Debian Hardware :: TV-Tuner With Alsa With Jessie No Sound

Jul 11, 2015

I've got a Leadtek TV2000 Expert tuner and it was connected with my soundcard on motherboard succesfully. Before many years it worked percectly with my early Ubuntu version 7.04 and 8.04 - that used the AUX for soundlevels in the alsamixer. In TVTIME I've get all my TV-channels but without sound...

Always when I run tvtime it sends me:

"mixer: Can't open device /dev/mixer, mixer volume and mute unavailable.
mixer: No such mixer channel 'aux', using channel 'line'."

I've got this in the .asoundrc file:

pcm.!dmix {
type dmix
ipc_key 1024
slave {
pcm "hw:0,0"
channels 6
period_size 1024

[Code] ....

And everything works with sound - but tvtime can't...

View 8 Replies


ADVERTISEMENT

General :: Recording Sound From TV Tuner Card Thorough Alsa Driver On Ubuntu

May 28, 2011

I have a TV tuner card with its output connected to the CD in of an integrated sound card. Video is OK, and the sound also gets thorough (to the line out) when running xawtv, for example. However, I found no ways yet for recording it.I'm running Ubuntu 10.10 with ALSA drivers. Pulseaudio was running in the beginning, now it doesn't, but it doesn't seem to make much difference.

capturing with VLC, using plughw:0,0 as the audio capture device. (Result: no sound track at all in the resulting video.)arecord, then aplay.alsamixer. The capture source is set to "CD" (and on the input side it's also "CD" where I can effectively modify the volume for audio going through...), but still no result.

View 2 Replies View Related

Debian Multimedia :: My Sound - ALSA Or Pulseaudio?

Jun 18, 2010

I am using a couple of Debian Distro (Sid and Lenny) add some Ubuntu into the mix. I made the switch because I was amazed and satisfied with Debian --> once installed, everything works. For me that's okay for o so many years now. I don't question a lot because it just works and I do my job on it satisfactorily. Namely programming the LAMP style programming. Lately I have been using Debian to communicate over the internet -- using Skype and Pidgin and other such things, not to mention listening to music, watching movies, just using the default applications when I originally install Debian.

Along the way, I need to configure something -- that is desktop related -- like the screen resolution of a new LCD monitor replacing the old one and such. Now about my sound -- I'm not touching it because it is working. But that is not the case always. Now I have a constant error -- it is irritating. Rhythmbox don't make a sound always when I have open a web browser (iceweasel, chrome, epiphany) and a site with multimedia object on it -- like a video or something. So how do I correct this? How do I know, too what I am using -- ALSA or Pulseaudio?

View 1 Replies View Related

Debian Hardware :: ALSA - No Sound In Certain Apps

Nov 15, 2015

So I've got a new system on which I had to re-install Debian, and I've been trying to fix the sound today, but it doesn't seem to work... I've kept the same ALSA configuration (except a minor adjustment to the card number as this system appears to have two cards instead of one), but it doesn't seem to work as expected. I got this weird error while running an app that uses ALSA:

Code: Select allALSA sound driver initializing...
ALSA lib pcm_dmix.c:1024:(snd_pcm_dmix_open) unable to open slave
    --> (Device: default)...Failed: Operation not permitted

In VLC it works fine, provided that I manually choose the right device under Audio -> Audio Device.here's my /etc/asound.conf:

Code: Select alldefaults.ctl.card 1

pcm.dsp {
    type plug
    slave.pcm "dmix"

[code]....

View 12 Replies View Related

Debian Hardware :: Jessie - No Sound On PC

Oct 10, 2014

I don't know id it was after and update but the case is that I have no sound in my pc.

Code: Select all$ aplay --list-devices
aplay: device_list:268: no soundcards found...

Code: Select all$ ls /proc/asound
ls: cannot access /proc/asound: No such file or directory

Code: Select all$ cat /proc/version
Linux version 3.16-2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-11) ) #1 SMP Debian 3.16.3-2 (2014-09-20)

[Code] .....

View 14 Replies View Related

Debian Hardware :: No Sound On Jessie

Jan 13, 2016

check if your sistems detects your cards
Code: Select alllspci | grep Audio
check it alsa detects your saund cards:
Code: Select allaplay -l
try to initialice your drivers
Code: Select allalsactl init

Run Code: Select allalsamixer and check master and all volumes are at max, use <F6> to select cards.Install PulseAudio.Code: Select allaptitude install pulseaudio and check you have selected the correct output audio device.If the problem is a wrong selection try: Code: Select allecho "options snd-hda-intel model=generic" >> /etc/modprobe.d/alsa-base.conf or Code: Select allecho "options snd-hda-intel index=#CARD NUM#" >>

/etc/modprobe.d/alsa-base.conf
(if you most likely have an intel card)
check card numver with:
Code: Select allcat /proc/asound/cards

Just installed a Debian on my pc. I had to install the nvidia official drivers to get my card working (GeForce GTX 750 Ti)But i have no sound (in my Windows partition sound works fine). The sound cards are apparently recolonized and loaded but i get nothing.

Code: Select alluname -r
3.16.0-4-amd64

Code: Select alllspci | grep Audio
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 9 Series Chipset Family HD Audio Controller
01:00.1 Audio device: NVIDIA Corporation Device 0fbc (rev a1)

[code]....

then reboot, didn't work/Then i tryed to install the official Realtek ALC887 drivers from their page but get error compiling and no answers of how to fix it

Code: Select allerror: implicit declaration of function ‘fget_light’ [-Werror=implicit-function-declaration]
  file = fget_light(fd, fput_needed);

didn't work/After that i pluged my pc to a friends HDMI tv and i got sound when i change PulseAudio aoutput. So i guess the nvidia card sound works, but my headphones and speakers that i own don't. Finlay i disabled my sound card on BIOS and alsa stop recognizing the cards even after enabling them again.

View 2 Replies View Related

Debian Configuration :: ALSA Sound Setup To Use Card1

May 13, 2011

Alsa is currently using my HDMI port to play sounds through using card0 "ATI R6xx HDMI". I'm on a laptop and I want to be able to use my laptop speakers and headphone jack so how do I set alsa to use card1 which is "Conexant CX20582"?

View 8 Replies View Related

Debian Multimedia :: No Sound From ALSA - Softmodem Dead Too

Dec 17, 2010

In the process of trying to get the softmodem working, I finally attached speakers to this laptop and tried to play some sounds. Nothing but silence. Both the KDE system sounds and a stand-alone player (noatun) produce nothing. No error messages that I can find, either. (That might explain why the softmodem is dead, too...) I've run alsaconf several times, and even uninstalled and reinstalled ALSA. It thinks it is working, but is not. What sorts of things do I need to check to find where it isn't working?

Info: The motherboard is a FIC 3500W with the VIA P4M800 integrated chipset. This includes the VIA 8237 sound system, which is what ALSA detects and tries to use. The machine also has a Realtek ALC655 but I don't see any drivers for that in the lsmod output, so this is a possible source of the trouble.

View 11 Replies View Related

Debian Multimedia :: ALSA - Sound From 1 Source Being Played Only

May 29, 2011

I decided to break free from the horrible life of a windows vista user. I like my new debian (Wheezy) installation and everything worked fine so far. Now I stumbled upon a huge problem. When I want startup and login into my gnome installation the first application I open gets to play sound and others after that just don't work. I looked endlessly on google but in my understanding the problem is within the ALSA driver.

Some specs :
OS version : Debian 7 (Wheezy)
Laptop brand : Packerd Bell Easynote LJ-65
Kernel installed : 2.6.38-2-686 (Standard one in wheezy)

View 4 Replies View Related

Debian Hardware :: ALSA Won't Recognize Sound Card?

Jan 6, 2011

I know sound is a recurring issue around here, but I can't find any posts/FAQs that address my particular problem.

Here it goes: When I first installed ALSA, I unsurprisingly had no sound. OK, no big deal, I'll just un-install and re-install ALSA and see if that helps. No, instead ALSA won't even recognize my card.

lspci shows:

00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
alsactl init gives:
alsactl: init:1743: No soundcards found...
alsamixer:
cannot open mixer: No such device or address
aplay -l:
aplay: device_list:235: no soundcards found...

View 14 Replies View Related

Debian Hardware :: Alsa Can't Find Sound Card

Mar 27, 2011

since upgrading my desktop I've had trouble getting my old sound blaster audigy working. I've disabled the motherboard's on board sound in the bios. My new desktop is built around the Intel i7-2600K. I have a suspicion that maybe linux isn't playing nice with the pci-e to pci bridge that has replaced native pci support but I have no evidence of this. The sound card works fine in windows. The card is detected

[Code]...

View 1 Replies View Related

Debian :: Sound Mute On Jessie (by Default)?

Jul 6, 2015

Why is sound mute on debian jessie (top right icon) ?

View 1 Replies View Related

Debian Multimedia :: Sound Converter In Jessie

Feb 20, 2015

I am using Jessie. 64 bits. I have been using Sound Converter in other distros (LMDE, Ubuntu, etc) in the past.Jessie has Sound Converter 2.1.3. I think I have installed the needed codecs. When I try to convert from mp4 to mp3, the program gets stuck, and nothing happens. Other formats can be converted.

When I use SoundKonverter (also in Jessie, version 2.1.1) it works with no problem, converting from mp4 to mp3. Nevertheless I would prefer to use Sound Converter.

View 2 Replies View Related

Debian Hardware :: No Sound After Switching To Jessie

Sep 18, 2015

I've recently switched from Wheezy to Jessie and can't get sound to work.

It worked properly in Wheezy with the same hardware configuration.

I've searched web for possible solutions but couldn't have found the symptoms

similar to mine, i.e. no hw listed by aplay -l:

Code: Select all#aplay -l
**** List of PLAYBACK Hardware Devices ****

Remaining info:

Code: Select all#lspci | grep Audio
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 9 Series Chipset Family HD Audio Controller

[Code] .....

View 1 Replies View Related

Debian Hardware :: Crackling Sound On Jessie

Sep 19, 2015

So whenever I start-up and after I enter my passphrase for cryptsetup (before login manager) I hear this crackling sound from my speakers constantly throughout usage.

While watching a movies or playing Youtube videos it's less noticeable, but when I'm typing up or working it really gets frustrating.

I've tried to figure out if pulseaudio was the culprit. uninstalled and rebooted yet crackling and pops continued. I haven't yet altered or messed around with ALSA or snd_hda_intel driver. But I did notice while using Audio Mixer, muting the speakers section stopped the crackling ...

So I guess the problem lies with Alsa or snd_hda_intel or both?

lspci -v
Code: Select all00:1b.0 Audio device: Intel Corporation Atom Processor Z36xxx/Z37xxx Series High Definition Audio Controller (rev 0e)
   Subsystem: Toshiba America Info Systems Device f91b
   Flags: bus master, fast devsel, latency 0, IRQ 108
   Memory at d0910000 (64-bit, non-prefetchable) [size=16K]
 
[Code]...

View 0 Replies View Related

Debian Hardware :: After Jessie Upgrade No Sound

Dec 23, 2015

After upgrade no sound. I tried "alsactl init" fix and that worked for awhile. Now even that isn't working.

Also tried the following:

# /etc/init.d/alsa-utils reset
[ ok ] Resetting ALSA...done.
# /etc/init.d/alsa-utils restart
# alsactl init
Found hardware: "HDA-Intel" "Realtek ALC898" "HDA:10ec0899,38421034,00100003" "0x1034" "0x3842"
Hardware is initialized using a generic method

View 14 Replies View Related

Debian Hardware :: Alsa Mixer Selected But No Sound With Squeeze

May 18, 2010

I just bought an HP Pavilion dv7-1273cl and it works excellent except for the sound and the webcam, the result for lspci is as follows:

lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)

Gnome volume control shows that HDA Intel(Alsa mixer) is selected and as a default the speaker is muted, if I unmute it, an infinite loop-like sound plays and no application seems to have access to the sound, I believe the correct module is installed by default, and the webcam does not work as well. I'm using debian squeeze i386.

View 5 Replies View Related

Debian Hardware :: ALSA - Cannot Play Sound As Regular User

Jan 27, 2011

I've been having some issues with my sound card since I cannot play a sound with my current user. As a root user I can play sounds with "aplay" but as my regular user, I can't play anything

# aplay file.wav
ALSA lib confmisc.c:768:(parse_card) cannot find card '0'
ALSA lib conf.c:4154:(_snd_config_evaluate) function snd_func_card_driver returned error: No such file or directory
ALSA lib confmisc.c:392:(snd_func_concat) error evaluating strings
ALSA lib conf.c:4154:(_snd_config_evaluate) function snd_func_concat returned error: No such file or directory
ALSA lib confmisc.c:1251:(snd_func_refer) error evaluating name
ALSA lib conf.c:4154:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:4633:(snd_config_expand) Evaluate error: No such file or directory
ALSA lib pcm.c:2211:(snd_pcm_open_noupdate) Unknown PCM default
aplay: main:564: audio open error: No such file or directory

# sudo aplay file.wav
Playing WAVE 'file.wav' : Signed 16 bit Little Endian, Rate 8000 Hz, Mono

I have add my user to the audio group with no success
usermod -a -G audio myuser

View 2 Replies View Related

Debian Hardware :: ALSA Sound Not Persistent In Games Or System

Jul 26, 2011

I recently changed from Gentoo to Debian Squeeze. All went fine but I have an ALSA issue. I have an AMD Athlon II X4 board with a Nvidia (Realtek) sound chip. After installing I got a lot of "no such device" errors, so I installed the Realtek driver the Debian way and the errors vanished. I could successful run alsactl init and alsamixer.

At this point there is no sound neither in games nor system. alsaplay says (on the screen) that it is playing a wav file but there is no sound. My test ''dd if=/dev/urandom of=/dev/dsp'' complains "/dev/dsp : no such file or directory". Well, all clear. modprobing the snd-*-oss modules brings sound alive but I have to do this after every restart. I have no clue how to make this persistent the Debian way.

View 6 Replies View Related

Debian :: No Sound On Jessie And Snd-hda-intel - No Codecs Found

Aug 7, 2015

I can't get the sound to work. The soundcard doesn't seem to be corrupted (works on both Hackintosh and Windows 8 ), but it looks like alsa won't recognize it on Debian:

aplay -l
aplay: device_list:268: no soundcards found...

View 4 Replies View Related

Debian :: No Sound In Headphones On Asus Eee 1001PX With Jessie

Sep 23, 2015

I recently bought a used Asus eee 1001PX. It came installed with some spyware called windows which I replaced with jessie. Everything works great but one thing. When I plug in headphones I get no sound in the headphones. If I have some audio running and plug them in while it's playing it doesn't cut the audio from the built in speakers off like it should do. If I start and look at Output Devices in pauvcontrol it seems like it at least recognizes that I have headphones inserted.

I didn't have a chance to test if the physical audio jack was broken while it had Windows running on it but assuming that it's not physically broken, what might be wrong? I know very little about audio, alsa, pulse and that kind of stuff so I hardly know even where to start.

Some info:
Code: Select alllspci -v

00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02)
        Subsystem: ASUSTeK Computer Inc. Device 8437
        Flags: bus master, fast devsel, latency 0, IRQ 44
        Memory at f7cf8000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2
        Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+

[Code] ....

View 3 Replies View Related

Debian Multimedia :: Sound Is Tinny After Upgrading To Jessie

Jan 16, 2015

I upgraded my system from Wheezy to Jessie and now the audio is tinny. It sounds like a lot of the bass is being chopped off. This happens in YouTube's HTML5 video player, VLC and whatever player it is that Thunar launches for avi files.I'm using Xfce as my desktop, if that matters.I looked around for an equalizer app for pulseaudio but was surprised to find that the there isn't one, or at least not one which is still maintained.

View 0 Replies View Related

Debian Multimedia :: Upgraded To Jessie From Wheezy - No Sound

Jan 22, 2015

I upgraded to Jessie today and found that I have no sound.

Code: Select all# uname -a
Linux ath 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt2-1 (2014-12-08) x86_64 GNU/Linux

There is no sound card on the motherboard. Sound worked previously through HDMI from a Nvidia GTX570

Code: Select all# lspci|grep Audio
09:00.1 Audio device: NVIDIA Corporation GF110 High Definition Audio Controller (rev a1)

Code: Select all# aplay -l
aplay: device_list:268: no soundcards found...

[code]....

View 8 Replies View Related

Debian Multimedia :: Sound Juicer Broken In Jessie

May 24, 2015

I installed Sound Juicer but all it does is say "cannot read tracks". Playing the music CD works fine otherwise in other programs so it's definitely not the system or CD.

Tried on another computer with Jessie to be sure and I got the same thing there.

I suppose I can just use a different program but wondering if it's just me or if it's something to report ?

View 3 Replies View Related

Debian Hardware :: Upgrade To Jessie Broke Sound

Jun 22, 2015

I upgraded from Wheezy to Jessie yesterday and no longer have sound. I don't think anything is muted. I checked alsamixer and everything is on. MOC, VLC, speaker-test and aplay are all giving me errors. MOC refuses to load.

Code: Select allccc@de:~$ speaker-test

speaker-test 1.0.28

Playback device is default
Stream parameters are 48000Hz, S16_LE, 1 channels
Using 16 octaves of pink noise
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
Playback open error: -2,No such file or directory
Code: Select allaplay /usr/share/sounds/alsa/Front_Center.wav
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
aplay: main:722: audio open error: No such file or directory

Code: Select allccc@de:~$ mocp
Running the server...
Trying JACK...
Trying ALSA...
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
Trying OSS...

[CODE]....

Should I have a normal alsa-base.conf file?

View 3 Replies View Related

Ubuntu Multimedia :: Tuner Card Not Feeding Sound Through Onboard Sound?

Aug 9, 2011

I am setting up a mythtv/xmbc box on Ubuntu 10.10 (natty does not install on my hardware). I have a Sabrent TV PCIRC tuner card, which seems to work fine with the proper card and tuner settings. My on-board sound is HDA-Intel surround sound, which I have configured as analog duplex.

Currently the sound works fine through my speakers plugged into any jack on the back of the PC (two speakers, one jack). I can watch ripped movies and listen to music. The TV tuner is pumping sound from its external jack -- if I hook it up directly to the speakers it works fine. I can feed the Tuner's sound to the line-in on my motherboard, but nothing comes out. In the sound manager, i have the input device selected and the input level shows that the sound is coming in through the connector, and I can test the speakers and they work fine, but they don't seem to be communicating that the sound coming in needs to be pumped out through the speakers.

View 2 Replies View Related

Debian Multimedia :: Alsa, Pulseaudio, ION2 & HDMI Sound Output?

Apr 29, 2011

I have recently acquired a Lenovo Q150 machine and attempting to use it as a HTPC. I've been reading that with this platform a newer kernel is required to make wireless, sound and a few other tweaks work correctly--so I bumped up to testing repositories to upgrade to the 2.6.38 kernel.[URL]...

The audio on this device has been more than a pain. I'm currently using XBMC to play media on this device and after setting the outputs to custom: plughw:1,9 sound is played correctly. I found this out by using alsamixer, selecting the sound card with the F6 key (Nvidia 1) unmutting all outputs, quiting, and running speaker-test -D plughw:1,X where X is the sub-device from the output of aplay -l until sound could be heard from the receiver.

Now my problem is that applications like mplayer, and iceweasel won't output any sound. I'd prefer not to use the optical out on the device and would like to send sound over HDMI. Has anyone had any luck getting it to work as it should?

I've also installed pulseaudio, not too sure if this is really needed. I've also used module assistant before upgrading to compile alsa from source, it worked but i just decided to upgrade the kernel instead of dealing with m-a every time an update comes through. Linux floppy 2.6.38-2-amd64 #1 SMP Thu Apr 7 04:28:07 UTC 2011 x86_64 GNU/Linux

apt-cache policy alsa-base
alsa-base:
Installed: 1.0.23+dfsg-2
Candidate: 1.0.23+dfsg-3

[Code]...

View 1 Replies View Related

Debian :: Alsa - No Mixer Elems Found - Get No Sound After Compiling Kernel

Oct 18, 2010

After compileing my kernel i get no sound. I tried : alsaconf - choose my sound card - everything is all right, but when i try alsamixer i get : No mixer elems found

[Code]....

View 3 Replies View Related

Debian :: Install Alsa-driver-linxant Which Didn't Succeed And Now Don't Have Any Sound

Mar 27, 2010

I had normal sound... i did try to install alsa-driver-linxant which didnt succeed, and now i dont have any sound... i can see a red cross near my volume icon.

here's some output:

upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.59
!!################################

[code].....

View 3 Replies View Related

Debian Hardware :: Sound Not Working With IBook G4 Running Jessie

Mar 22, 2015

I am having sound issues with iBook G4 running Debain Jessie. I am dual booting Ubuntu_MATE 15.04 and Jessie on the same HD. For PowerpC iBooks and PowerBooks you need to manully load the snd-aoa-i2sbus module in order to open alsamisxer so you can set you PCM Channel. I have done this when I ran Jessie on my PowerBook and sound worked with no issues. Now on this iBook I have ran both Lubuntu and Ubuntu-MATE with sound working by using this method. However when I installed Jessie I loaded the module, got aslmixer to load and set my PCM Channel but no sound.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved