Slackware :: KDE 4.5.4 Bindings Build Fails
Dec 4, 2010
I'm trying to build/install KDE 4.5.4, but I run into problems with the bindings package. Build fails with the following:
[Code]....
I'm building using the KDE slackbuild from sources dir, with the new KDE packages. edit: Well I decided to just take the risk of a not working KDE and commented out the bindings package. All other packages build fine. After this I crossed my fingers and rebooted, KDE loaded up. I gave the bindings package another go, and to my surprise it did build now. Got KDE up to date and it seems to be running fine.
View 6 Replies
ADVERTISEMENT
Jun 23, 2010
using slakware64 13.1 modified sbo slackbuild for latest version..
View 7 Replies
View Related
Oct 22, 2010
here is the output:
[code]...
NVIDIA x86-256.44 fails to build against 2.6.36
View 13 Replies
View Related
Feb 14, 2010
I can not get gtkimageview-1.6.4 to build in current. It fails with a number of errors of type:
Code:
gtkanimview.c: In function 'gtk_anim_view_get_type':
/usr/include/glib-2.0/glib/gthread.h:339: error: dereferencing pointer 'value_location.1' does break strict-aliasing rules
/usr/include/glib-2.0/glib/gthread.h:339: note: initialized from here
View 2 Replies
View Related
Mar 4, 2010
I had an issue with the module build for vbox 3.1.2 breaking on the latest kernel ( /etc/rc.d/rc.vboxdrv setup ). Apparently the issue is that a kernel header (autoconf.h ) has changed its location in the module tree and hence the issue.
2 options:
1. upgrade to 3.1.4
2. create a symlink as follows
cd /usr/src/linux/include/linux
ln -s ../generated/autoconf.h autoconf.h
View 12 Replies
View Related
Jun 4, 2010
I've slackware 13.1 and anytime I try the following commands in irb:
Code:
require 'rubygems'
require 'Qt4'
or
Code:
require 'rubygems'
require 'plasma_applet'
i receive the following error:
LoadError: no such file to load -- Qt4
LoadError: no such file to load -- plasma_applet
now I'm wondering what packages or gems I need to make it work?
View 3 Replies
View Related
Sep 24, 2009
as I'm advancing in building some nice rpm I finally wanted to install on of my gems also the build was successful the actual install fails with missing dependencies.
Code:
$ rpm --root /home/sascha/rpmbuild/ -i ./RPMS/x86_64/memcached-1.4.1-2.x86_64.rpm
error: Failed dependencies:
libc.so.6()(64bit) is needed by memcached-1.4.1-2.x86_64
libc.so.6(GLIBC_2.2.5)(64bit) is needed by memcached-1.4.1-2.x86_64
[code]....
View 1 Replies
View Related
Feb 11, 2011
I have an init script running as a special build user which performs an automated build that fails with (Too many open files).I updated /etc/security/limits to allow the special user more open files, but that didn't work - the init script still isn't allowed more open files.Here's a demonstration of the problem;
Code:
$ su - sbsbuild -c "ulimit -n"
Password:
[code]....
View 1 Replies
View Related
Sep 16, 2010
Trying to install SW 13.1 (on DVD) on the following system: M/B Intel: DX38BT Processor Intel Core 2 Quad Q6700 - 2.66GHz, 8MB Cache, 1066MHz FSB, Socket 775 Memory Corsair Dual Channel 8192MB PC10600 DDR3 1333MHz Memory (4x2048MB) Graphics Diamond Radeon HD 3850 Video Card - Viper, 512MB GDDR3, PCI Express 2.0 P/S Ultra 1000W
My goal is to install the i386 build on one partition and the 64-bit build on another. I have been away from Linux for a while and am sick to death of Win7, want to come home. :-}
Booted on i386 side of DVD, system freezes after a couple of lines that start with ATA2. Does not respond to 3 finger salute, ctrl-c, nothing. Have to press reset. I have tried both huge.s and hugesmp.s kernels
Booted on 64-bit side, comes up fine. I performed the install, selected for automatic lilo install. Lilo install hung but I was able to reboot. I booted off the 64-bit side again, entered the following: huge.s root=/dev/sde3 rdinit= ro It booted fully to the login prompt but the keyboard does not work, no input.
View 2 Replies
View Related
Nov 17, 2010
I downloaded from http://ftp.nluug.nl/os/Linux/distr/s...ce/n/net-snmp/ source and I build new package and works ok no errors. If I change net-snmp.SlackBuild and add CFLAGS --with-mib-modules=ucd-snmp/lmSensors --with-ldflags=-lsensors while I need lmsensors support in net-snmp. But the package compiling ends with error:
[Code]...
View 2 Replies
View Related
Mar 4, 2010
recently i have been building my own kernels, and have been successful. however, over the last 2 days, using the proper documentation and methods i always get to the same point that rpmbuild fails at. it's very frustrating to say the least...i am somewhat new to fedora, as i tend to use debian-based systems or freeBSD, where the approach and methodology is quite different to that of redhat. the command used:
rpmbuild -bb --with baseonly --with firmware --without debuginfo --target=`uname -m` kernel.spec
this builds the kernel with modules(needed by me) and this is where it fails:
[Code]...
if anyone has fix let me know, i can't update or upgrade rpmubuild without doing so to my whole system, so i hope this isn't a bug in rpmbuild.... i already had to upgrade yum & yum-utils because of a bug that wouldn't let "builddep" work. (come on fedora, this is a standard release, i shouldn't be having problems with yum or with rpm! this is apart of the OS's core isn't it? anyway, if someone who is in the know has a solution
View 2 Replies
View Related
Jan 24, 2010
I tried to build several packages designed for slackware 13 at slackbuilds. Those was a simple apps like ardour, audacity for example.
[Code]...
My CPU is AMD Phenom 9550 Quad core. It supports 64 bit. My os is slackware 13_64. What do I need to change in slackbuild to create a txz package for those apps?
View 14 Replies
View Related
Jan 9, 2010
I'm trying to move an existing webserver from an old machine to a machine with Fedora 12 installed on it. ThSince the version available in the repository is version 2.X I downloaded the source from apache.org and tried to compile it. I ran configure using the default options and it an without any warnings or errors. However when I run make it fails with the following error:
gcc -c -I../os/unix -I../include -DLINUX=22 -DHAVE_SET_DUMPABLE -DUSE_HSREGEX -DNO_DL_NEEDED `../apaci` htpasswd.c
htpasswd.c:101: error: conflicting types for getline
/usr/include/stdio.h:653: note: previous declaration of getline was here
make[2]: *** [htpasswd.o] Error 1
make[2]: Leaving directory `/root/apache_1.3.41/src/support'
make[1]: *** [build-support] Error 1
make[1]: Leaving directory `/root/apache_1.3.41'
make: *** [build] Error 2
what the problem and more importantly the solution to this problem is?
View 9 Replies
View Related
Feb 18, 2010
I am using my athlon64 machine running Debian squeeze i386 to build some packages optimized for a K6-2 machine. I decided to start with libc6 since most packages depend on it.
I installed the build dependencies via
Code:
apt-get build-dep eglibc
Then, as an unprivileged user, I downloaded the debianized source via
Code:
apt-get source eglibc
I changed to the source directory and ran
Code:
dpkg-buildpackage -rfakeroot -us -us
About 6 hours later, the build failed: [URL]
There were four config.log files:
Code:
./build-tree/i386-xen/config.log
./build-tree/i386-i686/config.log
./build-tree/i386-libc/config.log
./build-tree/i386-amd64/config.log
All of which end with exit status 0. They are also about 1600 lines each so I haven't read them entirely. If someone can tell me which one/ones is/are relevant, I will post it/them to a pastebin.
View 2 Replies
View Related
Apr 17, 2010
Question is: How do I compile a package for little endian on big endian proceessors? Gpart is known to build on arm-el, ia64, i386, and amd64. I'm using gcc 4.3 and have versions 3.4, 4.1, 4.2. Build environment is debian lenny, powerpc.
View 4 Replies
View Related
Aug 2, 2011
I had no problems up to the newest kernel version. But for 2.6.40-4 akmods fails to build the kmod with the following error:
Code:
Building RPM using the command '/usr/bin/akmodsbuild --target x86_64 --kernels 2.6.40-4.fc15.x86_64 /usr/src/akmods/VirtualBox-OSE-kmod.latest'
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/akmodsbuild.yob64XwN/BUILD/VirtualBox-OSE-kmod-4.0.4/_kmod_build_2.6.40-4.fc15.x86_64/vboxnetflt/vboxnetflt.mod.o
LD [M] /tmp/akmodsbuild.yob64XwN/BUILD/VirtualBox-OSE-kmod-4.0.4/_kmod_build_2.6.40-
[Code]...
View 13 Replies
View Related
Feb 13, 2011
Im trying to build Mandrivas theme ia_ora from source but it fails.
Code:
sh install.sh
-- Found Qt-Version 4.7.1 (using /usr/bin/qmake-qt4)
-- Found X11: /usr/lib64/libX11.so
-- Found KDE 4.6 include dir: /usr/include/kde4
-- Found KDE 4.6 library dir: /usr/lib64/kde4/devel
[Code]...
View 2 Replies
View Related
Jul 22, 2010
I'm trying to build the package zaptel on debian, but I'm encountering two errors:
1- When I try to run the "make menuselect" command, I get an error stating that I need ncurses which is missing. I tried to get it installed but didn't get to do it yet.
2- After that, there's the command "make" I think it's to build the package. Yet again this fails, and the error I get is "you do not appear to have the sources for the 2.6.26-2-686 kernel installed".
View 3 Replies
View Related
May 9, 2011
Is there a VLC build for 13.37 x64? I tried Alien's 13.1 build, but the sound was missing.
View 2 Replies
View Related
Apr 3, 2010
I have been trying to build FreeCad and k-3d for Slackware......not much luck...
FreeCad has two build systems... automake and cmake, both fail despite the fact that dependencies are installed...cmake build system fails at about 80% complaining that it cannot find
Quote:
I guess the build system is broken...About K-3d, the thing builds alright..had to install libsig++ glibmm cairomm pangomm and gtkmm as dependencies...
The thing actually builds but when i try to make the installable package, I have to use trackinstall -i="make -i install", but the installable package fails to launch because it cannot find stuff in /usr/share/
View 13 Replies
View Related
Jan 19, 2010
I'll teach here how to build a package for Slackware64 13 This is a multiphysics Finite elements code made by the Finnish check [URL] If their Finite Elements Codes are as "user-friendly" as their gals are, we should all be fine...( Just kidding here, ppl) Now, to work : Download the sources from SVN
[Code]....
View 1 Replies
View Related
Feb 3, 2011
I'm running Ubuntu in a virtualbox VM on windows, and none of the key-bindings that I define for compiz plugins (such as Grid and Put) work. I've tried letters and numbers by themselves, as well as combined with ALT, CTRL, and Super, but all fail.
View 1 Replies
View Related
Feb 22, 2010
I turn on my laptop running 64-bit karmic (if that helps anyone), open GNU Emacs 23.1.1 with the org files I've been working on, and for some reason it is not recognising standard key bindings, for the first time ever, with no reason I can conceive. What does "M-kp-enter is undefined" mean when it seemed well defined not long before? It seems using Esc-enter still works.. can anyone suggest if there are any config files I might need to edit, or what else could have gone wrong?
View 1 Replies
View Related
Sep 1, 2010
I have recently been trying to hack around a MTP plugin for the Exaile music player, but the first hurdle was getting any basic MTP operations to succeed. The following python calls caused a segmentation fault:
Code:
>>> import pymtp
>>> dev = pymtp.MTP()
>>> dev.connect()
>>> tracks = dev.get_tracklisting()
Segmentation fault
I had a look at pymtp 0.0.4.1-1 and I think that it is not in sync with the libmtp8 package (version 1.0.2) I have installed on my xubuntu 10.04 system. I have looked at the libmtp.h file for 1.0.2 and made some changes to pymtp which appear to do the job - no more crash, but I haven't yet tested the other parts of the interface. Feel free to use the attached patched file. I will try to get it to the package owner for further testing and hopefully an eventual package update.
View 1 Replies
View Related
Oct 10, 2010
I've been trying to replace the KDE apps I still use in Fluxbox and I was trying to build epdfview using the Slackbuild. When it had to build its parts that depend on poppler, make crashed. The same thing happened when I tried to build evince. What is going on in my PC? I'm running an updated -current 64 bits. I made screenshots of both errors
View 9 Replies
View Related
Jun 19, 2010
how to build DNS server in linux slackware...
View 4 Replies
View Related
May 25, 2011
Anybody use xemacs with slackware? If so, how did you build or install it? I've used it in the past with other distros. I briefly tried emacs but because I was used to xemacs, gave up on it.
View 2 Replies
View Related
Apr 12, 2010
running current on a Lenovo S10
the b43 driver craps out every few minutes.
so i decided to try the sta driver.
i downloaded the slackbuild but it crashes with the following see attached
View 14 Replies
View Related
Jun 1, 2011
Here are the last several lines from running the Slackbuild script.
Quote:
make: *** [.obj/server.o] Error 1
make: *** Waiting for unfinished jobs....
In file included from /usr/include/libavutil/avutil.h:81:0,
from engine/ffmpeg_enc.h:35,
from slideshow.h:19,
[Code]...
View 4 Replies
View Related
Apr 22, 2011
I've been trying to replace the KDE apps I still use in Fluxbox and I was trying to build epdfview using the Slackbuild. When it had to build its parts that depend on poppler, make crashed. The same thing happened when I tried to build evince. What is going on in my PC? I'm running an updated -current 64 bitsI made screenshots of both errors, which can give you guys more information.
View 7 Replies
View Related
