Fedora :: Mount A Windows Mobile Device?
Jul 8, 2011As the title says. I'm on fedora 15 and synce does NOT work. I need an alternative.
View 4 Replies
ADVERTISEMENT
Fedora Networking :: Mobile Broadband FC13 Huawei E173 - Cannot Switch Device To Modem Instead Of Storage With Usb_modswitch
Nov 27, 2010I've been trying to make my FC13 Dell d620 work with a Huawei 3G usb modem mode E173. I can not switch the device to modem instead of storage with usb_modswitch. This is what I get on lsusb:
[Code].....
OpenSUSE Hardware :: Cannot Mount The Device Works Fine On Windows And Mac Computers?
Oct 13, 2010Just had to replace the hard drive on my wife's iPod Classic 6th Generation. Now I cannot mount the device. It works fine on Windows and Mac computers. I have tried formating it on both Windows and Mac, I've done restores through Itunes on both. Here is what I get in my /var/log/messages
Code:
kernel: [84412.470389] scsi10 : usb-storage 1-5.3:1.0
kernel: [84413.477317] scsi 10:0:0:0: Direct-Access Apple iPod 1.62 PQ: 0 ANSI: 0
kernel: [84413.477445] sd 10:0:0:0: Attached scsi generic sg7 type 0
kernel: [84413.500917] sd 10:0:0:0: [sdf] Spinning up disk....ready
[Code]...
Fedora :: Authetication Is Required To Mount The Device?
Jun 21, 2010since I installed fedora 13 in my laptop, every time I want to access my windows drive it asks for root password to authenticate! I know there must be a way to fix this issue, i did this in my Fedora 10, but I forgot how I did it.Can anyone plz help me, so that only one authentication is sufficient, every time I restart/ start it asks for authentication which is very boring and I hate this
View 6 Replies View RelatedSoftware :: Fedora 10 Hot-plug Or Otherwise Mount A USB Device
Feb 15, 2010I want to use a USB "stick" or "pen drive" or whatever you call it to carry files elsewhere.
Nothing appears in "places" after I plug it in.
I am comfortable with the shell. That is not a problem. In Fedora 6, it would appear in /dev/mount or something--I forgot. With Fedora 10, I have no idea where to look.
Fedora :: Mount Scsi Device - Android Phone ?
Jul 15, 2011How can i do to mount a scsi device ? it is a lg android phone ...
My dmesg shows :
Fedora Hardware :: Can't Mount Device - Kingston USB Not Found
Jul 27, 2011Fedora 14 is used throughout the whole problem. The problem started when I wanted to install Fedora 15 DVD by making a bootable USB key. The size of the USB stick is 8 GB. The problem happened when I (following the tutorial) wrote the line [URL]... livecd-iso-to-disk command associated with the path to the ISO DVD and the partition on the USB stick. the USB stick has the device name /dev/sdb , 1 partition sdb1.
I then noticed that it was mentioned to unmount the USB drive before doing this command. so, while the terminal had written in it "Checking" , I pressed CTRL+C to stop the execution and then pressed on the arrow beside the device in the computer window (Which I think that it unmounts the device). The actual problem started here. I then tried to mount the device but couldn't, It said the device was not found. so I removed the drive and inserted it again, the OS didn't automount the USB drive, I tried to manually mount it but it said the device is not found or doesn't exist. then I used fdisk -l, It said that the sdb didn't have a valid partition table. Also the size of the device is wrongly reported. It should be 8 GB but it is reported to be 2 TB?!
[code]....
I think the wrong partition table made it think that it has a certain number of sectors which isn't real,that made it think that the device is 2 TB large....
Fedora :: XFS Mount Failed - Device Or Resource Busy
Sep 8, 2011After upgrading to fedora 15, I have problems mounting XFS filesystem.
The short tale:
Code:
08:01:38 localhost root>mount -t xfs -vv /dev/sdb1 /data/disks/old
mount: /dev/sdb1 already mounted or /data/disks/old busy
08:01:39 localhost root>fuser /data/disks/old
08:01:41 localhost root>lsof /data/disks/old
08:01:44 localhost root>xfs_repair -t 1 /dev/sdb1
xfs_repair: cannot open /dev/sdb1: Device or resource busy
08:01:48 localhost root>fuser -mu /dev/sdb1
08:02:08 localhost root>dmesg | tail -n 5
[1655779.759764] SGI XFS Quota Management subsystem
[1659275.905756] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
[1659275.908745] SGI XFS Quota Management subsystem
[1659389.154986] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
[1659389.156519] SGI XFS Quota Management subsystem
Device is not mounted, and directory is not in use, it has just been created. There is nothing in log files that could remotely point the cause. After removing device (echo 1 > /sys/block/sdb/device/delete) and reattaching it, disk started working.
Ubuntu Networking :: Sharing Windows 7 Drives - Unable To Mount Location - Failed To Mount Windows Share Error Message
Sep 5, 2010I have recently set up an ubuntu installation on an old PC. After some fiddling with both it, and the windows 7 machine, I have managed to share all of my drives. However, when attempting to access them from ubuntu, only 2 of the 4 hard disk shares will mount, with the other 2 failing with a Unable to mount location, failed to mount windows share error message.
View 2 Replies View RelatedUbuntu Multimedia :: Rhythmbox - How To Connect A Win Mobile Device
Feb 28, 2010I'm using Ubuntu since some month and lovin it. Only one thing with Rhythmbox and my HTC mobile phone running Win mobile 6.1 is annoying: The mobile device is never recognised as a music player nor as a usb device so I can't load music via Rhythmbox. Ubuntu recognises it as umts-modem which I like and would like to maintain. But is there any way to load music on it at the same time? I've already tried different settings on the devices usb-to-pc settings menu, but this only switches on and off the modem functionality but doesn't make ubuntu recognise the device as usb or music player.
View 5 Replies View RelatedUbuntu Networking :: Can't Get ZTE TU25 4g Usb Mobile Device To Work With 9.1?
Mar 9, 2010I'm trying to get an older machine access to the internet. I have a zte tu25 i got from comcast. My machine is a dimension 2400 pentium4 2.8 ghz, with 1gig ram, ect... if you need anything specific let me know. Just installed 9.1 from cd. when i plug my usb device in i get nothing. I've downloaded UbuDSL and Ndiswrapper based on what i got from other posts but i cant get either to work. Does anyone know if this device will work with ubuntu 9.1?
View 1 Replies View RelatedUbuntu Installation :: Internet VIA USB Device From Mobile Company?
Nov 7, 2010I have an internet from my mobile company, it isn't ethernet or a usb thats connected to a phone or anything. its basicaly a device that has my mobile card/chip inside and it connects to the internet, here's a picture of the device to give more information.
[URL]
Basicaly on windows xp, or 7, I just plug this into any USB then it automatically installs a software, then program will popup that has "Connect" buttom, I click on that and i'm online, but in linux/ubuntu that auto installation is not coming.
Hardware :: Ubuntu Mobile Internet Device On A Laptop?
Apr 6, 2010install Ubuntu Mobile internet addition on to a P3 (1200Mhz) with 1Gb RAM 40Gb HDD. Im just thinking that i might make this little old laptop run faster.
OR
Do i just stick with Puppy Linux as this is running ok with this hardware?
Software :: Vodafone Mobile Connect Can't See Device In Virtualbox?
Feb 24, 2011I've got an XP pro SP3 Vm in Virtualbox with Vodafone Mobile Connect installed. The USB dongle is detected by virtual box and I've tried passing it through with and without a filter enabled for it. Both times it was listed with the USB keyboard and mouse, all were greyed out. In Windows Ddevice Manager there's a entry for a USB Mobile Internet controller but the Vodafone Mobile Connect software isn't picking up the device. I'm using Ubuntu 10.04 and teh latest Virtualbox downloaded from the website with the PUEL extensions pack so I can have USB.
View 1 Replies View RelatedUbuntu :: Fresh 9.10 Install Reboot Error No Device - Mount Partition Mount: Can't Fin?
Jun 24, 2010what now trying to mount partition get this error this is the partition ubuntu 9.10 is installed on and upon reboot error no device with a long string. mount: can't find /dev/sda6/mnt in /etc/fstab or /etc/mtab
so now that I believe I've successfully mounted the partition how do I direct the bootloader to this partition /dev/sda6 on /media/11076e45-e27d-470b-bb6d-6894f7809a0c type ext4 (rw,nosuid,nodev,uhelper=devkit)
Ubuntu Installation :: Installing An Operating System And Monitor It Using A Mobile Device?
Jan 11, 2010I was wondering if i can remote desktop with my blackberry if i could install a program on my computer that would allow me to monitor a operating system install or even use my blackberry to install the operating system.
View 3 Replies View RelatedUbuntu Networking :: Sharing Internet Connection To Mobile Device By WiFi?
Feb 26, 2010I was connected to internet by wired connection in my home. I was able to share my Internet connection to other computer by proxy using squid. My question is, Can I share my internet connection to mobile device by WiFi? I'm using ubuntu 9.10 in my laptop.
View 5 Replies View RelatedUbuntu Networking :: Connect The Mobile Device And A Icon Appears In Desktop But Doesn't Start
Jan 6, 2010In ubuntu 9.10, I connect the mobile device and a icon appears in desktop, but it doesn't start and doesn't connect. I went to "network connections" -> mobile broadband -> add -> select contry, bla bla bla ->insert PIN->apply
View 2 Replies View RelatedGeneral :: How To Mount Usb E160 Mobile Broadband Dongle In Kubuntu?
Jan 28, 2011I have use my e169 mobile broadband dongle with Ubuntu without trouble.With Ubuntu network manager I can connect easily. Few days back I want to try for Kubuntu and I installed it through Ubuntu.Now I can log to either Ubuntu or Kubuntu.But when I connect to Kubuntu I cant connect to Internet with Kubuntu network manager.When I try to make a usb disk with kubuntu I realise that my usb dongle detected as a disk.How should I connect to Internet by using my usb dongle.
View 1 Replies View RelatedSlackware :: VirtualBox - Windowsxp Guest - No Sound - Unknown Audio Device - In The Windows Device Manager
Mar 11, 2010For those that use Virtualbox on their slackware host and have a windows (xp) guest running. I have tried various settings for sound (Alsa, PulseAudio), the AC97 drivers are installed in the Windows xp guest os, but there is no sound and there is an unknown audio device (in the windows device manager). If I remove the AC97 drivers and use the soundblaster16 drivers in the Vbox settings there is no unknown sound device, but there's still no sound. why I can't get sound working?
View 13 Replies View RelatedFedora Installation :: An Error Occurred Mounting Device Proc As /proc: Mount Failed
Jul 6, 2010I've got the F13 LiveCD that I was able to boot and use using the "nomodeset" boot option. From the desktop I'm trying to perform an Install to Hard Drive. I've read the Install from LiveCD post regarding the creation of a /boot partition and a / root partition. I've tried creating them without the LVM group and with. But every time I appempt to install I get...
An error occurred mounting device proc as /proc: mount failed: (9, None). This is a fatal error and the install cannot continue.
Hardware is a Sager 8887 (P4, 3.06HT, 60GB HDD, Radeon 9000 graphics adapter)
Ubuntu Networking :: Sharing Folders From It To Windows - Error: "Unable To Mount Location" "Failed To Mount Windows Share"
Jun 28, 2011I have a computer running Ubuntu 10.10. I am using it to share many hard drives connected to it. I am using Samba. I have successfully shared many folders to one Windows user. I am attempting to share other folders within the shared folders to another user as read only but have not had any success. When I attempt to connect to one of the shares from another computer running Ubuntu 10.10, logged into an Administrator account with the same username and password which I setup on the Samba share I get the error: "Unable to mount location" "Failed to mount Windows share"
View 3 Replies View RelatedFedora Networking :: Cannot Mount One Of My Windows Machines
Apr 10, 2010What could block access from Fedora to just one Windows XP system without blocking access to or from other Windows systems on the network? I have a working Windows network with six computers and one network-attached-storage. Two of the computers (MARTIN and NANCY) are Windows XP, the rest are older. I set up a Fedora laptop with Samba. The Fedora system can access the Internet (I'm using it to post this message). It can see all the Windows systems, and it can open all of them except MARTIN. The firewall on MARTIN is turned off.
I go to Places, Network, and I see nine icons: the Fedora system, seven Windows systems and one for Windows Network. If I double-click on the MARTIN icon I get a message window that says "Unable to mount location" and "Failed to retrieve share list from server". If I double-click on any of the other Windows icons, including NANCY, a new window opens showing the shares on that system. Similar results with smbclient. It shows the shares for all systems except MARTIN. For MARTIN it says "Connection to MARTIN failed (Error NT_STATUS_UNSUCCESSFUL)."
The other Windows computers on the network can open the shares on MARTIN with no problem. The network is partly wired and partly wireless. The wireless network is secured with WEP. The Fedora laptop is (as you might expect) wireless. The Fedora laptop is an emachines E520 and both Windows XP machines are custom-built tower systems. I don't think that information is relevant but I mention it anyway. What should I look for?
Fedora :: Windows Mount A Linux Partition
Sep 10, 2010I have a cluster of linux boxes that authenticate with ldap, and a few windows boxes. I have been asked to make the windows boxes mount or map one of the linux partitions on the server.Any ideas or search terms that could shortcut the research process on this would be great.
View 4 Replies View RelatedRed Hat / Fedora :: Mount Windows Directory On Machine (5)
Jan 22, 2010How to mount windows directory on Linux machine (Red Hat 5)?
View 2 Replies View RelatedRed Hat / Fedora :: Mount Samba Share To Windows?
Aug 31, 2010i hav configured samba share in RHEL 5.4 , it can be accessable from other linux machine but i want to access it from windows machine, how can i do it? i also want want to know that in RHEL my partitions are in ext3 format, so how can windows can detect this partition, Is samba share is independent of filesystem on either machines
case2:---
i hav configured samba on windows server 2008 , how can i mount it on linux machine
Fedora X86/64bit :: My Windows Partion Won't Mount On Some Boots
Jul 30, 2009It mounts sometimes, sometimes it doesn't ! what could be the problem ? i have tried mounting it manually but no success.
View 5 Replies View RelatedFedora :: How To Disable Mount Of Windows Partition In Dolphin
Jan 13, 2010I just installed Fedora 12. When I open Dolphin, I do find links on the sidebar which enable me to mount the NTFS partitions with a click. I want to disable this for less privileged users and only allow root to do mount and unmount of partitions. I was not able to see autofs installed nor any sign of entries in the fstab.
View 3 Replies View RelatedFedora Networking :: Unable To Mount Windows Shares
Mar 2, 2010I am unable to mount Windows shares on Fedora 12. From Nautilus, I can navigate to the shares, but when I attempt to open one I get a dialog "Password required for share ... on ..." asking for username (prepopulated with my username), domain (prepopulated with MYGROUP) and password. I have the same username on the Windows box, but when I enter the password and click Connect, the dialog just pops up again. I'm not sure what "domain" is, tried with my Windows workgroup name, no good. If I blank out either username or domain, the Connect button is disabled.
I tried using the mount command:mount -t cifs //192.168.0.2/... /tmp/mnt -o username=adrian,password=...,iocharset=utf8,file_m ode=0777,dir_mode=0777
That did work once, but now gives the useful error message:mount error(5): Input/output error
Refer to the mount.cifs(8) manual page (e.g. man mount.cifs)
I can run Windows instead on the client machine, and that gives me access to the shares, no problem.
I have libsmbclient-3.4.5-55.fc12.i686, but that was installed a month ago. I don't see any more recent changes to anything relating to the samba client. I've never had to enter a password to access Windows shares. Actually, it looks like the problem may be on the Windows side, although as far as I know, nothing has changed there. Using smbclient with debuglevel set high, I see failures with this error:SPNEGO login failed: NT_STATUS_REQUEST_NOT_ACCEPTED
Every now and again, I can connect to one or more shares, but after a few attempts, I can't connect to any more. Tried rebooting the Windows box, but that's had no effect. Oh, and "smbclient -L" shows domain as the host name of the windows box, but anonymous login (smbclient -L -N) shows domain as the workgroup name.
Fedora :: Auto Mount Windows Drives On 14 Startup?
Mar 13, 2011i am using fedora 14. Each time i login i have to manually mount my windows drives. Is there any script or system setting which will help me to auto mount my windows drive on startup.
View 3 Replies View Related