General :: Installing Slackware On IDE Hard Rive Boot From Slackware DVD?
Jan 23, 2010
I try to install Slackware to my IDE hard drive and boot first from Slackware DVD. After I loaded huge.s kernel, and tried to partition the hard drive using fdisk by entering "fdisk /dev/hda", I found out that the partition size is max to 3 Gigs instead of 80 Gigs.
I think the kernel is looking at my boot disk, which is around 3 Gigs. How can I make so that it looks at my IDE drive instead at my boot drive? Is there any manual that shows me how to install Linux from scratch this means I want to wipe out all my hard disk and install Slackware Linux there?
I have one machine with two disks that I'd like to install Slackware on. I'd like to have the root folder and installed folders on hdb, and just have have hda as a disk I can use for storage (without any home directories, etc.). My problem is, I don't know how to make this boot, as I think LILO is installed on the primary drive, but the boot folder is located on hdb. I tried doing this before and was having problems booting, so I was just going to go through the whole process again, but don't really know the correct procedures.
I'm a pretty experienced Windows user, and have coded in x86 and win32 API for a while, so I know the system reasonably well. I've used windows since the days of Win95, and prior to that I had an Amiga - so I'm pretty rusty in unix-like operating systems. I have little C coding knowledge beyond reading it, though I can understand what the programmer is doing from reading the source. My only experience with installing linux was on a 486 laptop that failed spectacularly when the CDROM couldn't be detected and used, so I'm necessarily a little wary of doing this, but I've become quite exasperated with Windows lately.
I have decided to make my life interesting (if not easier at first) by dual-booting Linux with Win7. My current machine is a dual-core intel laptop with 2GB of RAM and an ATI X1250 mobile GPU, with a 120GB HDD. I have two partitions currently on this machine - both 60GB-ish. The main C: drive is Win7. I'm aware of the hidden partition that Windows installs. I have an external 1TB USB drive for my applications and data, so space shouldn't be a problem. There is no floppy drive (unsurprisingly) and I can boot from the internal DVD drive.
I have chosen the Slackware 13 distro because it seems to be well respected as a learning tool for unix-like operating systems. My main aim here is not to abandon Windows at first, but to learn a new OS. I'm aware that Slack may not be the most user-friendly distro, but will give me knowledge that I might not gain under other distros. If I'm making a mistake here, then let me know! I have plenty of free time to devote to this little project, and I'm not afraid to learn. I am however afraid to destroy my Win7 fall-back. If all else fails, I need to be able to go back to a working OS to jump on the net to find the answer to what went wrong.
So my question, as per the subject title, is: What do I need to know before I do this? I have no idea what I'm doing with regard disk partitioning beyond Partition Magic - which I don't actually possess anymore. I can use the Windows disk management app. I have no idea how to manage a boot sector. So are there any gotchas that I need to bear in mind? I've already read this thread: [URL]. Which I must admit looks very complicated! I have a fair bit of time before my Slackware 13 DVD-ISO image downloads (20KB/Sec) so have some time to gather information.
Long time Slack user, thought I would try to update my old laptop (Toshiba Satellite with AMD K6-2 333 MHz, 128 MB RAM, 40 GB hard drive) from 10.2 to 13.37 in celebration of the newest version :-)
By update, I mean a complete wipe and reinstall, just to be clear.
So 10.2 runs well, everything looks shiny (XFCE of course) but when I try to install 13.37 I run into trouble. I figured out to boot with huge.s instead of hugesmp.s, but when I try to run 'setup' I get an error that says I have no partitions. mkay, I try fdisk (or cfdisk), but I get literally NO response - no error, no nothing but a return to the command promt. It is exactly as if fdisk does not recognize there is a hard drive there at all.
I boot back into 10.2,check the BIOS, everything looks fine, I have a drive mounted at /dev/hda1, swap at /dev/hda3. Are there some additional parameters I should be booting with? Does it matter that the hard drive is ATA?
I am hoping to find some-one to help me install Slackware on a USB hard-drive and get it to boot. I get it installed just fine, except, when I go to boot into it, I get a kernel-panic --error message. I am sure its the kernel and that I need to some-how set up a initrd, however, I am a little rusty these days and can not quite seem how to do it. I have a Western Digital Passport external (USB) hard-drive. I will joy-in all help, and, I'll keep looking.
I started a thread asking for advice in the hardware forum. I didn't want to post a duplicate thread, but I was unable to get it moved here, so I'm kindly asking you slackers to help me install the aforementioned driver.
I have been given the task to install slackware 13.1 over windows. I have downloaded and copied slackware 13.1 on to a disk, and rebooted the computer, but i am not getting what all the tutorials have shown. I have been looking for tutorials that specifically instruct me as to how to install slackware 13.1 on to a windows xp. I am not trying to dual run I just simply want to run slackware and slackware only.
After I complete a big project I'm working on I'm going to be wiping and re-doing my desktop machine, probably in the next day or three. I'm going to be setting up a dual-boot; my first in about three years. I'll be using separate hard disks for this, and installing Slackware second on the bigger of the two drives. When I've done this in the past I've used Grub; Is there anything I need to know or pitfalls I need to avoid doing it with Lilo?
I'm getting a netbook with no cd/dvd drive but it boots off of usb, so I've made a slackware 13 usb stick to start the install. I also have a usb hard drive I was going to copy the packages to. I'm wondering... should I boot with the usb install stick and then connect the usb hard drive afterwards?
I'm now up and running on slackware 13 x64. I have noticed that the version of Python installed was 2.6.2 but there were a lot of bug fixes between this and 2.6.5. What is the best way to get 2.6.5 running on my machine. Do I have to install from source or is anybody aware of any packages that have been released?
Again, I'm not too familiar with package management systems on Slackware as I have always installed from source but this became a bit of a bind recently as updating software to newer versions involved a lot of hard work. Can anybody give me an ideas on the packaging systems available, the best ones to use, and where I can find information about the packages related to the package managers?
I'm trying to install Puppy 525 on my Slackware 13.37 PC as a dual-boot using LILO. Puppy is living, all on it's own, in sda6, a 6 GiB partition. It got there by using the Puppy Universal Installer and selecting a 'Full' install, not a 'Frugal' install. I cannot find 'LILO' type instructions, only 'GRUB' type instructions.
Has anyone succeeded in doing a hard drive install of Puppy with the LILO boot loader?
Edit: I'll probably regret it, but I used Puppy's GRUB installer.
I installed Slackware 13.1 and Windows server 2008, I also installed LILO in MBR, I Found I can boot into slackware, but can't boot into Server 2008. then I　use command bootsect/fixmbr. now I can boot into server 2008, but the problem is I can't boot into slackware. I try to install lilo to supper sector. it's not works. I only can boot my slackware by a USB stick.who can help me to solve this problem? I really need these two systems.
When i install slackware12 on xen,no matter in http or ftp,there is always a error as follows.
[root@lx xen]# virt-install --prompt What is the name of your virtual machine? slk How much RAM should be allocated (in megabytes)? 1024 What would you like to use as the disk (file path)? /xen/slk How large would you like the disk (/xen/slk) to be (in gigabytes)? 10 What is the install URL? http://10.1.71.247/slk
I'm trying to install the latest version of Flash in Slackware 13 on a 32 bit machine. Adobe seems to have rpm and deb installers, but there's no TXZ. Normally, tar.gz wouldn't be a problem, but the package they have there only contains a shared library. No installation script, no readme, no nothing. Further, the SlackBuild is for an outdated version, and the installation doesn't work.
I have a problem with the cyrillic and writing in Bulgarian in text files (In the Pidgin I have not problem). I saw that if I install the windows fonts this will resolve the problem, but I can't find slackware package and even source package.
I have just been forced into upgrading my mother board and cpu so now own a x86 cpu and was thinking i would give the x86_64 Slackware a try. I realize that i need to do a reinstall but can i save my /home partition? Will that save my settings or am i asking for problems? I assume i can just drop all of my config files into the new install as well.
I'm back to slack after several years. I'd like to install wine. I have downloaded wine-1.1.33.tar.bz2[URL]..I am currently looking at the installation instructions. I would welcome any advice, comments or caveats that might contribute to the installation. In particular, have I made the correct download? Another example: My preference is that the installation be made to /usr/local, since that directory is on its own partition. Will that introduce any problems?
It seems like this error is related to some handbook or translation documentation? Is there some dependency I'm missing? (There shouldn't be according to SB). Or is there a way I can block compiling this documentation in the build script? I tried commenting out "set -e" in the build script, but the resulting packing wouldn't run after I installed it.
I updated my kernel in slackware current but can't install lilo, when i was with my old kernel it gave an error about not finding the sda drives (they were named hda before the upgrade).I booted into the slackware 13.0 dvd and modified fstab and lilo.conf replacing hda with sda but lilo still gives an error of not finding sda drives.How can i install lilo so i can boot into my sistem??
I just did a fresh install of slack 13.1 on a separate drive to the one I was previously using. I've been having trouble getting lilo to work, so that I can choose between either drive. Lilo is currently installed to /dev/sda, with the old system on /dev/sda1 and the new installation on /dev/sdb1. I keep getting errors like these:
Code: Fatal: Trying to map files from unnamed device 0x0011 (NFS/RAID mirror down ?) I managed to install lilo from the old system by copying the kernel image from the new system into the /boot/ directory and running lilo. I am now on the new system and trying the same thing in reverse but it isn't working. I have searched around a bit and there's a lot of talk of chroot-ing into the other partition to run lilo. I don't understand why the process isn't working both ways though. I can't run lilo on my new installation even with the two kernel images in the local /boot/ folder. Is this something to do with btrfs or am I missing something to do with lilo? This is my lilo.conf file. I am trying to run lilo using this file from my new installation on /dev/sdb1 and getting the error given above.
I've a multiboot machine and I recently installed Slackware64-13.1 on sda33. I added menu entry in SUSE boot loader and configured menu list as per [URL].. it returns GrUB error 15. Here is my menu list entry for Slackware -
Code:
###Don't change this comment - YaST2 identifier: Original name: other### title Slackware64-13.1 root (hd0,32) kernel /boot/vmlinuz root=/dev/sda33 ro hdd=scsi savedefault
My new job requires I use Windows and as such I put a second HDD in my laptop for the purposes of Window/Work The issue is that Windows will not install on this second disc (Windows cannot create partition or install to disc). I got around this by installing Windows to the first disc, then the second then putting Slackware back on the first but then I suffer the "Bootmgr cannot be found, press ctrl + alt + delete to restart".
I am using Lilo and I have never really had an issue dual booting them on the same disc (Admittedly over a year ago) but it is of the utmost important I have them on separate Discs. Has anyone encountered this and/or know a way around?
I recently had a laptop die on me. I, of course, then to recover the hard drive. I wanted to install slackware to a partition on my drive, so I can have a linux distro with me( also I have a FAT32 partition for shared space) I have a Slackware 13.1 disk one (which i need, since I don't need a graphical environment or anything), and proceedd to follow setup program. I have a 5GB '/' partition, a 10GB '/home' partition, and a 2GB swap partition. My ROOT partition is bootable. The setup program seemed to complete succesfully, but it won't boot. When I choose to boot from my hard drive (in the bios), it reverts to the slackware disk, if present, or the standard windows drive.
I installed LILO to the superblock of my external, because according to the setup the MBR option installs to "The MBR of your first hard drive", and I wasn't sure if that was right, since my first hard drive is my windows one. Since i'm not even seeing LILO, I think it has to do with installing to the superblock. I want to be able to boot a basic linux distro if needed from whatever computer I want. I'm not sure if slackware was the right choice, but it was one that I had worked with installing before, and knewthat you didn't necasarraly have to instal all the graphics stuff. I just want a shell. Sorry if my question sounds retarted, I'm new to the whole "Multiple drives, and operating systems" thing
A friend of mine threw me an OLPC (original model with 1GB of storage) that he was trying to put slackware in. He managed to install a minimal installation, but now it asks for the e2fstools (the stuff to run fsck on ext(2/3/4) partitions) which he didn't install (he formatted the "disk" as a single jfs partition). Is there any reason why it would want to have those tools given that there are no ext(2/3/4) type filesystems in that machine? And is there any specific init script (or udev rule) that can be edited to make it not try and check ext(2/3/4) partitions?
