Slackware :: Usbimg2disk.sh Fails In Current?
Nov 17, 2010
usbimg2disk.sh fails when trying to make the USB partition active with sfdisk. I think this is caused by the new default behavior of fdisk (DOS compatible mode=off, default display units=sectors) I got it working again by replacing the sfdisk command with:
Code:
# Set the bootable flag for the first (and only...) partition:
lilo -A $USBDRV 1
I think it would also work to use fdisk commands 'c' and 'u' to switch back to the old behavior
View 6 Replies
ADVERTISEMENT
Feb 11, 2010
Using 64bit current, I noticed that usbimg2disk.sh fails on dependencies check. It searches for mbr.bin in:
Code:
/usr/lib/syslinux/
but that portion of package now seams to be in:
[code]...
View 1 Replies
View Related
May 27, 2010
Is it possible to load a USB stick so it works as a Slackware bootstick, a dual boot system and Slackware 13.1 installation medium?I'm planning to install 13.1 on a netbook (Samsung NP-N150-KA01IN) which comes with Windows 7 installed and probably an OEM recovery partition (I don't have the netbook yet). In this LQ threaddimm0k asked about keeping the OEM boot system including OEM recovery while being able to dual boot Slackware.samac suggested using a USB stick to control the boot.During Slackware installation there is a step to create a USB bootstick.The netbook does not have a CD/DVD drive so I plan to use Eric Hameleers'usbimg2disk.sh (now part of the Slackware 13.1 distribution).It would be great if all three functions could be combined on single USB stick and it could also carry data files. I would be able to carry a complete "disaster recovery" solution while travelling light.Only downside to this plan is that losing the USB stick would mean only being able to boot Windows 7 I'm happy to put some work into this but don't know where to look for the architecture of the bootstick and can't reverse engineer it not having created one during installation.
View 14 Replies
View Related
Jan 11, 2010
The error has to do with Twolame failing to compile. Which is strange to me because it compiled fine by itself with the slackbuilds build.
The error log is attached.
View 4 Replies
View Related
Feb 14, 2010
I can not get gtkimageview-1.6.4 to build in current. It fails with a number of errors of type:
Code:
gtkanimview.c: In function 'gtk_anim_view_get_type':
/usr/include/glib-2.0/glib/gthread.h:339: error: dereferencing pointer 'value_location.1' does break strict-aliasing rules
/usr/include/glib-2.0/glib/gthread.h:339: note: initialized from here
View 2 Replies
View Related
Jan 8, 2010
I'm using the slackware64 current slackbuild to build a new firefox for -current 32 (I like dynamically linked cairo for fonts). But I am getting a compile error...
c++ -o host_dump_symbols.o -c -O -I./../.. -I. -I. -I../../../../../../dist/include -I../../../../../../dist/include/breakpad_linux_common -I/tmp/mozilla-1.9.1/dist/include/nspr -I/tmp/mozilla-1.9.1/dist/sdk/include -I/tmp/mozilla-1.9.1/dist/include/nspr dump_symbols.cc
[Code]....
View 7 Replies
View Related
Feb 2, 2010
got lmms-0.4.2. slackbuild and after installing all the dependent packages attempted to create the pkg. ./lmms.SlackBuild fails at;
[ 54%] Building CXX object CMakeFiles/lmms.dir/src/core/track.o /usr/bin/c++ -DQT_GUI_LIB -DQT_XML_LIB -DQT_CORE_LIB -O2 -g -fno-exceptions -Wall -ftree-vectorize -O2 -march=i486 -mtune=i686 -fPIC -DPIC -I/usr/lib/qt/include -I/usr/lib/qt/include/QtGui -I/usr/lib/qt/include/QtXml -I/usr/lib/qt/include/QtCore -I/tmp/SBo/lmms-0.4.2/build -I/tmp/SBo/lmms-0.4.2/build/include -I/tmp/SBo/lmms-0.4.2 -I/tmp/SBo/lmms-0.4.2/include -I/usr/include/SDL -
code....
View 3 Replies
View Related
Jan 9, 2010
I was trying to use alien bob's slackbuild mentioned in another thread [url] and it failed everytime, so I tried to do it individually, building dependencies with sbopkg which worked except for Schroedinger and then ffmpeg still fails. I don't have access to the logs or fail messages at this moment, but I'm wondering if it is failing due to the newest gcc-multilib version? I'm also running kernel 2.6.33-rc3 with multilib-current.
View 4 Replies
View Related
Apr 10, 2010
I am trying to build ORBit2 as a dependency for GConf and then google-chrome.
This is a multilib system and I want 32 bit chrome.
Both my 64 bit and compat32 packages are all current as of today per ftp://slackware.mirrors.tds.net/pub/slackware/.
I have edited the Slackbuild as follows:
Code:
The build fails each time with:
Code:
I am using the newest version of ORBit2 as the above indicates, but this is just to see if the newer package would build. The X.X.17 version failed with the same output.
I have run:
Code:
I've had no problems building this package with current in a pure 64 bit environment.
View 4 Replies
View Related
Oct 24, 2010
Lost my wireless keyboard and mouse upgrading slackware current.Boot seems to be normal.I just can't login, cause have no keyboard.
View 2 Replies
View Related
Feb 5, 2011
slackware-current kernel 2.6.35.10-smp for instance if i just want to connect to wep ap. i done
[code]...
it says waiting for carrier and it just time out, im wondering why i read somwhere that its not working good with slackware 13.1
View 9 Replies
View Related
Jan 22, 2010
I recently upgraded to slackware-current from Slackware 13 via slackroll, and have only encountered one problem. My file manager no longer thumbnails images, and icons (mostly PNG) aren't appearing no matter what GTK theme is set. Running from the command line produces no errors, and when brought up in something else (say feh /path/to/icon.png) it works perfectly. This is the only hitch I have encountered so far. The same thing happens with emoticons in Pidgin. Does anyone know of a fix?
View 5 Replies
View Related
Feb 28, 2011
First time I've done this in awhile Upgrading my Slackware64 -current VM, following the standard routine that has always worked in the past -
Code:
slackpkg clean-system
slackpkg install-new
The clean-system removed 2 packages -
util-linux-ng
eggdbus
Installpkg will no longer work, complaining that the rev command is not found. The problem hit with the removal of util-linux-ng. I cp'd util-linux to ~/. Extracted with tar and executed the doinstall. Fixed.
View 4 Replies
View Related
Mar 22, 2011
after update to slackware current 4 days ago i cant get sound working in wine in starcraf 2 i mean i got sound in instalation but not in game and i get error when i wanna configure sound in winecfg
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element
err:alsa:wine_snd_pcm_recover underrun occurred
err:alsa:wine_snd_pcm_recover underrun occurred
in game i dont got that error but sound dont work btw my sound card is asus xonar essence stx
View 2 Replies
View Related
Jan 5, 2010
I updated my kernel in slackware current but can't install lilo, when i was with my old kernel it gave an error about not finding the sda drives (they were named hda before the upgrade).I booted into the slackware 13.0 dvd and modified fstab and lilo.conf replacing hda with sda but lilo still gives an error of not finding sda drives.How can i install lilo so i can boot into my sistem??
View 14 Replies
View Related
Feb 26, 2011
I've upgraded Slackware-13.1 I had installed to Slackware-Current using a local tree I had download with mirror-slackware-current.sh script, but when I rebooted I could not get the graphics to load. I think it's because I've also modified /etc/groups and add an username after audio: and video: group, but I forgot that and had to remove slackware from the machine.
View 4 Replies
View Related
May 15, 2010
I've tried a few different ways to install the ATI graphics driver "fglrx" to get 3D acceleration.If I try to install using the standard file "ati-driver-installer-10-4-x86.x86_64.run" from the ATI web site it appears to work but then I discover it actually got an error.I saw a reference to ATI requiring 32-bit libraries to install their 64-bit driver. Is there a link or post that explains how to add the 32-bit libraries. Will that solve the problem, or will I just waste more time trying that?
View 6 Replies
View Related
Feb 1, 2011
I use Alien Bob's mirror-slackware-current.sh with an excludes.txt to only download the parts of current that I want. Unfortunately it is not working for part of the exclude.txt file and I am at a loss to know why.
The excludes.txt is
Quote:
slackware64/e
slackware64/f
slackware64/kdei/kde-l10n-ar-4.5.5-noarch-3.txt
slackware64/kdei/kde-l10n-ar-4.5.5-noarch-3.txz
[code]...
This ignores e/ f/ y/ testing/ pasture/ source/ and usb-and-pxe-installers/ It also ignores most of kdei/ and /extra It is meant to ignore most of extra/source and just download the source for flash-player-plugin, but it is ignoring all of extra/source/, however the same syntax is working for kdei/ and extra/.
View 2 Replies
View Related
Mar 16, 2011
I have been using slackware since version 10.1 and really like it. I have never had a problem until lately, version 13.1 has been stable as a rock for me. The first 2 or 3 updates to current ran well but then the problem started. After installation Slackware would get to the splash screen and bring up the first picture of a disk drive then just hang and never go any further. I do have a good burn on the dvd, have checked the md5 and burned at 4x. then slack 13.37 does the same thing. this is on 4 different computers with several different video boards.
View 8 Replies
View Related
Mar 22, 2011
This is not an earth-shattering issue, but, something I've recently noticed with the Chatzilla add-on for Seamonkey in Slackware-current. Maybe it is just my problem.If I add Chatzilla to FF 4.0 everything works as expected, that is, when I launch Chatzilla the default start-up window shows up with a list of IRC servers to click on (freenode being my favourite).
However,when I click on Chatzilla in Seamonkey I get a blank window that shows up, there is no server list. I noticed that the window in Chatzilla went blank for Seamonkey recently after a -current update (maybe a library issue?)
View 2 Replies
View Related
Jan 10, 2011
I'm very keen on getting Mumble installed on my slackware -current 64 bit install. I found a slackbuild script for 12.2 here, but changing the version number resulted in failure. I also tried following the build instructions on the Mumble website, which failed with the following.
Code:
neil@slackbox:~/Downloads/mumble/mumble-1.2.2$ qmake -recursive main.pro
Reading /home/neil/Downloads/mumble/mumble-1.2.2/src/mumble11x/mumble11x.pro
WARNING: /home/neil/Downloads/mumble/mumble-1.2.2/src/mumble11x/mumble11x.pro:33: Variable LIBPATH is deprecated; use QMAKE_LIBDIR instead.
WARNING: /home/neil/Downloads/mumble/mumble-1.2.2/src/mumble11x/mumble11x.pro:33: Variable LIBPATH is deprecated; use QMAKE_LIBDIR instead.
[Code]...
View 12 Replies
View Related
Mar 25, 2011
I wish to do a fresh install of Slackware without KDE. I could use my Slackware 13.1 DVD but I thought, why not give -current at try? Is there a -current ISO or must I install 13.1, without KDE, and then upgrade to -current? Or, is it possible to remove 'all things KDE' and then upgrade to -current?
View 8 Replies
View Related
Feb 21, 2011
i just updated my slackware to current, and every time i try to log in in my kde session my desktop is upside down.i mean literally everything is upside down, the only way i can have a usable desktop is with the "fail-safe session" of kde option on kdm which is what i'm using right now.does anybody know how can i solve this?i would post a snapshot of the upside down desktop but i can't do anything when i'm using it. fonts, windows, panels, icons everything is upside down..i solved this, just reinstalled the nvidia drivers and everything is goood again
View 1 Replies
View Related
Feb 25, 2011
I'm running slackware-current in a virtual machine on virtualbox 4, 512 mb ram, 1gb swap.Everything works fine, except the x11 mouse. Xfce will start up fine, and show the 'tips and tricks' dialog, and then freeze. I can't change to a TTY, or click. The mouse moves, but doesn't click.
View 13 Replies
View Related
Jan 24, 2010
I'm trying to take my current windows7 (x64) setup and make it into a dual-boot setup with slackware 13.0 (x32) and am hitting a brickwall. I guess I would like to know if I can salvage the situation without formating my windows drive. I fully intend to, but I had hoped to not do it this month. I'd like to get dual boot going so I can master it and acquire all the files/drivers I'll want and then format and do it 100% right next time.
Currently I have windows setup on a 3x 500gb Raid0 onboard array which itself has been flawless. After I shrunk my current partition size to give me about 25gb of free space I proceeded to setup Linux, and I was unable to perform the cfdisk portion for partitioning the array for Linux.
I tried using cfdisk:
/dev/hdx (a1-a3,b1-b3)
/dev/sdx (a1-a3,b1-b3)
I even attempted to locate with: cat proc/partition and tried using cfdisk on every device it located. It always said it was either an unknown partition table and should I start at zero, or bad partition. I was of course too concerned over my windows setup (which has almost 1tb of stuff I have not backed up) to go any further into the unknown.
PS: I have used Slackware before, back at 8.1, 10, and even a very brief interlude at 12.0, this is my first attempt on this computer however with 13.0, it is currently running fine on my laptop and my PS3 (Laptop is even dual booting 7/Slack13. Albeit without raid)
Phenom 9850
M2N-SLI Deluxe (Nvidia AM2)
4x1gb of 1066 kingston hyperX
3x500gb WD Caviar Black Sata2 3.0
View 3 Replies
View Related
Mar 28, 2011
Saw this Post on LWN this morning:
[URL]
I wonder if it would make sense for Pat and the team to bump the Kernel from 2.6.37.5 to 2.6.38.2 (or 2.6.38.?) before 13.37 is released ?
View 14 Replies
View Related
May 22, 2010
I'm looking for a good IDE for C/C++, that runs well in slackware. I used CodeBlocks, but I can't compile in the current, and its getting a little old. I see a lot of threads talking about anjunta and kdedeveloper, but I don't like these.
View 14 Replies
View Related
Jul 18, 2010
-> Announced in the Changelog.
View 14 Replies
View Related
Jan 2, 2011
Perl 5.12.2 In -current
View 3 Replies
View Related
Oct 18, 2010
I saw that /isolinux / kernel was updated in current. So I thought time to give it a try.
My installition and computer stops after
Parsing Elf OK
Booting Kernel
This seems to happen because the kernel or initrd.img is being overwritten. I solved this in 13.1 with PV's help by inserting the /isolinux and /kernel directory from 13.0 into the 13.1 files before running growisofs.I have again tried all the other suggestions from my previous post with 64-13.1. no success only using isolinux from 13.0 works I am running the current kernel on my main system 2.6.35.7 since the day it was put on kernels.org this was my previous thread on this problem
[URL]
would love to hear some suggestions on this as I just assumed it would be solved for 13.2 or whatever is next where to find the source for the initrd.img used in /isolinux.Possible the rest of the boot source would help. I have been trying to decode what happens on the DVD boot. Looked at arch/x86/boot/compressed/
View 13 Replies
View Related
