When my system boots it hangs at
Code...
and hangs for another 120 seconds. In X11 I have no sound at all even after running alsaconf with no errors. My sound works perfectly in Ubuntu, so it's not a hardware problem. Are the two problems related or are they two separate things? Any help here would be hot.
I am unable to complete the installation of Slack 13.0 on a new machine with Intel DH55HC motherboard and Intel Core i5 750 processor. The installation proceeds smoothly until the 3'rd CD and then hangs at the FONTCONFIG UPDATE stage. The hung process is apparently rescan-scsi-bus which reaches this stage
"Scanning host 6 channels 0 for SCSI target IDs ....
"Scanning for device 6 0 0 0...
"NEW:
It is not possible to kill this process even with "kill -9". I have to kill the parent process which is Slack setup, so the installation is incomplete. There is another recent thread on this issue [URL] but it did not resolve my problem. How to correct or bypass this difficulty (maybe another kernel? I use the default).
I'm trying to bring my Slackware system back to life as my XP HDD is dying... I've got everything working except for my audio. I got a new motherboard (ASRock P43DE3) and it has a VIA VT1708S as the onboard audio. Is there any way I can get this working without rebuilding the kernel?
View 5 Replies View RelatedI'm attempting to install F12 64 bit. I currently have F10 running on this system. I'd like to do a clean install. I'm using the DVD. I boot the computer with the DVD in. I choose the first option (Install or upgrade). It starts the boot process and then it hangs. [URL]
After asking at #Fedora I was given the advice to boot with `intel_iommu=off`. That gets me slightly further in the process. It gets to the point where anaconda is starting. Then all heck breaks loose. It appears the monitor loses the signal from the computer (power light turns red just like if the computer was off). The caps lock and the scroll lock lights on the keyboard blink about once a second. The DVD drive continues to spin for about a minute and then stops. Since I have no display, I have no idea what's going on.
Running Ubuntu Server 10.04 32 bit. Sometimes when I reboot it does not start up, It seems to be going through the boot process but then just hangs. I have had a look at the log files and can't see anything, but I'm not really sure what I am looking for.
View 2 Replies View RelatedEver since the kernel update to 2.6.34.6-47.fc13.x86_64, my boot process hangs at about startx time. I boot cleanly at runlevel 3 in either this or the previous 2.6.33.8 kernel. If I execute startx from here (in either kernel), the system hangs at the same place. During the early troubleshooting, I read in another thread (250929) about installing xorg-x11-drv-catalyst, which I did using yum. This led to the failure of the 2.6.33 kernel; yum remove did not fix this. I have carefully followed the instructions in the fglrx HOWTO (updated a week ago by Hlingler) as they relate to a PAE kernel (including reinstalling mesa-libGL), and that fixed earlier difficulties. Hence, I felt I needed a new thread.
dmesg tells me
Code:
microcode: CPU0: patch_level=0x2000032
platform microcode: firmware: requesting amd-ucode/microcode_amd.bin
Linux video capture interface: v2.00
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
microcode: CPU1: patch_level=0x2000032
platform microcode: firmware: requesting amd-ucode/microcode_amd.bin
microcode: Microcode Update Driver: v2.00 .....
But the program itself reports
Code:
# microcode_ctl -h
This program is for updating the microcode on Intel processors belonging to the IA32 family - PentiumPro upwards (x86-64 included). It depends on the Linux kernel driver. The website urbanmyth.org/microcode (mentioned by yum info microcode_ctl) clearly indicates that Intel has taken over this microcodecode distribution, and suggests that it is no longer valid for AMD processors.
I found a reference to a kernel configuration flag CONFIG_MICROCODE_AMD (as a plausible subsititute for CONFIG_MICROCODE_INTEL) that possibly belongs in a script in /etc/init.d - but the above context leads me to suspect this is not true any more. In any event, those flags are not mentioned anywhere in my init.d scripts - in fact nowhere in the entire /etc tree. My microcode file exists, and is dated March 23. How do I get it installed? Or is this completely unrelated to my hanging boot problem, as suggested by the "platform microcode" line in the dmesg output? If so, where should I be looking?
I have a PXE server which installed DHCP TFTP AND NFS service. and set them up followed by [URL].
The boot process hanged here:
ipconfig: eth0: SIOCGIFUNDEX: No such device
ipconfig: no devices to configure
[-n eho]
. /tmp/net-eth0.conf
/init: line 3: can't open /tmp/net-eth0.conf
...
What I did try to work around is,
1. Set portfast to all the ports connected the PXE server and client.
2. Edit pxelinux.cfg/default, try different setting in "ip=" (I did not find any menu in the internet which explain to to configure this file).
In lmms there is no sound and it says:
No audio-driver working - falling back to dummy-audio-driver
in the command prompt. Sound works everywhere else just not lmms.
i have a serious problem with my ES1371 esoniq audio card under slackware 13.1 : no sound at all !!
View 2 Replies View RelatedHere goes the problem: I have a Amilo M7400 notebook with an Intel 82852/82855 GME video card, and X is a bit uncompatible with it.I've tried using the vesa driver in the xorg.conf, but when i start Xserver, it hangs hard in a blank screen. I can't open a new terminal and control+alt+backspace won't work.
what can i do? is there a log file for X which details the initialization of it?
I upgraded to a new(er) soundcard this morning on my Slack 13.1 desktop box. I ran alsoconf and got sound working in everything but Firefox flash. It's not specifically a flash problem; flash sound works just fine in Konqueror. It's a Firefox issue. I created the following login script in order to try and force the new card to be recognized as the default:
Code:
bash-4.1$ cat .asoundrc
pcm. !default {
type hw
card 1
} ctl. !default {
type hw
card 1 }
I have a Dell desk top PC, running WinXP and Ubuntu 10.04 LTS with a Ge-Force FX 5200 video card. In trying to get both monitors to work properly I thought it would help to reinstall Nvidia binary X.Org driver V173. After I removed the driver I tried to restart the computer with Umbuntu, it hangs up at the Ubuntu logo. I can boot with the live disk, I also tried to reinstall the Nvidia driver But the machine still will not boot from the hard drive, it will boot into Win XP normally.hould I just reinstall Ubuntu or fix the problem I created? My skills working in Terminal are minimal
View 7 Replies View RelatedI have installed the 13.1 usbboot.img to a usb stick and tried to boot up an acer aspire one aod751 but it hangs when it come to the onboard webcam.I am guessing that there is no driver for this webcam.There is no way to disable the usb cam in the bios setup.Is there a command that can be given at boot so that there is no attempt to load the driver for this webcam?
View 6 Replies View RelatedI have a toshiba netbook, and I'm running linux slackware 13.The sound card is an HDA intel.So far I've ran alsaconf and configured the above mentioned sound card. I've also gone into the alsamixer and unmuted everything and turn the volume up.I get absolutely no audio.
View 15 Replies View RelatedI have just installed slack-13.1 on an acer aspire one netbook from a usb stick by booting the install kernel with noudev. I was able to do a complete install including lilo but upon rebooting my boot hangs when encountering my webcam.I see enough info to note the id as 0c45:62c0. This is a microdia webcam which I may be able to do something about later but in the first instance I'd like to be able to boot my system. The bios is very basic and there is no way to disable devices.
View 14 Replies View RelatedopenSUSE 11.2 x86_64 (ADM64), KDE4 (everything is up to date) ...
As in the Subject, after the machine boots up and I'm logged in, there is no sound using local software (video or audio, such as VLC) or web-based (as in Pandora, ....., etc).
So I have to bring up Yast -> Hardware -> Sound, then Delete the current driver, then select "Add" to re-add it ... it detects the hardware fine, and sets up the sound driver, and I then get sound. However, when I shut down the machine and eventually fire the machine back up, no sound.
Driver: snd_intel8x0
Controller: CK804 AC'97 (onboard nVidia chipset)
I ran dmesg and saw nothing out of the ordinary. All appropriate files/entries exist in /etc/modprobe.d/
What can I do so that the driver is loaded at each startup?
I had a response out in alt.os.linux.suse who said the problem went away when they switched to GNOME ... so is this possibly a KDE issue? (I haven't tried restarting and running GNOME versuse KDE).
I upgraded to current, and x won't start... I suspect it's probably an issue with the Nvidia drivers (I forgot to swith my xorg to the nv drivers; I knew I'd be getting a new kernel). Anyway, it leaves me with an unusable computer. Is there anyway I can get into a console before x tries to start. BTW, the ctrl-alt-f1 hotkey isn't working.
View 4 Replies View RelatedWhere do I change the option to have samba start during the boot process? I've googled and I've found old posts that say it's a line in /etc/rc.d/rc.inet2 but in my semi-current box, I don't see the part about starting stopping the samba server.
View 5 Replies View RelatedTo start off, I am about 3 days into my new ubuntu operating system. I am a complete newbie, but i have picked up alot in the last couple days. My sound was previously working, but the microphone was glitching when using skype. After running a bunch of different commands in terminal that were posted on forums from all over the internet, I rebooted my computer to find no sound. I have searched the forums again and tried many different command lines in terminal to no avail. My system setup is found here: [URL]
View 7 Replies View RelatedI was just using the mic and watched it stop working suddenly. I was in the middle of a skype test call when the graphical mixer level died down to zero in the middle of the call. When the test call was played back, the first part sounded fine then the sound got lower until it became inaudible. Since then I can't get any sound from my mic in skype.
Also, the audio input level graphically shown in Sound Preferences shows no fluctuations in sound as it used to before. The input device is enabled. I tried using Sound Recorder to record some sound clips and that worked fine. So the mic is working but Sound Preferences and Skype seem to have the mic level really low. I'm not sure what else to think considering it was working perfectly a few minutes ago. I've tried restarting, but that didn't fix it either.
For those that use Virtualbox on their slackware host and have a windows (xp) guest running. I have tried various settings for sound (Alsa, PulseAudio), the AC97 drivers are installed in the Windows xp guest os, but there is no sound and there is an unknown audio device (in the windows device manager). If I remove the AC97 drivers and use the soundblaster16 drivers in the Vbox settings there is no unknown sound device, but there's still no sound. why I can't get sound working?
View 13 Replies View RelatedI have been using windows operating system for a long time now, but I am not well familiar with linux. Whenever I used to install Windows, I used to install the corresponding audio drivers(in order to listen to the music). The problem I am facing is that I do not know how to install the audio drivers(if they really exist in linux Mint 10 operating system). As a result I am not able to listen to any audio file due to lack of corresponding audio driver programs. make proper configurations settings so that I can listen to audio files in Linux Mint version 10.
View 4 Replies View RelatedI've just installed the new Fedora 11 (just released) through a Live CD having 3 partitions created:
"/boot" - ext3,
"/" - lvm (part 1)
swap - lvm (part 2)
now, I want to add my new Fedora system entry to my "central" lilo.conf, resident on another linux distribution. So, i've done
[Code]...
my lilo fedora entry boots fine but... at the middle of "after boot" loading the system hangs and stops the usual driver detection, etc (normally, it hangs on the CDROM detection or USB 2.0 camera detection).
In the past, I've rebuilt the kernel with the i915 driver built-in, and that works fine. But is there any way to do this without recompiling your kernel? I read that I shouldn't use vga=XXX with Intel KMS.
I tried adding the i915 module to my initrd, but that gives me an error message on boot. Something like "Unable to initialize the agpgart module"
I installed a fresh copy of Slackware 13.1 (stable) on one of my media servers and I am experiencing something strange.... When I power up the machine, I see the kernel booting, no errors, until it gets to the point where it says:
And then randomly freeze there.... Well the machine is not totally frozen because the cursor still blinks. But it will never continue... Like I said, this happens on a random basis... After a reset, it might go through or simply stall at the same spot.
I remember after installing Slack 13.1, I rebooted the machine but forgot to remove the DVD from the player, so the install routine started up, and froze at the same point when it was loading the kernel for the setup programs...
My mobo is a MSI k9N platinum.
I never had this problem before.... (well I never used 13.1 before). Since I got this machine, I used slack 12.2 and slack 13-current with success.
This problem makes the machine extremely unreliable because I intent to use it as a backup and media server, so chances I will WOL the machine and use it remotely... if that happens.
i have a problem when using the yum gui it hangs at 1/3 of the process meter and wont budge no matter how long i leave it , using terminall everything works fine and fast but i would like if the gui is fixed its alot easier when searching for a suitable software
View 4 Replies View RelatedI have a process A running in the background. When I start another process B also in the background, the system hangs the moment I hit any key. Process A and B communicate over a socket. Iam not even able to do a telnet to the system. Is there any precautions that I need to take while running in background
View 1 Replies View RelatedIt goes through the kernel boot up, and the icon with the circle and keyboard. Then it stays on a blank screen with a large courser on the upper right corner. Then the courser becomes small. It sits their for a long time. Then the screen to boot or install comes up, and everything works fine. It hangs during the configuration process. I am unable to skip. I think it hangs during the kernel config.
I click on the drop down arrow and see the fallowing:
ubuntu ubiquity : update-initramfs: generating /boot/initrd.img-2.6.38-8-generic
My pc set up is as fallows:
Asus M2N-MX SE Plus
AMD Athlon64 X2 5000
A sata samsung lightscribe dvd
A IDE Western Digital HD (Do not know what model)
NVIDIA GeForce 9500
It is from a downloaded burnt copy. The md5 is good. I burnt it at a slow speed. I do have a known good 10.10, but it starts out exactly the same.
I am unable to hear any sound at all using my M-audio delta 44 soundcard (which works fine in Windows - Dual boot).how I can get this working?
View 4 Replies View RelatedStrange one. Just upgraded my mother-in-law's computer from 8.04 to 10.04 via the update manager. All seems to be working beautifully except ...
* When I run gstreamer-properties and do an output test I get a test sound through the headphones plugged into the front audio socket of the machine using the 'Analogue Headphones' setting in Sound Preferences. (This rules out dead headphones.)
* When I try to play audio through any app I get no sound through the headphones, but if I change the setting to 'Analogue Output' in Sound Preferences I get audio loud and clear through the speakers which are plugged into the audio socket at the rear of the machine. how the gstreamer-properties test is getting audio to the front socket I guess I'd be getting somewhere.
