Slackware :: How To Mount NAS Wireless Device And Access Files?

May 21, 2011

I have a Western Digital My Book World Edition II 2TB http://www.wdc.com/en/products/products.aspx?id=290 set up on my Windows install.how do I access the files from my Slackware box? I have Slack 13.37 64bit installed on a Samsung laptop.

View 8 Replies


ADVERTISEMENT

Slackware :: Cannot Access Anything / Won't Mount Any Of Logical Volumes

Nov 15, 2010

I upgraded aaa_elflibs as per Eric's advice here:URL..Now I can't access anything.it boots into tty1 and won't mount any of my logical volumes.

View 14 Replies View Related

Slackware :: How To Get Wireless Access

Feb 3, 2010

I have an HP DV6 1030us and I am dual booting Windows 7 64bit and Slackware 13.0 64bit. I know there is a Broadcom wireless card and when I go to HP.com it says there are 2 drivers:

Intel PRO/Wireless Drivers for Microsoft Windows 7 10-2009 13.0
>>>> Intel Wireless WiFi Link 5300 Intel Wireless WiFi Link 5100
Broadcom Wireless LAN Driver for Microsoft Windows 7 10-2009 5.60.18.8
>>>> Broadcom 43224AG 802.11 a/b/g/draft-n WiFi Adapter

My question is, how do I get wireless access in Slackware? I already have it set up to work with an wired connection but I really need the wireless access to make the OS functional for me to use.

View 10 Replies View Related

Slackware :: Wireless WPA Can't Connect / "Connection Failed: Could Not Contact The Wireless Access Point"?

Feb 26, 2010

I'm able to configure my Wireless network to connect with an AP with WEP key but...

Now I'm at home, I've a WPA2 key (my router now is supporting both, WPA and WPA2). I used WICD to connect but no success at all! It just stops with "Connection failed: Could not contact the wireless access point"

if I type IWLIST key:

Code:
ra0 2 key sizes: 40, 104bits
4 keys available
[1]: off
[2]: off
[3]: off
[4]: off
code....

View 15 Replies View Related

Slackware :: Wireless Card Currently Idle / Can It Be Used As Access Point?

May 17, 2011

i'm running slack 13.37. my machine has a "generic" wireless card which is currently sitting idle in it, since i used a wired interface for internet and local networking (i used the wireless interface for a while, but for what i need it wasn't a reliable or stable enough connection). my question is, can the idle card be used as a wireless access point on a separate subnet? if so how?

View 1 Replies View Related

Slackware :: How To Access Slack Files Via Live CD

Jan 7, 2011

I was playing around with some files in Slackware and decided to do something stupid for the sake of experimentation. I wouldn't say I screwed something up because I did it intentionally to see what would happen (that's how you learn, right?), but I disabled my login tool. I need to access to the....

View 2 Replies View Related

Ubuntu Networking :: See The Phrase " Device Not Ready" Greyed Out, And Unable To Access A Wireless Network?

Oct 10, 2010

Everytime I to turn on my wireless device, and try to connect to a wireless network, i see the phrase " device not ready" greyed out, and not able to access a wireless network. i do not know what to do

View 6 Replies View Related

Ubuntu :: Fresh 9.10 Install Reboot Error No Device - Mount Partition Mount: Can't Fin?

Jun 24, 2010

what now trying to mount partition get this error this is the partition ubuntu 9.10 is installed on and upon reboot error no device with a long string. mount: can't find /dev/sda6/mnt in /etc/fstab or /etc/mtab

so now that I believe I've successfully mounted the partition how do I direct the bootloader to this partition /dev/sda6 on /media/11076e45-e27d-470b-bb6d-6894f7809a0c type ext4 (rw,nosuid,nodev,uhelper=devkit)

View 1 Replies View Related

Hardware :: Possible To Access An IrDA Device As A Serial Device Such As /dev/ttyUSB0?

May 24, 2011

the message from dmesg for the IrDA device:

[ 3635.194162] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 3635.338159] usb 3-1: New USB device found, idVendor=066f, idProduct=4200
[ 3635.338165] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[code]...

View 1 Replies View Related

OpenSUSE Wireless :: Access Files From When Connected To The Router With The Shareport Utility?

Apr 18, 2010

Is there a way to make the (router's) USB port to work in OpenSUSE? I have a external HD were I would access files from when connected to the router with the shareport utility but it only works on windows. I was wondering if it could work in wine? And how could I do it?

And how can I make a network? I have never made a shared connection between computers. I don't know the correct term but I would like to share files with my brother and sister which I just converted from Ubuntu

View 3 Replies View Related

Slackware :: Wireless Interface On Eth1 - Setup Config Files?

Aug 23, 2010

All rc.inet1 an rc.wireless scripts work well if a wireless extension is on wlan(x). My notebook has Intel Pro 2100 wireless adapter (the ipw2100 module). By the system the card is marked as eth1. If you have a look at rc.inet1(.conf) you see that by default an eth1 has no wireless extensions. how to set up my network.

View 2 Replies View Related

Slackware :: VirtualBox - Windowsxp Guest - No Sound - Unknown Audio Device - In The Windows Device Manager

Mar 11, 2010

For those that use Virtualbox on their slackware host and have a windows (xp) guest running. I have tried various settings for sound (Alsa, PulseAudio), the AC97 drivers are installed in the Windows xp guest os, but there is no sound and there is an unknown audio device (in the windows device manager). If I remove the AC97 drivers and use the soundblaster16 drivers in the Vbox settings there is no unknown sound device, but there's still no sound. why I can't get sound working?

View 13 Replies View Related

Ubuntu :: Access Files That Existed In Directory Before Mount Partition To Directory?

Feb 21, 2010

Recently I mounted a larger partition into my home directory since I was running out of space, Everything went smoothly, but it caused me to wonder about something I cant figure out. While playing with the mount unmount commands when I was copying everything over... before editing my fstab.

Is there a way to access the files that existed in a directory before you mount a partition to that directory? after mount the original files are gone.unmount and they are back, Where do they go?

View 3 Replies View Related

Slackware :: Failed To Initialize NVIDIA Graphics Device On Startx With Slackware 13.1

Aug 24, 2010

I installed slackware 13.1 x86_64 bit with multilib, and its been about a month already, I'm really enjoying slackware but I am being troubled with my nvidia card, and I need to get my 3D acceleration working. And I've been looking around the net for information and kept on trying to make my nvidia card to work but to no avail. I cant get X to start, once I put in a xorg.conf stating to use the nvidia card. After troubleshooting for almost 2 weeks and now at my wits end, I now come humbly looking for help in linuxquestions slackware community forum.I've installed nvidia 64 bit kernel, drivers from slackbuilds (version 256.44). The laptop model I'm trying to get it working is an -ASUS K52J Intel Core i3 2.40Ghz with 2GB RAM and with an Nvidia Geforce 310M with 1GB dedicated VRAM.

View 14 Replies View Related

Ubuntu :: Write Access On Raid5 Mount And Network Access

Apr 22, 2010

I'm running ubuntu 9.10, and created a softraid5 with no problems. Now i need it to automount with user read/write access, and i need to make some network share folders. My fstab has the following line for the raid:

Code:
/dev/md0 /media/raid auto rw,user,auto,exec 0 0
After i mounted it, i changed the permission with:

Code:
sudo chmod 777 /media/raid/
So now i can create folders and files on it.
Then i created some shares, one with guest access and other with no guest access.

Now the questions:

1) If i access the guest shared folder via WinXP, i create files and folders, but they appear locked on ubuntu, so i cant access them until i change the permissions. If i go to proprieties/Permissions, the owner is "nobody".

2) What password do i need to use on WinXP, and i try to access the non-guest shared folded? Do i need to create a user just for that?

View 1 Replies View Related

OpenSUSE Wireless :: Device Is An Integrated Dell Wireless 1397 WLAN Mini-Card

Dec 25, 2009

My wireless device is an integrated Dell Wireless 1397 WLAN Mini-Card, I am unsure about the driver I have in use. I am sure I have a driver installed because the configuration screen shows my network. I currently have the computer plugged into my network via CAT 5 but I would like to be able to use the wireless (obviously.) I am using Open SuSE version 11.2 and I have run the updater. I could not see my wireless network before running the updater and I can now so I know that the updates have helped but I am again stuck. I have tried to search the wireless forum and I have tried to tinker with the settings in YaST , but nothing seems to be working. Reading the Welcome page of the wireless forum, I tried the Broadcom chip-set advice:

[Code]...


I have read and taken to heart the advice given for receiving help and if any more is needed I will gladly give it. I have a small amount of experience with SuSE Enterprise edition so I can understand some technical stuff but I am best at following specific instructions.

View 7 Replies View Related

OpenSUSE Wireless :: USB Wireless Device That Works OOTB?

Apr 27, 2010

Are any of you using a USB wireless dongle that basically works Out of the Box, so to speak?

View 9 Replies View Related

Debian Hardware :: Mount USB Device By ID

Aug 16, 2014

I just plugged my phone containing a new SD card (bought this morning) to my PC, in order to transfert some data. The problem is that the device is detected in lsusb but doesn't appear in fdisk output (otherwise I could mount it by mount /dev/device_name /mnt/temp). It doesn't appear in GParted or as desktop icon, even after rebooting my PC keeping the device plugged in.

Is it possible to mount the SD card using the lsusb ID? Here are my outputs (the device has ID 0fce:01a7)

Code: Select allroot@dynamic:/home/dovah# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

[Code] .....

View 2 Replies View Related

OpenSUSE Network :: How To Mount NAS Device

Jan 30, 2010

I'm trying to mount my NAS device via NFS with suse 11.1, but up to now it failed. The NAS does support NFS, but it requires a UID and a user name and up to now I could not figure out the correct nfs mount options for that.

If I just make mount 192.168.0.2:/nas1 /mnt a get the error message "mount.nfs: access denied by server while mounting 192.168.0.2:/nas1". So can somebody please tell me the correct options for user name and user id which the mount should use. And, preferable the correct entry for the etc/fstab file to make this mount being executed automatically during startup. I studied the mount(8) and nfs manpages several times, but I do still have no idea how to make it.

View 9 Replies View Related

General :: Cannot Find USB Device To Mount?

May 23, 2011

How can I find which /dev/? device to mount my USB hard drive on redhat 3 taroon, I've been googling a lot and checked log files and still no clue. I'm trying my last chance with you experts, # /sbin/fdisk -lgives nothing about the USB drive

# lsusb -vv
Bus 004 Device 005: ID 059f:0951 LaCie, Ltd
Device Descriptor:

[code]....

View 4 Replies View Related

Ubuntu :: Authentication To Mount Device?

Feb 7, 2010

Cant I get rid of the window which says "authentication required to mount the device" every time when I try to open a common drive?

View 1 Replies View Related

Ubuntu :: How To Mount A Device For All Users

Sep 12, 2010

OS: Ubuntu 10.04 (in VirtualBox virtual machine) how to mount a device for all users. I tried everything and can mount it only for root.
I'm trying to mount shared device in VirtualBox virtual machine.I added record in `fstab` file:

shared /mnt/shared vboxsf rw 0 0

I got /mnt/shared permissons: drwx------I've tried to add options 'rw,user' in fstab, but the option 'user' is not supported by mount program in my system.

View 1 Replies View Related

Networking :: Nfs Mount Hotplug Device?

Feb 10, 2010

Current stable Debian runs on both machines. I connect a digital camera to the USB on the server ("a") and the camera's filesystem is mounted automatically.I want that same filesystem to be made available to the other machine ("b") through nfs.What should be in fstab for that filesystem, or is something else needed in the configuration for "b" in order to access the filesystem which is physically on "a"?

View 5 Replies View Related

General :: Set Up Usb Device To Be Available To Mount And Not For Other Users?

May 18, 2010

I am trying to set up my usb device to be available to mount and umount only for me, not for other users. Using Slackware 12.2Entry in fstab is as follows:

Code:
/dev/disk/by-label/USB /media/usbvfat auto,group,user,noexec,gid=usb,umask=007 0 0
device information:

[code]....

View 3 Replies View Related

Fedora :: Authetication Is Required To Mount The Device?

Jun 21, 2010

since I installed fedora 13 in my laptop, every time I want to access my windows drive it asks for root password to authenticate! I know there must be a way to fix this issue, i did this in my Fedora 10, but I forgot how I did it.Can anyone plz help me, so that only one authentication is sufficient, every time I restart/ start it asks for authentication which is very boring and I hate this

View 6 Replies View Related

Fedora :: Mount A Windows Mobile Device?

Jul 8, 2011

As the title says. I'm on fedora 15 and synce does NOT work. I need an alternative.

View 4 Replies View Related

OpenSUSE :: Device Notifier Mount Fails?

Jul 16, 2011

I'm using OpenSuse 11.4 (x86_64) with KDE 4.

It's not possible to mount external USB (ntfs) disks with a non-root user using the Device Notifier or Dolphin. The error is:

Could not mount the following device: MyBook 2

org.freedesktop.UDisks.Error.PermissionDenied: Authentication is required

It is a permission problem; running Dolphin under root and clicking the USB disk mounts it without problems. The same should be possible to an ordinary user. The Update Applet does not work for the same reason (I can only install updates using yast).

Of course, I googled the error and there were a number of possible solutions, which I all tried. That includes allowing the action in the policy and adding the user in AdminIdentities local-authority. The file /usr/share/polkit-1/actions/org.freedesktop.udisks.policy contains "yes" for every option. Needless to say it doesn't make sense and I'm out of options.

View 1 Replies View Related

OpenSUSE Network :: Ncpmount: No Such Device In Mount(2)

Oct 3, 2010

NCP Mount worked fine in Open Suse 11.2, but fails in 11.3

Using the same script, but after upgrade I just get this error...

ncpmount: No such device in mount(2)

View 4 Replies View Related

General :: Can't Mount Usb Disk - It Just Create /dev/sg Device But No /dev/sd

Dec 23, 2010

I have a Corsair R60 ssd disk which is a disk with both sata and usb connectors. But the usb thing seems to be a bit non-standard, or maybe its just my fedora linux.When I insert the disk using a usb cabel to a running Fedora 14 linux system, a device called /dev/sg3 is added but that is all. No new /dev/sd* device is created so I can't mount the disk.

If I look at

cat /proc/scsi/sg/device_strs

I get

ATA Hitachi HTS54321 FB2O
HL-DT-ST DVDRAM GSA-T50N RP05
Seagate Desktop 0130
Corsair CSSD-R60GB2

So the disk is there. (The last entry) but my linux will for some reason not see it as a usb hard disk. When I insert other usb disks they work fine. It is only this specific disk which causes problems. I have tried on 3 different computers with the same result.

A hint to the problem may be that if I add the disk to a windows system(With usb) the disk is called "A fixed disk" and not a portable disk as expected. The disk works fine with linux If i connect it with the sata cabel, but I would really like to have it working with usb too. (To mount it on computers without sata).

Added:I did try to mount /dev/sg3 but mount say that its not a block device. (File say Its a character special device).

Added output from dmesg:

[ 97.454073] usb 7-1: USB disconnect, address 2
[ 105.913055] hub 2-0:1.0: unable to enumerate USB device on port 3
[ 107.048054] usb 2-3: new high speed USB device using ehci_hcd and address 5
[ 107.162900] usb 2-3: New USB device found, idVendor=1b1c, idProduct=1ab8

[code]....

I found an other guy with exactly the same problem [URL] so I think its beginning to look like a bug in the drives firmware or in the linux kernel.

Final update:Corsair have said that the disk design is broken and there does not seem to be any way to make it work.

View 1 Replies View Related

Ubuntu :: Use Ifuse Instead Of Gvfs To Mount Device

May 29, 2010

I installed ifuse (a utility to mount your iPhone or iPod touch via the USB cable) and I want this to be the default way my iPhone is mounted when I connect it. Currently, when I connect it, it gets mounted by the gvfs (Gnome virtual file system) at ~/.gvfs/iPhone. Either one change should be made (the 'default command to execute when this device is connected') or two changes (tell gvfs not to mount, and tell ifuse to automount). I don't know how I can get this to work.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved