Initially the sound was working fine in my ubuntu 10.04 lucid. Headphone jack was not working. I downloaded and installed following packages in order to upgrade alsa.
alsa-driver-1.0.15rc3.tar.bz2
alsa-firmware-1.0.15rc1.tar.bz2
alsa-lib-1.0.15rc3.tar.bz2
alsa-utils-1.0.15rc1.tar.bz2
Now there is no sound. Whole system is fried. I don't know what happened.
after installing alsa package, i have no sound.
View 1 Replies View RelatedI don't have any sound after installing Linuxant ALSA driver. I tried uninstalling it and the hsf driver, didn't help. Reinstalling ALSA didn't help either. Ubuntu doesn't detect my sound card, and aplay doesn't detect my sound card. lspci -v output for sound card:
Code:
00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1)
Subsystem: Acer Incorporated [ALI] Device 0126
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 10
[code]....
I'm using Ubuntu 10.10 and I had the sound on my Toshiba satellite laptop working and everything is fine-except for the built in mic..no response at all, I had to switch to windows whenever I want to use the mic "etc, skype calls"I Googled a little bit and upon this adviseI disabled alsa drivers using the commandssudo update-rc.d -f alsa removesudo update-rc.d -f alsa-utils remove and then downloaded oss debian package and installed it, as the advise said.But the result now is that I have no sound at all !! no mice nor speakers...any clue how to fix this ? how to enable alsa drivers again and return to"speakers working-mic not working ?
View 7 Replies View RelatedI have installed xubuntu version 10. My sound card is a Yamaha dS-1S, and seems to be properly configured. Alsa mixer doesn't indicates any error. However, I can't manage to get any sound. I have checked that jacks are correctly plugged.
View 4 Replies View RelatedI'm running Kubuntu 9.10 X64, and am using ALSA for my sound. I have no trouble with sound: VLC, Adobe's Flash plugin, Java, etc. all work properly. When I run the Gnash standalone player, sound does not work at all.
When I run Gnash in a terminal, I get this:
Quote:
I am using linux mint 9 with kernel 2.6.32.29. I upgraded from alsa 1.0.23 to 1.0.24 using the alsa upgrade script. Sound was working just fine before on my Asus Xonar DS, However, my nvidia geforce 430's hdmi audio card is not recognized in 1.0.23 but it is in 1.0.24. Though the card is detected, I have no sound on either cards now.
View 2 Replies View RelatedI want to get the source codes of the RPM package alsa-driver-1.0.20-78.el5.i386.rpm, but I don't know where I can find it,
View 2 Replies View RelatedI have Ubuntu Lucid. If i dont' mistake, it should be possible to hear several applications playing sound simultaneously, with ALSA. But if 1 app is already playing, then starting a second one give always "device is busy".
View 2 Replies View RelatedI recently converted an amd 64 bit WINdows machine to Lucid 64 bit. Everything has gone well. I had numerous issues with Pulseaudio that I removed it. Sound with Alsa has been great, including system theme sounds. I can record via a mike as well. What I cannot do is to capture sounds coming through the sound card. When I record I am getting empty files. The mixer indicates that there are two capture devices. Here is some data on my audio card.
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC888 Analog
[ALC888 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 1: ALC888 Digital
[ALC888 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: ATI HDMI [ATI
HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
I was having a problem with ALSA, installed OSS, but now nothing works. I want to remove OSS, and reinstall ALSA. I am thinking about reinstalling, but I have all my stuff on here, so don't really want to.
View 4 Replies View Relatedjust used the alsa upgrade script in 10.10 under headers 2.6.35-22 and after a reboot i have no sound. no mixer detects any devices.
View 4 Replies View Relatedbasically, sound will cut in and out. if i'm on videos, whenever sound cuts out, the video will continue for exactly two seconds and stop. sometimes i can reload the videos video, and it'll either play for two seconds without sound, or go normal, but usually for only a little time, not even a minute. similar problems for amarok, spotify and other applications using the sound card. this is the output when trying to restart the alsa demon
code:
root@muspellsheim:/etc/rc.d# /etc/rc.d/rc.alsa restart
loading alsa mixer settings: /usr/sbin/alsactl restore
unknown hardware: "ich4" "realtek alc650f" "ac97a:414c4723" "0x1462" "0x5770"
hardware is initialized using a guess method
/usr/sbin/alsactl: set_control:1255: failed to obtain info for control #11 (no such file or directory)
/usr/sbin/alsactl: set_control:1255: failed to obtain info for control #12 (no such file or directory)
output of /etc/modprobe.d/sound.conf
code:
root@muspellsheim:/etc/rc.d# cat /etc/modprobe.d/sound.conf
alias snd-card-0 snd-intel8x0
alias sound-slot-0 snd-intel8x0
some of the utput of lspci -v
i've tried reconfiguring alsa by using the alsaconf application, which didn't help. the output from restarting the alsa demon, may indicate that the correct driver isn't loaded.
So i upgraded to 10.04 a few months ago, right after it was released. clean install. it worked perfectly out of the box, or so it seemed. I had had sound problems in 9.10 that i didn't experience after i upgraded... until i tried to use some headphones a few days ago. when i connected the headphones, the speakers wouldn't mute. i thought it was no big deal. i had the same issue in 9.10 and it was fixed after i upgraded alsa. i figured i'd try the same thing. I used the same alsa upgrade script i used last time [URL] and it fixed the jack sensing and the sound worked perfectly... for about 5 minutes. after a short while of playing audio, sound would stop playing. i'd stop getting sound from video files, audio files, and even from my browser. i'd have to reboot to get sound again... only to lose it again in about 10 minutes. Now it's regressed to the point where i have no sound even after i reboot.
weird thing is, when i test out an audio file with aplay, it works... even if i just get garbage sound from some mp3 files.
anyway, i've got an HP dv7 and this is my aplay -l output
Code:
sleepee@sleepee-laptop:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 1/1
[Code].....
make sound card recognized by alsa?
Code: !!Sound Servers on this system !!
----------------------------
Pulseaudio:
Installed - Yes (/usr/bin/pulseaudio)
Running - Yes
ESound Daemon:
Installed - Yes (/usr/bin/esd)
Running - No
[Code]....
I've no problems with sound on my laptop - it all works fine but Flash produces no sound at all.
I've got the Pulse audio applet running and when I'm using Rhythmbox it shows that on the playback tab and you can see the signal on the signal bar.
Viewing Flash videos shows the ALSA Plugin but shows no signal on the signal bar.
At least, I think it was the update that broke it. Anyway, my sound was working fine yesterday. I have gone through this thread to try and fix my sound, and it appears that my sound card has been uninstalled.
Step 1. aplay -l
Code:
aplay: device_list:235: no soundcards found...
Step 2. lspci -v
Code:
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 01)
Subsystem: Micro-Star International Co., Ltd. Device 5770
Flags: bus master, fast devsel, latency 0
Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp .....
Code:
sudo modprobe snd-intel8x0
WARNING: All config files need .conf: /etc/modprobe.d/alsa-base, it will be ignored in a future release.
FATAL: Error inserting snd_intel8x0 (/lib/modules/2.6.31-22-generic/kernel/sound/pci/snd-intel8x0.ko): Unknown symbol in module, or unknown parameter (see dmesg)
Last time my sound wasn't working, I was directed to this thread. The script from this thread might work again, but if it will just be erased after every update, I'd like something a bit more permanent.
I'm having issues with soundI cannot view my sound card in Gnome Alsa. It is not muted. It does work I tried to remove myself from the audio group but it won't allow me to i am sudo what might be going wrong when i click the buttons they do nothing in users and groups menu
View 1 Replies View Relatedthe sound stops while playing music or movies and can't be restartet. I already upgraded alsa to 1.0.24.2. I managed to fix the problem somehow after hours of deinstalling and reinstalling alsa and trying loads of things, but I did not really find the cause of the problem.
View 5 Replies View RelatedI had an issue with my mic so I decided to upgrade alsa to 1.0.23 to see if this will fix the problem. I used alsa driver/utils/lib 1.0.23 from alsa-project.org So it fixed it...but now I don't have sound in Flash (youtybe videos, etc.). System sound works perfectly (ev en Skype is working) I'm using Ubuntu 9.10 64bit and Google Chrome browser. flash -> flashplugin-nonfree
View 4 Replies View RelatedI have a problem when installing this package through synaptic package manager. this is :
libpng12-dev
the error is:
W: Failed to fetch http://security.ubuntu.com/ubuntu/po...tu2.1_i386.deb
404 Not Found [IP: 91.189.92.167 80]
my distribution is ubuntu 10.4.
I am having problems getting sound to work. I have pasted my output from AlsaInfo.sh in hopes that someone can assist me. I have been able to fix this with the AlsaCompile scripts for Ubuntu. I am wondering if this is a distro related issue. If not I will gladly send to the alsa project.
[url]
- One sidenote that I will mention is the fact that I DO HEAR SOUND from the following command (and only this command)
Code:
when i plug in my headphones i was getting sound output both from the laptop speakers and the headphones, then i tried changing the sound.conf file and still no success and then i tried reinstalling the alsa - i downloaded the latest alsa-driver and alsa-lib and installed them, but when i rebooted there was no more sound from the headphones when i plug them in. I don't know what to do, i tried reinstalling alsa multiple times but still no success. Is there any way to bring back my previous configuration when i installed slackware ? Or some way to roll back using the installation dvd ?
View 2 Replies View RelatedIs there a way to determine which libraries a package needs before installing the package itself?
View 2 Replies View RelatedI posted my question on Linx.com, but have not received an answer after 75 viewers to my question:
Ok my respected Linux genius. This is my project. First I have a Windows / Linux combo OS set-up!
In my windows, I use the latest realtex sound driver as this gives me complete control with recording output control and Microphone gain control. In the set-up, there is a stereo mixer component with is necessary to engage the direct sound recording from my sound card. To make this all come together, I use a sound recording software [ free sound recorder 9 ] and to convert the recording to a wma, wav, or meg, I use Roxio 10 to produce audio cd's to play on all CD Players.
The challenge for me in Linux is to create the same set-up with Linux applications to produce the same professional results.Presently, my kubuntu 10.04 has Alsa sound drivers, with a version of realtek incorporated. I have the Alsa mixer software as well as Audacity as the sound recorder program. But no matter what I do, audacity depends on the microphone to record, which makes the final recording pure crap. If I lower the microphone boost or gain in my Alsa mix, then Audacity can not record the ambient sound from the speaker output and it will only recognize mono and pulse as the sound method. With the pre mention set up, Who has a set up identical to what is offered to windows that will do exactly the same for Linux. I basically want to record directly from the sound card in my Linux, without depending on using my microphone and then a CD burning program to make the conversion to MPEG or the necessary file format for the burned CD to play in all CD players, not just on a PC) I am trying to stay away from command line language in the terminal. I really need a replacement for Audacity,cause Free Sound Recorder is made for Windows Platform......I need a Linux sound Guru for the answer.I am not doing this to pirate music....I have over 3,450 music track inside my Rhapsody subscription and I like to record music for personal listening on my portable CD player and at 0.99 per track charge to do this in Rhapsody, I might as well by a recording studio and hire the singing artist.Basically in short..I need to know if there is a setting I can engage in my Alsa Mixer panel that will allow me to record directly from my sound card without using my microphone as a default. When I mute the microphone in my Alsa control panel, my Audacity program will not record using the microphone, which I do not want to use anyway. I just want to record straight from my sound card, as this eliminates all hiss, distortion that is inherited with using a microphone.
I should create the bridge between a linear input and output. It is desirable, with possibility to impose effects on a sound. (But it isn't obligatory)
Alsamixer:
lspci | grep Audio:
Quote:
egor@egor-ubuntu:~$ lspci | grep Audio
00:08.0 Audio device: nVidia Corporation MCP79 High Definition Audio (rev b1)
02:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1)
[code]....
Alsa and PulseAudio was installed from PPA.
I have a new install of 10.10 on a Toshiba Satellite with a dual boot of win7. I installed 10.10 and on the first night I swore the headphone jack sent sound to my external speakers (may of been plugged in during install). Then the next day I couldn't get any sound out of the jack. Sound kept coming out of my internal speakers. In win7 the jack worked normally. In Ubuntu I have checked sound preferences and my alsa mixer. There is no listing for a headphone jack (so it is not muted).
[Code]...
I am experiencing problems with the Gnome ALSA Mixer. I installed Ubuntu on my MacBook Pro inside Windows (I am running Windows via bootcamp), and when I am running Ubuntu the sound doesn't work. After researching the problem online, I was told that one needed to download an application called the "Gnome ALSA Mixer", and switch the mute to off (apparently the mute is default). I downloaded the application, but whenever I try to run it the application window is blank. There are no controls of any sort. I was told when installing Ubuntu inside windows that the disk efficiency (I think thats what is was) is very much reduced, but I don't know if this has anything to do with that.
Also, is there a way to prevent the trackpad from registering stimulus while typing? I find it very obnoxious that every time I try to type in my password or the like that the curser clicks off of where I'm typing, so I am constantly having to move the pointer back and re-click in the area I'm trying to type in (if that makes sense).
I am using Ubuntu 10.10 x64 on a Dell Studio XPS
I am unable to get JACK to make any sound from any of the applications which plug into it.
Code:
lspci:
me@TheComputer:~/Desktop$ lspci
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
me@TheComputer:~/Desktop$ cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
[Code]....
I've just bought myself a E-MU 1820M audio interface for use in home recording after seeing online that a number of people have managed to get it working. The card replaces a Terratec DMX 6Fire (which i only managed to get outs from, no in's). I have done everything and anything suggested all on the forums and websites i can find and still no in's or out's at all, and no lights on the dock functioning.
Having tried and failed on a number of things i decided to see if Alsamixer had picked it up, only to be shown a blank grey window with nothing showing. I purged ALSA and started again (I have even done a fresh install of natty in case it was anything else getting in the way that i had done previously) but to no avail. I am using ALSA driver 1.0.24, which is the latest version, and according to the ALSA website, the EMU support was addded in post-1.0.15, so all should be well.