Slackware :: Resume After Hibernate - Current?
Oct 17, 2010
I'm using stock 32 bit current on a AAO D250 netbook. I'm running into a video issue after upgrade to the recent 2.6.35.7 kernel that doesn't exist after resume from suspend. The condition shows as a broken display that shows a black screen on the left with the KDE desktop partial exposed on the right side. Weird! My only fix so far is to blindly ctrl-alt-f6, login as root and reboot. The screen does not show the console screen during this reboot process
The pm-suspend logs show a clean hibernate and a clean thaw so that's no help. I've checked modprobe.d and don't have any alterations to any of the modules. The video module loaded is the intel_agp which sound right. I'm stumped at the moment.
View 14 Replies
ADVERTISEMENT
Mar 14, 2011
On my netbook here, I did a fresh install of --current.
I cannot get hibernate to work, it seems to fall back to suspend.
In /var/log/pm-powersave.log I get this message:
/usr/lib/pm-utils/power.d/sched-powersave false: success.
Running hook /usr/lib/pm-utils/power.d/wireless false:
Turning powersave for wlan0 off...Error for wireless request "Set Power Management" (8B2C) :
SET failed on device wlan0 ; Operation not supported.
Failed
The netbook then seems to fallback to suspend at that point.
View 7 Replies
View Related
May 21, 2015
My system cannot resume after hibernation. I have done all as described here [URL] ...
My have set up swap file "/swap_debian".
I have 3 partitions: sda1: windows boot partition. sda2: windows 8.1. sda3 : debian
I have the only linux distro installed: debian.
I have read lots of web pages. I have managed to set up suspend 2 disk. After dancing 2 days at the computer the system still cannot resume. I am getting "clearing orphaned inode" msgs while booting, and when booted to ram was not recovered.
Swap file is 4000 MB, RAM is 3860 something MB
My current grub is:
Code: Select all# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
[Code] ....
And yes, I did update-grub.
My current /etc/uswsusp.conf is:
Code: Select all# /etc/uswsusp.conf(5) -- Configuration file for s2disk/s2both
resume device = /dev/sda3
compress = y
early writeout = y
image size = 1855258869
RSA key file = /etc/uswsusp.key
shutdown method = platform
resume offset = 31606784
My current /etc/fstab is:
Code: Select all# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
[Code] ....
View 0 Replies
View Related
Mar 28, 2010
I found this line in dmseg when I was checking out another problem.
"[0.104467] ACPI Warning: Incorrect checksum in table [OEMB] - 03, should be FA 20090521 tbutils-246"
Could this be why I have never been able to resume from hibernate on this machine?
View 1 Replies
View Related
Oct 14, 2010
I have ubuntu 10.04 installed on a 50 gb partition on my hard drive I have given a 3.5 gb partition for swap which is > 3gb ram i have. Druing the installation of ubuntu I had specified the swap partition and its hibernate was working fine sometimes before. But I had to delete the swap partition and recreate it because of some reasons so I did that and again created a 3.5 gb partition for swap space usig ubuntu live cd.
But after restart ubuntu no longer detected the swap partition it was ok as its uuid had changed so I specified the swap partition to be mounted automatically by adding an entry in /etc/fstab and then also added the same UUID in /etc/initramfs-tools/conf.d/resume so that it could resume. After restarting ubuntu after adding the entrly in /etc/fstab i got the option of hibernate but after hibernate everything goes well but after hibernate when i start laptop again ubuntu first tries to resume but it does not and without giving any message it shows the login screen.
View 8 Replies
View Related
May 3, 2010
I'm experiencing very slow resume from hibernation. Last one was nearly 3 minutes. Sure, there is 2GB of RAM to read from disk (no SSD) to memory but that long?What could I check/do?
View 4 Replies
View Related
Apr 7, 2010
I just got a Dell Inspiron 1764 and am dual booting it with Win7 and Ubuntu 9.10.Whenever I hibernate or suspend, it goes through everything fine, but then when I resume it just boots to a black screen and I have to do a hard shutdown. Is there a fix for this? I know it's a fairly common issue.
View 1 Replies
View Related
Apr 13, 2010
So I'm having this weird problem where my computer wants to continuously resume a session from hibernate no matter how I shut it down. I think it started when I tried to hibernate my computer with the battery really low. Somehow it messed it up. In any case, it can't resume properly, but gets stuck somewhere in the middle (I think when it's trying to sort out the resume image). Each time I power it on I have to boot it, restart in the middle of the boot so the boot menu comes up as it starts up again, edit commands before boot and add the "noresume" option so it will boot up normally.
View 2 Replies
View Related
May 9, 2010
I've got a Thinkpad X31 with ATI M6 Ly card. Since Karmic, and Lucid, I get no suspend/hibernate/resume. If/when I select resume or close the lid, Lucid goes through the suspend cycle, and for approximately half a second it actually seems to go into suspend, then the screen comes back on, black, but definitely on, and absolutely no response to any keyboard input - have to hard-shutdown by holding down the power button. I've read that the problem is with the Ubuntu kernel, and that installing/compiling 2.6.33 fixes the issue, but causes other ones.
View 4 Replies
View Related
Mar 12, 2010
I am pretty new to Linux, but this can't be the way the system is supposed to operate.
Fedora 12
KDE 4.4
kernel 2.6.32.9-70.fc12.i686
Toshiba satellite L305D
As of updating KDE to 4.4 and a kernel update from two weekends ago hibernate/resume works perfectly. The problem is I feel that all terminals should be locked/logged out automatically upon suspend/hibernate. Through bug reporting at KDE found that an additional setting is required in KDE to lock the desktop before suspend/hibernate. But any of my other terminals that are logged in remain logged in upon resume. Is there an additional setting that I have to flip to secure the terminals? Would this be considered a security hole? Is there anything short of me manually logging out that I can do to automate locking/logging my terminals?
View 1 Replies
View Related
Mar 13, 2011
The good news: 11.4 seems to have much better support for my radeon graphics driver which makes many of my workarounds for 11.3 unnecessary
The bad news: whereas previously for 11.2, 11.3 using traditional ifup meant that I could easily restore internet (either wlan0 or eth0) with ifdown/ifup now this seems to have no effect. I haven't investigated further yet since without internet on hibernate or suspend 11.4 is not my grub of choice at the moment
There seem to be quite a few glitches with the 'stable' release of 11.4 but this seems to be the main problem for me. (Minimizing the beta 4 Firefox windows closing them is another...)
View 4 Replies
View Related
Aug 30, 2010
After I resume from hibernate with my cpu frequency manually set to the highest settings (2ghz) the network manager shows not wifi APs. "wlan0" shows under both ifconfig and iwconfig but "iwlist wlan0 scan" says no results. "sudo iwlist wlan0 scan" also says no results. I've tried rmmod then modprobe with no luck. Rebooting is the only way I can get WiFi working.
I can get wifi working again by:
- rebooting
- changing the cpu scaling to a lower setting then hibernate/resume
- changing the cpu scaling to a lower setting then 'sudo rmmod ath9k; sudo modprobe ath9k;'
I am using Ubuntu 10.04 with Atheros ar5008 (AR5BXB72) using ath9k drives
Code:
$ lspci |grep Atheros
0e:00.0 Network controller: Atheros Communications Inc. AR5008 Wireless Network Adapter (rev 01)
Code:
$ uname -r
2.6.32-24-generic
View 9 Replies
View Related
Jul 9, 2011
I have problem with resuming after hibernate, it is about 50% chance that computer restart when I want resume, then it starts boot normally and all my work is lost.
Acer aspire 3820tg
Ubuntu 11.04
Builtin hibernate on partition
I try uswsusp s2disk ... on resume it always stops in half of process. I used mainly hibernate, but I'm lost now.
View 9 Replies
View Related
Jan 28, 2010
I am looking for a tool in fedora which can hibernate/standby and also resume after a few seconds automatically with a command. If we have that option by default in fedora.
View 1 Replies
View Related
Feb 19, 2011
i dont know why my system dosnt resume from suspend sstate.i it goes in suspend state.it doesnt resume .i have to poweroff then restart it again.and when i get logged in it gives me Following Error: Resume problem: Your system did not appear to resume correctly from Suspend/Hibernate. This may be a driver problem or a hardware problem. Check the GNOME Power Manager Manual for common problems.
do you think it is because of batterry.i have a problem in my By Battery .IN DOS operating system.when i check my battery icon . A red Cross constantly blink on lower right side of the battery and it says (your Battery consider Replacing).i have notice one thing .And My battery timing hias become Decreased. Do you think this Resume problm is cause of battery problm.Or there is some problm in my Os software.
View 3 Replies
View Related
Aug 6, 2010
I am running Squeeze on an older Compaq EVO laptop with radeon graphics.
A few months ago, after an upgrade, suspend and hibernate stopped working. The suspend or hibernate worked fine, but the resume just hung with a black screen. I finally got around to looking into it and found a workaround.
The workaround is to disable Kernel Mode Setting for the radeon. This can be done by adding the boot parameter "radeon.modeset=0" or by editing /etc/modprobe.d/radeon-kms.conf so that it includes the line "options radeon modeset=0".
If you are interested in the details, you can search for problem reports related to radeon kernel mode setting.
View 3 Replies
View Related
Oct 24, 2010
Lost my wireless keyboard and mouse upgrading slackware current.Boot seems to be normal.I just can't login, cause have no keyboard.
View 2 Replies
View Related
May 29, 2010
Laptop 1 is an acer aspire 5570. closing and opening the lid works a few times, after editing acpi_handler.sh, and battery life reporting is ok during this time. then, for no apparent reason, the laptop no longer responds to the lid closing, and no longer seems to be able to read the battery charge state. once this has occurred, the computer will also no longer restart, it tries a few times, with lights flashing and the hd making ugly noises. the only way to extricate the computer from this state is to pull and reinsert the battery.
Laptop 2 is a gateway nv18. suspend/resume with the lid are ok, mostly. the issure here is no display at all in x. but the computer does respond to ctrl-alt-backspace to kill x, with the command prompt returning. still not good. I'm trying a fresh install on the gateway, to see if this was just an installation glitch.
Both laptops performed flawlessly in 13 otherwise.
View 9 Replies
View Related
Feb 5, 2011
slackware-current kernel 2.6.35.10-smp for instance if i just want to connect to wep ap. i done
[code]...
it says waiting for carrier and it just time out, im wondering why i read somwhere that its not working good with slackware 13.1
View 9 Replies
View Related
Jan 22, 2010
I recently upgraded to slackware-current from Slackware 13 via slackroll, and have only encountered one problem. My file manager no longer thumbnails images, and icons (mostly PNG) aren't appearing no matter what GTK theme is set. Running from the command line produces no errors, and when brought up in something else (say feh /path/to/icon.png) it works perfectly. This is the only hitch I have encountered so far. The same thing happens with emoticons in Pidgin. Does anyone know of a fix?
View 5 Replies
View Related
Feb 28, 2011
First time I've done this in awhile Upgrading my Slackware64 -current VM, following the standard routine that has always worked in the past -
Code:
slackpkg clean-system
slackpkg install-new
The clean-system removed 2 packages -
util-linux-ng
eggdbus
Installpkg will no longer work, complaining that the rev command is not found. The problem hit with the removal of util-linux-ng. I cp'd util-linux to ~/. Extracted with tar and executed the doinstall. Fixed.
View 4 Replies
View Related
Mar 22, 2011
after update to slackware current 4 days ago i cant get sound working in wine in starcraf 2 i mean i got sound in instalation but not in game and i get error when i wanna configure sound in winecfg
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element
err:alsa:wine_snd_pcm_recover underrun occurred
err:alsa:wine_snd_pcm_recover underrun occurred
in game i dont got that error but sound dont work btw my sound card is asus xonar essence stx
View 2 Replies
View Related
Jan 5, 2010
I updated my kernel in slackware current but can't install lilo, when i was with my old kernel it gave an error about not finding the sda drives (they were named hda before the upgrade).I booted into the slackware 13.0 dvd and modified fstab and lilo.conf replacing hda with sda but lilo still gives an error of not finding sda drives.How can i install lilo so i can boot into my sistem??
View 14 Replies
View Related
Feb 26, 2011
I've upgraded Slackware-13.1 I had installed to Slackware-Current using a local tree I had download with mirror-slackware-current.sh script, but when I rebooted I could not get the graphics to load. I think it's because I've also modified /etc/groups and add an username after audio: and video: group, but I forgot that and had to remove slackware from the machine.
View 4 Replies
View Related
May 15, 2010
I've tried a few different ways to install the ATI graphics driver "fglrx" to get 3D acceleration.If I try to install using the standard file "ati-driver-installer-10-4-x86.x86_64.run" from the ATI web site it appears to work but then I discover it actually got an error.I saw a reference to ATI requiring 32-bit libraries to install their 64-bit driver. Is there a link or post that explains how to add the 32-bit libraries. Will that solve the problem, or will I just waste more time trying that?
View 6 Replies
View Related
Feb 1, 2011
I use Alien Bob's mirror-slackware-current.sh with an excludes.txt to only download the parts of current that I want. Unfortunately it is not working for part of the exclude.txt file and I am at a loss to know why.
The excludes.txt is
Quote:
slackware64/e
slackware64/f
slackware64/kdei/kde-l10n-ar-4.5.5-noarch-3.txt
slackware64/kdei/kde-l10n-ar-4.5.5-noarch-3.txz
[code]...
This ignores e/ f/ y/ testing/ pasture/ source/ and usb-and-pxe-installers/ It also ignores most of kdei/ and /extra It is meant to ignore most of extra/source and just download the source for flash-player-plugin, but it is ignoring all of extra/source/, however the same syntax is working for kdei/ and extra/.
View 2 Replies
View Related
Mar 16, 2011
I have been using slackware since version 10.1 and really like it. I have never had a problem until lately, version 13.1 has been stable as a rock for me. The first 2 or 3 updates to current ran well but then the problem started. After installation Slackware would get to the splash screen and bring up the first picture of a disk drive then just hang and never go any further. I do have a good burn on the dvd, have checked the md5 and burned at 4x. then slack 13.37 does the same thing. this is on 4 different computers with several different video boards.
View 8 Replies
View Related
Jan 19, 2011
Slackware 13.1 installed clean on a new ThinkPad Edge (version 13 inch with AMD Processor and ATI graphics). I can get most of what I want working fine except for suspend and resume. I read somewhere that I should be using generic rather than huge kernel, so I have done that and scrapped ATI proprietary driver in case that was causing problems, but nothing so far has allowed me to suspend and resume with pm-suspend, acpitool suspend or with KDE suspend command. In all cases the screen blanks and the single ThinkPad red LED goes from on to blinking, but nothing seems to wake the machine up again. I had both suspend and hibernate working fine with Slack 13.1 on an older Lenovo laptop and ubuntu users report on their forums that this laptop does suspend and resume "out of the box" so I feel it must be possible.
View 4 Replies
View Related
Oct 13, 2010
I got this problem ever since the 13.1 slackware64 release this has been annoying for months the slackware64 installed in a vmware workstation guest machine, the problem is that when the host (real pc) entered sleep while it resumes from sleep the guest vmware workstation running slackware64 13.1 the kernel starts to crash and broadcasting error messages inside the Konsole in every single tabs, here I attach the trace of kernel fault in dmesg.txt I hope it will get fixed next slackware64 release.
Quote:
View 4 Replies
View Related
May 6, 2011
Slackware 13.37 is giving me ugly suspend/resume problems.When I suspend to RAM and my laptop wakes up again, I get a corrupt screen flashing like crazy.This happens when I suspend from the console and when in X11; be it by issuing 'echo mem >/sys/power/state' or 'pm-suspend'.Tried the 'save-pci' quirk for 'pm-suspend', no dice.Tried to POST the card with 'vbetool' after resume, no dice. Tried to save/restore vbestate before and after suspend/resume, no dice.What is one supposed to do to get this stuff to work in 2011?Funny thing that suspend-to-disk works as it should.Also, with 12.2 I would pick a VGA mode for the console in 'lilo.conf' and it would freaking stick. Not anymore. Now the 1st half of the boot is performed in my chosen mode (80x30), then it switches to maximum resolution with an idiotically unsightly small font.My laptop is an Acer Aspire 5101 with an ATI Radeon 200M card.Is anyone going thru the same hell or has anyone found a fix?
View 1 Replies
View Related
