I have an HP DV6 1030us and I am dual booting Windows 7 64bit and Slackware 13.0 64bit. I know there is a Broadcom wireless card and when I go to HP.com it says there are 2 drivers:
Intel PRO/Wireless Drivers for Microsoft Windows 7 10-2009 13.0
>>>> Intel Wireless WiFi Link 5300 Intel Wireless WiFi Link 5100
Broadcom Wireless LAN Driver for Microsoft Windows 7 10-2009 5.60.18.8
>>>> Broadcom 43224AG 802.11 a/b/g/draft-n WiFi Adapter
My question is, how do I get wireless access in Slackware? I already have it set up to work with an wired connection but I really need the wireless access to make the OS functional for me to use.
I'm able to configure my Wireless network to connect with an AP with WEP key but...
Now I'm at home, I've a WPA2 key (my router now is supporting both, WPA and WPA2). I used WICD to connect but no success at all! It just stops with "Connection failed: Could not contact the wireless access point"
if I type IWLIST key:
Code: ra0 2 key sizes: 40, 104bits 4 keys available [1]: off [2]: off [3]: off [4]: off code....
I have a Western Digital My Book World Edition II 2TB http://www.wdc.com/en/products/products.aspx?id=290 set up on my Windows install.how do I access the files from my Slackware box? I have Slack 13.37 64bit installed on a Samsung laptop.
i'm running slack 13.37. my machine has a "generic" wireless card which is currently sitting idle in it, since i used a wired interface for internet and local networking (i used the wireless interface for a while, but for what i need it wasn't a reliable or stable enough connection). my question is, can the idle card be used as a wireless access point on a separate subnet? if so how?
Debian 2.6.32-5-amd64 KDE I have to make one of my computers wireless. i need some product recommendations for a wireless access point & a wireless network card.
one of these "WiFi works in Gnome, not in KDE" threads, but I have been all over google and hundreds of threads across different sites and can't figure this one out.As mentioned, wireless is peachy in Gnome, unfortunately I like KDE and I'm more productive using it (when I have internet). Wired network works fine in KDE, and my network card
I recently installed Slackware Linux 13.1 , and my Wireless is down. I've only installed 3 Linux disto's on my main laptop (Ubuntu 9.10 , 10.04 , and Crunchbang Linux 9.04 , just had Crunchbang), and they all had the same problem. In all three , I was able to enable Windows Wireless drivers and every thing worked. Now , I'm assuming I have to the same ting in Slackware? Sorry , but I have no idea what my wireless card is. But I know that my laptop is a Dell Insprion E1705. One last thing , I did ifconfig and that wlan0 is my Wi-Fi interface. I typed ifconfig wlan0 up to see if that was the problem. After I did that , I got and error message. Then I typed ifconfig wlan0 down to see if it was down and it made wlan0 down. I tried bringing it up again , but I got an error saying it couldn't find the device specified. Also , how do I install XFCE? I really don't like KDE for some reason and would like to install XFCE. I chose XFCE over GNOME (my favorite) because I want to try something new.
System Information:openSUSE v11.2 32-bitdesktop: KDE 4.x (.3 I think)Background info: Installed openSUSE 11.2 on an old HP laptop this morning. I've been trying to set up my wireless connection since. After 2-ish hours of searchingupport forums, I managed to use network manager to connect to my home wireless network via WEP, I will say now that I've had lots of trouble.
I've finally been able to connect to my network, to a point. The NetworkManager in openSUSE says that the wireless connection is active. I can verify this by saying that on the other conputers in my house (winXP, win7, and Ubuntu v9) I have been able to ping this openSUSE computer and my router recognizes it as part of the network. Here is where the problem arises: I cannot access the internet from the openSUSE machine, with a domain name or by trying to type in an ip address, and I cannot ping other computers on my network with it.
My wireless is a libertas 88w8335. Suse 11.4 just installed. For this one, I need a windows driver with ndiswrapper. ndiswrapper is installed, and the driver as well.
I can see my networks with iwlist scan my network is set up in yast with ifup (I can scan the networks and find mine), but I cannot connect to my Acces point : there is no SSID with iwconfig.
I'm having trouble setting up my desktop pc to access the internet via my wireless router. i have tried to set it up in networkmanager (it shows as connected when clicking on the NM icon) but when loading firefox or when trying to update opensuse i just cannot get a connection.
I do have trouble in configuring my wireless network,though i configured it as what Alien BOB say(http://alien.slackbook.org/dokuwiki/...ckware:network) and google some similar Threads.My latop is Asus F83vf, wireless card is Atheros AR9285 Wireless Network Adapter. The code when I run lspci command is code...
I yesterday installed Slackware and I am quite impressed. I have been using Ubuntu for a year and decided to move on. My wireless worked fine in Ubuntu but it seems that it needs some configuration for Slackware.Note that my home network WiFi has no password or whatever. I still can't find any networks with my wireless even after the configuration. I fire up wpa_gui and it can't spot anything..
I moved my server and network equipment, and now the wireless works but I cannot get my server online. I host a website, so this is kind of urgent.
I have a wireless router and can access the internet fine on my laptop. My server is wired & connected to the router. It sets up the networking properly.. ifconfig has an ip address, the default gateway is present. But I cannot ping google, or even the router. It says destination host unreachable.
So I go back to the laptop to check the router settings.. sometimes it likes to assign the server the wrong internal ip. But, I can't access the router settings either! The page (192.168.1.1) times out. Same with trying to ping the router. How can the laptop be online if it can't reach the router?
Oddly, ifconfig on my laptop reports an ip address starting with 99.233. It's always given me an internal address starting with 192.168. What's going on here? Is the router not allocating an internal ip? I use wicd to connect, if it's relevant.
We have a windows laptop that can only get a "local connection". Now it does sound like the router is forwarding directly to my laptop, instead of allocating internal ips.
I've been running with DSL and Linksys router, connecting servers and printer via hard-wire Ethernet. The router doesn't like to talk to things without a network connection (the only thing I can have is a USB wireless modem until I get HughesNet or some other satellite service). What I'm wondering is what I need (a bridge? a switch?) to plug stuff in and have them talk to each other nicely.
So this has been going on for weeks now. Usually doesnt happen till friday-saturday. My internet breaks down on slackware, im able to play an online video game, and sometimes if i'm lucky, use pidgin to get on Gchat. However other than that, I cannot access the internet. I've tried multiple browsers, resetting my router, and resetting my modem. It's connected through an ethernet cord, and I am getting an IP from my router. My first thought was that it was a bandwidth limit, but I'm at my house, on a windows computer typing this right now. I'm not an expert on bandwidth caps so maybe it is this. The weird thing is,I have a laptop running slackware as well. Even over wireless it doesnt work.
To make a very low level backup of my laptop prior to upgrading it, I decided to create an iso of the harddisk; while it is doing this, but a bit too far to just cancel and start anew, so I cannot test it out right now I decided to post here.
of course, there are partitions on /dev/sda (there's a swap for example)I may (am pretty damn sure I will) want to access the files within the iso, and that's where I wonder how to tackle that; I'm thinking along the lines of setting up a loopback device (losetup) but I don't think that that will be enough to recognize the partitions. Any thoughts? (or just re-create an image of /dev/sda1 ?)
I use a WD 300 gb usb disk for backup, storage etc. No problems until a couple of weeks ago. I can access it with file managers, gparted, fdisk etc with no problems. But now I am unable to write more than the occasional file to the disk. There seems to be no consistency as to what will or won't write. I get a message that the operation is not permitted. This occurs under either user or root.It happens in both 13 and 13.1. No other issues have come up. The internal hard disk in the laptop remains normal. All other usb periph's are working properly.
I have some problems accessing NTFS USB devices from Dolphin. If I mount by hand the device, mount -t ntfs-3g /dev/sdc1 /media/disk I can access to the disk from Dolphin. mount command reports: /dev/sdc1 on /media/disk type fuseblk (rw,allow_other,blksize=512)When the same disk is mounted through Dolphin (by clickin on the disk icon), I cannot see any content. mount command reports: /dev/sdc1 on /media/FLS-U2-300 type fuseblk suid,nodev,allow_other,blksize=512,default_permissions)root@obelix:~# As you can see, mount command reports different configurations. I suspect the extra parameters used by Dolphine causing problems but I don't know how to configure KDE to change the mount options. This problem is new to Slackware 13.1. My previous 13.0 configuration had not that problem
the Akonadi server won't start correctly on KDE startup. I've not found the 100%-working solution for this problem yet. It seems like many Slackware users just remove the akonadi package Unfortunately, I don't have the access to my Slackware box right now, Here is what I've tried to do so far: 1) Make the mysql daemon executable:
[code]...
After doing those steps the Akonadi server still shows a window with errors on startup. As far as I remember the ~/.xsession-errors file contains an error like "Can't connect to local MySQL server through socket /home/alexander/<some path that I forget, sorry>/mysql.socket.
I have a problem with my slackware 13.1 that is that i can�t access it outside my local network. It�s running behind a router and i have activated the DMZ to my slackware computer i can access the web with my slackware computer but i can�t get access to it outside my LAN.
I was playing around with some files in Slackware and decided to do something stupid for the sake of experimentation. I wouldn't say I screwed something up because I did it intentionally to see what would happen (that's how you learn, right?), but I disabled my login tool. I need to access to the....
Whilst my office is decorated I have to move my computer. To make this as easy as possible I have setup my first ever wifi. An access point (wired to adsl router). It is working by using wicd and I am wireless at the moment. What security should I put in place (wicd says unsecured). I am probably quite safe as the nearest road or house is 200m away but I would like to learn what I need to do as this is the first time in over 20 years of computing that I have gone wireless.
I had an intstall of 10.2 that I'd been using forever that has a Prisim card in it that I was using as router/access point across a bridge. Recently I rebuilt my machine (replacing a bunch of drives) and installed 13.1. I'm having some difficulty getting my AP reestablished. The card is showing on the pci bus
I installed today Slackware64-current on my laptop, but I can't get working internet connection. I have installed wvstreams 4.61 and wvdial 1.61, configured it right, it gets an IP address and connection but I can't get an access to the internet.
