Slackware :: Internet Dropping For Short Burst
Jan 1, 2010
I'm running Slackware 64 on an HP AMD Turion X2 Dual Boot with Vista. I'm using WICD from KDE 4.?. I am having trouble with my internet connection dropping. Any software that it internet based seems to hang. After 45 to 90 sec the net seems to come back up. If the software doesn't hang I've been able to check WICD and the connection appears to be fine, but it isn't very descriptive, just that I am still connected. It can be an inconvenience for Firefox but is horrible for any online game.
The game drops you in the middle of a fight or lock the game up. I don't know that I've always had this issue but I can't recall these inconveniences at the beginning of my Slack install. I also can't make a connection to a given install or system tweak. Lastly I haven't seen anything in my searches on the net. But hopefully this isn't the only incidence. AND much as I hate to say this, I am not seeing this from Vista and my family has been on line all week from Windows and aren't having the issue.
View 5 Replies
ADVERTISEMENT
Apr 28, 2011
I'm using a short script when I download the Slackware-(current) packages.
Since it works for me I want to share it. I've added a configurationfile, so anyone can adapt it to his/her requirements.
Note: I don't want to prevent anyone from buying the official DVD, but maybe you'll find it usefull to download the packages when performing a fresh install of current.
Advantage of the script is that one has less downloadsize and one can exclude package-series from downloading (in the conf-file).
Here is the configfile, it has to be saved as "getslack.conf" in the same directory as the script.
Code:
For the installation I use the bootable usb-image or create a minimal install-CD (CD1 without any packages) like here ftp://ftp.gwdg.de/pub/linux/slackwar...nux/README.TXT explained.
View 1 Replies
View Related
May 2, 2010
I just noticed, that the fanfare that signals a successfully finished burn process in K3B is interrupted after the first three tones. How can I get back the fanfare in full length?
I am on Slackware64-current with all updates up to 2nd May, 2010.
View 2 Replies
View Related
Jan 4, 2010
I'm using Ubuntu 9.04 64 bit on an Asus laptop and the wireless connection disconnects randomly for a while and keeps searching for the signal. When it finds it I have to put in my WEP key again to get it to connect sometimes only once or sometimes 2 or 3 times. This is getting quite annoying.
View 9 Replies
View Related
Feb 17, 2010
This is weird. I will be working on the internet with several tabs open and all of a sudden the pages won't update. I can't go anywhere - it's like I lost the connection. I am also downloading bittorrents with uTorrent running with WIne and that doesn't seem to be affected. I also have gPodder and I tried to update podcasts with that and it also hangs up as if it can't connect. The only way I have been able to solve this has been to reboot (which I just did).
View 3 Replies
View Related
Sep 26, 2010
I am running F13 on my Desktop (with a Ralink RT2870 wireless card) and also on my Laptop (Acer Aspire 5738Z) and am connecting to the internet via a NetGear router. On my Laptop I can connect to the internet fine with no problems. However on my Desktop when I turn my computer on it connects to the internet fine, and works, however after some time (maybe 5-10 minutes) it disconnects and the box asking for the password reappears, then I click connect but no joy.
The connection box just keeps reappearing and it won't connect again until I restart the computer (although sometimes it takes more than 1 restart!). This is not a signal issue, as my Desktop also has a Windows partition and that connects to the internet fine and does not drop off. I have installed the RT2870 driver through rpmfusion, which didn't fix the problem, although uninstalling the driver didn't stop the card from working.
View 1 Replies
View Related
Oct 17, 2010
I usually start up my Internet service by typing ./rc.inet1. While its connecting I usually see my routers ip address then I connect and I start browsing and everything is fine. A few times I noticed that instead of seeing the routers address it showed some other address and I could not get online. I try ./rc.inet1 stop and renew but still cannot connect, I reboot and I then see the router and I can connect. I am using slackware13, and opera10 browser.
View 6 Replies
View Related
Jul 16, 2011
wicd keeps dropping my wifi connection most of the time I can just tell wicd to reconnect the connection never stays up for more than 10 minuets with out doing other times it looks like it connected when it didn't other times it times out when obtaining the ip address in these 2 cases I have to run "etc/rc.d/rc.wicd restart
then tell it to connect sometimes posting on forums requires me to copy my text hit submit hope the connection is still up maybe restart wicd reconnect.is there a bug in wicd or python ?
View 14 Replies
View Related
Jun 7, 2011
I just finished my third edit of an article/tutorial I wrote on setting up RSA keys in OpenSSH and configuring SSHD to be a bit more secure than a fresh out of the box install. I also removed any derogatories about sudu Linux that might have been there Anyway, since it's kind of a big deal for anyone who uses it, and could potentially lock them out of their boxes I'd appreciate any comments related to the accuracy of the instructions, if you don't mind [URL]
View 10 Replies
View Related
Aug 20, 2010
I just started using Skype and I am having a problem with the incoming/outgoing audio dropping out. The videoconference will start normal the connection being perfect. The guys on the other end can see me perfectly and can hear me loud and clear for the first say...10-20 secs but afterwards the outgoing audio from my part is dropping off and they can not hear me anymore. They can still see me. I can still be seen on the other end and typing and the share screen works perfect from my part or from their part but they can not hear me anymore..
Or there are days when it goes the other way round. The incoming sound would be dropping out. I can still be seen and heard on the other end and typing and the share screen works prefect but I am not able to hear them. I am using Slackware 13.1 on a XFCE desktop installed from the official DVD downloaded from the official site and the sound works perfect. I have no problem watching videos and hearing the sound in ..... or any other audio-video streaming sites.
View 1 Replies
View Related
Jan 22, 2011
I wanted to save a bit of ram and so removed wicd from startup. I deleted rc.wireless.conf and edited rc.inet1.conf as per the instructions. A connection is made at startup but it seem to drop quite often ( not too hard to restart, but a bit of a pain ). I am running a k-2.6.37 with a zydas usb zd1121 chip
Quote:
# /etc/rc.d/rc.inet1.conf
#
# This file contains the configuration settings for network interfaces.
# If USE_DHCP[interface] is set to "yes", this overrides any other settings.
[Code].....
View 3 Replies
View Related
Feb 25, 2010
As soon as i'm starting to copy a large file enough file (>700Mb) to my ubuntu box (connected to an Asus router via wifi) from a Windows 7 client (connected to router via ethernet cable) i get a dramatic drop in speed. upload starts at 1,0Mb/sec with a ping to ubuntu box at <1ms, and in 2 minutes it drops to 200kb/sec with a ping of over 1000ms! The ping increases with every second in a linear progression.
To exlude router as a possible problem copying to a windows 7 notebook connected to router via wifi results in an average of 2,7Mb/sec with an average ping of 150ms.
MB Model: Asus P5B Deluxe wifi
OS: Ubuntu Server 9.10 + desktop installed
Wifi configured via GUI
2. lsusb
3. wlan0
4. lsmod
View 2 Replies
View Related
Aug 2, 2010
Though under Windows my Internet connection works fine and fluent under Debian linux it connects and disconnects repeatedly at short amounts of time. It didn't used to be like that but at a certain time i was forced to install pppoeconf to get my DSL internet connection going, after that even if i've uninstall pppoeconf and now i'm only using nm-applet to monitor my internet connection i still have this annoying problem.
View 1 Replies
View Related
May 26, 2011
Trying to run Tor and it keeps coming back with the error,
Quote:
I've tried two different libevent packages, one I build myself from SlackBuilds.org, and both return the same error.
View 6 Replies
View Related
Apr 11, 2010
does Slackware 13 64 come with internet proxy server? Or I need to download Squid separately?
View 2 Replies
View Related
Jun 17, 2011
I'm having some trouble getting my new copy of slackware connected to the internet. I'm new to slackware, so I'm not sure where to begin troubleshooting. So far, I've run netconfig and tried to set up a DHCP and a Static-IP connection, both to no avail. I know my internet connection is working since I'm currently using the same box with a hard-drive that has crunchbang on it. I've read chapter 5 of the slackbook up to the section on PPP and have thus far gotten lost in my /etc/rc.d folder looking at lottsa neat files.
Using ifconfig -a gives me information about an eth0, an eth1, and a lo connection thing. From what I understand from the book, this means that slackware has registered my network card but does not have the right configuration necessary to connect.
I tried getting information about my connection from crunchbang, which was as simple as right-clicking a certain icon and copying down my interface, hardware address, driver, speed, security, ip address, broadcast address, subnet mask, default route, and primairy DNS. Since setting up DHCP didn't work after startup, I assumed I was using static I.P. I put in my IP address, mask, default route, and DNS, but it has not yet connected.
View 14 Replies
View Related
Apr 25, 2011
I can't connect to Internet on Slackware. I've blacklisted the modules rt2800usb, rt2x00usb and rt2x00lib in /etc/modprobe.d/blacklist.conf.
View 6 Replies
View Related
Nov 20, 2010
I installed slackware on my pc and before i had internet (last time) But i have run networkconfig and nothing has changed. If anybody could help that would be awesome. Is there something i can do different from when i install.
View 14 Replies
View Related
Nov 18, 2009
I'm attempting to make an install of Slackware 13 connect to the internet using an Ethernet card plugged into an Ethernet to wireless converter to use 802.11g. The converter makes it like plugging any Ethernet card directly into my internet gateway/router after the converter is set up to access it once. It works for the same computer when using Windows ME installed on another partition or booting an Ubuntu 8.04.3 live cd. It also works plugging the same converter into another computer with Windows XP. So I doubt the converter is the problem.
I I've checked in rc.modules-2.6.29.6-smp under the Ethernet card section and everything was commented out. In Windows ME it said my Ethernet card is en1207d-tx. Some Googling of that led me to trying to un-comment out /sbin/modprobe 8139too then failing that /sbin/modprobe tulip with no help. I then pulled the card out and the chip said MPX en5038a1. I couldn't determine any other lines to try un-commenting out from that so I put in a 3com 3c905-tx and un-commented out /sbin/modprobe 3c59x with no help.
I should mention that through Googling I came across something that says if the Ethernet card's address starts with 169.254 "it is not connected OR there is no device on your network giving out automatic IP addresses". I went into K Info Center > Network Interfaces with the MPX card in and 169.254 is what it started with by eth0. I looked after putting in the 3com and there was no eth0 at all. I reinstalled the whole Slackware 13 OS then looked again. It showed the 3com card and it also started with 169.254 .
Also, I tried the network setup during installation and netconfig after with no luck.
Through the use of a long phone line cable, I just tried to boot into Slackware 13 and use Firefox while the computer was connected to the gateway directly with an Ethernet cable with no luck.
View 10 Replies
View Related
Mar 18, 2011
I wanted to try Slackware on VMware just so I would know what it is and the differences between it and others. I installed it in VMware, and I am having two problems:
1. X does not start automatically for some reason.
2. I can't make the internet work. I tried typing knetworkmanager in terminal, but it tells me there is no such command. Then, I typed ifconfig in terminal, and it told me that wasn't a command either.
Did I install something wrong, or does Slackware KDE come with nothing in it?
View 8 Replies
View Related
Oct 10, 2009
I installed slackware 13 in virtualbox (full installation), but I have not internet (ADSL). I tryed adsl-setup, but there aren't that commant. Tryed pppoe-setup, netconfig, but again I have not connection. Where is the problem? And I have one more question about Fluxbox. I have not display, wallpaper, icons...only menus.
View 3 Replies
View Related
Mar 10, 2011
I am a newbie in Slackware. This is my first try to make working system on slackware. I made internet connection by help netconfig. Internet is working but not always. To example I try download page but it doesn't. I push Update page .. and one more time Update page and after 3-4 times my page is downloaded. When I work with windows on this computer, I don't have any problem.
View 3 Replies
View Related
Jul 19, 2011
I installed slackware 13.1 to my laptop.I i use my e220 HSDPA usb dongle to connect internet.I previously i used ubuntu and it auto detected and connect to internet.But i could not connect with slackware .
I tried it and i got following output
Carrier detected. Waiting for prompt.
Don't know what to do! Starting pppd and hoping for the best.
But its not connecting to internet.
View 6 Replies
View Related
Jan 8, 2011
So this has been going on for weeks now. Usually doesnt happen till friday-saturday. My internet breaks down on slackware, im able to play an online video game, and sometimes if i'm lucky, use pidgin to get on Gchat. However other than that, I cannot access the internet. I've tried multiple browsers, resetting my router, and resetting my modem. It's connected through an ethernet cord, and I am getting an IP from my router.
My first thought was that it was a bandwidth limit, but I'm at my house, on a windows computer typing this right now. I'm not an expert on bandwidth caps so maybe it is this. The weird thing is,I have a laptop running slackware as well. Even over wireless it doesnt work.
View 5 Replies
View Related
Apr 23, 2011
I'm new to slackware (and the forums) and I just installed it onto my laptop. I have previously used linux mint, and I like it but I feel that slackware might give me more experience with the terminal, and more original linux ideas. I have kde up and running as far as a window manager, and everything seems to work except connecting to the internet. I have a linksys router. I usually use wifi, but I even tried connecting through an ethernet cord and that didn't work either. I have searched many different threads, but either they didn't address my specific problem, or I couldn't understand what was going on. I tried to configure using "netconfig", but I didn't understand what many of the prompts wanted. I entered a name and a domain name, and selected DHCP, but this did nothing.
View 18 Replies
View Related
Nov 21, 2010
im kind of a novice at this type of thing, but i've gotten into it alot lately (coding that is) I was wondering how i might go about making a boot process that automatically connects to the internet. I've currently got a boot script that connects me to my home network, but will fail if I'm at work/school. so i was thinking there had to be a way to list all possible network connections, and then pick out one of them and automatically connect.Almost completely new to the world of linux.Im running slackware 13.1
I want to make a boot script that automatically identifies wireless networks in the area, and connects to one, I currently have a boot script that connects to my home network automatically but fails at work/schoool. So i figured theres got to be a way to identify networks, pluck one from the list, and use it.
View 8 Replies
View Related
Oct 11, 2010
I have a dual boot Linux system with Ubuntu Hardy 8.04 and Slackware 12.1. I have a USB modem Huawei 1261 that I am using with Ubuntu with the usb_modeswitch package. I would like to get that working with Slackware 12.1. The usb_modeswitch seems to be working fine and also the "wvdial cdma" seems to working but Firefox can't connect to the internet.
View 5 Replies
View Related
Oct 18, 2010
Every now and again my internet drops out for no apparent reason. I try dhcpcd -k eth0/dhcpcd eth0 and nothing. I try modprobe -r <driver> modprobe <driver> dhcpcd blah blah and nothing. /etc/rc.d/rc.inet1/2/d restart. Nothing. The only thing that works is rebooting my system. how to reset my connection without rebooting?
View 7 Replies
View Related
Sep 21, 2010
Does anybody know how to configure a lenovo t60 to use internet?I installed Slackware fresh and I chose not to configure the network when it prompted me during installation. Now I have cable so I ran netconfig and picked DHCP and entered "darkswamp", "darkswamp.org", and I left the last one blank.I can't research how to configure my internet because I don't have internet. I can only come to library to figure it out.
View 14 Replies
View Related
Jan 30, 2011
I got the system installes. But it seems that I can't connect to the internet. Trying to pdate the system via gslapt doesn't work. Always says the repositories can't be reached. I use a home network with a skydsl modem and a router. All my other pc's can connect without a problem. It seems that something is not working right here with my Absolute install. I can't even set up a browser or add the Gnome BSG as said with lynx.
View 14 Replies
View Related
