Slackware :: Ikiwiki Fails To Run - Missing IkiWiki.pm
Jul 8, 2010
Any Slackware users running ikiwiki out there? I built the ikiwiki package via src2pkg and installed it... but the command fails to run. My steps:
1/ Installed the required perl modules using Slackbuilds and cpan2tgz.
2/ Downloaded the ikikwiki source tarball
3/ Used src2pkg to build Slackware pkg of ikiwiki: $ src2pkg -CWD -i='make -i install' ikiwiki_3.20100704.tar.gz it reported a successful build.
4/ Installed pkg:................
View 2 Replies
ADVERTISEMENT
Jun 6, 2010
I've been using linux for several years now, and given that I get banshee running I can completely do away with Micro$ux . But here is where I've run into a bit of a problem. Obviously since I'm running slackware I know that the package manager will not have every program I want. I also know that when I build a package from source there will be some dependencies I do not have, and I need to adapt and overcome. I've been working away at the dependencies for a couple hours, and one is killing me "taglib-sharp 2.0.3.7".
I downloaded that exact package (as it is the newest version) and installed from source (simple "./configure && make && make install"). Worked just fine, seemed to have installed with no errors during make and no missing dependencies during config. That would lead me to believe it installed, however the configure script for banshee is still complaining that it can't find any taglib-sharp at all. So I redownloaded the source and tried again to no avail. Below is the exact output of the banshee config (though it's just as you'd expect).
[Code]...
View 5 Replies
View Related
Apr 26, 2010
using Slackware 13 64bit, 2.6.29.6-smp, KDE desktop. i installed the flash-player-plugin using sbopkg. when i try [URL], it says i'm missing the flash plugin. i copied the. so file to
/usr/lib/mozilla/plugins
/usr/lib64/mozilla/plugins
and i still get the same result. what am i doing wrong?
View 11 Replies
View Related
Feb 1, 2010
The mkfs.msdos symlink seems to be missing in Slackware 13.0 32-bits. However it is there in 64-bits. This: [URL]...e_is_mkfs.vfat
View 2 Replies
View Related
Oct 25, 2009
My girlfriend has just dusted off her Aspire One netbook with Linpus on it. I've tried to update packages and such (eventually got the password changed and such) now I can't update the packages or enable GNOME.
Updating the packages brings up this error:
Code:
And trying to switch to GNOME brings up this error:
Code:
View 2 Replies
View Related
Jan 23, 2011
I am using Firefox-4.0b9 from /testing. I never deleted the old profile from 3.6x days. I just noticed that the Slackware identifier icon is now just a generic Linux icon. I checked in about:config, and the general. useragent.extra.linux string is still set to Slackware Linux.Is there something different to do for FF-4x? This isn't a real problem, just an annoying matter of pride.
View 14 Replies
View Related
Nov 4, 2010
I'm trying to install gazebo but I would like the general solution. When I type "./configure" I get the error: "could not find gdal_priv.h" or sometimes "could not find gdal library" But I have it on my computer. It is: usr/include/gdal/gdal_priv.h This means configure is not looking in the right place for this library. Where is the path stored, please? I tried reading the configure file but I could not find it. I tried to replace all instances of gdal_priv.h by gdal/gdal_priv.h but this did not work either. I tried adding /usr/include/gdal to all the env PATH_something_or_other I could see. how to tell to ./configure where to look for libraries. What file(s) should I edit? (I tried config.status, because it contains /usr/include stuff). The files I have are:
[code]...
View 2 Replies
View Related
Jun 16, 2011
After changing my user's UID number with the "usermod -u" command or otherwise changing the login settings my computer no longer logs in automatically. I can login manually by selecting the "Other" option and manually typing in my user-name and password. However my user-name is gone from the list of users at the login screen or in the Login Screen Settings program.
Other than that my computer seems to function fine. My users details are still listed in "User settings".
View 1 Replies
View Related
Nov 20, 2009
my update today failed, because the packages raydium and maniadrive depend on libphp5-5.2.9.so, which is provided by php-embedded, which is (apparently) not in the fedora 64bit repository There does however seem to be an i586 version...
View 2 Replies
View Related
Jul 12, 2010
I'm having troubles running systemtap scripts. It fails to run with message:
Code:
Checking "/lib/modules/2.6.33.3-85.fc13.i686/build/.config" failed: No such file or directory Ensure kernel development headers & makefiles are installed.
Then I typed:
Code:
$rpm -q kernel kernel-devel kernel-debuginfo
kernel-2.6.33.3-85.fc13.i686
kernel-devel-2.6.33.5-124.fc13.i686
kernel-devel-2.6.33.6-147.fc13.i686
package kernel-debuginfo is not installed
So no kernel-debuginfo, a package which I cannot find in repo. So where to get it and why it's not included in default installation if SystemTap is. It's like having Apache without tcp/ip stack.
View 2 Replies
View Related
Oct 29, 2010
In principle my java installation works perfect now I tried to increase priority with nice. So I put special user rights to nice:
chmod u+s /usr/bin/nice
And then tried:
nice -n -20 java something
but this gives me the error that libjli.so is missing.
View 6 Replies
View Related
Nov 18, 2014
I want to try Debian on my Asus Eee netbook and I'm trying to follow the instructions in URL... But just copying the ISO file to the USB drive then trying to boot from it doesn't seem to work. I just get "Missing operating system".
The Eee can use an external optical drive as well but that failed also. I'm sure I need to do more to prepare the USB drive or CD? Can I prepare the USB Drive or CD on my Windows system, and make it boot on the netbook (which has another Linux distro on it now)?
View 5 Replies
View Related
Feb 19, 2011
I tried to use Totem and Rhythmbox to play an mp3 file but it fails because of a missing decoder. I have found a solution that solve the problem through a repository. Unfortunately, the PC I'm using doesn't have internet connection so I'm looking for another approach. I couldn't find any rpm that would work for CentOS I could copy the my Linux system?
View 14 Replies
View Related
Feb 24, 2010
on ecs gf8100vm-m5 motherboards (which have gf8200 chipset) hardware is detected ok. result from lspi|grep Audio gives
Code:
00:07.0 Audio device: nVidia Corporation MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio (rev a1)
[code]...
View 14 Replies
View Related
Jun 23, 2010
using slakware64 13.1 modified sbo slackbuild for latest version..
View 7 Replies
View Related
Apr 8, 2011
I have the latest fbreader.Slackbuild via sbopkg. The compilation steps seem to run OK until, if I understand this correctly, it starts work on libzlcore, at which point things go wrong :
Code:
OK
The README says I will need liblinebreak, which I "Slackbuilt" with no problems.
View 3 Replies
View Related
Apr 29, 2011
Quote:
Trying to build ffmpeg in 13.37 but it fails with the rror above.
View 3 Replies
View Related
Dec 4, 2010
I'm trying to build/install KDE 4.5.4, but I run into problems with the bindings package. Build fails with the following:
[Code]....
I'm building using the KDE slackbuild from sources dir, with the new KDE packages. edit: Well I decided to just take the risk of a not working KDE and commented out the bindings package. All other packages build fine. After this I crossed my fingers and rebooted, KDE loaded up. I gave the bindings package another go, and to my surprise it did build now. Got KDE up to date and it seems to be running fine.
View 6 Replies
View Related
Oct 22, 2010
here is the output:
[code]...
NVIDIA x86-256.44 fails to build against 2.6.36
View 13 Replies
View Related
May 3, 2011
I think there is a problem with the sox package that comes with Slackware 13.1.I would appreciate any advice. I'm using the same file, 1.wav, in both cases. The output of file 1.wav is1.wav: RIFF (little-endian) data, WAVE audio, Microsoft PCM, 16 bit, stereo 44100 HzOn 12.1, I can runsox 1.wav -e stat 2> /tmp/stat.txt
bash-3.1$ cat /tmp/stat.txt
Samples read: 37096920
Length (seconds): 420.600000
[code]....
View 1 Replies
View Related
Aug 14, 2010
I know this is probably simple, but I have been trying to upgrade to the latest release of Opera, downloaded the Bz2 file, and when running source to package it fails with this error. Opera seems to be the only app this fails with. I got the same error on the previous release as well, so I just gave up and waited until Slackpackage.org finally got that release.
I searched here and the net, and did in fact find a previous post about this, but, truthfully, I didn't understand the explanation at all.
Anyone have any idea how to handle this error?
View 12 Replies
View Related
Apr 22, 2011
"Upgraded" to the 2.6.38.4 kernel this morning and now Truecyrpt fails to mount encyprted files and returns the message:
Quote:
failed to setup loop device, pathtofile
As Truecyprt worked just prior to installing 2.6.38.4, would it be safe to assume there is some sort of conflict?
View 3 Replies
View Related
Nov 17, 2010
usbimg2disk.sh fails when trying to make the USB partition active with sfdisk. I think this is caused by the new default behavior of fdisk (DOS compatible mode=off, default display units=sectors) I got it working again by replacing the sfdisk command with:
Code:
# Set the bootable flag for the first (and only...) partition:
lilo -A $USBDRV 1
I think it would also work to use fdisk commands 'c' and 'u' to switch back to the old behavior
View 6 Replies
View Related
Sep 30, 2010
just curious if there was some discussion about reasons (not)-including Lua in stock Slackware packages ? IMHO it perfectly fits to distro's KISS philosophy, is very small and packaging maintenance is very easy (only glibc dependency, simple compilation and installation proces). Slackware contains programming language implementations of Common Lisp, Guile Scheme, Ada 95 which I find more exotic then Lua in these days. I know there are some histroical reasons and keeping continuity but anyway ...
View 1 Replies
View Related
Jul 16, 2011
I had to restart my machine after some time (~200 days), and after the restart it had only 2 GB ram out of 6 GB (2213MB). I can't go in person to the machine..
View 11 Replies
View Related
Jan 11, 2010
The error has to do with Twolame failing to compile. Which is strange to me because it compiled fine by itself with the slackbuilds build.
The error log is attached.
View 4 Replies
View Related
Apr 21, 2011
I am running Slackware-current 13.37.0 (kernal 2.6.37.6) on my desktop with ATI Radeon X300 video card. I have downloaded the latest driver and installed it successfully with the commands:
But the `aticonfig --initial' fails with the message:
I have already read the "Slackware: ATI SlackBuild (ENG)" from cchtml.com and some of the posts on this forum but couldn't fix the problem.
View 8 Replies
View Related
Feb 14, 2010
I can not get gtkimageview-1.6.4 to build in current. It fails with a number of errors of type:
Code:
gtkanimview.c: In function 'gtk_anim_view_get_type':
/usr/include/glib-2.0/glib/gthread.h:339: error: dereferencing pointer 'value_location.1' does break strict-aliasing rules
/usr/include/glib-2.0/glib/gthread.h:339: note: initialized from here
View 2 Replies
View Related
Jan 8, 2010
I'm using the slackware64 current slackbuild to build a new firefox for -current 32 (I like dynamically linked cairo for fonts). But I am getting a compile error...
c++ -o host_dump_symbols.o -c -O -I./../.. -I. -I. -I../../../../../../dist/include -I../../../../../../dist/include/breakpad_linux_common -I/tmp/mozilla-1.9.1/dist/include/nspr -I/tmp/mozilla-1.9.1/dist/sdk/include -I/tmp/mozilla-1.9.1/dist/include/nspr dump_symbols.cc
[Code]....
View 7 Replies
View Related
Feb 2, 2010
got lmms-0.4.2. slackbuild and after installing all the dependent packages attempted to create the pkg. ./lmms.SlackBuild fails at;
[ 54%] Building CXX object CMakeFiles/lmms.dir/src/core/track.o /usr/bin/c++ -DQT_GUI_LIB -DQT_XML_LIB -DQT_CORE_LIB -O2 -g -fno-exceptions -Wall -ftree-vectorize -O2 -march=i486 -mtune=i686 -fPIC -DPIC -I/usr/lib/qt/include -I/usr/lib/qt/include/QtGui -I/usr/lib/qt/include/QtXml -I/usr/lib/qt/include/QtCore -I/tmp/SBo/lmms-0.4.2/build -I/tmp/SBo/lmms-0.4.2/build/include -I/tmp/SBo/lmms-0.4.2 -I/tmp/SBo/lmms-0.4.2/include -I/usr/include/SDL -
code....
View 3 Replies
View Related
