Ubuntu Networking :: WiFi Dropping And Dropping Speed
Feb 25, 2010
As soon as i'm starting to copy a large file enough file (>700Mb) to my ubuntu box (connected to an Asus router via wifi) from a Windows 7 client (connected to router via ethernet cable) i get a dramatic drop in speed. upload starts at 1,0Mb/sec with a ping to ubuntu box at <1ms, and in 2 minutes it drops to 200kb/sec with a ping of over 1000ms! The ping increases with every second in a linear progression.
To exlude router as a possible problem copying to a windows 7 notebook connected to router via wifi results in an average of 2,7Mb/sec with an average ping of 150ms.
MB Model: Asus P5B Deluxe wifi
OS: Ubuntu Server 9.10 + desktop installed
Wifi configured via GUI
2. lsusb
3. wlan0
4. lsmod
View 2 Replies
ADVERTISEMENT
Jan 5, 2011
Our school has a small 3-computer lab in the preschool department where the kids come in and simply use Firefox to access some educational websites. Due to logistics in the building they're in we had to go with a wireless solution in the following setup:
- Apple Airport Extreme WAP
- 3 HP DX2200 desktops running Ubuntu 10.10
- 3 Trendnet TEW-664UB USB wifi chips
All was running great until we got the computers installed on site and now they are constantly dropping the wifi connection if they are even able to connect at all (which is highly hit or miss).
10.10 picked up the USB wifi card as soon as we plugged them in and showed the available networks, but actually obtaining and keeping connections is a nightmare at the point. The computers are in very close proximity to each other (only about 2-3 feet between computers) and the WAP is in the next room (other computers and mobile devices are able to connect to the WAP with full signal from the same room/location). Thats about all the detail I have off the top of my head, could this be an interference issue with the wifi cards or does this sound like an Ubunutu issue? Again we have had multiple other devices in that room all able to connect seamlessly.
View 7 Replies
View Related
Jan 5, 2010
Here's the situation: I've got an eee pc 901 running Ubuntu 9.10 netbook remix. I'm using it to connect to a WPA-encrypted wireless network on a WRT54GL running dd-wrt. It mostly connects and works ok, but sometimes it just stops working for no apparent reason (the netbook still shows itself as connected), but you can't get anywhere until you manually disconnect and reconnect. Other times, it will drop the connection, and then quickly reconnect (or sometimes not). Obviously, this behavior is pretty irritating. At first I thought the problem was with the router, but I checked the logs there and they all seem fine, and other computers on the same router don't have this problem. Looking at "dmesg | tail" on my netbook, I see a lot of instances of the following error, which I'm thinking is probably the problem:
Code:
[11137.762233] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
[11142.872797] ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 440
[11152.883274] ===>rt_ioctl_giwscan. 5(5) BSS returned, data->length = 556
[11152.883529] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=11)
[11163.952056] ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
I searched for that error message and I found this Ubuntu bug report: [URL] that describes symptoms that match mine. In that report, a poster mentions that he compiled and installed a new version of the wireless driver from the Ralink website, and it fixed his problem. Do you think installing a new driver would be good? Or has that updated driver already been added to the kernel since that bug report was filed? I've never compiled a kernel module before.
One other thing, I also see repeated instances of these lines (or similar ones) in dmesg, which look like they could be related.
Code:
[44096.275923] RX DESC f30ca000 size = 2048
[44096.276885] <-- RTMPAllocTxRxRingMemory, Status=0
[44096.281404] --> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
[44096.281424] 1. Phy Mode = 0
[44096.281435] 2. Phy Mode = 0
[44096.309841] 3. Phy Mode = 0
[44096.314533] MCS Set = 00 00 00 00 00
[44096.316196] <==== RTMPInitialize, Status=0
[44096.316280] 0x1300 = 000a4260
[44096.401269] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=11)
[44096.472502] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 116
[44096.472977] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=11)
[44106.768056] ra0: no IPv6 routers present
View 1 Replies
View Related
Dec 12, 2010
I've got a Belkin F5D8055 v1 wifi usb adapter. I use the rt2800usb driver for it. Strangely it uses only 54 Mbit/s instead of 300 Mbit/s. I thought it was ok, since I use the wifi only for accessing the internet. However, the network manager keeps dropping the signal, and I can't understand why. I'm close enough to the router.
iwconfig:
wlan0 IEEE 802.11bgn ESSID:"MyHomeRouter"
Mode:Managed Frequency:2.447 GHz Access Point: 00:22:2D:06:2C:50
[code]....
View 2 Replies
View Related
Jul 16, 2011
wicd keeps dropping my wifi connection most of the time I can just tell wicd to reconnect the connection never stays up for more than 10 minuets with out doing other times it looks like it connected when it didn't other times it times out when obtaining the ip address in these 2 cases I have to run "etc/rc.d/rc.wicd restart
then tell it to connect sometimes posting on forums requires me to copy my text hit submit hope the connection is still up maybe restart wicd reconnect.is there a bug in wicd or python ?
View 14 Replies
View Related
Jan 5, 2010
In summary, I am using openSUSE 11.2 x64 on an Acer laptop with a wireless AR928X card. I can connect to my WEP-secured network when I boot up. After some time (it might be minutes, it might be hours), I am prompted for my WEP password again. This never works, despite being the one which gets me on-line at start-up!. The only solution is a reboot. The problem is intermittent and doesn't seem to depend on my on-line activity. I have tried the following with the same result:
KNetworkManager
Traditional using IFUP
Enabling / disabling IPv6 support
I tried installing the compat-wireless package through YaST and then managed to get no internet connection at all. Went back to KNetworkManager and things "worked" again until I was prompted for the WEP code. I have openSUSE 11.2 x64 working on my office laptop without problem and can connect to my home network without any problem. My issues are with my personal laptop. I have reached the stage of booting into Windows 7 as my default option so that I can access the internet reliably. What I can do to diagnose and repair the problem - could it be that the card is going into powersave mode? If so, how do I stop that happening? I'd prefer to be on openSUSE but need to be able to rely on the internet.
View 9 Replies
View Related
Jul 1, 2011
I installed ubuntu 11.04 on my dell inspiron mini 10. I replaced windows 7 starter but i want to change back as it keeps dropping my wifi connection.
View 9 Replies
View Related
Dec 1, 2015
I'm trying to use these cookie cutter rules that I found. But every time I use them, after a few seconds my wifi connection goes dead. The exception was the first time I used then. Which lasted me a couple of minutes.
By dead I mean I can no longer open a webpage or ping google.
iptables -N LOGGING
iptables -A INPUT -j LOGGING
iptables -A OUTPUT -j LOGGING
iptables -A LOGGING -m limit --limit 2/min -j LOG --log-prefix "IPTables-Dropped: " --log-level 4
iptables -A LOGGING -j DROP
View 9 Replies
View Related
May 12, 2015
I have three Toshiba S55 laptops running debian 8 or ubuntu 14.04 with Intel 3160 internal wifi cards.
In a heavily congested WIFI environment all these machines will regularly lose their associations with an ASUS RT-AC68U 802.11AC AP whether running ubuntu 14.04 or debian 8. The AP is 5 feet away.
I have upgraded the 3160 /lib/firmware to the latest available on the Intel website.
The association will generally be lost within 1 to 10 minutes. The behavior is very repeatable.
I have removed all networking tools except for wicd. However, the same behavior is observed using network manager.
If I plug in an rtl8812au based 802.11ac dongle the connection in identical situations lasts forever.
logfile around the problem time:
*** OpenVPN is often the first to notice the link is down
2015-05-11T12:30:07.105004-07:00 s55t ovpn-hitnet[9781]: TLS Error: TLS handshake failed
2015-05-11T12:30:07.105174-07:00 s55t ovpn-hitnet[9781]: SIGUSR1[soft,tls-error] received, process restarting
*** This always follows the failure reported by OpenVPN
2015-05-11T12:30:07.233906-07:00 s55t kernel: [30897.194045] cfg80211: Calling CRDA to update world regulatory domain
2015-05-11T12:30:07.233918-07:00 s55t kernel: [30897.195689] cfg80211: World regulatory domain updated:
2015-05-11T12:30:07.233918-07:00 s55t kernel: [30897.195691] cfg80211: DFS Master region: unset
[Code]....
View 14 Replies
View Related
Jan 4, 2010
I'm using Ubuntu 9.04 64 bit on an Asus laptop and the wireless connection disconnects randomly for a while and keeps searching for the signal. When it finds it I have to put in my WEP key again to get it to connect sometimes only once or sometimes 2 or 3 times. This is getting quite annoying.
View 9 Replies
View Related
Jan 30, 2010
Here is the layout of my network:My cable modem plugs into eth0 on my ubuntu server which acts as a firewall (shorewall) and dhcp server to my lan. A dd-wrt access point is plugged into eth1 and then a bridge connecting my xbox360 and another bridge connecting a desktop computer.Everything works pretty well, except a few times a day, my network will just shut down. The wireless on my macbook and my wife's laptop will just shut down, and if my xbox is running, it will lose connectivity. It will be down for maybe a minute or two, and then come back up like nothing ever happened.I never had this problem when I had just a dd-wrt router running everything instead of my server.When I ssh into my server afterwards and run dmesg, this is what I will get:
Code:
[398598.251548] martian source 169.254.1.255 from 169.254.1.33, on dev eth1
[398598.251565] ll header: ff:ff:ff:ff:ff:ff:00:23:69:3d:b1:82:08:00
[code]....
View 2 Replies
View Related
Feb 17, 2010
This is weird. I will be working on the internet with several tabs open and all of a sudden the pages won't update. I can't go anywhere - it's like I lost the connection. I am also downloading bittorrents with uTorrent running with WIne and that doesn't seem to be affected. I also have gPodder and I tried to update podcasts with that and it also hangs up as if it can't connect. The only way I have been able to solve this has been to reboot (which I just did).
View 3 Replies
View Related
Feb 25, 2010
Having major wireless issues with Linux. I have DSL and had a Westell router/modem combo and my wireless would stay up for no more than 15 mins at a time even while idle, and in order to get wireless back I have to reboot and then I can get another 5-15 mins of wireless before it drops. When it drops it prompts me for my wep key and wont accept it yet if I reboot it catches the wireless right away for a very short period. So I go out today and spend over $100 bucks on a Netgear dgn2000 thinking it would fix the problem... Nope I am still in the same boat as I was with the Westell.
I am not seeing my router model listed under the wiki link sticky.. (Edit) thought I installed ndiswrapper, it was it was in my downloads anyway I can't install it I get the following error (Not a valid driver .inf file.)I have tried 3 distros and have the same problem. I went to Netgears site in search of Linux drivers but all I found was the firmware updates. Could some one please shed some light on what I need to do to get up and running?This is a new laptop and I am pretty annoyed with myself for formatting it out of the box rather than reading up a bit more about Linux (been using for one month).I don't understand it Ubuntu 10.9 ran wireless perfect on my older system, (full install) and I have no trouble with my lap top that is running Windows.I really hope to get this resolved I really enjoy Linux and I don't want this to be the one handicap which would force me back to Windows, that would be very upsetting
View 1 Replies
View Related
May 10, 2010
Lately I have been using my window's partition due to the fact that 10.04 drops my wireless signal every 5-10 minutes, but today I downloaded the new updates and that seems to have fix the issue with the dropping of the wireless connection. Now the only problem is the internet is so slow when trying to go to webpages it times out. I have opened up firefox gone to about:config and changed the necessary lines, but still dreadfully slow.
View 2 Replies
View Related
Sep 6, 2010
get this working all of the time instead of the constant dropping that I experience -- i've read a lot of the posts and think i have the right driver installed but there never seems to be a major improvement.Running a p4 2.8 ghz system on lucid and have the most recent kernel installed.Thought I'd give it a last attempt with help before chucking it and getting an adapter that's more compatible
View 2 Replies
View Related
Oct 5, 2010
I'm running ubuntu 10.04 on my laptop with broadcom BCM4322 wireless card.Basically what keeps happening is my wireless will stop working, then network manager will notify me that I have lost signal. It will then try and reconnect, but it never seems to be successful. The only way I can get the wireless to work again is if I disable wireless then re-enable wireless (or do a complete system restart).
However, it does not seem to have this problem at home. The only difference I can think of from home and school is either encryption types (the university uses WEP, I use WPA) or the fact that at home there is only one access point and at university there are multiple access points all with the same SSID.Anyone have any idea how to make my laptop stop dropping connection all the time?
View 1 Replies
View Related
Nov 4, 2010
My wireless connection keeps dropping is very unstable, signal strength goes up and down here is the info i got from the terminal
*-network:0
description: Ethernet interface
product: 82801DB PRO/100 VE (MOB) Ethernet Controller
vendor: Intel Corporation
[Code]....
View 3 Replies
View Related
May 26, 2011
I'm having a problem with the wireless on my Asus EEEPC 1000HE using Ubuntu 110.04. Digging into the laptop forums, it says there is a problem with wireless on some models of the 1000HE, but it is not the same wireless device and my wireless problem doesn't seem as bad as listed, so I think it's a different problem. But my problem is that if wireless drops for any reason, it will not start working again unless I either reboot the computer or click the wireless icon in the systray, click disconnect so it stops flashing (like it's trying to reconnect) and then suspend my computer or log off and back on. And it only does the latter because I added a file located at /etc/pm/config.d/00sleep_module with the one line that reads SUSPEND_MODULES="rt2800pci" (my wireless driver) So that one line seems to cause wireless to get a fresh connection after suspending (or something. I'm not a very advanced LInux user). I've tried running the command "sudo/etc/init.d/networking restart", but that does nothing for me. I'm not sure what other command to try to see if can fix it.[URL]
View 3 Replies
View Related
Jul 7, 2011
My network seems to be dropping every few minutes to few hours. There are a lot of networks in the area (apartment in NYC) and I wonder if it might be due to competing traffic. Any ideas for how to tell what channels other networks are on? or other modifications to router settings that might improve performance in this situation?Additionally the "Invalid Misc" in iwconfig is counting quite quickly.
View 4 Replies
View Related
Jan 1, 2010
Everyone who is experiencing this issue please click the link saying it effects you and add a comment so the bug will get the attention it needs. It seams like many people are facing this issue. [URL]
View 1 Replies
View Related
Feb 20, 2010
I have a windows installation (partition) but have installed into freespace on the same drive using the auto-partition manager, etc, and everything is fine. I got my network going fairly easily by going Preferences > Wireless and inputting SSID and WPA encryption key (PSK). My router issues an WLAN IP, I can get on the net, I can see my other Windows PCs on the network, I can reach my router, and all is good.So after several hours of mooching about and looking at things, I have updated all the Linux packages via Synaptics (following a prompt to update everything) including GRUB. My dual boot now shows two versions of the OS:
GRUB 1.7~Beta4
Ubuntu, Linux 2.6.31-19 - generic (I am booting this one)
Ubuntu, Linux 2.6.31-14 - generic
I also set up my HP F4580 printer over wifi on the network though with slightly incorrect drivers (for the F4400 series as this was recommended at the closest match). It works, and I can print a test page no problem.The only thing is that now (since doing all that) Ubuntu seems to periodically drop my connection to the network and then request the network PSK again, but when I enter it, it spends time trying to renegotiate but fails, and then re-requests the PSK, over and over and it never reconnects. I have to reboot and then I can connect again (automatically), until it drops at some random point (like 5 or 10 mins later)
View 9 Replies
View Related
Mar 3, 2010
When I reboot my computer, my iptables sets itself to a policy of dropping everything, adds a bunch of rules, and a bunch of extra chains, to the effect that (due to everything being set to drop) I can't do anything. I know how to fix this from the terminal to the extent of just clearing most of it and changing the policies back. However, what I don't know is how to make it stay that way. I have a file with the iptables rules I want, so every time I start up I just run iptables-restore, but I don't want to have to do this every time, particularly since others use this computer who do not have admin privileges.
I've tried changing /etc/network/interfaces with the added code pre-up iptables-restore < (etc) But that never does anything, or if it does it just makes stuff work even less. I've tried changing init.d before based on similar info elsewhere, still no luck. I don't know how to get it to stick, and I don't know why it is defaulting to the rules it is, other than that I used a firewall app a while ago and afterwards this was the result, for which I uninstalled that app after no success using it to reverse the damage.
View 2 Replies
View Related
May 13, 2010
Two weeks ago I decided to ditch my XP install completely and switch to Ubuntu 10.04. So far so good, and I'm very happy with my decision. However, about 3 days ago, my wired connection started playing up. It keeps dropping out every 2 hours or so between 13.00 and 04.00. After dropping out, it immediately reconnects again (at least when I use Automatically DCHP config). From 04.00 to 13.00 it is more or less stable.
I tried resolving by reserving an IP in the DCHP Client Table in my router (linksys WRT120N). Additionally, I told the Network Manager to use the Manual configuration. Unfortunately these changes didn't help and the problems stay the same......
The daemon.log shows the following information code...
View 9 Replies
View Related
Dec 27, 2010
Lspci:
05:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12)
My wired LAN keeps dropping randomly, average of every 30-60 minutes. Fresh install of 10.10 from iso, Been installed for about 4 days now, just performed system update today, no change.
My router actually completely resets itself. You can watch the lights power off and recycle doing their POST. Absolutely no problems in windows 7 dual boot configuration.
I am no downloading anything, not streaming, not doing anything actually. My computer is completely idle (save for BOINC) and all of a sudden my phone loses the wireless connection which lets me know that my router just reset.
Ubuntu is actually doing this, my wireless stays up indefinitely in windows. Once the router resets, it does automatically reconnect without a PC reboot, but why is it resetting my router?
If you need the bootscript, already posted here: http://ubuntuforums.org/showthread.php?t=1651262
View 4 Replies
View Related
Jan 10, 2011
I've just loaded the new Hamachi2 Linux beta with Haguichi for a GUI. Everything installed & connects OK, but the connection at the hub is dropping & reconnecting every minute or so. I tried adding a line to the sshd_config file to keep it alaive but it didn't make a difference.
View 3 Replies
View Related
Apr 7, 2009
I had CentOS 5.2 Upgraded to 5.3 -- when will I learn to test more. Anyway, same everything and samba won't stay up. I'm constantly doing service smb restart and then a few seconds later the shares are gone and I have to run smb restart again.
View 3 Replies
View Related
Jan 20, 2010
as the titles states my wireless is dropping out but the networks manager is still saying i have a connection. the only way i have been able to be on the network every minute or so i have to manauly disconnect and reconnect to my wifi. under my windows 7 and vista installs the wireless card works fine now my card is a dlink dwa-547 and it uses the arthores chipset, it is encprtyed wifi, wpa2 aes on a n/g based network
Code:
peter@ubuntu:~$ sudo lshw -C network
*-network
description: Wireless interface
product: AR5008 Wireless Network Adapter
[Code]....
View 8 Replies
View Related
Oct 27, 2010
I have a Thinkpad W500 with:
Code:
Network controller: Intel Corporation Wireless WiFi Link 5300
I have Ubuntu 10.04 32bit installed:
Code:
Linux dani-laptop 2.6.32-25-generic #45-Ubuntu SMP Sat Oct 16 19:48:22 UTC 2010 i686 GNU/Linux
It has been working fine since I installed 10.04 but recently (end of last week I think) it stared dropping the wireless connection very often. So it will disconnect and reconnect, but I can't seem to find a pattern, sometimes it goes for hours without an issue and sometimes it does it several times in a row. Below is an extract of syslogs from when this happens. But not sure if what I need is there... the only weird thing I can see is:
Code:
Oct 27 18:58:33 username-laptop wpa_supplicant[1296]: CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
Code:
Oct 27 18:58:32 username-laptop wpa_supplicant[1296]: Trying to associate with 00:1e:be:a6:c0:0f (SSID='accessp' freq=5280 MHz)
Oct 27 18:58:32 username-laptop NetworkManager: <info> (wlan0): supplicant connection state: completed -> associating
Oct 27 18:58:32 username-laptop kernel: [123835.372217] wlan0: deauthenticating from 00:1e:7a:6f:d9:90 by local choice (reason=3) .....
Oct 27 18:59:29 username-laptop ntpdate[4765]: no server suitable for synchronization found
View 6 Replies
View Related
Dec 7, 2010
I have just switch to Ubuntu on my laptop from Windows 7 and I am experiencing alot of wireless dropping.
The signal itself is full and I am very close to the router.
What could be the issue and how do I go about rectifying it.
Laptop: Dell 13z.
Wireless: Intel 5100 agn
Ubuntu 10.10 x64.
View 5 Replies
View Related
Apr 13, 2011
Within the last couple of days or so, my wireless has been on the fritz. It keeps disconnecting and reconnecting every minute or so, which is annoying to say the least. The information relating to my wireless network is:
Laptop model: Toshiba Satellite L350
Wireless interface: Atheros AR5001 Wireless Network Adapter
Interface:
[code]...
View 3 Replies
View Related
