Slackware :: Alien Bob's VLC Slackbuild Fails On Current / Fix It?
Jan 11, 2010The error has to do with Twolame failing to compile. Which is strange to me because it compiled fine by itself with the slackbuilds build.
The error log is attached.
ADVERTISEMENT
Slackware :: Wine Install Fails At Line 291 - Alien Bob's SlackBuild Script
Jan 30, 2010Using slack 13.0 32-bit.
I'm using [url] with one modification only:
The version number at $SRCVER was changed to 1.1.37
The script has failed with the following error message:
Code:
The code at that line is
Code:
I also have noted the following (in part) outputs previous to the error
Code:
It appears to me that a successful build may have been made at /tmp/build/package-wine/usr But the install has failed.
Slackware :: Lmms Slackbuild Fails With -current?
Feb 2, 2010got lmms-0.4.2. slackbuild and after installing all the dependent packages attempted to create the pkg. ./lmms.SlackBuild fails at;
[ 54%] Building CXX object CMakeFiles/lmms.dir/src/core/track.o /usr/bin/c++ -DQT_GUI_LIB -DQT_XML_LIB -DQT_CORE_LIB -O2 -g -fno-exceptions -Wall -ftree-vectorize -O2 -march=i486 -mtune=i686 -fPIC -DPIC -I/usr/lib/qt/include -I/usr/lib/qt/include/QtGui -I/usr/lib/qt/include/QtXml -I/usr/lib/qt/include/QtCore -I/tmp/SBo/lmms-0.4.2/build -I/tmp/SBo/lmms-0.4.2/build/include -I/tmp/SBo/lmms-0.4.2 -I/tmp/SBo/lmms-0.4.2/include -I/usr/include/SDL -
code....
Slackware :: Ffmpeg Slackbuild Fails In Current Multilib
Jan 9, 2010I was trying to use alien bob's slackbuild mentioned in another thread [url] and it failed everytime, so I tried to do it individually, building dependencies with sbopkg which worked except for Schroedinger and then ffmpeg still fails. I don't have access to the logs or fail messages at this moment, but I'm wondering if it is failing due to the newest gcc-multilib version? I'm also running kernel 2.6.33-rc3 with multilib-current.
View 4 Replies View RelatedSlackware :: ORBit2 Slackbuild Fails When Building 32 Bit Package On Current Multilib
Apr 10, 2010I am trying to build ORBit2 as a dependency for GConf and then google-chrome.
This is a multilib system and I want 32 bit chrome.
Both my 64 bit and compat32 packages are all current as of today per ftp://slackware.mirrors.tds.net/pub/slackware/.
I have edited the Slackbuild as follows:
Code:
The build fails each time with:
Code:
I am using the newest version of ORBit2 as the above indicates, but this is just to see if the newer package would build. The X.X.17 version failed with the same output.
I have run:
Code:
I've had no problems building this package with current in a pure 64 bit environment.
Slackware :: Alien's Vlc, -current And SBo's Libva?
Oct 27, 2010I want to let vlc take use of my Intel HD's H264 hardware decoder. I installed libva with the SlackBuild from SBo. But Alien said libva should match the version vlc built with. So I decided rebuild vlc with new libva.So I changed the LIBVA to 0.31.1-1+sds4 and added --enable-i965-driver to libva's configure. Building was fine but when I opened a flash video(h264) it said that I don't have h264 plugin and refused to continue. After I changed the version number back, vlc can play h264 again.As a compromise, I comment out make_libva in the building phase. All things went well then. It won't consume too much CPU even when play large h264 So what is wrong with new libva? I noticed vlc 1.1.4 was released, but I think Alien is more qualified to bump the version. So I didn't change that.
View 2 Replies View RelatedSlackware :: Recommendations - BIG Changes In Current And Alien Bob's 4.4 Packages?
Mar 1, 2010Best way to go about upgrading current with Eric's 4.4 packages installed. It looks like some of the changes in current are newer versions than what I'm running with the 4.4. packages installed so I'm not real sure of the best path to follow . Would it be better to just blacklist the 4.4. packages and proceed with the upgrade or does somebody else have a better idea?
View 2 Replies View RelatedSlackware :: LMMS Slackbuild Error Current (GCC 4.4.3)?
Jan 30, 2010I am trying to build "LMMS - Linux MultiMedia Studio" on Slackware Current.
CMake is halting on "printf" lines in various .cpp files. I am assuming it's a conflict with the newer GCC? Does anyone know a work around for this issue?
I've tried commenting out the printf lines but I think they may be needed in the application. Apparently there are lots .cpp using the printf call.
Slackware :: Current Refuses To Inkscape Slackbuild?
Dec 8, 2010i clean installed 13.1 x64, then upgraded to -current with no issues. everything seems to compile and run fine, except for inkscape. i downloaded the slackbuilds of inkscape and all its dependencies, and all their dependencies, and installed them in the proper order, however, when i run the inkscape.Slackbuild, it takes like 30minutes and then exits with the following messages:
Code:
...
/usr/lib64/gcc/x86_64-slackware-linux/4.5.1/../../../../lib64/libxslt.so: undefined reference to
[code]....
Slackware :: Slackbuild Failures On -current: Gtkglext 1.2.0 And Celestia 1.6.0?
Nov 18, 2010I've been unable to successfully get a viable Celestia package created under -current with the 13.1 Slackbuild. First off, to build Celestia in the "default" Slackbuild manner, that is to say with the GTK front-end, you need gtkglext. (The Lua package built without issue.) The problem is, gtkglext will not build. It gets to the part of the build where it builds the "scanner" library (I have no idea what this library does in specific), where it successfully compiles, but then fails to link. The newest release of gtkglext is 1.2.0, which is from 2006, so I think that some of the symbols it is looking for when linking against -current's updated GTK libraries are depreciated. Here's the last bit of output from the failed build of gtkglext:
[Code]...
"error: 'abs' is already declared in this scope"?? There's a function or variable being declared twice that can't be right. Maybe two headers use the same variable or function name, and they're winding up in the same scope Like I said, I don't know. Hence, this post. I really like Celestia. I could live with the mystery of why these things won't build, but I can't seem to find any pre-built binary packages out there.
Of course, you can't try the KDE front end, since it will only work with KDE 3.
Slackware :: FBReader Slackbuild Fails ?
Apr 8, 2011I have the latest fbreader.Slackbuild via sbopkg. The compilation steps seem to run OK until, if I understand this correctly, it starts work on libzlcore, at which point things go wrong :
Code:
OK
The README says I will need liblinebreak, which I "Slackbuilt" with no problems.
Slackware :: Ffmpeg Slackbuild Fails In 13.37
Apr 29, 2011Quote:
Trying to build ffmpeg in 13.37 but it fails with the rror above.
Slackware :: Conky SlackBuild Fails - Every Single Time ?
Jul 1, 2010I am trying to build conky from SlackBuilds.org using sbopkg, but the build fails every single time. It may be worth noting that I am trying to build with extra options, namely --disable-x11 --disable-xdamage --disable-own-window --disable-xft.
This is so I can have a cli-only conky that I can pipe to my status bar. This has worked in the past, but now the build is failing with a seemingly unrelated error.
It states:
Code:
At the end of the build. I tried removing the option --enable-audacious, but that only resulted in an error which complained that yet another option (--enable-rss=yes) was a "Command not found". This continues as I remove options. I would like to keep many of those options active as I have a need for certain features.
This is a copy of the SlackBuild being used:
Code:
I have a full install of Slackware64 v13.1, so audacious is installed. I don't know what else could be going wrong, and I don't know why this worked in the past.
Slackware :: Stfl.SlackBuild Fails While Looking For Ncursesw/ncurses.h - 11.0
Sep 23, 2010My system is mostly slack 11.0 (Absolute Linux 11.0 actually) I have been trying to build stfl from SlackBuilds.org. I think I'm missing some ncurses wide stuff but don't know how to compile for ncursesw.
I have stock ncurses5.5 on my system.
Compiler output is:
I have /usr/include/ncurses on my system but not /usr/include/ncursesw/ncurses.h
My goal is to compile newsbeuter but this dependency is in the way.
Slackware :: Id3-0.78 Homepage For Source Code 404 Error - Slackbuild Fails
Dec 19, 2010I am trying to build abcde from slackbuilds.org and include needed packages like id3. When I went to build it I was unable to download the source from [url] and I get a 404 error in dutch. I was wondering if anyone had this issue or if there was another trusted place to grab the source code? I checked the archives of the slackbuilds-user mailing list to see if the issue is already known, but I didn't see anything.
View 3 Replies View RelatedSlackware :: Usbimg2disk.sh Fails In Current?
Nov 17, 2010usbimg2disk.sh fails when trying to make the USB partition active with sfdisk. I think this is caused by the new default behavior of fdisk (DOS compatible mode=off, default display units=sectors) I got it working again by replacing the sfdisk command with:
Code:
# Set the bootable flag for the first (and only...) partition:
lilo -A $USBDRV 1
I think it would also work to use fdisk commands 'c' and 'u' to switch back to the old behavior
Slackware :: Build Fails In Current: Gtkimageview-1.6.4?
Feb 14, 2010I can not get gtkimageview-1.6.4 to build in current. It fails with a number of errors of type:
Code:
gtkanimview.c: In function 'gtk_anim_view_get_type':
/usr/include/glib-2.0/glib/gthread.h:339: error: dereferencing pointer 'value_location.1' does break strict-aliasing rules
/usr/include/glib-2.0/glib/gthread.h:339: note: initialized from here
Slackware :: Firefox Fails To Compile On -current
Jan 8, 2010I'm using the slackware64 current slackbuild to build a new firefox for -current 32 (I like dynamically linked cairo for fonts). But I am getting a compile error...
c++ -o host_dump_symbols.o -c -O -I./../.. -I. -I. -I../../../../../../dist/include -I../../../../../../dist/include/breakpad_linux_common -I/tmp/mozilla-1.9.1/dist/include/nspr -I/tmp/mozilla-1.9.1/dist/sdk/include -I/tmp/mozilla-1.9.1/dist/include/nspr dump_symbols.cc
[Code]....
Ubuntu :: Alien Fails On Conversion Of Rpm Files?
Apr 16, 2010Having downloaded alien for the first time, and attempted to use it to convert an rpm file to a deb file (specifically asymptote located at [URL]), instead I found that it failed to do so. I've searched on google for a long while, and found that while this appears to be a problem encountered by multiple people, but there are no workarounds posted anywhere. Here is the error message that I am getting:
Unpacking of 'asymptote-1.92-1.fc12.i686.rpm' failed at /usr/share/perl5/Alien/Package/Rpm.pm line 153.
I've tried running the following variants of commands and all fail with the same error:
sudo alien --to-deb --scripts --keep-version asymptote-1.92-1.fc12.i686.rpm
sudo alien -d asymptote-1.92-1.fc12.i686.rpm
sudo alien -k asymptote-1.92-1.fc12.i686.rpm
The errors reported by others are on a variety of packages, so it seems to me that it is an bug with alien itself and not with the package, but that is only a guess.
And related to this, Alien is version 8.69, perl 5.8.8 and ubuntu is 8.04.
Slackware :: Install Kde 4.5 From Alien's?
Aug 16, 2010I am using current and want to install kde 4.5 from alien's, here is my problem. I don't understand the statement below. Below are the steps you take to install or upgrade to KDE 4.5.0. First, change your current directory to where you found this README. From within this directory, you run the following commands as root.
On Slackware 32-bit:
# upgradepkg --reinstall --install-new x86/deps/*.t?z
# upgradepkg --reinstall --install-new x86/kde/*.t?z
There is 1 dependent needed and it is installed but I can't figure out how to go any further. Do I need to add him to my mirror list or what?
Slackware :: Download KDE 4.5.1 From Alien Ktown?
Sep 8, 2010We can have now the KDE 4.5.1 in place of 4.5.0 in alien's ktown depositories.I've read the readme file.
Quote:
First, change your current directory to where you found this README.
From within this directory, you run the following commands as root.
On Slackware 32-bit:
# upgradepkg --reinstall --install-new x86/deps/*.t?z
# upgradepkg --reinstall --install-new x86/kde/*.t?z
But I have to download first the 4.5.1 directory from [URL]..
Slackware :: Alien's KDE 4.6RC1 Always Run /usr/bin/strigidaemon After Login
Dec 25, 2010I've disabled the strigi search and "semantic search" in KDE settings but no help. strigidaemon starts every time after I logged in and makes the system slow.(since it scanning the disk, there will a lot of disk IO)
View 13 Replies View RelatedSlackware :: Installed Audacity From Alien Bob's Packages But It Won't Launch?
Oct 27, 2010I just installed Audacity from Alien Bob's packages, but it won't launch.
View 5 Replies View RelatedSlackware :: Tovid And Dependency (x264) - Will It Conflict Alien Bob's VLC?
Jun 10, 2010I'm trying the DVD authoring stuff on Slackware, so okay I have downloaded Tovid along with its dozens of dependencies that has their own dependencies and so on...Now, one of the dependency is x264 (for encoding H264/AVC video streams). I already have alien bob's VLC from the uk site (restricted packages) and I've read on his blog (if I'm not mistaken) that it has the H264 capability (don't know how to describe it ).Is there any chance that it will conflict with this x264 library?
View 2 Replies View RelatedSlackware :: Command To Create Local Mirror Of Alien Bob's Kde4.4.0 Packages?
Feb 10, 2010I know there has to be an easier way to do this than to download each file individually. On an ftp site I would just use
PHP Code...
But with those files being on an HTTP server and wget not supporting HTTP file globbing I'm at a loss.
What is a one step method to recursively download all files in a directory on an HTTP server?
Slackware :: KDE 4.6.0 (from Alien Bob's Ktown Repo), Battery Monitor No Longer Works?
Feb 22, 2011I am running Slackware64 -current. I just upgraded KDE to 4.6.0 from Alien Bob's ktown repo, and upon doing so my battery monitor no longer functions properly. More specifically, the icon will appear in the panel, but when I choose the option to show the charge/discharge state it does not show. The icon only ever shows that the battery is not plugged in to an external power source (showing a plug and a red x). It is important that I get the battery monitor functional once again as I am running my new Slackware64 -current install on a laptop and don't like to be left wondering when my laptop's battery will die and if I need to plug it in.
View 2 Replies View RelatedSlackware :: Can't Get To Slackbuild.org
Jan 10, 2010For the last couple of weeks, I can't seem to reach [URL]... Browser just times out. Here's a traceroute: [URL]...
View 10 Replies View RelatedSlackware :: Why Is There No Slackbuild For 13.1
Jul 5, 2010I am going to try out a tiling wm and I have narrowed my search down to scrotwm and dwm. I installed scrotwm from slackbuilds.org but it did not show up as a selection when I ran xwmconfig? Any ideas as to why? So then I went install dwm from slackbuilds.org but saw there was only a build script for slackware 13 as opposed to 13.1 which is what I am running. So two questions for dwm, one why is there no slackbuild for 13.1, and two when I tried to use the slackbuild for 13 this also didn't show up under xwmconfig, any thoughts?
View 4 Replies View RelatedSlackware :: No Wine Slackbuild For 13.1?
Jun 6, 2010As always, very impressive effort from Slackbuilds.org to get slackbuild scripts updated for 13.1. Thanks to all who maintain these scripts. One which does not seem to have made it to 13.1 so far is a build script for WINE. Anybody know whether this is beacuse of some problem ? Or just an oversight ? The 13.0 script is there - might be OK to just use this with 13.1 ?
View 9 Replies View RelatedSlackware :: OpenEuclide 0.5 Slackbuild For 13.1?
Feb 27, 2011Getting the hang of diff and patch, to a small extent...However, I couldn't get the slack-desc to print anything useful when running installpkg. Always had trouble with the slack-desc files.
[code].....