1. Why do we need to use virtual simulation software such as VirtualPC, VirtualBox and VMWare to install linux?
2. Why linux OS always came with newer version and updates?
I'm looking to install either vmware server, virtualbox or another solution.
Which works the best with fedora 11? I'm interested in USB and performance.
btw, I wasn't sure which forum to put this in
An error accoured during the root filesystem check.
Installed fresh Slack 13.0 version, at 7GB virtual hdd, with cfdisk, created two primary partitions, 500 mb for swap, whats left, to second partition, made it bootable, installed full software package, used all default selections, only refused to configure network. At first restart, I got a screen with many statements, that looks like errors, and a last one, that looks like critical error.
An image I have been working on Windows my whole life and only worked with already installed linux systems a bit. Installed RedHat and FreeBSD on VirtualPC previously and succesfully. Now, I stumble upon this error and cant think of next step.
Is it possible to install CentOS on a VMWare virtual disk?
And if it is, how many MB is necessary for CentOS 5.6?
I completed the installation of VMWare Server 2.0.2 onto a CentOS 5.4 64-bit distribution. There is a VMware virtual machine file on the server in question, and I want to activate it through the application console.
I did not see anything readily apparent that would facilitate the importing of the virtual machine file. Does anyone have a procedure that can accomplish this task?
I have installed CentOS on a VMwareWorktation and that CentOS, i also install VMware Server (suscess) and setup a guest OS that, but i start this Guest OS, an error show "You may not power virtual machine in virtual machine"...
View 3 Replies View RelatedMy computer has 512 mb ram..i am using xp..i want to install ubuntu 10.04 within this xp(without dual booting).I heard about virtual machine such as virtual box or vmware player that help us to do the same..so i want to ask which one will be good practice vmware or virtualbox..remember i have only 512 mb ram...
I have also doubt regarding these quereis..
1) can i install software of my choice in ubuntu after installation.
2) can i access internet by ubuntu
3) if i keep some data in ubuntu...will it be kept there also after machine shut down.
Actually i did dual booting xp and ubuntu..i succeed but sometimes my computer get stucked due to low memory..
I want to install Linux on a virtual machine (VMWare ESXi). My PC runs W7 64-bit. Can I install the new 32-bit Fedora Linux in a VM environment?
View 10 Replies View RelatedMy laptop is running Linux Mint 9 and I am trying to install Fedora 13 in a virtual machine within Virtualbox. However, it's not working. It takes forever to get past the initial white/blue loading bar when it first boots and then it just goes white, so I can't see anything. I've already tried modifying the bootline parameter of the live CD to include noprobe, noacpi, noapic, nousb, and nofirewire. However, the result is the same. Am I missing something? Is it possible to install this?
View 1 Replies View RelatedI have a problem with my wired connection. The problem started when I tried and failed to install vmware virtual machine.... now I have no internet connection at all that I can see. This is output of:
ifconfig
eth0 Link encap:Ethernet HWaddr 90:e6:ba:97:64:f0
inet6 addr: fe80::92e6:baff:fe97:64f0/64 Scope:Link
[code]....
I had installed vmware player in my windows 7 OS. How to work on virtual consoles in vmware player were I had installed linux.
View 11 Replies View RelatedI am trying to configure VMWare tools to work with the linux-virtual kernel, but every time I supply the headers path to vmware-config-tools, it rejects it. What should I do to configure it?I am using the path:/lib/modules/2.6.35-23-virtual/build/includeBut I get the rejection message:The path "/lib/modules/2.6.35-23-virtual/build/include" is not valid.It works with the generic version, so what am I doing wrong?
View 2 Replies View RelatedI'm running a 64bit Version of Windows 7. I'm also dual-booting 64bit Ubuntu 10.04 (if it matters). However, for this I'm trying to get this working on the Windows 7 side of things. I downloaded the BackTrack 5 32bit GNOME .iso file (BT5-GNOME-32.iso) to my USB stick fine and made a VM on VMware Player. I set the OS as "Other Linux 2.6.x kernel" (if it matters). However, when I go to play my VM I get the following screen. I know I'm supposed to type Startx to launch the GUI. However, nothing happens; it's completely unresponsive (and yes keyboard focus is routed to the VM). There is no response, the cursor doesn't even blink.
View 1 Replies View RelatedI am looking for a very particular sound wave simulation program. To get an understanding of what i want let me describe it to you in a different way.
Imagine your look at a bowl of water from above and you poke the water at a specific frequency you will see wave patterns showing. Well im after a program that can generate that pattern with any particular frequency that i set, and to allow me to place different shapes and objects around the sound source or sources (i may want to use more than one sound source that may or may not be at the same frequency as first.) and see what kind of reflections i get.
I was also wondering if instead of a point sound source you could have an entire shape giving off a specific vibration. This will give very interesting results that i am also after.
There are some programs that show sound simulations that i have described but nothing that can do the requirements that i desire. Do any of you guys know of any programs that can do this? if not how much would it cost to build such a program?
I am an administrator of a student lab with 20 PCs. I was thinking of a way to protect those machines in the long run with the presence of some students with destructive behaviour. The most suitable solution to install a Linux OS and use virtual machines to load Microsoft OS. This way once the OS fails I can simply replace the VM with a clone that was previously made.
The point is that most students have no experience with Linux, that's why I need to load the Virtual machine automatically at login and in full-screen view so that The startup process ends up in Microsoft OS through the virtual machine (VMWare based) in Linux platform.
update : I'm using Fedora13 Linux distribution. I believe that part of launching the VM in full-screen is more difficult than automatically launching VMWare at startup. Is there some way I can tell VMWare to launch a particular virtual machine in full-screen when it starts on boot?
Right now I am using some software to emulate a null modem serial cable on my Windows computer connected to itself. For development purposes I need to have a null modem connection to a linux computer from a windows host. Is there any method of doing this virtually?
View 2 Replies View RelatedI created an archlinux vm guest using virtualbox on my windows desktop at work. I'm planning to use it for django development because there are no unix machines available to use as a workstation at work.
From the vm guest I can ping/ssh to other machines in the network, but not the other way around. It's like even though the guest machine has an ip address on the network and a hostname, neither is recognizable.
I'm mounting a shared folder in an arch linux guest on a windows 7 host in Virtual Box. The shared folder's filesystem is ext3 and is mounted in windows 7 with Ext2Fsd. I mount the shared folder at boot with this fstab:
D_DRIVE /home/tony vboxsf rw,gid=1000,uid=1000,auto 0 0
I believe my user in the guest OS has the right uid and gid:
[tony@kiwi ~]$ id uid=1000(tony) gid=1000(tony) groups=1000(tony),1002,(vboxsf)
I can create files and remove them fine, but I can't seem to create directories.
[tony@kiwi ~]$ mkdir foo mkdir: cannot create directory `foo': Protocol error
Its weird because the directory looks like its there, sort of.
[Code]...
I mount a few locations from a VMware virtual machine, but currently every time I start up VMware I need to re-mount the locations once the VMware image has started up fully, which gets tedious. I'd like to be able to mount them automatically when VMware is started.
I generally double-click the .VMX file (which is associated with VMware Player) to launch the virtual machine, but once it has finished loading I would need to run the mount commands manually or execute a bash script that does it.
Is there any way you can think of to have it done automatically? One way I can think of is to start my virtual machine by running a script that starts VMware player, sleeps for a minute or so, then runs the mount command - but setting the right sleep interval would be difficult because this varies a fair bit - and overall, it's a solution that's kinda icky and that I'd like to avoid if there's some better option.
I installed Vmware and the installaion failed. I want to remove it and go back to using VirtualBox (simply because I am familiar with the software). However I am having some problems removing VMWare from my pc. It does not appear in the ubuntu software center and was wondering what command I can use to remove it. sudo ap-get remove vmware does not work (maybe my command is wrong?).
the installation did not complete, it installed fine from the installer (.sh file) however once I start it up it starts to install other components ie. Networking etc. This is where it does not finish installing.
Is a VMWare image compatible with Virtualbox? Or do I have to install VMWare to use the VMWare image. I only ask as I prefer Virtualbox.
View 1 Replies View RelatedI have on my computer 9.1 and I want to try some virtualization. I want to install WinXP or 7 as guest on my U9.1 box. what is your opinion? Which VMware or VirtualBox should I try?
View 1 Replies View Relatedhow do I switch to the text-based virtual terminals when using Fedora under VMware? I believe that normally you use ALT-CTRL-F2 through ALT-CTRL-F6, and F1 switches you back, but the ALT-CTRL is intercepted by VMware to allow you to switch back to the host OS.
View 5 Replies View RelatedSwitching between text consoles in a Linux virtual machine When the CTRL + ALT + F1 key combination is used to switch to another text console (terminal) on a Linux virtual machine, the host switches to a text console instead of the guest. Resolution The CTRL + ALT combination is used by VMware to direct the keyboard input to the host. Press CTRL + ALT + Space , press the F1 key (or desired Function key) while still holding down CTRL + ALT .
View 2 Replies View RelatedI am using vmware and virtualbox for experimenting with different linux distros and for using windows... When I switch to full screen, the upper portion(about 50px from top) of system becomes unusable because I am not able to click with my mouse anywhere there. So ubuntu's top panel becomes unaccesible and for vmware, once it becomes full screen I am not able to minimize/restore/close it.
In full screen mode, looking at the mouse cursor, it seems to be controlled by guest system when in full screen but as soon as I move it to top of the screen, the host machine takes control of it and then I cannot access any top panels or vmware toolbar. Is there any solution to this problem... Please let me know if more information is needed from my side.I am using opensuse 11.3, KDE4.4.4, vmware 3.1.2/virtualbox 3.2.10. The problem is for both vmware and virtualbox.
making My simulation graphs in Ns-2.34 in ubuntu how i can make them. my simualtion is about Home automation lighting control and i wnated to make 6 graphs1) time VS Residaul energy ( remaining enregy of the nodes)like sensors (we have mentioned Insteon sensor and Switchlinc Dimmer)use 9V battery in them. the 9V should be converted in joules and Energy on Y-axis should be in Joules and time on X-axis should be of simulation timeThe graph would be showing after running the simulation 3000 times how much energy is remaining or how much energy is consumed in the nodes after sending 2000 packets.2) Packet size Vs Delay, Delay on Y-axis and Packet size on X-axis with there units and the graph would be showing if Pacjet size increases how much delay is created.3) Throughput Vs Badwidth. througput on Y-axis and Bandwidth on X-axis4) Packets Loss Vs data rate5) Packets sent Vs data rate6) Packets received Vs data rate
View 8 Replies View Relatedim doing my final year project on wireless network simulation using ns2.. how to simulate protocols in ns2.
View 1 Replies View RelatedIs it possible to install Snow Leopard 10.6.6 VMware AMD edition (which I downloaded) on VMware linux? It is under Windows 7 so I just need to know if everything of VMware linux (like Hardware Virtualization) is the same under linux as for Windows.
View 1 Replies View RelatedMy goal is to install Windows 7 on a virtual machine running on Ubuntu. The Lenovo machine came with Windows 7 installed, but did not come with a boot disk. What are my options? Should I ask Lenovo for a disk? Will I need to purchase Windows just for the virtual machine?
View 3 Replies View RelatedI have an HP Compaq nx6125 laptop, which has an AMD Turion 64 2200MHz processor, running Windows 7 Ultimate. I have installed the VMware Workstation 6.5.2 [full] trial and am attempting to install Fedora 11 on a virtual machine.
I understand that the Turion processor is a 64 bit processor, so I downloaded the Fedora 11 x86_64 DVD iso image.
First I have to create a VMware virtual machine (VM) and choose a version for it. If I choose a version that is any of the 64 bit options (for example, "Other Linux 2.6.x kernel 64-bit", since there are specific options for RHEL but not for Fedora), I get an error message the moment I try to power on the VM and start the install, saying "The buslogic SCSI adapter is not supported for 64-bit guests in this release [...]". Then the VM just shuts down.
I guess this laptop does have a SCSI bus, but my disks are IDE and as far as I can see (System Information) the SCSI bus is not used (?).
On the other hand, if the VM I create is any of the 32-bit option versions, I get what seems to be just a warning, saying that I'm running a 64-bit guest OS (Fedora 11) on a virtual machine configured to run a 32-bit OS, and suggesting I change this to ensure the 64-bit guest OS will function correctly. What would be the risks / downsides of forcing the install anyways?
I will also ask for help on the VMware side, too, and it's not my intention to turn this into a VMware discussion, but I'm just wondering if anybody on the forum has worked with this combination (VMware 6.5.2 and Fedora 11 running within it, preferrable on an HP Compaq 6125 running Windows 7 Ultimate) ? If so, I'd really appreciate some feedback / pointers.
I used to work a lot with Linux back in the days of RH5.2, and it's been a while, plus I'm new to the virtual machine world, so bear with me here.
