Slackware :: 13.37 Boot From A USB 320gb Hard Drive?
Jun 30, 2011Can Slackware 13.37 boot from a USB 320gb hard drive?
View 5 Replies
ADVERTISEMENT
Ubuntu :: 320gb Hard Drive Filled Up With An Installation?
Feb 28, 2010A month or so ago, I built a new box. I installed a previously used 320gb hard drive and a newly bought 1TB hard drive.Before formatting anything, I copied all the contents from the 320gb hd to the 1tb hd using windows, since at that time for some reason I couldn't get Ubuntu to read the 1tb drive.At some point, I managed to format the 1tb drive as ext3 (don't know why I didn't have the ext4 option), and copied the files I wanted backed up from the 320gb to the 1tb drive.Once I did that, I prepared to delete the files from the 320gb drive. The thing is I can't find them anymore. I had made a /Storage directory, and now the 1tb is called like that too.The thing is, the 320gb drive is almost full, but it only has my Ubuntu installation. I keep my file in the 1tb drive, so the 320 should be fairly empty. How large can a Ubuntu installation get? 300+ GB???
Where should I look to see what I'm using the space with? I think (this was about two months ago) I created a directory Storagetempo or something like that. How would I look for it?I realize a solution could be just reinstalling Ubuntu on the 320gb drive, since I have all my other files on the 1tb, but that seems too "windowy" to me.
Slackware :: Cannot Boot Without Second Hard Drive?
Jun 24, 2010I have two SATA hard drives in my slackware 13.1_64 Desktop.
On 1. Drive I have 3 partitions for Win 7:
/dev/sda1 - Some Win 7 boot partition
/dev/sda2 - Win7
[code]....
Slackware :: Install And Boot On USB Hard-drive?
Apr 4, 2010I am hoping to find some-one to help me install Slackware on a USB hard-drive and get it to boot. I get it installed just fine, except, when I go to boot into it, I get a kernel-panic --error message. I am sure its the kernel and that I need to some-how set up a initrd, however, I am a little rusty these days and can not quite seem how to do it. I have a Western Digital Passport external (USB) hard-drive. I will joy-in all help, and, I'll keep looking.
View 2 Replies View RelatedSlackware :: Boot With The Usb Install Stick And Then Connect The Usb Hard Drive Afterwards?
Feb 20, 2010I'm getting a netbook with no cd/dvd drive but it boots off of usb, so I've made a slackware 13 usb stick to start the install. I also have a usb hard drive I was going to copy the packages to. I'm wondering... should I boot with the usb install stick and then connect the usb hard drive afterwards?
View 4 Replies View RelatedSlackware :: Boot Triple Windows7 Arch - Partition Hard Drive?
Mar 12, 2011I have a desire to boot Tripel windows7 arch and Slackware but unsure how to partison my hard drive??
View 5 Replies View RelatedSlackware :: Adding Another Hard Drive Changes Drive Id's In /dev/sd*
Mar 29, 2011I have a dual boot computer with slackware_64 13.1 and windows.
I have a 120G ide hard drive that I need to add to my computer.
Adding this hard drive changes the drive device id's and slackware won't boot.
as installed, my drives look like this:
When I add the extra hard drive, it looks like this:
I know there is a way to make an initrid and to use the uuid identifications for the drives, and even use labels instead of the long uuid's, but I'm unfamiliar with this process, so I was hoping somebody that's done this before might point me in the right direction.
General :: Installing Slackware On IDE Hard Rive Boot From Slackware DVD?
Jan 23, 2010I try to install Slackware to my IDE hard drive and boot first from Slackware DVD. After I loaded huge.s kernel, and tried to partition the hard drive using fdisk by entering "fdisk /dev/hda", I found out that the partition size is max to 3 Gigs instead of 80 Gigs.
I think the kernel is looking at my boot disk, which is around 3 Gigs. How can I make so that it looks at my IDE drive instead at my boot drive? Is there any manual that shows me how to install Linux from scratch this means I want to wipe out all my hard disk and install Slackware Linux there?
Hardware :: Hard Drive Replacement - When Disconnect 4GB Drive System Fails To Boot Up And Complains - Error 21
Mar 20, 2010I have minor problem with upgrading a hard drive. I am running an old pentium lll with two hard drives. On the first hard drive I have two partitions of around 90GB each. On the first partition is installed winXP and on the second partition I have Suse 10.3, both booted by grub and living happily side by side. My second hard drive (which is formatted for windows is only 4GB.
My problem arises when I try to replace the 4GB with a 80Gb hard drive. When I disconnect the 4GB drive the system fails to boot up and complains with error 21.
Slackware :: Install 13.X To A Separate USB Hard Drive
Jun 18, 2011I am taking a course to truly learn Linux and am attempting to install Slackware 13.X to a separate USB hard drive. The intent is to keep Windows while learning Linux, and all I have to do is insert the USB drive when needed. I am using cfdisk and have no difficulty getting to the point where it wants me to partition the hhd. However, whether I have the USB connected or not, it will always present the HDA for partitioning. How do I tell cfdisk to recognize and set partitions on the USB hard drive? (i.e.) What is the command?
View 9 Replies View RelatedGeneral :: USB Hard Drive As An HDD Boot Drive?
Mar 6, 2010I have a Toshiba laptop with BIOS that will not recognize USB as a boot medium (I have purchased two USB 'thumb' drives with Distro's that do boot but the BIOS see them as HDD devices!)I did manage to install and boot a distro from the USB HD but ended up with the USB drive having to be connected' to select any of the OS partions, to boot anything.I do realize that somehow, when installing the new distro on the USB drive, I changed the GRUB configuration to be on the USB drive which obviously I did not want, so can
View 5 Replies View RelatedGeneral :: Install Slackware To An External Hard Drive
Oct 21, 2010I recently had a laptop die on me. I, of course, then to recover the hard drive. I wanted to install slackware to a partition on my drive, so I can have a linux distro with me( also I have a FAT32 partition for shared space) I have a Slackware 13.1 disk one (which i need, since I don't need a graphical environment or anything), and proceedd to follow setup program. I have a 5GB '/' partition, a 10GB '/home' partition, and a 2GB swap partition. My ROOT partition is bootable. The setup program seemed to complete succesfully, but it won't boot. When I choose to boot from my hard drive (in the bios), it reverts to the slackware disk, if present, or the standard windows drive.
I installed LILO to the superblock of my external, because according to the setup the MBR option installs to "The MBR of your first hard drive", and I wasn't sure if that was right, since my first hard drive is my windows one. Since i'm not even seeing LILO, I think it has to do with installing to the superblock. I want to be able to boot a basic linux distro if needed from whatever computer I want. I'm not sure if slackware was the right choice, but it was one that I had worked with installing before, and knewthat you didn't necasarraly have to instal all the graphics stuff. I just want a shell. Sorry if my question sounds retarted, I'm new to the whole "Multiple drives, and operating systems" thing
Slackware :: Why Accessing My Hard Drive - Locking Up My System
Aug 25, 2010At first I thought it was the daily cron jobs, but it's been at it for like 3 or 4 hours. It's driving me crazy locking up my system. I suppose I should get off the computer anyway, no real reason to be on for so long.
The only things that look weird in system monitor is kwin, virtuoso-t and X seems to be higher CPU usage than it should. And CPU usage is 20-50% when I'm not doing anything. It was indexing my files.
General :: Grub Boot Loader With Puppy - Cannot Boot From My Hard Drive
Nov 1, 2010I'm trying out puppy linux, as I have an old system, and the new Ubuntus do not work on it.
Anyway,I cannot boot from my hard drive but only from the floppy.I'm just not too keen on always booting from the floppy.
Here is the Menu.ls file:
Slackware :: Adding 2 More Hard Drive As One Partition In An Already Installed Machine?
May 17, 2011Currently I'm running a smaba on slackware 13.1 with a 1TB Hard drive for dumpng files rather than sharing. My partition table is as follows:
#####################################################################
/dev/sdb2 swap swap defaults 0 0
/dev/sdb1 / ext4 defaults 1 1
/dev/sdb3 /home ext4 defaults 1 2
[code]....
Now that i need to add 2 more 1TB hard drives and I want to stripe these two drives to make one partition for large space.
Slackware :: External USB Hard Drive Auto-mounting Error
Nov 29, 2009Just installed Slackware 13 this morning. It's been a long time since I last tried Linux, but Slack works (a lot easier than Slack 8 did back when I last used it!) quite well. I'm using the XFCE desktop and it's smooth as silk except for one odd problem-I cannot get any of my USB drives to mount. I just plugged in my Lexar 4GB USB flash drive and received an error message. Here's from /var/log/messages from when I initally plugged in the drive (I have a 500GB WD MyBook USB external drive that is always plugged in):
Any ideas or suggestions of what to look at? I'm not familiar with HAL in Linux although I've seen plenty of discussion about it and have an idea of what it's supposed to (or break! ).
Slackware :: Installing 13.37 On Old Laptop - Fdisk Does Not Recognize The Hard Drive
Jul 19, 2011Long time Slack user, thought I would try to update my old laptop (Toshiba Satellite with AMD K6-2 333 MHz, 128 MB RAM, 40 GB hard drive) from 10.2 to 13.37 in celebration of the newest version :-)
By update, I mean a complete wipe and reinstall, just to be clear.
So 10.2 runs well, everything looks shiny (XFCE of course) but when I try to install 13.37 I run into trouble. I figured out to boot with huge.s instead of hugesmp.s, but when I try to run 'setup' I get an error that says I have no partitions. mkay, I try fdisk (or cfdisk), but I get literally NO response - no error, no nothing but a return to the command promt. It is exactly as if fdisk does not recognize there is a hard drive there at all.
I boot back into 10.2,check the BIOS, everything looks fine, I have a drive mounted at /dev/hda1, swap at /dev/hda3. Are there some additional parameters I should be booting with? Does it matter that the hard drive is ATA?
Slackware :: Root User Can Not Change The Ownership Of A Hard Drive?
Apr 22, 2010I have Slackware 12.2 installed on my computer, as well as a Windows Xp. I have a hard drive named '/fat-d', which is formatted to be 'fat' and is normally used under XP. This drive can also be accessed under Slackware, both as root and the normal user.I can not write to the directory '/fat-d' when I am not root, it is normal since 'ls -l' shows that its owner is root and other users have no permission to write. The problem is that, when I tried (as root) to change the owner to the normal user:# chown [normal_user_name] /fat-dI got an error: chown: changing ownership of '/fat-d/':Operation not permittedBut how can the root have no permission to change the owner?
View 6 Replies View RelatedSlackware :: Lost Over 300gb Of Files Due To External Hard Drive Crashing?
Oct 1, 2010I just lost over 300gb of files due to my external hard drive crashing.There was an error with the files system.I tried formatting on Slackware but cfdisk didn't work for me.I'm looking for something much easier with a GUI or something similar to the Disk Utility that you get in Ubuntu.And also which format do I format my external harddrive to?Something even more stable than ext4 or ntfs? Cause I do not want my external hard drive to crash again.
View 7 Replies View RelatedSlackware :: Partitioned And Installed Slack On A 1TB Hard Drive And Missing 300Gig
Mar 25, 2010I just partitioned and installed slack on a 1TB hard drive. I then run KDiskFree under KDE, and saw that I am missing about 300Gig! Is it just a simple thing between bytes and bits like MS. Or is this an issue I can not ignore? I have 3 partitions. One is my swap, one is ext4(slackware is on) the last is a jfs partition.
View 7 Replies View RelatedGeneral :: Upgrade Internal 2.5" Hard Drive Vs External Usb Hard Drive For An Old Laptop?
Jan 25, 2010I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
View 2 Replies View RelatedUbuntu :: Can't Boot Up From XP Hard Drive?
Feb 5, 2010I have Window XP on my hard drive and now I can't get it to boot for some reason? I think it might have something to do with the MBR. I removed the drive when I was trying to make a liveCD USB boot drive . Do you think grub took it off or something. Not sure if this is something I can fix in the terminal or not
View 9 Replies View RelatedRed Hat / Fedora :: New Hard Drive Will Not Boot
Mar 19, 2010I cloned a Fedora 12 hard drive to a new hard drive using Seagate DiscWizard. Everything appeared to go well. However the new hard drive will not boot. How do I make it bootable?
View 5 Replies View RelatedNetworking :: Boot A Pc Without Hard Drive From Another Pc?
Dec 14, 2010can I boot a pc without hard drive from another pc using the "boot from network"feature in the bios? what distribution should i use can the pc i want to boot from be 64 while the one i want to boot is 32 bit?
View 2 Replies View RelatedGeneral :: Move Smaller Hard Drive To Partition On A Larger Hard Drive?
Mar 16, 2010My parents bought a new hard drive for a laptop that I've owned for several years. It's much larger than the current one, so I plan on splitting it up to dual boot it with Ubuntu.I have no problem with partitioning a drive (I always keep a LiveCD handy), but my question is this: how can I go about moving the existing partition to the new drive? This is a laptop, so I can't simply plug the new drive into another slot.
Also, even if I manage to move it, will Windows still work on the new drive in a larger partition? I've had this laptop for quite a while, and I've lost the recovery discs that came with it a long time ago. I also have a lot of software without CDs to reinstall them with. This makes not reinstalling Windows a high priority.
OpenSUSE Install :: 10.2 Can Not Boot From Hard Drive?
Oct 17, 2010I'm using opensuse 10.2 when I rebooted the my pc I got the message (in the url).P0216_171010 | Flickr - Photo Sharing!I can not boot into tty1 or tty3,5. I tried to repair with Opensuse CD but can not.
View 1 Replies View RelatedUbuntu :: Can't Boot- Bad Hard Drive Or GRUB?
Feb 12, 2010I've been scouring the forums and Google for 2 days now and am not sure which track I should follow with my problem, because the GRUB path doesn't seem to be working, nor the fsck. I'd appreciate any insight anyone can provide, as I feel I'm spinning my wheels at this stage.A few days ago, I was transferring files from my Ubuntu server via SFTP to my laptop across my local network. All of a sudden, the transfer quit in the middle of transferring a file and since then, I was unable to FTP or SSH in to the server. I hooked up a monitor to see what was going on and there was only a black screen, so I powered off the server and powered back on.
While booting, the Ubuntu logo screen initially appears, but then goes to black and error messages come up, asking me if I wish to start the degraded RAID. "Gave up waiting for root device" is the message I get and it tells me that /dev/md2 does not exist and drops me to a initramfs shell. When I try to start in degraded RAID, it tells me:
mdadm: create user root not found
mdadm: create group disk not found
[49.702561] raid5: failed to run raid set md2
mdadm: failed to run RUN_ARRAY /dev/md2: Input/output error
mdadm: not enough devices to start the array
I have 4 hard drives in the server, configured as RAID 5.I boot from a Live CD and have a look at the discs.All are said to be healthy, except for the 4th which is said to have some bad sectors.I'm unable to access (or don't properly know how to access) the /boot/grub/menu.1st file to change the root delay parameter, which is what I thought I would try first.
Ubuntu Installation :: Hard Drive Won't Boot / What To Do?
Mar 9, 2010I recently put together a computer with scrap parts that I have. It had no operating system on it at all. I downloaded Ubuntu on a different computer and burned it to a CD (I also verified the hash). I put the disk in and followed the instructions. Then when it wanted me to take the disc out and reboot I did so and clicked ok and it rebooted. I changed the boot order so that 0-HDD was first, and it said that the disk failed and wanted me to put in the system cd. Anybody have any solutions?
View 3 Replies View RelatedUbuntu Installation :: Won't Boot From Hard Drive
May 21, 2010I have an Acer Aspire One ZG5 netbook. I have Windows XP home installed. I downloaded Ubuntu 10.04 netbook edition and put it on USB drive by Unetbootin. I booted from usb and it worked perfectly. I then installed Ubuntu to my hard drive from the live desktop and nothing went wrong. Perfect so far. Next, i shut down my netbook and took the usb drive out. I booted my netbook and it started loading Windows XP, didn't ask me if i want to use Ubuntu. I shut down the computer and pressed F5 while booting. It asked me what i want to do. I selected 'go back to OS selection' and i could only choose Windows XP from there. It was the only thing i could choose.
View 5 Replies View RelatedUbuntu :: Reformatted Usb Hard Drive But Still Tries To Boot?
Jul 2, 2010if the comp happens to reboot while the drive is plugged in, it will try to boot from it, but can't because there's no more operating system, and will just freeze. Now, I know I can switch the boot order in the BIOS, which I have, but I'd also like to remove whatever "boot-flag" remains on the drive.I actually have two external hard drives and a thumb drive that do this. In case it matters.
View 3 Replies View Related