Fedora Installation :: Update A Fresh Install Of The 64-bit Desktop Edition?
Jun 25, 2011
As the thread title suggests, I am getting error messages while trying to update a fresh install of the 64-bit desktop edition. Here are the errors:
Code:
Traceback (most recent call last):
File "/usr/share/PackageKit/helpers/yum/yumBackend.py", line 2316, in _update_packages
txmbr = self.yumbase.update(po=pkg)
File "/usr/lib/python2.7/site-packages/yum/__init__.py", line 3761, in update
available_pkg, updated_pkg)
[Code]...
View 2 Replies
ADVERTISEMENT
Oct 1, 2009
I recently finished a fresh reinstall of Fedora 11 on my ASUS EeePC 1000HA today. Once I rebooted, it asked for the usual "first time user thing" and I proceeded. After that screen, I was brought to the loging manager, so I logged in, and was presented with my destkop. I fired up the terminal, added myself to the sudoer's file and did a "sudo yum update" but was given the following error (the beginning of the text got cut off due to how lengthy the update list was): [URL].
View 3 Replies
View Related
May 13, 2010
can i install ubuntu 10.04 Netbook edition in my laptop? Is there any drawback in installing in laptop? which one is better-netbook edition or desktop edition?
View 4 Replies
View Related
Sep 8, 2010
I have a problem to install the VMware Server (VMware-server-2.0.2-203138.x86_64.rpm) on "Fedora 13 Desktop Edition 64-bit".I traied all tips I found, but nothing was OK.Please look my linux configuration and the error messages:
(VMware installation)
[root@localhost BKP]# rpm -Uvh VMware-server-2.0.2-203138.x86_64.rpm
Preparing... ########################################### [100%]
1:VMware-server ########################################### [100%]
The installation of VMware Server 2.0.2 for Linux completed successfully.Before running VMware Server for the first time, you need to configure it for your running kernel by invoking the following command: "/usr/bin/vmware-config.pl".
code....
View 4 Replies
View Related
Jun 12, 2010
I just installed 10.04 on an Acer 4736 laptop and was prompted for a software update of about 170 MB.
I went through with the update downloads and installation, got an error message of some packages not being found, and clicked on the "close" button on the dialogue to finish with the whole thing.
Now the Update Manager window with the grayed-out package updates didn't go away, and the cursor would always show the "busy" circle thing. I waited for a while, but nothing happened. I tried opening Firefox to check for anything about this on the net, but it wouldn't open.
So I left it alone, and it the screen went black (screensaver, I guess). When I tried to get back to the desktop, I couldn't. Screen wouldn't respond and it stayed black; no password prompt or anything.
Ctrl-Alt-Backspace wouldn't take me back to the login screen either.
View 3 Replies
View Related
Jun 15, 2011
I just upgraded to Fedora 15 this afternoon from the install DVD.
When I try to do an update with the software update app I get an transaction error:
could not add package update for upstart-1.2-4.fc15(i686)updates: upstart-1.2-4.fc15.i686
Here is what rpm reports as being available:
When I tried yumex I get a different error:
View 2 Replies
View Related
Mar 22, 2010
The last version a Linux I had was Mandrake v9.1. However, in looking to get the latest/greatest Linux I downloaded Ubuntu and Kubuntu. After installing Kubuntu the system reboots and fails to boot into the OS. After the P.O.S.T all I get a the word "GRUB". There is no response to any keys with the exception of Ctrl-Alt-Del. I am temporarily able to get passed the boot problem if I boot from the CD and choose boot from primary hard menu option. I'm not sure how to fix the boot up problem and could use some advice. However, using the CD to boot up the hard drives installation leads me to my next problem.
While in a desktop session I am unable to drag windows by their title bar. When attempting to drag a window, the desktop becomes covered with parts of the original window spreading all over the screen in multiple directions. It looks like a kaleidoscope or bad acid trip image. I suspect the video anomalies might be configuration related or improper driver. Again guidance would be greatly appreciated here.
I have a good 'ole Matrox MGA Millenium card installed into a P4 1.8ghz system, with 512 MB ram. The hard drive originally had an old install of Mandrake v9.1, but all of the partitions were wiped and I created 3 new partitions:
- /dev/sda1 20GB Bootable/Primary Partition EXT4 (Unbuntu mounted at /)
- /dev/sda2 18GB Primary EXT4 (Kubuntu mounted at /mnt/Ubuntu_dsktop_91)
- /dev/sda3 2GB Swap space
My intent was to install Ubuntu on the 2nd primary partition and be able to switch between them. However, I tried installed Ubuntu on the first partition (reformatted of course) and I encounter the same boot problem and display problem.
View 1 Replies
View Related
Sep 22, 2010
i have win 7 ultimate running (32bit) on intel core 2 duo (64 bit) laptop.i have downloaded 32 bit version of ubuntu 10.04 and the wubi today. my win is running on C drive (primery partition). i have not enough space in c drive. can i install ubuntu in E drive
View 1 Replies
View Related
Oct 26, 2010
I have been setting up a box now and have it configured with everything I need and is running great.I would like to test out the netbook remix edition is there a way to install the desktop environment along site with Gnome (like I use to do with KDE)Would be great so I wouldn't have to re-configure drivers and such.To be able to switch from Gnome environment to Netbook remix environment.I am running Ubuntu 10.04.
View 5 Replies
View Related
Mar 28, 2011
I just installed Linux Ubuntu Desktop Edition on my Acer Aspire T671-TB7Z, the installation went smooth but the internet is not working. When I login the background blinks 3 times, and I can't move the mouse, after that I can. But the real problem is I am not very experienced with Linux but the wireless icon does show up and I can access wireless networks, I am connected, but when I load a page on Firefox it says it is on "work offline" so I unticked it and tried again. Nothing worked again, this is weird because I am using it now to post this thread on my sisters netbook and on the pc that has the problem has Windows 7 Ultimate as a dual boot and the internet works fine on that too, the only internet problem I have is linux.
View 4 Replies
View Related
Feb 16, 2010
I recently bought an F12 DVD (from a UK supplier) which I took to be a "full distribution". But looking back on the web site it was not described as such. After booting I selected the Replace Existing Linux System option and it listed the installation of 204 packages - much smaller than the 933 packages when I installed F9.
The kernel is now FEDORA (2.6.31.5-127.fc12.i686.PAE)
My problem is that I am now faced with a very intimidating terminal. I am sure the installation did not offer a graphical interface. I have tried to get Gnome running by following the Installation Guide :-
1) 7.4.2 Booting into a Graphical Environment
I type in -gedit /etc/inittab
and I get back --bash: gedit: command not found
2) 15.3 Switching to a Graphical Login
I type -yum group install "GNOME Desktop Environment"
Response -Error: Cannot retrieve repository metadata (repomd.xml) for repository: fedora. Please verify its path and try again.
3) Again under 15.3 - bullet point 3)
Type -/etc/inittab
Response --bash: /etc/inittab: permission denied
I have now run out of ideas. I'm sure it is not supposed to be difficult but I don't understand the implications of the command line responses. I really don't want to be condemned to a win dependency.
View 8 Replies
View Related
Jul 25, 2010
i requested a CD for my laptop... and i want to install it.My problem is: Can i use the Desktop Edition for my Laptop?
View 7 Replies
View Related
Apr 7, 2011
how to install packages in ubuntu..I am very new to Linux I am using ubuntu desktop edition 10.10
View 1 Replies
View Related
Sep 1, 2010
Is there any log file created during the installation? (10.04 desktop edition) If there is, where is it stored?
View 2 Replies
View Related
Dec 2, 2009
I have just installed F 12 - clean install- but when I go to get updates today (Dec 2nd) no updates appear.I have done yum clean and yum makecache but still no updates available in software updates
View 8 Replies
View Related
May 28, 2011
I decide to install F15 (other machines run F14) and after a pretty smooth install and reboot, I try to login and get the message "Oh no, something has gone wrong. A problem has occurred and the system can't recover. Please log out and try again". But no matter how long I try, I keep getting this message. Then I go to crt-alt-F2, and try to "yum install gnome-panel". Then it shows that I don't have any network connection at all, even though I did install my network. I'm thinking of installing F14 now.
View 2 Replies
View Related
Oct 16, 2010
I installed ubuntu 10.10 and everything works perfectly, but whenever I go to shutdown/restart, after showing the ubuntu logo (just like when you log in), the logo goes away, and it just hangs/freezes there.
I've tried waiting even for 10 minutes, but nothing. It there anything I can manually edit for it to just shutdown? If it helps here is my PC...
[URL]
...and to be specific the WLAN module is a Ralink RT3090.
View 5 Replies
View Related
Jan 31, 2011
I know it is possible to install a Ubuntu Server Edition and later on 'upgrade' it to a desktop edition by doing
Code: sudo apt-get install ubuntu-desktop But, as I understood it, this installs apps like OpenOffice and such too... Now, is it possible to install the ubuntu-desktop-GUI (so, actually GNOME) without installing all of the unwanted apps Apps I actually need are pulseaudio, transmission and samba, which I prefer to install separately.
View 1 Replies
View Related
Jun 29, 2010
I have already installed Ubuntu from an USB drive, however everytime I have to install it on a desktop/laptop or netbook, I have to "burn" the USB again, so I wonder if there is any way to have both (Ubuntu desktop and Netbook Edition) on the same USB drive and choose wich one you want to install at the boot moment.
I usually have the ISO images and copy the files to the USB with the "Startup Disk Creator" utility built in Ubuntu or eventually with Universal USB Installer or UNetbootin...
View 3 Replies
View Related
Mar 27, 2009
All, just did a freash install of fedora 10, and I have no sounds at all. Speakers work and are pluged in (everything works fine with my ubuntu partition) Nothing appears to be muted in alsa or on the gnome volume control Sound card = Creative Labs CA0106 Soundblaster
[code]...
View 4 Replies
View Related
Jul 31, 2009
I just downloaded the F11 x64 DVD iso, and I when I try to install it, after the media check screen, Anaconda starts it load, but it says "X failed to start, falling back to text mode" (or something like that).
The install goes through (in text mode), and all that gets installed is the basic environment.
My specs:
- AMD X2 Phenom II 550 Callisto
- 4gb DDR2 800 memory
- 1tb Samsung SATA / 100gb Western Digital SATA
- 2x XFX Geforce 9600gt 1gb
- ASRock K10N780SLIX3-WIFI motherboard
I've tried Ubuntu x86 on the same system, but I was having issues with it, so I decided to try FC11 instead.
View 7 Replies
View Related
Dec 8, 2009
Ok, I booted with the live cd and used Fdisk to delete all partitions and wipe the drive. I used the "Replace existing Linux system" install option and let it roll. So I reboot to the screen Flashing a _ then just black...System Info:GIGABYTE GA-EP45-UD3L LGA 775 Intel P45 ATX Intel Motherboard Intel Core 2 Quad Q6600 Kentsfield 2.4GHz 2 x 4MB L2 Cache LGA 775 Quad-Core Processor MSI R4850-T2D512 Radeon HD 4850 512MB 256-bit GDDR3 PCI Express 2.0 x16 HDCP Ready CrossFireX Support Video CardSeagate Barracuda 7200.10 ST3250410AS 250GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard DriveKingston HyperX 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel Kit Desktop Memory Model KHX8500D2K2/2GRYes i did just copy my old newegg orders I'm brand new to fedora as well so I apologize if this a newb mistake.---------- Post added at 05:54 PM CST ---------- Previous post was at 03:41 PM CST ----------Update: I went and wiped the drive again and tried a different install method (use entire drive)After rebooting i spammed esc and got into grub and loaded fedora in nomodeset After going thro all the lisence and reg stuff it prompted me to log in, I did and once again im left with a black screen with a _
View 11 Replies
View Related
Jun 7, 2010
I'm currently running F11 and am trying to replace it with a fresh install of F13, using the same partitioning layout. I downloaded the F13 i386 DVD ISO using bit torrent. (The sha256sum of my downloaded ISO matches the reference sha256sum value.) I'm trying to do the fresh install of this ISO from hard drive (without burning a DVD). Last summer I did the same procedure of installing a downloaded DVD ISO from HDD when replacing F9 with F11. The installer (Anaconda 13.42) proceeds to the point where I specify my custom partitioning layout. It then prompts me about storing a boot loader. Shortly after I reply to that, the installer gets an "unhandled exception".
rpmdb: Program version 4.8 doesn't match environment version 4.7
error: db3 error (-30971) from dbenv -> open: DB_VERSION_MISMATCH
The only nonstandard thing I did was the following. According to the F13 installation guide, for installation from HDD the file "install.img" from within the ISO files must be copied to a directory named "images". The F13 installation guide gives the following procedure:
mount -t iso9660 /path/to/Fedora13.iso /mnt/point -o loop,ro
cp -pr /mnt/point/images /path/images/
umount /mnt/point
Instead, I used "Archive Manager" to extract "install.img" from my DVD ISO. I copied it to a directory named "images".
View 9 Replies
View Related
Sep 14, 2010
I've installed F13 on a DELL computer. Everything works fine except that under KDE menu if I click on 'shutdown', I have the confirmation windows but the computer never shutdown. Same issue with the the logout button. If I want to stop my commuter I have to open a terminal and type " shutdown now" or "halt".
View 1 Replies
View Related
Apr 30, 2010
So I downloaded the Ubuntu 10.04 Desktop Edition and burned it to a disk. Shut off my computer and restarted it, booting from the CD Drive. It couldn't find it. So I thought maybe there was an unrecorded write error so I burned it to a second disc. Well after burning it I noticed I can't even see the disc anymore. It doesn't seem to be recognized at all. That explains why it didn't boot from CD.
But what I want to know is why on earth is it basically going invisible and not working? I've never had a problem with burning discs, especially Ubuntu stuff... So why...? Well I just booted up the CD on a different computer and it seems to be working fine. So it appears that my computer simply has ceased to see bootable discs or maybe its just non-empty discs.
View 4 Replies
View Related
Jan 20, 2011
I downloaded and installed the Ubuntu desktop edition and when I boot up I have the options to boot either Windows 7, or Ubuntu (so far so good), however, when I select Ubuntu I get a message saying that the following file is corrupt:
File: ubuntuwinbootwubildr.mbr
status: 0xc000000f
Info: The selected entry could not be loaded because the application is missing or corrupt.
Any thoughts on this? Would just re-installing it fix the problem?
View 2 Replies
View Related
Sep 14, 2010
I just reinstalled my OpenSuse 11.3 with the GNOME desktop. As soon as I was done installing and I was on a fresh desktop, I installed the Yast updates that were available, rebooted, and now I can't login to any of my User accounts. Whenever I try to login, it tells me that it is "Unable to Open Session".o any of you know how I can fix this without having to reinstall all over again
View 1 Replies
View Related
Feb 11, 2010
Every times, after a fresh install of ubuntu karmic, i use update manager for to get all possible updates and regularly on reboot i have a filesystem check with immediate reboot.P.s. I tried also to divide the updates, but in this way happens even twice.
View 4 Replies
View Related
Jun 13, 2010
I'm not sure how you do it, but it seems like you should be able to. How do you upgrade the version to 13 without burning a new CD? I just used slackpkg update, slackpkg upgrade-all, but when I tried install-new it had nothing to do.
View 5 Replies
View Related
Jan 12, 2009
I'm stuck with installing Fedora Core I have 2 hard drives both 80Gb I want to install a fresh copy on one of the drives to do a dual boot I have vista on the main hard drive this is where I am at Installation requires partitioning of your hard drive by default, a partitioning layout is chosen which is reasonable for most users. You can either choose to use this or create your owe. Select the drive to use for this installation?
View 10 Replies
View Related
