Slackware :: NFS Directories Corrupt Or Disappear
Feb 6, 2011
NFS server is on Slackware-current64 and client is on 13.1. The directory being exported is vfat formatted on a firewire drive. I've been accessing this share on the client with Amarok and Juk without incident for a couple of months. Yesterday I decided to try out moc on the client with this setup. After many revisions to fstab options on both the server and client I still get the same result: after a couple of hours running moc post remounting and re-exporting, the directories on the nfs share on the client start disappearing or corrupting.
View 3 Replies
ADVERTISEMENT
May 3, 2011
I have two computers with SATA drives and burners installed, and when I try to burn a DVD or CD on either one it comes out corrupt. I have NO such problems on my older IDE drives. Is there a setting I'm missing? I'm getting sick and tired of making coasters.
View 3 Replies
View Related
Oct 12, 2010
After 2 weeks of work to restore my server to working condition (after a failed HDD) I am facing a very strange problem. Basically, random files (config, scripts, etc) are either going mising or are reverted to original states. Example1: This morning, I went to use VNC to remote login in my server. I couldnt start the VNC server. I used ssh to login and searched for a lock file (.pid) or anything else preventing VNC from starting, only a few minutes later to open rc.local_shutdown and discover that it was only containing:
Code:
#!/bin/sh
#
# /etc/rc.d/rc.local: Local system initialization script.
#
# Put any local startup commands in here. Also, if you have
# anything that needs to be run at shutdown time you can
# make an /etc/rc.d/rc.local_shutdown script and put those
# commands in there.
All my custom commands were gone...
Example2: Yesterday, I was still using my NFS shares to play music and movies. All worked perfectly. A few minutes ago, I tried to mount the NFS shares on my laptop but it did not work. I used ssh again to login in the server and discovered that nfsd was not running. I tried to start it and it said that there were no exports to share (or something like that). I opened /etc/exports and it was PLAIN empty!! However, I had a export.orig file in /etc... SO somehow, something erased my exports file but care to create a backup of it!
Question: What could do such stupid stuff? Hints: I did not install anything. I did not fool around with anything. The server was unpowered between yesterday and today.
View 3 Replies
View Related
Jun 29, 2011
Slackware 13.37, tested on 2 different PC;
affected: mousepad and tcl/tk applications
I am using mousepad and tcl/tk application to view text files with long lines. Sometimes ago I found that some characters (part of line) in long lines disappear. The problem is shown on a very small video. [URL]
View 14 Replies
View Related
Jun 19, 2010
This works on my Slackware64 13.1 using KDE 4.4.4, Conky version 1.8.0. This is a simple .conkyrc tweak that doesn't need feh, it doesn't have the distracting faun shadow-border and most importantly, it doesn't disappear when you click your desktop (On my system anyway). These are the relevant sections to edit:
Code:
own_window_colour black
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
own_window_transparent yes
own_window_argb_130
own_window_type override
own_window yes
I found that getting rid of the own_window_argb_values yes suggested in other fixes and replacing it with a specific alpha and then changing window type to override solved all my issues. I've noticed no bugs or strange happenings. This seems to be a common problem with a lot of workaround solutions. I think this is a much more elegant way. Edit: Not persistant... After 2 reboots it's back to normal.
View 1 Replies
View Related
Aug 3, 2010
I'm running Slackware64 13.1. When I change the bright of my screen, xfce power manager show a info bar. But now it disappear, when I run xfce4-power-manager from a terminal I get this info:
Quote:
Another thing, Slackware don't have cpu governors?
View 7 Replies
View Related
Apr 27, 2010
I am wondering if there is a way to use src2pkg on source directories I have checked out from git? I can't see any such option in the manpage. At the moment it works if I tar it up, but I can't find a way to just use the directory directly.
View 1 Replies
View Related
May 26, 2010
I've upgraded to 13.1 from 13.0 but can't startx. I get this error;
'call to lnusertemp failed (temporary directories full?)'
When I ctl-alt-backspace there are numerous messages including these two;
'/usr/bin/kde4-config: symbol lookup error:/user/lib/libkdecore.so.5:
undefined symbol: _zn9qlistdatadetach3ev.
and
startkde: error: could not locate lnusertemp in /usr/bin/startkde: line
302::command not found.
Linux 13.0 worked OK right out of the "box" so I don't understand why this version has this problem. Was something changed from 13.0 to 13.1?
View 6 Replies
View Related
May 24, 2011
I'm running slackware 13.37 and when looking through the x.org log I see that two directories are missing:
Information[ 68.572] (WW) The directory "/usr/share/fonts/local" does not exist.
Information[ 68.572] Entry deleted from font path.
Information[ 68.572] (WW) The directory "/usr/share/fonts/CID" does not exist.
[code]....
View 3 Replies
View Related
May 12, 2010
I've got following problem: need to burn files which are spread through several directories, have names longer that 32 chars, and the chars like " " (space) nad other strange are allowed in the names of files. The file sizes are about 300 MB up to 1.5 GB (perhaps more). I want to burn .iso images (not on fly). I'm not using any graphical interface, so programs like k3b are not allowed.
View 8 Replies
View Related
Aug 4, 2010
I had a fresh install of Slackware 13.1 up and running. I was looking to use an app which could only run on a gnome distro. So I installed gnomeslackbuild. Ran into dependency hell so I gave up the ghost and decided to reinstall.Re-install resulted in a message "Call to lnusertemp failed(temporary directories full).Had this before a different machine and sorted with another install at the time.Tried this but it keeps coming up with the same message. (4 installs later).Quote:
xset: bad font path element (#23) possible causes are:
Directory does not exist or has wrong permissions
Directory missing fonts.dir
[code]....
View 4 Replies
View Related
Dec 19, 2009
i am in need of linux help. iam at college and i need this back/restore script to pass this final part of an assessment. i require a backup script that will not only backup but also restore files to the relevent directories. e.g. users are instructed to store all wordprocessor files in a directory named wp. so i am needing to create a backup directory and 3 directories within that and some files within the 3 directories and then back them up ot restore them. l know i should/have to do this myself by been trying to get/understand info for the last few days and came up with zero.
View 14 Replies
View Related
May 15, 2011
I want to make a webserver with multiple users allowed to login through SFTP to a specific folder, www.Multiple users are added, lets say user1 and user2, and all of them belonging to the www-data group. The www directory has an owner www-data and a group www-data.
I have used chmod -R 775 on the www folder, but after I try to create a folder test through my SFTP server (using Filezilla) the group of the directory created has only r and x permissions, and I am not able to log in with the second user user2 and create a directory within www/test due to a lack of w permission to the group.
I also tried using chmod 2775 on www directory, but without luck. Can somebody explain to me, how can I make it so that a newly created directory inherits the root directory group permissions?
View 2 Replies
View Related
Mar 23, 2011
I am writing a script, in that my requirement is, if all the fill types stored in one directory from that we need to separate different different directories based on the file types.
for example in a directory(anish). 5 different types files
1- directory
2- .txt files
2- .sh files
like that and my requirement is the (1- directory is moved to one new directory(dir) which we are given in the script)and (2 .txt files are moved to another new directory(test) which we are given in the script)and ( 2 .sh files are moved to another new directory(bash) which we are given in the scrip)finally the directory anish should be empty..using bash script.how it is possible !!
View 7 Replies
View Related
Jan 20, 2010
Is it possible to restrict users to their home directories and allow admins to have different home directories? Essentially I want users to have a folder in /var/www/html/$USER and admins to have either unrestricted access or have their root directory be ./ or /www or /etc. I have is set now so users have access to thier home direcotry but I need to upload web files as admin.
So far I have created:
chroot_list
user_list
[code]....
View 1 Replies
View Related
Sep 21, 2010
So, onto my question. I kind of messed up my desktop computer trying to remove Ubuntu 8.10. I had installed 8.10 as a dual boot with Windows XP a few years back and now wanted to remove it mainly because of my mother, who can BARELY even turn a computer on. Plus, I can't connect to the internet anyway with Ubuntu (I need the Netzero dial up application in windows, since all I have right now is dial up).
Here's what I did. I downloaded the program "MBRFIX" so I could directly fix the mbr inside of Windows XP, since I don't have an XP recovery disc. I downloaded MBRFIX because I needed to get rid of GRUB. I fixed the mbr, and Windows XP directly booted. All was said and good, except Ubuntu still existed. I poked around on the internet and found something that said for me to use the Ubuntu Live CD and go to gpartition. It said to delete the Ubuntu partitions. So, I tried that, but it said something about unmounting something (I honestly don't remember what it said).
So, I continued following instructions. It said if you couldn't delete the partitions, to go to the terminal and type in "sudo swapoff" and then "sudo umount -a". So I did that. A bunch of stuff popped up in the terminal, mainly stuff that said "cannot unmount". I tried to delete the partitions once again, but that still failed. Finally, I just went back to Windows XP. I went to my computer, manage, and deleted the Ubuntu partitions from there. Finally, Ubuntu was gone! Of course, I wanted my 50GB space back on my XP, but I still had no clue how to go about putting that back. ........
View 5 Replies
View Related
Apr 10, 2011
I recently copied about 1TB of videos from one drive to another. Now it seems like my videos(a lot but not all) are choppy or just end up freezing(mkv files seem to be the ones freezing).Is it possible that the transferring of a large amount of data could have damaged my videos?
View 4 Replies
View Related
Jun 26, 2009
I'm having problems with the screen capture utility in Fedora 11. Everytime i capture a screenshot, it looks like this:[url]
I've tried turning off Compiz, but that doesn't do anything. I suspect it may have something to do with the kms (I have an Intel 82855/855GM, which has had issues in beta).
View 1 Replies
View Related
Oct 19, 2009
I was doing some downloads of ISO's to burn & try on another machine. I went to use FF & it wouldn't open. I thought what the heck, I just use it. So in the process of checking I ran it in a terminal & got this error:
Code:
/usr/lib/firefox-3.0.14/run-mozilla.sh: line 131: 2740 Segmentation fault "$prog" ${1+"$@"}
Plus my lvm's were giving me fits so I ran "touch /forcefsck" & it found a bunch of crossed files. In the process of "fixing" I believe that my backup images may have been in that crossed mess as all the 1 of 2 files are "zeroK" files now. I think I have the lvm fixed (for now, as that piece of junk acts up every whipstitch) so how do I get my FF working again?
I tried a "reinstall" with no luck. I found out I have a bigger problem as well. It seems that the "zeroK" file thing got my backups I need to restore my machine to do my homework under my XP & such. Is there a way to recover these files (that I don't know of) or am I screwed like I think? - needless to say, if I have to rebuilt the F10, there won't be any of that LVM junk!
View 3 Replies
View Related
Dec 3, 2009
I go to bed and my computer is fine and working. I come home from work, no signs of a power outage, and my computer has errors regarding a corrupt disk. Drops to Cmd prompt. My problem is that I want to do the proper recovery on it, and my googling doesn't seem to help. All I see is stuff about how FAST fsck is, but no one wants to talk about how to use it. Besides, I better check with people before I mess everything up.
I have the FC12 install disk I used loaded up now, at the cmd prompt. I have my system mounted, an EXT4 LVM. Do I unmount and then run fsdk.ext4 -fp /dev/mapper/vg_mysys-lv_home ? (lv_home is the one reported as corrupt during boot)
View 4 Replies
View Related
Mar 3, 2010
About two days ago, Yum started complaining about having a corrupt RPM db, so I hit google and looked up the procedures for rebuilding the DB, and I think I broke it more than fixed it. Now, when I issue a
Code:
root@BLACKHEARTED ~# yum -y update
Traceback (most recent call last):
File "/usr/bin/yum", line 29, in <module>
yummain.user_main(sys.argv[1:], exit_code=True)
[code]....
View 20 Replies
View Related
Apr 9, 2010
I have a dual boot windows xp/ubuntu64 9.04 rig at home. Ubuntu is installed alongside windows(if i worded that correctly?). well last night i got the infamous error #15. so i popped in the live cd and messed around with grub. well i changed grubs boot to point to h0,5 which is where ubuntu resides and as you can guess i can not boot. i want to change it back to h0,0 or h0,1 however the hard drive is undetected.
I tried windows repair console but same thing cannot detect the drive. I pulled the drive out slipped it in my other machine and still same thing. so my question is how can i go about editing the grub menu.lst if i can't mount the drive?
Maybe i can just install a new grub/mbr? but i cant figure out hot to mount the drive.
View 9 Replies
View Related
Apr 11, 2010
Corrupt Dictionary for Firefox (en-us)(en)? I'm running 3.5.9
View 1 Replies
View Related
Apr 16, 2010
im running beta 2 of 10.04 x64 and ive noticed a problem where for some reason whenever I download a file it always gets corrupt even though its a 100% complete.
Ive tried using wget instead to download the file and that worked fine
ive removed ubufox package and its now working fine
Is anyone else having this problem?
I wanna be 100% sure that its not my fault and is really a bug before I submit it
View 3 Replies
View Related
May 19, 2010
another day, another problem with Ubuntu The day rapidly approaches where I put XP back on this old machine, unfortunately
why Docky's 3D background looks like this?
View 9 Replies
View Related
Aug 18, 2010
I'm running Xubuntu 10.4 and TB 3.0.6 from the repository, and the damndest thing has happened. Thunderbird was working, and then it stopped sending email -- literally from one email to the next. In fact, I didn't even notice it for three hours.
I never got an error message or a timeout or any of the typical problems; rather, I typed the email, hit send, and then it vanished from the screen. I don't get a progress bar on the bottom or a sent message line, and the message doesn't go into the sent folder. I can receive email, and my Internet connection is working.
I tried all the usual stuff -- checking the settings (which I haven't messed with), deleting each of my accounts and putting them back, looking for rogue extensions (again, I didn't add any between the time it worked and it didn't), and uninstalling, purging, reinstalling, etc. I even ran a virus scan.
But it gets weirder. I installed Evolution, and it works fine. And so does Spicebird, which is basically Thunderbird in prettier clothes. So the problem appears to be with the copy of Thunderbird that I have installed, since I haven't heard of anyone else having this problem.
Any thoughts? If this was Windows, I would assume that the software was corrupted or missing a ddl (or whatever), but I've never seen this happen on a Linux system.
View 1 Replies
View Related
Oct 27, 2010
I'm trying to install 10.10 Alternate AMD64 on a laptop (eMachines e510) in order to then install a minimal desktop.I haven't found anything about this issue outside of this page, which describes the problem I encounter well: [URL]It basically happens right when the base system installation starts.The link shows screenshots of it.I tried burning a CD at minimum speed, and the CD check indeed says the files are corrupt.
View 6 Replies
View Related
Jan 19, 2011
I think my upgrade from 10.04 to 10.10 got corrupted. The update manager got half way through upgrading the system and then complained about some dependency. I forgot I hadn't closed the update manager and ran synaptic with it still open to update some packages. In any case I think the system got in a mess as
Code:
cat /etc/issue
gives
Code:
Ubuntu 10.10
[Code]...
View 6 Replies
View Related
Jun 13, 2011
I've just tried to open an .odt file which says it's corrupt and cannot be recovered... The last backup I can find is from about a month ago and is 10,000 words shorter than the corrupt version.I have no idea why the file has suddenly become corrupt
View 3 Replies
View Related
May 7, 2010
A drive in a RAID array failed and as a result one of the partitions held on the LVM has corrupted. The result of LVS is below.
Code:
[root@brassxen3 ~]# lvs
LV VG Attr LSize Origin Snap% Move Log Copy% Convert
MGT VG_XenStorage-511bee02-d169-b418-6a9e-a88b7e3ce939 -wi--- 4.00M
[Code]....
This partition belongs to a virtual machine, the partition is not visible when booting this VM using a live CD or attaching it to another VM. When booting anything with this partition attached it takes hours to boot.
View 3 Replies
View Related
