It's not a Slackware-specific question, but I figured someone here might have some insight. Basically what I've got is a 120 GiB drive I was using to boot Slackware. I then mounted a third hard drive inside of my PC (500 GiB) that I wanted to clone the Slackware image onto. But I don't want this drive to be solely used for Slackware so I partitioned off about a 250 GiB chunk for it. Using gddrescue I cloned the image. It booted fine and everything looked good other than Slackware still only seems to think it's got 120 GiB to work with. My question is how can I make it recognize the full 250 GiB, or how can I go a different route to utilize the extra space? Is there some way I can just clone it directly and then go about resizing it afterwards? The first thing I tried was to clone it directly and then attempt to resize it afterwards.However, GParted wouldn't seem to let me resize it so I went this other route of setting up the partitions beforehand.
i downloaded slackware iso (4.3 gigs, i thought it would be smaller) and then when i tried to burn to dvd it give me read sector error when i tried to verify. i tried this with 5 dvd and none worked so something is probably wrong with the iso itself. is there another way to get slackware to install with a usb flash drive or should i just redownload my iso (10 hour download =( ).
Is there any software to clone Linux partition? No matter they are paid or free software, I'll need them. The problem is that if I clone a linux partition to a bigger or smaller partition size, it will crash.
I have a dual boot computer with slackware_64 13.1 and windows.
I have a 120G ide hard drive that I need to add to my computer.
Adding this hard drive changes the drive device id's and slackware won't boot.
as installed, my drives look like this:
When I add the extra hard drive, it looks like this:
I know there is a way to make an initrid and to use the uuid identifications for the drives, and even use labels instead of the long uuid's, but I'm unfamiliar with this process, so I was hoping somebody that's done this before might point me in the right direction.
I have a 120 gig drive that I'd like to clone before it fails completely. I was thinking I'd pull the drive from the server and build a separate machine that has it's own os installed and the source and destination drive. Does anyone know of any linux tools will will do a full drive copy? Additionally, If possible, I'd like to move to a larger drive. how I'd migrate the 120 drive to a 400 or so? 1 idea I have is to install os on 2 new drives to where it they will boot, Then boot with one and copy source to the newly created destination drive.
I have been given the task to install slackware 13.1 over windows. I have downloaded and copied slackware 13.1 on to a disk, and rebooted the computer, but i am not getting what all the tutorials have shown. I have been looking for tutorials that specifically instruct me as to how to install slackware 13.1 on to a windows xp. I am not trying to dual run I just simply want to run slackware and slackware only.
1: How much does it affect securty, over a lan network? 2: Will it cause any other security issues? 3: The most important is can I forwad X11 from a 32 bit slackware to a 64bit slackware
I am soon going to have to return my intel ssd for replacement. Therefore, I am going to be cloning the 160gb drive to a 320gb drive to keep my system settings while I am waiting for my new drive. I will not change the size of the partitions to fill the 320gb drive. I'll just change the grub settings if I absolutely have to. After that, I am going to have to clone the 320gb drive back to the replacement 160gb drive. Am I going to have problems doing that since I will be going from a larger to a smaller drive?I typically use Clonezilla with the default settings.
When I first switched from windoze to Fedora I trimed a bit of space off the end of the HDD, formatted it to ext3 and installed Fedora 14 there. I have now completely rebuilt the machine and put a 2TB drive in. My intention was to upgrade to Fedora 15, but after a few weeks trying to get the new gnome to anything resembling useful, I gave up and decided to go back to the reliable 14.
I tried the old drive, and everything worked great, so I though no problem, clone that over to the new drive, and job done, no need to mess about for weeks getting all my settings back. I booted from the old drive with both connected and ran gparted, It sees both drives but won't let me copy the old partition. It complains about 'LMV is not yet supported' I tried booting from a gparted ISO with the same result.
How can I get this sorted? I've got work needing done, I don't have time to start from scratch (*AGAIN*),
Just downloaded the Slackware 13.37 ISOs and proceded to begin the installation processHowever, once the setup program gets to the stage where it looks for the CD drive containing the slackware media, no CD drive is found.Looking in /dev doesn't seem to yield any results - no hdx, sdx, or srx devices, apart from my hard drives.When starting, the following kernel messages are printed a number of times:
Code: ata5: link is slow to respond, please be patient (result=0) ata5: SRST failed (errno=-16)
I have installed Slackware 9.0 on VirtualBox and I've never used it (slackware) before. How do I access a CD/DVD inserted in my laptop through the KDE?
Ive got an old hard drive with slack on it but I lost the root password. I booted up with the slack install disk but I dont remember how to mount the drive so I can see whats on it. Ive tried to mount it with things like mount /dev/hda and mount /dev/sda and others with no luck.
FYI I'm running Slackware64 13.0 with kde upgraded to 4.3.1.When I run k3bsetup from a shell the gui pops up without the dvd listed in the device section. I know the dvd works since that's what I used to load Slackware with and I can mount cd's and dvd's and copy files from them.In the shell there is a message:QStringList Solid::Backends::Hal::HalManager::findDeviceByDeviceInterface(const Solid:eviceInterface::Type&) error: "org.freedesktop.DBus.Error.Disconnected"
Background: Before this I was using Ubuntu, but I decided to use slackware from now on. So I installed it using a DVD and using the setup program also formatted a USB drive since it asked if I wanted to. After this I could boot into slackware fine (including getting into KDE with startx) and I can shutdown using halt -r now. When I boot with the USB drive in it says "Welcome to the Slackware Linux custom USB boot stick!".
Problem: If I turn on the computer without the USB drive it goes into "grub recovery". I don't know what I should do if I want to boot the computer without the USB drive. I also don't know why GRUB is coming up because I thought it had installed LILO.
I put a larger drive in my netbook and stuck the old in an external USB enclosure so I could use it for backups. It had three partitions on it, ntfs and linux so I deleted all the partitions and created one big linux partition. Every time I write and exit fdisk the removable disk utility in KDE pops up and says ntfs drive. If I ignore it and try to formatit wants to use ntfs, if I fsck.ext3 it saysThe superblock could not be read or does not describe a correct ext2filesystem. If the deviceis valid and it really contains an ext2filesystem (and not swap or ufs or something else), then the superblockis corrupt, and you might try running e2fsck with an alternate superblock:e2fsck -b 8193 <device>2fsck -b 8193 doesn't work either.It seems like its caching something, I can print the partition table and see the one linux partition I created.
I would like to upgrade from my slackware version 12.2.0 based system. I have 200GB IDE hard drive. Tried installing with kernel version 2.6.32.7. The installation would not boot. The kernel is looking for root on sda1 when it should be hda1. Is there a way other than reconfiguring, compiling and building the kernel?
it's possible to compile the 2.6.37 kernel patched with the autogroup patch on a Slackware 13.1 system running 2.6.33.4-smp with 2.6.33.4 headers? I just compiled and installed the 2.6.37-autogroup kernel from AUR on my ARCH setup and I like it especially when using firefox with lots of tabs open and other background apps also running. I did notice a speed and smothness difference in my ARCH testing setup with this kernel patch and I can get same results in 13.1??
I installed slackware 13.1 x86_64 bit with multilib, and its been about a month already, I'm really enjoying slackware but I am being troubled with my nvidia card, and I need to get my 3D acceleration working. And I've been looking around the net for information and kept on trying to make my nvidia card to work but to no avail. I cant get X to start, once I put in a xorg.conf stating to use the nvidia card. After troubleshooting for almost 2 weeks and now at my wits end, I now come humbly looking for help in linuxquestions slackware community forum.I've installed nvidia 64 bit kernel, drivers from slackbuilds (version 256.44). The laptop model I'm trying to get it working is an -ASUS K52J Intel Core i3 2.40Ghz with 2GB RAM and with an Nvidia Geforce 310M with 1GB dedicated VRAM.
I recently installed Slackware Linux 13.1 , and my Wireless is down. I've only installed 3 Linux disto's on my main laptop (Ubuntu 9.10 , 10.04 , and Crunchbang Linux 9.04 , just had Crunchbang), and they all had the same problem. In all three , I was able to enable Windows Wireless drivers and every thing worked. Now , I'm assuming I have to the same ting in Slackware? Sorry , but I have no idea what my wireless card is. But I know that my laptop is a Dell Insprion E1705. One last thing , I did ifconfig and that wlan0 is my Wi-Fi interface. I typed ifconfig wlan0 up to see if that was the problem. After I did that , I got and error message. Then I typed ifconfig wlan0 down to see if it was down and it made wlan0 down. I tried bringing it up again , but I got an error saying it couldn't find the device specified. Also , how do I install XFCE? I really don't like KDE for some reason and would like to install XFCE. I chose XFCE over GNOME (my favorite) because I want to try something new.
I'm happy to announce Linvo 2009.1 rc6. It's a full-featured Linux distribution with a lot of applications by default, including an office suite (OpenOffice.org extended with plugins), a good internet browser (Firefox extended with plugins), a music player that supports music collection and a lot more - Exaile, a video player, and all the available codecs. It can open all types of file formats. It's a LiveCD, which means that you can test it without installing and after this optionally install it - it has a nice easy graphical installer.
It's the first Slackware-based LiveCD distribution with GNOME by default. It includes NetworkManager and initng in place of sysvinit. It also features accessibility tools. It is also the first release with the innovative portable applications system. This allows you to download application from the site (modules section), place it where you like, and use it. It's just a single file, no directories. You can also use this application without installing it, directly from the internet. However, after this, the speed of the application is limited by the speed of your connection, of course. Check out the "Applications" section on the website.
Besides this, you can install software with the apt-get-like system "slapt-get" and it's graphical front-end: GSlapt. It also contains src2pkg and sbopkg in case you want to compile something from source or existing SlackBuild Depfinder is included to find dependencies of packages. Click here for a guide on how to use those. I also managed to put development tools in there, like GCC, G++, svn, cvs, so on... This is a release candidate, and despite that it's OK for using. It has a bit more things to do until the release (like language selection on the boot menu), but I decided that it's important to put it here for testing.
We are pleased to present one of our new creations: pkgbuild, a tool written in standard C++, using libCURL, ZLib, BZip2 and libLZMA (part of XZ). It is a modern Slackware packages builder, network-transparent, multi-architecture, designed to greatly simplify the creation of a package, automatically executing the required post processing.
What does it do? Recognize and build packages for the following architectures: i386, i486, i586, i686, x86_64, IA64, IA32e, s390, s390x, sparc and sparc64.
how to on enable ling separate X sessions with dual monitors in slackware? In rhel all I have to do is enable it under the nvidia-settings... In slackware it does not work that well... to what I understand you have to configure a separate x session...
I'm trying to bring my Slackware system back to life as my XP HDD is dying... I've got everything working except for my audio. I got a new motherboard (ASRock P43DE3) and it has a VIA VT1708S as the onboard audio. Is there any way I can get this working without rebuilding the kernel?
