OpenSUSE Network :: Ncpmount: No Such Device In Mount(2)
Oct 3, 2010NCP Mount worked fine in Open Suse 11.2, but fails in 11.3
Using the same script, but after upgrade I just get this error...
ncpmount: No such device in mount(2)
ADVERTISEMENT
OpenSUSE Network :: Npcfs Crashes If Copy Job Netware 5.1 Mounted Volume Via Ncpmount Tcp Or Ipx Is Done
May 23, 2011After update 11.2 to 11.4 copy jobs from netware 5.1 volume to local disk linux system does crash after a couple of seconds. I might have to do if there a allot of small files in that job. If happend system reboot is required because unmount netware volume nor delete copied files to the local linux system is not possible. Recompiling ncpfs package not possible because error free source package ncpfs version 2.2.6 might not be availble.
Error message:
May 22 19:31:03 jaci kernel: [ 4694.764721] ------------[ cut here ]------------
May 22 19:31:03 jaci kernel: [ 4694.764730] kernel BUG at /usr/src/packages/BUILD/kernel-desktop-2.6.37.6/linux-2.6.37/include/linux/dcache.h
[code]...
OpenSUSE Network :: How To Mount NAS Device
Jan 30, 2010I'm trying to mount my NAS device via NFS with suse 11.1, but up to now it failed. The NAS does support NFS, but it requires a UID and a user name and up to now I could not figure out the correct nfs mount options for that.
If I just make mount 192.168.0.2:/nas1 /mnt a get the error message "mount.nfs: access denied by server while mounting 192.168.0.2:/nas1". So can somebody please tell me the correct options for user name and user id which the mount should use. And, preferable the correct entry for the etc/fstab file to make this mount being executed automatically during startup. I studied the mount(8) and nfs manpages several times, but I do still have no idea how to make it.
OpenSUSE Network :: Nfs Server On 11.2 - Mount.nfs: Mount System Call Failed
Apr 29, 2010I've tried to get an opensuse box I have to share a directory via NFS. I've failed each time, but I thought that the third time, I'd enlist some help from the forums, if I could. how do I know that the nfs server and not the client is the problem? Short answer is: I don't! That's why nfs (and many netwrk problems) are laborious, you're troubleshooting needs to take place at both source and desitination. Next question, what do I have set up so far? Well, I did download the nfs server kernel stuff (two months back) and /etc/init.d/nfsserver start seems to get set up OK. No errors and the daemons nfsd, idmapd, mountd area all running. So, I *think* that part is OK. I have the share set up properly in /etc/exportfs and have "exportfs -r" it.
OK, now onto the trickier stuff: the client and iptables. On the client pinging to the nfserver box is perfect, and I have rpcbind running. the reported error is "mount.nfs: mount system call failed" though from experience nfs errors don't mean a whole lot.However, I will go off and check now and see if I need a mountd running on client-side too.Then there's iptables .... ouch, that could be a long and painful trek. I don't see any specific ports being blocked, and it's the iptables that the default v11.2 opensuse came with. I did turn them off and the problem was the same, so whether wishfl thinking or not, I'm hoping it's not an iptables issue.
OpenSUSE Network :: Create Network Bridge / Device Hooked Up Via Ethernet Had No Internet Connectivity?
Feb 25, 2011I'm on opensuse 11.4 (11.3 won't work with my monitor).
My computer gets internet through wireless and I want to share that internet through its ethernet port. So far I've tried using Knetworkmanager to create a network bridge between my wireless and wired connections. I created a new wired connection and shared it using the ip address settings. I was able to get both connections active, but the device hooked up via ethernet had no internet connectivity.
I also tried this command:
echo 1 > /proc/sys/net/ipv4/ip_forward
but another test resulted in the same fashion (no internet on wired). I believe anything I add to /proc should have an immediate effect, correct?
OpenSUSE :: Device Notifier Mount Fails?
Jul 16, 2011I'm using OpenSuse 11.4 (x86_64) with KDE 4.
It's not possible to mount external USB (ntfs) disks with a non-root user using the Device Notifier or Dolphin. The error is:
Could not mount the following device: MyBook 2
org.freedesktop.UDisks.Error.PermissionDenied: Authentication is required
It is a permission problem; running Dolphin under root and clicking the USB disk mounts it without problems. The same should be possible to an ordinary user. The Update Applet does not work for the same reason (I can only install updates using yast).
Of course, I googled the error and there were a number of possible solutions, which I all tried. That includes allowing the action in the policy and adding the user in AdminIdentities local-authority. The file /usr/share/polkit-1/actions/org.freedesktop.udisks.policy contains "yes" for every option. Needless to say it doesn't make sense and I'm out of options.
OpenSUSE Network :: Network Manager Not Detecting Wireless Device?
Sep 25, 2010Having a hard time getting NM to detect wireless usb device: Linksys model WUSB600N. Here are a few commands I do know about.
iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
irda0 no wireless extensions.
[code]....
OpenSUSE Hardware :: Cannot Mount USB Serial Device - Not Even As Root
Jul 19, 2010I want to mount a serial device. To get do the data section in the device and retrieve image files. Not even root can mount.
Code:
# ls -l /dev/ttyU*
crw-rw---- 1 root uucp 188, 0 Jul 20 13:07 /dev/ttyUSB0
# mount -t fuse /dev/ttyUSB0 /media/M65
/bin/sh: /dev/ttyUSB0: Permission denied
[Code]....
OpenSUSE Network :: Device YaST - Can't Identify YaST - "Unknown Network Device"
Dec 8, 2010In my YaST Network Settings (11.3), I see an entry labelled "Unknown Network Device" how to remove the confusion? The Overview tab also correctly lists my three known network devices (listed below), as does the Hardware Information utility. This is the output of lspci, and as far as I can tell, is accurate and complete. So what has YaST seen that it can't identify?
Code:
00:00.0 Host bridge: Intel Corporation 82845 845 [Brookdale] Chipset Host Bridge (rev 11)
00:01.0 PCI bridge: Intel Corporation 82845 845 [Brookdale] Chipset AGP Bridge (rev 11)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI [Code].....
OpenSUSE :: Mount And Recognize IPhone After Connect Device To Laptop Via USB?
Apr 18, 2010how can I mount my iPhone in Opensuse? after i connect my device to laptop via USB,opensuse doesn't mount it and recognize it at first as a digital camera.
View 3 Replies View RelatedFedora Networking :: Open The Network Device Control To Activate It But There Is No Network Ports In Network Device Control?
Jan 7, 2010I just added a 2 port network card to a system that is running Fedora 11, but it is INACTIVE. I open the Network Device Control to activate it but there is no network ports in Network Device Control. It is empty.It looks like the system recognize the card and loaded correct driver.
View 4 Replies View RelatedOpenSUSE Hardware :: Cannot Mount The Device Works Fine On Windows And Mac Computers?
Oct 13, 2010Just had to replace the hard drive on my wife's iPod Classic 6th Generation. Now I cannot mount the device. It works fine on Windows and Mac computers. I have tried formating it on both Windows and Mac, I've done restores through Itunes on both. Here is what I get in my /var/log/messages
Code:
kernel: [84412.470389] scsi10 : usb-storage 1-5.3:1.0
kernel: [84413.477317] scsi 10:0:0:0: Direct-Access Apple iPod 1.62 PQ: 0 ANSI: 0
kernel: [84413.477445] sd 10:0:0:0: Attached scsi generic sg7 type 0
kernel: [84413.500917] sd 10:0:0:0: [sdf] Spinning up disk....ready
[Code]...
Ubuntu :: Fresh 9.10 Install Reboot Error No Device - Mount Partition Mount: Can't Fin?
Jun 24, 2010what now trying to mount partition get this error this is the partition ubuntu 9.10 is installed on and upon reboot error no device with a long string. mount: can't find /dev/sda6/mnt in /etc/fstab or /etc/mtab
so now that I believe I've successfully mounted the partition how do I direct the bootloader to this partition /dev/sda6 on /media/11076e45-e27d-470b-bb6d-6894f7809a0c type ext4 (rw,nosuid,nodev,uhelper=devkit)
OpenSUSE Network :: Cannot Seem To Create Tun Device Using Ifconfig
Dec 13, 2010I cannot seem to create a tun device using ifconfig, even though the module is loaded, and the node tun is present in /dev/net and appears to have correct access permissions, trying to use nstx which requires the tun device. Only thing I can think of is adding an alias, but not sure where, since there is no /etc/modprobe.conf or /etc/modules.conf in SUSE 11.3.
View 2 Replies View RelatedOpenSUSE Network :: Bridge On Device Vmnet0 Not Running?
Jan 18, 2010I have installed VMWare on my laptop. Host operating system - Opensuse 11
Two virtual machines - Both of them have Opensuse 11 as Guest Operating System.
When I start both virtual machines I get the following message.
"Message from <local host name> : The network bridge on device vmnet0 is not running. The virtual machine will not be able to communicate with the host or with other machines on your network. Virtual device Ethernet0 will start disconnected"
I cannot ping to another Virtual machine from one virtual machine. I get "Host Unreachable" message.
OpenSUSE Network :: 11.1 - Router On USB Not Detected (Unknown Device)
Mar 10, 2010I installed 11.1 when it first came out. The PC I used gave up the ghost and I bought a refurbie, HP xw4100 and installed the 11.1 drive in it. All works except Internet connection. I am befuddled, bemused, confused and at a complete loss! The router on USB is not detected.
Boot Time - Status blinks, LAN is OFF and remains OFF. DSL blinks several times.
Booted - Status continues and DSL blinks.
YaST (NetworkManager is useless)
Network Devices - DSL
Config Overview
- DSL Devices - Not detected
- Add - PPP over Ethernet
Mode Dependent Settings
- Ethernet Card
- DS: Connection - Unknown - No IP address assigned
- Configure Network Cards = On Hotplug
Network Settings
- Enable IPV6 (as previously set)
- DHCP Client Options - left blank
Overview
- Unknown Device
- IP Address - Not configured
- Unknown Network Device (no hwinfo)
Edit
- Dynamic Address - Zeroconf
Next
- Loop back to Overview - Unknown Device
OpenSUSE Network :: Unable To Toggle Wireless Device 11.4?
May 20, 2011I finally installed openSUSE along side ubuntu and xp in my ThinkPad EDGENow I am facing issue with toggling the wi-fi, I had no such problem in ubuntu.Seems like there is some issue in the thinkpad-acpi module.I use fn+F9 to toggle the wifi, which toggles both bluetooh and wifi, but on openSUSE it only toggles bluetooth.acpi_listen in ubuntu gives me the below result when I press fn+F9ibm/hotkey HKEY 00000080 00001005but in openSUSE its blank but bluetooth gets toggled. dmesg from ubuntu:
Code:
$ dmesg | grep acpi
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[code]...
OpenSUSE Network :: No Ethernet Device After Installing Updates?
May 26, 2011I'm currently using SuSE 11.4 and after running the full online updates and restarting the machine as YAST suggested, I no longer have eth0/eth1 available.
I'm clueless about what to do since I'm kinda new to Linux and at the moment, I'm trying out all the distros before making a full commitment to anyone. So far, Ubuntu has been trouble-free from day one, but I'm willing to give this distro (opensuse) some slack.
OpenSUSE Network :: Can't Mount Cd / What To Do?
Aug 24, 2010I am using opensuse11.2 but noticed that I am unable to view the contents of the cd once it is inserted. Checked the contents of mnt directory as well as the media directory but they do not contain anything. I would like to know how to view the contents of the cd once it is inserted. Also i would like to know how to erase the contents of a rewritable dvd once it is inserted into the tray. Is it build into the OS that we can erase the contents of the cd once it is inserted. Please help me as to how I can view the contents of the cd once it is inserted and also how i can erase the contents of a rewritable cd once it is inserted and mounted.
View 2 Replies View RelatedOpenSUSE Network :: Cannot Install USB Modem Device For Internet Connection / Way To Do
Feb 14, 2010I recently installed Open SUSE 11.2. It's a pretty cool OS. Anyway,sadly enough, I cannot access my internet connection via my USB internet modem. Worst of all, Open SUSE cannot detect the USB modem device. I am currently new to Linux and I may be overlooking something. I also clearly figured that Linux online is better than Linux offline from what I read from blogs and numerous posts. So in essence, I cannot fully appreciate the true power of Open SUSE 11.2 offline. Would there be a way to install my USB modem device?
View 1 Replies View RelatedOpenSUSE Network :: Kernel Device Eth0,wlan0 Are Not Present?
Feb 27, 2011I have installed Open SUSE in my DELL server which has 2 broadcom NIC cards, it showing both the NIC cards in Network configuration in YAST ,but it showing as not configured and not connected . Kernel device eth0,wlan0 are not present. In device manager also 2 Broadcom nic cards are detected.
View 4 Replies View RelatedOpenSUSE Network :: Cannot Mount The NFS Export
Oct 20, 2010I am running OpenSuSE 11.3. I cannot mount an export from a Redhat 9 NFS server.I am able to mount the export from RHEL5, Ubuntu, Fedora, Solaris but not OpenSuSE 11.3. This is the command I use from a Ubuntu Karmic box.
mount server:/exportdir /mnt -o vers=3,proto=udp
As I said it works from many other distros, but not sure why no go on this one. Can anyone explain this? Should I submit a bug? I noticed portmap is not used anymore and am wondering if thatmay have anything to do with it. The rpcbind is supposed to handle this from what I read..not sure if this is accurate.
OpenSUSE Network :: NFS Mount Of XFS Fails On 11.3
Jan 12, 2011I've just upgraded to 11.3 (64 bit) and the nfs client does not quite work. I have 3 mounts I try to make, and 2 out of 3 work. The third seems to mount, but shows an empty directory. There are no errors in /var/log/messages on the 11.3 client or the server. The only difference between the 3 mounts that I can see is that the failing mount is of an xfs system. The other two happen to be ext3. Is that visible to the nfs client? Or is that a red herring? I can still mount all 3 just fine from my other opensuse 11.2 systems.
For info, the server is running opensuse 10.3...
Code:
nas:~ # uname -a
Linux nas 2.6.22.19-0.2-default #1 SMP 2008-12-18 10:17:03 +0100 i686 athlon i386 GNU/Linux
OpenSUSE Network :: Huawei E 1750 - Connect In Live Cd - Recognize The Device
Oct 16, 2010i tried to connect whit this key on opensuse 11.3 but i can't the device is recognized i start to connect it and the system show me "activating" but the light never comes blue , it's always green and it's impossible go to internet i use kde..
View 1 Replies View RelatedOpenSUSE Network :: Unable To Mount The NFS Entries?
Aug 1, 2010been searching google and forums for about 5 hours now, and can't figure this one out, I have a server running opensuse 11.2 sharing various NFS directories, I have one laptop that is running 11.2 and I have no problem getting my NFS shares from the server.On my other laptop that is running 11.3, I had the shares working at one point, but changed things around and added a new HD to the server, now I can NOT get this thing to work, I have tried everything I could find to read on it. Started and stopped the NFS server and exportfs -a, and checked /var/logs/messages on server and nothing about this laptop (192.168.0.102 suse 11.3) trying to connect.On this laptop, I have deleted all the shares, and tried to re-add them but still get this error everytime.on server /etc/export:
/home/kryptic/ *(rw,no_subtree_check,sync)
/backup/Media/ *(rw,no_subtree_check,sync)
/backup/Dales_Backup/ *(fsid=0,crossmnt,ro,root_squash,sync,no_subtree_check)
[code]...
OpenSUSE Network :: Nfs Doesn't Mount At Boot
Aug 17, 2010I use a RAIDON unit (SL3610/3620-2S-LB2 - set up with RAID1 and NFS) as a file server and want it to mount at boot. My /etc/fstab entry is
10.10.10.2:/mnt/md1/ulimnt /home/uli/ulimnt nfs rw,hard,intr 0 0
But the system does not mount at boot. SO after the system booted up the command (as root) mount -t nfs 10.10.10.2:/mnt/md1/ulimnt /home/uli/ulimnt mounts the system without problems Of course I can add a login script - but why does it not work at boot System is opensuse 11.0 - network with if up
OpenSUSE Network :: Mount A Webdav Location?
Feb 25, 2011How can I mount a webdav location to my 11.3 pc at home so I can access the same files that I do via my ipad while I am on the move.
I have an mobile-me account therefore I use idisk.
I would like idisk mounted so it appears as a folder on my desktop at home, so I can edit the same documents without having to upload and download using a web browser.
is this possible?
the idisk url is https://idisk.me.com/YourMemberName/
OpenSUSE Network :: Mount NAS But Only Have Read Only Permission
Sep 11, 2011I am completely new to Linux and picking things up slowly. I have a question about mounting my NAS NV+. When I mount it, i use the following commands when logged on as user "matt":
sudo mount -t cifs -o rw,username=Matt,password=matt //192.168.2.15/Matts /home/matt/GRUMPY/Matts
sudo mount -t cifs -o rw,username=Matt,password=matt //192.168.2.15/Torrents /home/matt/GRUMPY/Torrents
sudo mount -t cifs -o rw,username=Matt,password=matt //192.168.2.15/Media /home/matt/GRUMPY/Media
sudo mount -t cifs -o rw,username=Matt,password=matt //192.168.2.15/Programs /home/matt/GRUMPY/Programs
GRUMPY is the name of my NAS by the way! It mounts properly, BUT i cannot delete or rename files, so basically the user "matt" has read only privileges, and root has ownership of the mount. How do I go about mounting these so that user "matt" has RW privileges?
When I log on as root user and mount them, I can read and write as required, so this has led me to believe that my problem lies in my permissions for matt when mounting them... I posted on the netgear forum and was asked to try and mount using the following command:
[Code]....
OpenSUSE Network :: 11.2M5 Mount T Cifs Terribly Slow
Aug 20, 2009I used command as followings. nothing special. mount -t cifs //192.168.55.53/windows$/Home /mnt/ -o user=username%password It works well after mounted. But mounting itself takes 1-2 minutes terribly. After mounted successfully, file transfer speed looks to be normal.
View 9 Replies View RelatedOpenSUSE Network :: 11.2 - Unable To Mount NFS Shares On Server
Jan 2, 2010I have a Thecus NAS with nfs support running. Now I switched from OpenSUSE 10 to 11.2 on the client side and aren't able to mount my nfs shares. With SuSe 10.0 I didn't have any problems.
The /etc/exports:
/raid/home_nas1 192.168.0.24/31(rw,no_root_squash,sync,anonuid=99,anongid=99,no_subtree_check)
/raid/soundandmore 192.168.0.24/31(rw,no_root_squash,sync,anonuid=99,anongid=99,no_subtree_check)
On the client side I'm able to see the shares:
showmount -e nas1
Export list for nas1:
/raid/home_nas1 192.168.0.24/31
/raid/soundandmore 192.168.0.24/31
The client address:
inet addr:192.168.0.27
I'm using nfs-3:
mount -t nfs nas1:/raid/soundandmore/mnt
mount.nfs: access denied by server while mounting nas1:/raid/soundandmore