I have a disk with a driver for linux general. I don't know how to compile a makefile. My OS 11.3v doesn't see a device.
But when I run in Live CD mode all drivers install automatically and my WI-FI device work properly.
I am using prolink pixel view USB tv tuner. How i can watch TV & configure the USB TV tuner. How I can detect my usb tv tuner. Its work fine in Windows. Now I had installed Open Suse 11.3 .
View 1 Replies View RelatedIf my webcam is plugged in when I start up my computer, it ends up being the only thing I can use -- I can't switch off of it in tvtime. If I leave it unplugged and restart my computer, I can then use my TV tuner card.
View 1 Replies View RelatedFirst of all, great work openSuSE team and friends ! openSuSE 11.1 is currently the best linux distro. Now, I'm migrating form Windows Vista to openSuSE. I managed to configure everything I need except my USB TV Tuner. I have a Kworld VS-PVR305U. I'm not new to linux, but my knowledge is limited. P.S. I'm using a Acer Aspire 5920G - 1A1G16N (1.5 Ghz Intel Core 2 Duo, 2 GB RAM, 160 HDD, 8600M GT)
View 5 Replies View RelatedI'm looking for an HDMI-capable TV Tuner card (that preferably works with linux).
View 9 Replies View RelatedHas anyone had any success with installing the HVR-950Q TV Tuner card? I am trying it after giving up on the hvr-1500c (15 months trying!).
View 9 Replies View Relatedbased on the HW compatibility list, I bought a Conrad "Bluetooth Stick Micro" (Order number 97 19 99) => Does someone know, if this is "really" the one mentioned in the compatibility list ? Can I find out, what chip(set) is used ? (I'm somewhat "afraid", that the name might be the same, but the chip(set) changed. No, it is unfortunately not mentioned in the documentation coming with it) Unfortunately I didn't get it to work on Suse 11.2 (64 Bit) so far. This is what I tried: Installed bluetooth packages, based on the information I found.
These are:
root@godot:~ # rpm -qa | grep -i blue
bluez-gnome-1.8-9.4.x86_64
kdebluetooth4-0.3-9.1.x86_64
bluez-4.56-1.1.1.x86_64
[code]...
I looked for a bluetooth section in yast2, but couldn't fine one. (I think I saw one in earlier releases...) => Did I miss it ? Do I miss a package ? (I checked all packages containing "yast" for something.) So, with no yast2 module present, how do I do the basic configuration ? The documents I could find all describe how to use the bluetooth connection, if the basic setup suceeded.
After connecting the dongle, nothing shows up to let me know the dongle is connected.
The software downloaded can not be started.
I havejt upgradd mylatopto WIN 7 but now i want to ry Linux, SUSE 11.2
I am worried that the gprs i use for internet will not work.
I rang my internet supplier and they told me NO! They only support windows and MAC!
Whats so hrd about including Linux ?
I recently migrated from Gentoo Linux to openSuSE because I no longer have that much time to maintain the sane state of my system, and want my computer to just work when I need it.. So far openSuSE surprised me and I was able to configure my system almost completely without even touching the shell where I almost lived in the Gentoo days..
However, I'm not able to make openSuSE automatically detect my logitech BT dongle (as part of a dinovo keyboard and mouse set) and switch it from HID to HCI mode so I'm able to use bluetooth.
What does work is this:
Code:
# /usr/sbin/hid2hci --method=logitech --vendor=046d --product=c70c
Then the dongle is switched to HCI mode, a bluetooth applet appears in gnome and I was able to pair with the keyboard, keypad, mouse and mobile phone
But I don't want to manually run that command each time, so I figured the best way is to let udev handle that (?).. As I didn't find any udev rules to perform such an action I tried creating one myself, however, I'm not sure that I'm doing it right /etc/udev/rules.d/70-hid2hci:
Code:
ATTRS{idVendor}=="046d", ATTRS{idProduct}=="c70[345abce]|c71[34bc]", RUN+="/usr/sbin/hid2hci --method=logitech --vendor=$attr{idVendor} --product=$attr{idProduct}"
But that doesn't seem to work..(yes I reloaded the udev rules using udevadm)
how do I make this work? And shouldn't it already work out-of-the-box?
my wifi and dongle usb modem both are not working doesn't work on dell laptop inspiron 1520 withn opensuse 11.2.
View 1 Replies View Relatedmy Bluetooth Dongle from Sitecom Model CN-502 doesn`t works under openSUSE 11.2.I plug it into USB but no Reaktion. Under 11.1 it works?
View 1 Replies View RelatedIm a Linux newbie and am running OpenSuse 11.3 (Gnome, 2.6.34.7-0.5-desktop Kernel) and Ive an Asus N13 wifi dongle (linux compatible). I currently connect using my laptopś internal wifi but I bought the dongle due to trouble with weak signal. It came with some sort of code that can be "compiled" but I havent got a clue how to do that (and I have been researching this matter for quite some time now). I then came across a post where someone with the same USB stick created and added only two small files to his filesystem and it worked...for him (maybe becasuse he was on a different Distro )
Ralink RT2870 USB Stick and created the two files mentioned in the post (network_drivers.rules and network_drivers.conf) and placed them in ETC... etc, etc! I rebooted the system but NetworkManager only lists it as "device not ready" ... So now back to square one.
[Code]...
Just purchased this USB wifi NIC. installs and work perfect under Win XP, how ever I can't seem to get working on my opensuse 11.3
Network manager did not recognize the NIC out of the box (still doesn't) so I started trawling the forum and I've read both wireless 'stickys'.
When out of the box did not work I installed the rt3070sta-kmp-desktop - RT3070 Wireless Lan Linux Driver from the repos.
My Nic and kernel version
Code:
lsusb
Bus 001 Device 004: ID 148f:3370 Ralink Technology, Corp.
uname -a
XXXXXXXX 2.6.34.7-0.5-desktop #1 SMP PREEMPT 2010-10-25 08:40:12 +0200 x86_64 x86_64 x86_64 GNU/Linux
[Code]....
On Linux Mint (Gnome) i used to go to Network drive. that is on the right hand side of Nautilus there is a short cut for Network. in there i could see my network hard drive and other laptops connected to the network, and i could access my files. but on OpenSuse, when i open the network folder, nothing comes up. may be it needs some sort of configuration.
View 2 Replies View Related