OpenSUSE :: Not Able To Open Any Applications After Fresh Update
Sep 27, 2010
Just installed OpenSuse 11.3 kde version on my laptop. After install added few repositories and updated the system. Now the whole desktop looks very polished however problem started after that. When i tried to open Dolphine, Fire fox, Terminal or for that mater any application nothing happens. None of the applications opened successfully. Then i tried to configure plasmoid widgets and for my surprise all worked fine. With this problem i can not login to opensuse desktop.
View 2 Replies
ADVERTISEMENT
Sep 14, 2010
I just reinstalled my OpenSuse 11.3 with the GNOME desktop. As soon as I was done installing and I was on a fresh desktop, I installed the Yast updates that were available, rebooted, and now I can't login to any of my User accounts. Whenever I try to login, it tells me that it is "Unable to Open Session".o any of you know how I can fix this without having to reinstall all over again
View 1 Replies
View Related
Jan 2, 2010
I just installed Ubuntu 9.10 and at some point I realised that the Update manager application will not open when I click on it the hard drive spin a little but nothing happens.I realized that the Software sources et Hardware drivers apps are in the same states. I was not able to see after what operation/installation I did that I they stop working.I am a beginner with Linux, and I feel that if I reinstall I will fall into the same hole .
View 8 Replies
View Related
Feb 24, 2010
My question to the community is should I preform a fresh install of OpenSuSe 11.2 or upgrade my current version of OpenSuSe 11.1? As of current I just use my system to surf the web check, email and Basic Business needs. The specs of my Laptop are:
OS Information
OS: Linux 2.6.25.20-0.4-default i686
Current user: jraglin@Jada
System: openSUSE 11.1 (i586)
KDE: 3.5.9 "release 49.1"
[Code]...
View 9 Replies
View Related
Jan 6, 2011
I have installed Suse 11.3 on my computer yesterday but since then I have been trying to update it but unable to do so. Everytime I try I get this error message: "system management is locked by the application with pid 6953 (usr/sbin/packagekitd). close this appliaction before trying again."
View 8 Replies
View Related
Mar 16, 2010
when the properties of a file change the default application, such as pdf or okular for gwenview for photos and to open these from the nautilus is opened as if they were full screen.
How can I correct this?
View 8 Replies
View Related
May 17, 2011
When a new instance of a running KDE 4 application (kwrite, konqueror, etc.) is run under opensuse 11.4 with KDE4 it seems that the default behaviour is to open a new tab in the running instance.
This occurs when the new instance is called from the command line; the start menu; the run dialogue; or a desktop icon, even when called from a separate desktop. In konqueror the menu option <File> <new window> opens a new tab and seems redundant.
How can a user force KDE 4 applications to run a new instance in a separate frame / window when another instance of that application is already running?
View 5 Replies
View Related
Jul 29, 2010
I am running a week old 11.3 install with KDE (no desktop effects), compiz, nvidia. Last night I was working away. I had Thundertbird, Firefox, and VMWare Workstation open. Maybe something else, but I don't remember.
I was typing away. Maybe I hit something on the keyboard, but maybe not. All apps just disappeared, meaning that they're windows were not open and were not minimized to the panel. I could open *new* windows, and I fire up a terminal and ran top, which showed that they were all running, just not visible. Obviously, this is a Bad Thing.
View 7 Replies
View Related
Jul 31, 2010
I am looking to update from 11.1 to 11.3. My question is would it be better to update my current setup, or do a fresh install of 11.3? I was never able to get 11.2 to install no matter what I tried so I gave up on it and went back to my tried and true 11.1. What is the best way for me to get 11.3 on my computer?
View 4 Replies
View Related
Oct 1, 2010
I have a while(1) loop, and the error is: glibtop: open (/proc/stat): Too many open files This error occurs after about a half hour to an hour of running. I've tried running this multiple times, both with using glib_close() at the end of the loop, using glib_init() and glib_close() at beginning/end, and just using glib_init(). The strange thing is these have no effect on the actual glib_get functions.
View 5 Replies
View Related
Mar 17, 2009
I have a MS Access database I would love to able to use in OOo. How do I do it
View 2 Replies
View Related
Jul 15, 2011
I had to reinstall OpenSUSE after I reorganized my hard Drive partitions... I was trying to update the system when I encountered an ERROR: Problem connecting to a software origin There was a (possibly temporary) problem connecting to a software origins. DETAILS File"/repodata/repomd xml' not found on medium [URL] My repositories too seem all right.
View 8 Replies
View Related
Feb 1, 2010
I had a fresh install of centos 5.4 x64 on my newly bought lenovo thinkstation D20, the installation went smoothly. after I finished adding users and reboot,I get pass the grub, starting the services, and then.. just blank screen, get nothing there and stuck, can't get into gnome, only option is to power off.the same happens if I install scientific linux, basically same with centos. I also can't boot the scientific linux live cd(the same thing happens, after starting the services, blank screen and stuck). however, I can boot Fedora live cd. but all I want is an EL5.
View 5 Replies
View Related
Jun 28, 2011
Yesterday I switched from CentOS to Ubuntu, and wanted to install TeamSpeak3 which runs on ports 9987 UDP and 10011 TCP. The TeamSpeak3 worked fine on CentOS before this.
It appears to be running and netstat -an reports:
Code:
udp 0 0 0.0.0.0:9987 0.0.0.0:*
tcp 0 0 0.0.0.0:10011 0.0.0.0:* LISTEN
I believe the only firewall for Ubuntu is "UFW", am I correct? If so, "ufw status" reports:
Code:
Status: inactive
I do have other things running on UDP (Counter Strike Source servers) and people can connect just fine.
When I telnet localhost 10011 I get a response from the TeamSpeak3 server:
Code:
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
TS3
Welcome to the TeamSpeak 3 ServerQuery interface, type "help" for a list of commands and "help <command>" for information on a specific command. However, telnetting from outside just gets no answer, this is what leads me to believe it is a firewall in the way.
View 4 Replies
View Related
Jun 28, 2011
I recently preformed a full update to my openSuSe 11.3 x64 + gnome install. Everything was running fine before the update however post a number of features have stopped working or have changed. I used the command zypper up to update everything. The errors I've been recieving are as follows, Wastebasket
Won't open on via Desktop or Places menu. Gives the following error "Could not display "trash:" File Is Of An Unknown Type". If I drop things on the Wastebasket the files do go to /home/USERNAME/.local/share/Trash/files but I can't Empty Wastebasket upon right click as the option is highlighted out.
Computer Icon If I try to open it from link in Places menu I get the error Nautilus cannot handle "computer" locations.. The link to it has also disappeared from the left hand panel if I have a Nautilus window open.
Mounted Icons Previously I used to have 4 drives mounted;
1 network (NFS),
1 encrypted (TrueMount),
2 Windows (partitions of main machine)
Out of these only the encrypted and network drive showed on the Desktop and two Windows drives would stay mounted under /windows but have no icon on the Desktop. After the update, all these drives are on the desktop and but the only way to not have them appear on Desktop is to set Gnome config not to show any of the icons on Desktop. Although these are independent errors, they are all related to folders (at least indirectly) so I felt it was better to group them together to give a better picture of the issue.
View 9 Replies
View Related
Feb 11, 2010
Every times, after a fresh install of ubuntu karmic, i use update manager for to get all possible updates and regularly on reboot i have a filesystem check with immediate reboot.P.s. I tried also to divide the updates, but in this way happens even twice.
View 4 Replies
View Related
Jun 13, 2010
I'm not sure how you do it, but it seems like you should be able to. How do you upgrade the version to 13 without burning a new CD? I just used slackpkg update, slackpkg upgrade-all, but when I tried install-new it had nothing to do.
View 5 Replies
View Related
Oct 1, 2009
I recently finished a fresh reinstall of Fedora 11 on my ASUS EeePC 1000HA today. Once I rebooted, it asked for the usual "first time user thing" and I proceeded. After that screen, I was brought to the loging manager, so I logged in, and was presented with my destkop. I fired up the terminal, added myself to the sudoer's file and did a "sudo yum update" but was given the following error (the beginning of the text got cut off due to how lengthy the update list was): [URL].
View 3 Replies
View Related
Feb 13, 2011
I just installed Debian 6 & prior to my first update my sound worked fine. But after accepting all the updates based on the repositories below the system can't identify my sound card.
deb cdrom:[Debian GNU/Linux 6.0.0 _Squeeze_ - Official Snapshot amd64 LIVE/INSTALL Binary 20110112-01:05]/ squeeze main
[URL]
Sound Card (1st one / second is built in audio on a video card)
joe@Tux-Box:~$ lspci | grep -i audio
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)
01:00.1 Audio device: nVidia Corporation Device 0be9 (rev a1)
Errors (outside of just not being able to play any audio)
joe@Tux-Box:~$ alsamixer
Cannot open mixer: No such file or directory
When I try to open sound applet in pannel ->
No volume control GStreamer plugins and/or devices found.
joe@Tux-Box:~$ cat /proc/asound/cards
--- no soundcards ---
- The user is part of the audio group.
- I was playing around with run levels and if I
ctl -alt F2
log in as user
su -
password
init 5
hit reset on the computer.
When it reboots I have sound. I attempted changing /etc/inittab but after rebooting no sound. I am still unsure of what to do.
# The default runlevel.
id:5:initdefault:
# was 2 above at install - sound came on at 5
View 2 Replies
View Related
Oct 14, 2010
I've been a long time Debian user but now I'm working with Red Hat and I'm a bit lost. I just installed a fresh install of CentOS 5.5 on a new Dell server. Dell provides a current Red Hat 5.5 driver for mpt2sas. How do I install this driver?
The Dell instructions are not that helpful. They explain an RPM Install and a DKMS Install - what's the difference between the two?
View 2 Replies
View Related
Jul 21, 2011
I have installed Centos 5.6 on a fresh VPS. After install I ran yum update command. After update was finished I noticed a message saying "Your system kernel may have been updated. Current kernel (2.6.18-238.e15) has been changed to : 2.6.18-238.12.1.e15)". When I reboot, I see two boot option in GRUB. one is Centos 5.6 (2.6.18-238.12.1.e15) Default and other is Centos 5.6 (2.6.18-238.e15). When Centos boots from default, it fails with fatal error. But when I boot with other option, the system boots as normal.
I need to know how to resolve this situation. Why yum update results in Kernel update and 2nd option in GRUB boot loader. and why Centos refuses to boot with update Kernel.
View 10 Replies
View Related
Jun 15, 2011
I just upgraded to Fedora 15 this afternoon from the install DVD.
When I try to do an update with the software update app I get an transaction error:
could not add package update for upstart-1.2-4.fc15(i686)updates: upstart-1.2-4.fc15.i686
Here is what rpm reports as being available:
When I tried yumex I get a different error:
View 2 Replies
View Related
Jun 25, 2011
As the thread title suggests, I am getting error messages while trying to update a fresh install of the 64-bit desktop edition. Here are the errors:
Code:
Traceback (most recent call last):
File "/usr/share/PackageKit/helpers/yum/yumBackend.py", line 2316, in _update_packages
txmbr = self.yumbase.update(po=pkg)
File "/usr/lib/python2.7/site-packages/yum/__init__.py", line 3761, in update
available_pkg, updated_pkg)
[Code]...
View 2 Replies
View Related
Jan 16, 2011
I'm getting a tad frustrated. Having gone down a dead end on this thread: [URL] I reloaded 10.10, wiping out previous install. Everything was working as it should. I then updated (today, Sept 16, 2011) When rebooted, the system went right to a grub prompt.
View 9 Replies
View Related
Mar 1, 2009
I've been kind of spoiled by Slackware, where updating an installation without networking is just a matter of storing all the updated packages somewhere (directory, CD, USB, etc.) and doing a:
Code:
upgradepkg *.tgz
I'm trying to figure out how to achieve similar simplicity on Ubuntu (specifically, Ubuntu 8.10). I know how to update the packages on the live CD itself (and have done it several times), but in this particular case I need to install using the unedited, official CD.
I'm currently looking at this (and will set up a VirtualBox image to try it out), but it seems to me like the actual packages are never even mentioned in the article, only the meta-data. I need to be able to do an apt-get update/upgrade on this box and have it use the updated packages which I will have stored on a mounted filesystem.
View 4 Replies
View Related
Aug 25, 2010
I'm running Ubuntu 10.4 netbook remix on an Asus Eee PC 1001PX.
uname -a says:
Linux localhost 2.6.32-24-generic #41-Ubuntu SMP Thu Aug 19 01:12:52 UTC 2010 i686 GNU/Linux
I can't open the GUI for most of the applications in system > administration and some in system > preferences. In preferences IBus preferences, Main Menu, Prodcast Preferences, Ubuntu One are affected and in administration only Disk Utility, Login Screen, Synaptic, Network Tools, Time & Date, Users & Groups, Update Manager do start (Sorry, that I state the apps that run, but this list seemed shorter to me.). There's just a notification prompted that the program is started but then nothing happens.
Further, the update manager posts a notification in the panel that "A problem occurred when checking for updates." I have the feeling that this occurred at the same time as I couldn't start the programs anymore. Up to now I wasn't able to find out what the problem is, but I didn't touch the software sources. I read threads about similar problems and there something seemed to be mixed up with the files /etc/hosts and /etc/hostname. But I checked on that and it's fine in my case.
View 9 Replies
View Related
Feb 21, 2010
I can't get many applications to open on my ubuntu 9.10. As far as I know, it's in a fresh install state, so it shouldn't be missing dependencies....For example, if I try and open Pidgin, it'll appear on the taskbar for a few seconds and disappear again. Running in terminal gives:michael@linuxserver:~$ pidginBus errormichael@linuxserver:~$ I also can't get Movie Player, Empathy or evolution to open
View 3 Replies
View Related
Jun 12, 2010
I just installed 10.04 on an Acer 4736 laptop and was prompted for a software update of about 170 MB.
I went through with the update downloads and installation, got an error message of some packages not being found, and clicked on the "close" button on the dialogue to finish with the whole thing.
Now the Update Manager window with the grayed-out package updates didn't go away, and the cursor would always show the "busy" circle thing. I waited for a while, but nothing happened. I tried opening Firefox to check for anything about this on the net, but it wouldn't open.
So I left it alone, and it the screen went black (screensaver, I guess). When I tried to get back to the desktop, I couldn't. Screen wouldn't respond and it stayed black; no password prompt or anything.
Ctrl-Alt-Backspace wouldn't take me back to the login screen either.
View 3 Replies
View Related
May 23, 2010
- open terminal and type gconf-editor - apps -> metacity -> global_keybinding and look for panel_main_menu - right click and edit, change value to "Super_L" without the quote.
View 2 Replies
View Related
Jan 7, 2011
i've tried different vncservers and with all of them, when i use vncviewer, i'm unable to open some applications. for instance, i can open firefox and terminal. but other programs are giving me problems, like google chrome or the disk manager, which will open for a split second and then disappear. i am so mad i've looked all over the place for a couple days and ready to pull my hair out. i've installed vnc4server, tightvncserver, and a couple others i can't think of right now.
View 1 Replies
View Related
