General :: Insert Intel I395 Wifi Modules In Debian 6.0 Live DVD?
Feb 19, 2011
i tried the new debian 6.0 live dvd and was so happy or the first time i had debian actually booting and then i was like o.O and what's up with my wireless and i then tried to install and the installer finally told me i need the iwlwifi395 drivers for my wireless so i copied that and now i have the drivers and i don't know how to build them to be like on the live image like straight in there since i boot have my wireless.
View 1 Replies
ADVERTISEMENT
Oct 29, 2010
how to display the modules related to my wifi card, using lsmod all the kernel modules are displayed but I would like to display just the related to my wifi, is there a way to do this?
View 2 Replies
View Related
Sep 13, 2015
I have an intel 7265 AC wireless card. When I try to download something my estimated download time is tripled almost every 5 mins.And when I play an online game from steam (cs:go or dota2) the ping goes to 250-300 ms which generally stays around 80ms. I'm using debian jessie. So far, I've tried turning of the power save mode of the card, changing ISP and router but none of them worked. I have a fairly good internet connection (I'm using it with my other machines without a problem) so I don't think the connection or router is the problem. Below you can find some information about system.
Code: Select all$ lspci | grep Network
03:00.0 Network controller: Intel Corporation Wireless 7265 (rev 59)
Code: Select all$ dmesg | grep iwlwifi
[ 9.236494] iwlwifi 0000:03:00.0: irq 49 for MSI/MSI-X
[ 9.750780] iwlwifi 0000:03:00.0: firmware: direct-loading firmware iwlwifi-7265-9.ucode
[ 9.750971] iwlwifi 0000:03:00.0: loaded firmware version 25.228.9.0 op_mode iwlmvm
[ 9.896465] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
[ 9.896516] iwlwifi 0000:03:00.0: L1 Disabled - LTR Enabled
[code]....
Those are the outputs of the commands I know.
View 10 Replies
View Related
Jun 27, 2014
I have search the web quite a while about issues with the Intel Dual Band Wireless-AC 7260 Wi-Fi/Bluetooth card. It seems plenty of people have trouble (or at least have had trouble) with it. I do have a working connection, device seems recognized etc, but it works only at a very low/annoying speed.I'm running Wheezy backports and I have firmware-iwlwifi ver 0.43 installed (from Debian testing).
Below is some system output
Code: Select all$ uname -v
#1 SMP Debian 3.14.7-1~bpo70+1 (2014-06-21)
$ dmesg | grep iwlwifi
[ 1.784455] iwlwifi 0000:03:00.0: irq 43 for MSI/MSI-X
[ 1.809630] iwlwifi 0000:03:00.0: firmware: direct-loading firmware iwlwifi-7260-9.ucode
[ 1.809713] iwlwifi 0000:03:00.0: loaded firmware version 23.214.9.0 op_mode iwlmvm
[code]...
I'm not sure why modinfo iwlwifi only lists firmware iwlwifi-7260-7.ucude while in dmesg you see iwlwifi-7260-9.ucude loads.
View 2 Replies
View Related
Jun 9, 2015
I've noticed that my wifi connection is significantly slower than my wired connection. Obviously wired is always faster, but when I boot in to windoze or use Mac, the difference between wired and wifi is negligible. I'm running Debian 8 testing on a Lenovo X201 with Intel Corporation Centrino Wireless-N 1000 [Condor Peak] network card.
View 14 Replies
View Related
Jan 2, 2010
I have an Acer Aspire 6930 laptop that I'm setting up for my wife with Debian Lenny. It has an Intel 5100 wireless card. I'd like to get a driver for the card without having to install a new kernel.
View 11 Replies
View Related
May 12, 2015
I have three Toshiba S55 laptops running debian 8 or ubuntu 14.04 with Intel 3160 internal wifi cards.
In a heavily congested WIFI environment all these machines will regularly lose their associations with an ASUS RT-AC68U 802.11AC AP whether running ubuntu 14.04 or debian 8. The AP is 5 feet away.
I have upgraded the 3160 /lib/firmware to the latest available on the Intel website.
The association will generally be lost within 1 to 10 minutes. The behavior is very repeatable.
I have removed all networking tools except for wicd. However, the same behavior is observed using network manager.
If I plug in an rtl8812au based 802.11ac dongle the connection in identical situations lasts forever.
logfile around the problem time:
*** OpenVPN is often the first to notice the link is down
2015-05-11T12:30:07.105004-07:00 s55t ovpn-hitnet[9781]: TLS Error: TLS handshake failed
2015-05-11T12:30:07.105174-07:00 s55t ovpn-hitnet[9781]: SIGUSR1[soft,tls-error] received, process restarting
*** This always follows the failure reported by OpenVPN
2015-05-11T12:30:07.233906-07:00 s55t kernel: [30897.194045] cfg80211: Calling CRDA to update world regulatory domain
2015-05-11T12:30:07.233918-07:00 s55t kernel: [30897.195689] cfg80211: World regulatory domain updated:
2015-05-11T12:30:07.233918-07:00 s55t kernel: [30897.195691] cfg80211: DFS Master region: unset
[Code]....
View 14 Replies
View Related
Feb 5, 2015
My wifi does not work in the actual debian testing jessie lxde amd64 with wicd version (fresh install). What I've done:
0. Fresh testing jessie install (offline and ignored the question for adding iwlwifi)
1. Adding following sources:
deb http://ftp.de.debian.org/debian/ jessie main contrib non-free
deb-src http://ftp.de.debian.org/debian/ jessie main contrib non-free
deb http://security.debian.org/ jessie/updates main contrib non-free
deb-src http://security.debian.org/ jessie/updates main contrib non-free
2. apt-get update
3. apt-get install firmware-iwlwifi
4. modprobe -r iwlwifi ; modprobe iwlwifi
So searching the web just brings up the wheezy way solution (backport new kernel and iwlwifi).
But in this case, actual jessie testing kernel is already installed by default and so the actual 43 firmware-iwlwifi
Some information:
Code: Select all# dpkg -l |grep -i iwlwifi
ii firmware-iwlwifi 0.43 all Binary firmware for Intel Wireless cards
Code: Select all# dmesg | grep wifi
[ 7.890216] iwlwifi 0000:02:00.0: irq 107 for MSI/MSI-X
[ 8.478878] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-7260-9.ucode
[ 8.479867] iwlwifi 0000:02:00.0: loaded firmware version 23.214.9.0 op_mode iwlmvm
[ 8.553105] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
[ 8.553193] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[Code] ....
I must add: lxde Debian uses Wicd, so network-manager is not installed !
Wicd seems to be the problem. After changing to network-manager, everthing is ok.
Next install with the official Jessie release, i will look, why wicd not work out of the box.
View 5 Replies
View Related
Mar 20, 2016
My Lenovo laptop has an Intel Pro 4965 Wifi adapter,here is the "lspci" detection:
03:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61)
So installed the needed "firmware-iwlwifi" kernel module, which is a correct kernel module for this adapter.
Then "modprobe -a iwlwifi"........no complaints !
However,
#iwconfig wlan0
wlan0 No such device
and
# lsmod |grep iwlwifi
iwlwifi 87219 0
cfg80211 350041 4 iwl4965,iwlwifi,iwlegacy,mac80211
The wired ethernet is working fine
ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:1e:37:82:ac:72
inet addr:192.168.1.16 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::21e:37ff:fe82:ac72/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code] ....
when I go to "Preferences" "Network Connection" ' "Add" "WI-FI" "Create" "Device MAC Address " box is empty.......no Wi-Fi adapter detected !!!
View 7 Replies
View Related
Sep 27, 2015
I've recently bought a Dell Latitude E4310 off ebay. Wifi chipset is Intel(R) Centrino(R) Advanced-N 6200 AGN. I'm using Debian 8.2 with Gnome 3 and I've installed firmware-iwlwifi.
Wifi shows up in Gnome upper bar, it correctly scans the networks and seems to connect successfully to my home router but internet doesn't work, it doesn't seem able to load any page.
Code: Select alluname -a:
Linux latitudeb 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt11-1+deb8u4 (2015-09-19) x86_64 GNU/Linux
Code: Select allip l:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000
link/ether 5c:26:0a:2e:c4:86 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DORMANT group default qlen 1000
link/ether 58:94:6b:b0:6a:2c brd ff:ff:ff:ff:ff:ff
[Code] ....
View 3 Replies
View Related
Aug 29, 2009
I have only had a few weeks worth of experience with linux, so I'm probably considered a newbie at this but I felt like giving it a shot. I just configured my new Toshiba Satellite A505-S6969 to jaunty. Most of the transition is going well but I'm stuck with a few issues, one of which is getting my wifi to work. Right now I'm working off of an ethernet cable.spci returns
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port
[code]...
View 3 Replies
View Related
Mar 6, 2010
Installed ubuntu 9.10 dual boot with win7 yesterday. Everything working but Wifi. Wifi works fine with Win7. No Wifi in Ubuntu. Very confused. I have info from the wifi trouble ticket post.There does not seem to be a driver for this card anywhere.
lawrence@lawrence-laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation X58 I/O Hub to ESI Port (rev 13)
00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13)
[code]....
View 9 Replies
View Related
May 15, 2015
I'm was trying to choose between GNOME and KDE for version 8. However both the live DVD's fail to pick up the Wifi card on my system. I am also unable to use certain basic commands such as ifconfig on the live CD. I am completely new to Linux and Debian (of course). Pardon me for the hand holding. This will be my first install of a Linux system.
What steps I can take to ensure that the Wifi card and the network card will be supported - hardware compatibility test maybe? Is there a way to try before installing? This will be a dualboot with Windows 8.1
Wifi card: Ralink RT3290 802.11bgn Wi-Fi Adapter
LAN card: Realtek PCIe GBE Family Controller
View 9 Replies
View Related
May 2, 2010
I have backtrack 4 on vmware player.i have intel (R) wifi 5100 agn wireless card and when i type airmon-ng there is nothing shown on interface..and i have been told i need kernel rebuild..i have kernel 2.6.30.9 so how can rebuild it?
View 10 Replies
View Related
May 4, 2011
I am running (K)Ubuntu Lucid 10.04 64bit on a Dell Latitude E6400, WiFi Card Intel 5100. Never had any problems with networking. Up to about 2 weeks ago. I do realize there have been quite a few posts with this network adaptor, but non really described the problem I have here.
What happens is that suddenly the WiFi LED on the computer stops blinking, the WiFi connection gets disrupted, and the device is not recognized anymore when checking ifconfig. Only cold restarting the machine helps then... it will work for a while (between 1 and 20 minutes) and then crash again.
On Windows 7 the card works perfectly fine. With Ubuntu 11.04 in Live CD mode I have the same effects (connection crashes after a while). Also tried booting an older kernel, no success.
My exact hardware:
Code:
I notived the following problems in /var/log/kern.log
Code:
View 4 Replies
View Related
Mar 29, 2010
i'm realy new in all linux concern, and i dont really have to many problems with ubuntu. But the other day i strted using CDLinux, which is really amazing despite the fact i can't get it connect to the wireless, i know the pass of the signal, i'm not trying to hack it, is a WPA, and i don't really know what i'm doing wrong.
View 6 Replies
View Related
Mar 6, 2011
I want set up VPN on my VPS but when i try to turn on tun/tap i see:
:/lib/modules# modprobe tun
FATAL: Could not load /lib/modules/2.6.18-194.17.1.el5.028stab070.7PAE/modules.dep: No such file or directory
os : debian 5
(folder lib/modules is empty)
View 1 Replies
View Related
Feb 20, 2011
I'm a Linux newbie. Used to use Ubuntu, but I switched to Slackware because I want to learn how Linux works better.
On my Samsung qx410 laptop, I can't connect to the internet. I went to the System Settings -> Network Settings and all the tabs there, but it wouldn't detect any connection, wireless nor wired.
I noticed that the kernel of Slackware 13.1 is out of date, so I tried compiling a newer one, but I couldn't get that to work.
I tried downloading this file: iwlwifi-6050-ucode-41.28.5.1.tgz but even after reading the readme, I had no clue how to go about installing it or even whether it was the right thing to install in the first place.
How can I get my internet working?
View 6 Replies
View Related
Nov 2, 2010
I downloaded a live KDE-CD and will install from that on hard disk. My box has 4 GB RAM so I understand I need a *-pae kernel ("Physical Address Extension") to be able to use the memory fully.
Can I install the kernel e.g. from [URL] via YAST, or does it need other libraries / software as well and so the system becomes unstable, would anybody know?
View 9 Replies
View Related
Jan 5, 2010
I have a system using a Linksys WUSB54B usb wifi adapter that needs the rt2x00/rt2500 modules. Using the fresh install kernel, 2.6.29.6-smp, the modules are there and I get my interface up.
But, when I configure my own kernel, not an smp system, I cannot find the .config option in the menu for rt2x00 network adapter support and the modules are not in /lib/modules/vmlinuz-2.6.29.6-first directory tree after a "make modules_install".
I looked through the configuration menu, but could find no reference to the rt2x00 drivers.
View 4 Replies
View Related
May 11, 2010
I've been trying to load my pcmcia network card driver "xirc2ps_cs" at startup with no success. I have added "modprobe xirc2ps_cs" to the rc.modules file but it doesn't load at startup. Curiously, though, if I execute rc.modules AFTER the machine has booted it will load the modules just fine. Just not during the boot up process. Thinking that hotstart might have been causing problems I've disabled hotstart (chmod -x) temporarilly to remove it from the picture, but there was no change.
View 5 Replies
View Related
May 5, 2010
I was using v 8.10. It came to its end of life and I felt compelled to upgrade. I upgraded to v 9.04. All seemed well, but then I discovered that I had no sound. As a test, I booted up with the v 9.04 CD, using it as a live CD. I had sound, so it seems as though it should be possible for me to have sound from my upgraded v 9.04 too, provided I can make the necessary changes to it.
When using the live CD and opening the volume control, I get as the listed device "HDA ATI SB (Alsa mixer)". That doesn't appear when I open the volume control using my upgraded v 9.04. Instead, it says "Playback: Null Output (PulseAudio mixer)". Also, when I check for loaded modules when using the live CD, I get many with snd in their name, but nary a one when using the upgraded 9.04.
Is there some simple way for me to load the same modules in the upgraded 9.04 as are loaded by the live CD? I tried to figure out the answer to this by reading other threads, but was simply overwhelmed by the volume of material and often wasn't sure to which version of Ubuntu it applied.
View 1 Replies
View Related
Jun 27, 2010
Where I could get Intel 3945abg wifi drivers for ubuntu?P.S. Sorry for wrong forum, but I can't post in networking forum.
View 3 Replies
View Related
Mar 18, 2011
I have just started with Slackware and I have a problem with my wifi. I don't know if I should make more changes to any archive but when I try to start my wifi it doesn't work at all. What I should do? take into consideration that I come from Ubunut, where everything is done beforehand.
View 6 Replies
View Related
Aug 18, 2010
I have some serious trouble getting the Wireless connection working, using Fedora 13 on a Dell XPS M1710 laptop which has an Intel Pro Wireless 3945 ABG adapter. I have previously tried an earlier version of Fedora I think it was version 10, where it worked flawlessly out of the box, but all versions since then, simply wont work properly. I got the Fedora 12 64 bit working at some stage, after using hours and hours trying to get it working, and suddenly it did. Don't know what suddenly made it work, since I haven't made any new changes, just re-checked the old ones. But I needed to use Skype which is only in 32 bit, so I had to reinstall to a 32 bit version, and then couldn't get it working again.
I can get it to work with any Windows version, no problems. I have also tried with PCBSD version 7.x, 8.0 and today I tried the new 8.1 just to see if that worked to, an no problemos, it works perfectly out of the box, I could set it up in 5 minutes, even though I don't have any previous knowledge of PCBSD, other than a few short trial installs.
It has to be said that I am a newbee to any Unix/Linux, so I don't know how to troubleshoot properly, and have only tried a few things which I have picked up from other forums. But unfortunately nothing seems to work. The first thing I did after a clean install was I looked in the Fedora 13 documentation, that says I should check that the NetworkManager is controling the interface, I tried to start up NetworkManager but nothing happens, no reaction what so ever. I tried rebooting and then restarting NetworkManager, but no matter what I try, I won't work, not even if I am using the root account.
I noticed right after the install, that there was a choice of connecting to a hidden network in the lower right corner of the screen, but while I have been trying to get the NetworkManager to work, it has suddenly disappeared (I have disabled SSID broadcast on my Linksys router. I've tried to run lsmod and it seems like the right firmware is running, I think it was called IWL3945 or something like that. I think there were around 3 such modules running, plus a Dell module.
Another important note, before I even touched the the WIFI, I connected to the Internet via my normal fixed LAN connection, and installed all the updates that were available and rebooted the system. I am using an LinkSys WAG354G V2 ADSL router, where I have disabled SSID broadcast. Is there a kind soul out there, who has a good idea of what the problem is, or a good idea of how to troubleshoot it ? since a laptop without a WIFI connection is not of much use to me.
View 2 Replies
View Related
Jan 18, 2010
A friend is trying to rescue some files from his computer because Windows won't boot, so he's making a Live CD. However, he realized that he accidentally downloaded the Intel version of Ubuntu, but he has an AMD processor. Does this matter for a Live session if he's not actually installing anything?
View 2 Replies
View Related
Apr 28, 2011
I cannot run the live CD on my Intel computer (Mobo DG33BU with integrated graphics card).
When I selected in the GRUB screen "Try Ubuntu" or "Install" and hit Enter, the screen goes blank and the system freezes.
I had this issue before with Ubuntu 10.10 and I decided to wait until 11.04 but looks like the issue remains.
View 3 Replies
View Related
Dec 17, 2010
I reinstalled 10.04.(finally) on a single partition mounted as "/". everything went fine until I rebooted, GRUB began loading and then came back with "no modules name found". I found other postings with the same problem,[URL] but this method doesn't work with the Dmraid.
View 6 Replies
View Related
May 30, 2010
I just install F13 yesterday, before that I use F12 and it works well with no problem. The biggest and only problem I have with F13 is wifi network. If I turn on wifi switch before OS start, WIFI LED lights and wireless works. Then I try to turn off switch and turn on again, but the LED doesnt light any more, so wireless is also silent. The bad thing is there are many notifications of kernel crash.
View 5 Replies
View Related
Apr 28, 2011
I'm trying to get my Dell Latitude work with wifi speed >54Mbit/s, and up to now without any success. The router is a Dlink DIR-635, it has 'n' enabled and working (got an apple laptop connecting at 130Mbit/s, can't test the actual throughput though, since it's the only high-speed device).
Here's the device data:
0c:00.0 Network controller: Intel Corporation WiFi Link 5100
Subsystem: Intel Corporation WiFi Link 5100 AGN
Flags: bus master, fast devsel, latency 0, IRQ 43
Memory at f1ffe000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [c8] Power Management version 3
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
[Code]...
I'm running 11.4, added the compat-wireless recently to be able to run the newes firmware (iwlwifi-5000-5.ucode , firmware version 8.83.5.1 build 33692), but still all I get is 54Mbit/s. I'd like to know if ANYONE ever got the 802.11n speed on linux, and in particular with these intel cards.
View 9 Replies
View Related
