i downloaded slackware iso (4.3 gigs, i thought it would be smaller) and then when i tried to burn to dvd it give me read sector error when i tried to verify. i tried this with 5 dvd and none worked so something is probably wrong with the iso itself. is there another way to get slackware to install with a usb flash drive or should i just redownload my iso (10 hour download =( ).
View 7 Replies
I can now read, write and format a floppy disk. Score! [It only takes three separate command line instruction to unmount the drive, format, remount specifying the filing system but what the heck I can do it Now I need USB flash drive to be accessible in Slackware. Otherwise I cant get apps and multi-media data across (without great grief anyway) to test the functionality of KDE.
Gads this is hard work! There is no difference in the operation of Linux than UNIX at university in 1989! Now I see why Im seeing all these adverts for work out east saying Experience in Linux installation essential. Linux requires a wad more work than Windows, MacOS, DOS or even CP/M! You really *can* make a living out of this!
I installed in my Slackware 13.1 with generic kernel 2.6.33.4-smp VirtualBox packages taken from SlackBuilds.org (acpica, virtualbox-ose and virtualbox-kernel). Then for testing purposes I installed in VirtualBox Windows XP using CD-ROM drive connected to USB port. It's a lot of fun to see Windows as an application in Linux!
Now I'm trying to install in VirtualBox Linux Mint using either USB flash drive prepared with unetbootin or mere ISO image. Without success. It seems VirtualBox 3.2.10 OSE doesn't recognize either USB flash drives or ISO images though it recognizes CD-ROM drive connected to USB port. I found some advices searching Internet but all of them are useless.
I've looked all over the place for the utility that will create a bootable flash drive. Can anybody tell me what the name of it is?
View 11 Replies View Relatedusing Slackware 13 64bit, 2.6.29.6-smp, KDE desktop. i installed the flash-player-plugin using sbopkg. when i try [URL], it says i'm missing the flash plugin. i copied the. so file to
/usr/lib/mozilla/plugins
/usr/lib64/mozilla/plugins
and i still get the same result. what am i doing wrong?
I always have a problem in simple user mode when I insert a USB key. Can't mount, can't open with file manager. I'm obliged to open a simultaneous root session, to do what I want to manage the usb key.
In my user manager, I don't know wich group I have to add to this simple user (it's me) so I am allowed to manage the usb key.
What is the correct way to install Adobe Flash on Slackware 64-bit?
I have tried copying "libflashplayer.so" into the following directory.
/usr/lib64/mozilla/plugins
Firefox still does not see the plug-in.
I verified that I did download the 64-bit version of the plug-in from the Adobe site.
flashplayer10_2_p3_64bit_linux_111710.tar.gz
I installed multilib. Could that cause a problem finding the flash plug-in?
I went to watch a short little clip on ..... and it said I needed flash 10 so I downloaded that and the problem is, is that when I tar the file there was only one other file in the tarball which was libflashplayer.so. Would I need to download the source for that and the slackbuild if its got one. I am having difficulty trying to download anything it says to select a mirror and go from there but how do you uncomment a mirror? I cant even update my computer. I am using slackware 13.1 64 bit.
View 14 Replies View RelatedHow to install flash player and eclipse on Slackware 13.1 ?
View 2 Replies View RelatedI'm trying to install the latest version of Flash in Slackware 13 on a 32 bit machine. Adobe seems to have rpm and deb installers, but there's no TXZ. Normally, tar.gz wouldn't be a problem, but the package they have there only contains a shared library. No installation script, no readme, no nothing. Further, the SlackBuild is for an outdated version, and the installation doesn't work.
View 11 Replies View RelatedIt's not a Slackware-specific question, but I figured someone here might have some insight. Basically what I've got is a 120 GiB drive I was using to boot Slackware. I then mounted a third hard drive inside of my PC (500 GiB) that I wanted to clone the Slackware image onto. But I don't want this drive to be solely used for Slackware so I partitioned off about a 250 GiB chunk for it. Using gddrescue I cloned the image. It booted fine and everything looked good other than Slackware still only seems to think it's got 120 GiB to work with. My question is how can I make it recognize the full 250 GiB, or how can I go a different route to utilize the extra space? Is there some way I can just clone it directly and then go about resizing it afterwards? The first thing I tried was to clone it directly and then attempt to resize it afterwards.However, GParted wouldn't seem to let me resize it so I went this other route of setting up the partitions beforehand.
View 4 Replies View RelatedI am hoping to find some-one to help me install Slackware on a USB hard-drive and get it to boot. I get it installed just fine, except, when I go to boot into it, I get a kernel-panic --error message. I am sure its the kernel and that I need to some-how set up a initrd, however, I am a little rusty these days and can not quite seem how to do it. I have a Western Digital Passport external (USB) hard-drive. I will joy-in all help, and, I'll keep looking.
View 2 Replies View RelatedI am taking a course to truly learn Linux and am attempting to install Slackware 13.X to a separate USB hard drive. The intent is to keep Windows while learning Linux, and all I have to do is insert the USB drive when needed. I am using cfdisk and have no difficulty getting to the point where it wants me to partition the hhd. However, whether I have the USB connected or not, it will always present the HDA for partitioning. How do I tell cfdisk to recognize and set partitions on the USB hard drive? (i.e.) What is the command?
View 9 Replies View RelatedYou may know that there was a security release for Adobe Flash Plugin for Linux x86 but not for x86_64. There has been a development:
See : http://labs.adobe.com/downloads/flashplayer10.html
It works fine here. I have a Multilib Slack 13.1 stable.
I recently had a laptop die on me. I, of course, then to recover the hard drive. I wanted to install slackware to a partition on my drive, so I can have a linux distro with me( also I have a FAT32 partition for shared space) I have a Slackware 13.1 disk one (which i need, since I don't need a graphical environment or anything), and proceedd to follow setup program. I have a 5GB '/' partition, a 10GB '/home' partition, and a 2GB swap partition. My ROOT partition is bootable. The setup program seemed to complete succesfully, but it won't boot. When I choose to boot from my hard drive (in the bios), it reverts to the slackware disk, if present, or the standard windows drive.
I installed LILO to the superblock of my external, because according to the setup the MBR option installs to "The MBR of your first hard drive", and I wasn't sure if that was right, since my first hard drive is my windows one. Since i'm not even seeing LILO, I think it has to do with installing to the superblock. I want to be able to boot a basic linux distro if needed from whatever computer I want. I'm not sure if slackware was the right choice, but it was one that I had worked with installing before, and knewthat you didn't necasarraly have to instal all the graphics stuff. I just want a shell. Sorry if my question sounds retarted, I'm new to the whole "Multiple drives, and operating systems" thing
I recently installed Slackware Linux 13.1 , and my Wireless is down. I've only installed 3 Linux disto's on my main laptop (Ubuntu 9.10 , 10.04 , and Crunchbang Linux 9.04 , just had Crunchbang), and they all had the same problem. In all three , I was able to enable Windows Wireless drivers and every thing worked. Now , I'm assuming I have to the same ting in Slackware? Sorry , but I have no idea what my wireless card is. But I know that my laptop is a Dell Insprion E1705. One last thing , I did ifconfig and that wlan0 is my Wi-Fi interface. I typed ifconfig wlan0 up to see if that was the problem. After I did that , I got and error message. Then I typed ifconfig wlan0 down to see if it was down and it made wlan0 down. I tried bringing it up again , but I got an error saying it couldn't find the device specified. Also , how do I install XFCE? I really don't like KDE for some reason and would like to install XFCE. I chose XFCE over GNOME (my favorite) because I want to try something new.
View 4 Replies View RelatedI created this small how to install the binary Blender 2.49b on Slackware 13.1 86_x64 Multilib.
http://wiki.blender.org/index.php/Do..._Blender/Linux
I'm trying to install Puppy 525 on my Slackware 13.37 PC as a dual-boot using LILO. Puppy is living, all on it's own, in sda6, a 6 GiB partition. It got there by using the Puppy Universal Installer and selecting a 'Full' install, not a 'Frugal' install. I cannot find 'LILO' type instructions, only 'GRUB' type instructions.
Has anyone succeeded in doing a hard drive install of Puppy with the LILO boot loader?
Edit: I'll probably regret it, but I used Puppy's GRUB installer.
I am trying to install slackware on a drive connected to an adaptec ide controller. on bootup controller is found and installed. but how do i find this drive on setup program.
View 1 Replies View RelatedI'm getting a netbook with no cd/dvd drive but it boots off of usb, so I've made a slackware 13 usb stick to start the install. I also have a usb hard drive I was going to copy the packages to. I'm wondering... should I boot with the usb install stick and then connect the usb hard drive afterwards?
View 4 Replies View Relatedwant to know what is the best way to update system, install soft like an openoffice and so?
swaret?
slapt-get?
another one?
thanks.
I'm interested in seeing what others are doing w.r.t. fonts in a standard Slack install. The 2 main apps I use are Firefox and Thunderbird and both look fairly poor out of the box. Previously I've used a combination of gtk-qt-engine and gnome-appearance-properties ( with a gsb install ) but this doesn't always do the 'right thing'.
View 2 Replies View RelatedThe system requirements for ESET NOD32 Antivirus 4 for Linux are: Red Hat, Ubuntu, Debian, SUSE, Fedora, Mandriva, and most RPM and DEB Linux desktop distributions. Can this be installed on Slackware? I tried the download and install. Its says that after the install you need to reboot and an 'activate' application will start - it didn't. I used ESET in my prior Windows life and it was great so I thought, why not in my linux life!
View 12 Replies View RelatedAs Pat stated in the Changelog, Slackware-13.1 don't ship the nouveau X driver (yet).But it's not hard to get it either.
1. Upgrade your kernel to 2.6.34
2. Get and install the driver:
Code:
git clone git://anongit.freedesktop.org/git/nouveau/xf86-video-nouveau/
cd xf86-video-nouveau
./autogen.sh
make
[code]....
PS. There is no source tarball yet for this driver.If you want to upgrade:
Code:
cd xf86-video-nouveau
git fetch
git rebase origin
[code]....
What is the best way to install perl cpan modules in slackware?
i know that you can use 'cpan' and say 'install date::calc' but there is a perl-date-calc slackbuild on sbo. so which is the better way and why?
(Background: my wireless worked fine for a long time using wicd-1.6.2.1 and then all networks became hidden. The wicd website said there was a bug in 1.6.2.1 and to upgrade.) I obtained wicd-1.7.0.tar.bz2 from sourceforge.net. Slackware man pages recommend "installpkg <name>". I did "removepkg wicd..." and then install. Installpkg said it could not install it because it did not end in .tgz,.tbz,.tlz, or .txz. I changed the name to wicd-1.7.0.tbz(assuming that was equivalent) and did installpkg again. That gave "Verifying..., Installing..., Warning: package has not been created with 'makepkg'. Package wicd-1.7.0.tbz installed."
There is no entry for it in the Kickoff Application Launcher. There is an entry for it in /var/log/packages. There is in /etc/rc.d./rc.wicd a script marked executable. Can anyone see what got lost?
I wish to do a fresh install of Slackware without KDE. I could use my Slackware 13.1 DVD but I thought, why not give -current at try? Is there a -current ISO or must I install 13.1, without KDE, and then upgrade to -current? Or, is it possible to remove 'all things KDE' and then upgrade to -current?
View 8 Replies View RelatedAs you know, there is no JDK in Slackware 13.37, there's just JRE. So I wanna install the latest JDK in Slackware. But when I was installing, I failed. The output is as fellow:
[code]....
It looks like a little wired. The commands it cannot find such as cp, basename and so forth are system standard ones. How cannot the installation app find?
I have been trying to install a different window manager on Slackware. I have downloaded from here [URL].. And I have followed this guide to install wmii [URL].. Now when I follow the same patter, I get this error:
Quote:
root@sslf:/home/sslf/Essential# ./wmii
bash: ./wmii: is a directory
root@sslf:/home/sslf/Essential# ./wmii/wmii.SlackBuild
tar: /home/sslf/Essential/wmii-3.6.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
root@sslf:/home/sslf/Essential#
Did not find idesk in slackbuilds.
View 2 Replies View Related
