I just installed slackware, and I configured it to automatically boot into x without first checking to make sure x would work. I started X, and I'm not quite sure what's wrong with it, but it's messed up, and I don't know how to get out of it
View 4 RepliesAfter upgrading I also updated abiword and wv from slackbuilds.It complains it can't find libwv-1.2.so.3, although libwv-1.2.so.4 exists.Making a symbolic link gets it to start, although then it complains about libpng and hwile it starts the toolbar icons are not displayed, instead with red X's in their place.What is needed to get abiword easily working on 13.1?
View 5 Replies View RelatedI seem to have detached the menu system from the bottom panel. There also used to be a large 'K' on the left hand side of the panel that I could click to open the menu system - it is gone too.
View 4 Replies View RelatedI have a weird bug : segmentation fault appears when executing the 'retq' instruction of my sigalrm callback in static link...It seems it happens only on slackware...Here is a simple test case, compiled in shared -> no problem, static -> crash...Paste the following script in a file named "test-sigalrm-pack2.sh", and execute it: it will generate the C++ source and a simple build/test script.... Just launch the build script (tst-sigalrm-build).
Code:
#!/bin/sh
#test-sigalrm-pack2.sh
[code]....
I can't think what i've done to make my sound suddenly pack in. One minute all is working well, then its not anymore. The only thing I did in between was install claws-mail yesterday. This evening an error mssage popped up and now no sound.
My card is HDA Intel; The error when i open Kmixer is -
GStreamer was unable to detect any sound devices. Some sound system specific GStreamer packages may be missing. It may also be a permissions problem.
I upgraded to qt 4.7.1 and it broke X. So I reverted to the older version of qt, and x is still broken! when I run startx I get the following error:
Code:
xauth: file /(user)/.serverauth.2474 does not exist
.
Does anyone have current running with X on old ATI hardware? I have a laptop with ATI Mobile M7 and X completely fails to load. There are no errors in the Xorg log file. No failed modules or failure to load a module. The last line in the Xorg log says something to the effect of "VGA0 does not support DRI2".
When monitoring the processes while I start X, I can see xinit load, then X. After the line above is added to the log file, X dies. This is so bad that it takes my entire display with it so I cannot switch terminal. I cannot restart a tty session from a remote connection. The only way to get the display back is to reboot.
I tried the suggestions form this thread to no avail. Recompiling the kernel with "CONFIG_PREEMPT_NONE=y" also had no effect. To get a working system I had to roll back to X from Slack 13, which works fine with current.
Did i missed something with the upgrade? Anything else I should try?
System info
Code:
Slackware-current 32 (with X from Slackware 13)
Kernel: generic-smp-2.6.33-smp
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500]
Ever since I upgraded to Slackware 13.1, my previously functional pcHDTV card worked fine. Since the upgrade, however, I get nothing from tvtime except a blue screen and "No Signal."
I saw this thread, which led me to try rmmod'ing related modules for video4linux and my card, but modprobe'ing everything back in didn't solve the issue.
this morning after the latest updates for slackware-current my mrtg-2.15.2 from slackbuilds failed with
Code:
Bareword "P_DETACH" not allowed while "strict subs" in use at /usr/bin/../lib/mrtg2/MRTG_lib.pm line 1133.
Compilation failed in require at /usr/bin/mrtg line 89. BEGIN failed--compilation aborted at /usr/bin/mrtg line 89. As there's currently no newer version for mrtg on slackbuilds, i downloaded mrtg-2.17.0.tar.gz from oetiker's page and compiled it. Changing path in crontab and it works well.
Running 12.2 on fluxbox, it seems the latest pidgin update has messed with my dock icon- it's no longer the pidgin icon, now I believe it's a generic one. It's not REALLY a big deal, but it kind of bugs me...
Where is this set/how do I go about fixing it?
My recent borked upgrade to -current inspired me to try to come up with a way to sanity-check the lib and bin dirs for broken library symlinks (possibly indicating missing libs) and for binaries and libraries that belong to no installed package, as well as missing dependencies.
This script is the result.
I've checked the script results manually, and it appears to be accurate, so I figured I'd post it here for a second opinion, and/or because others may find it useful too. I'm not aware of another popular method of doing this on Slackware, so here it is:
Code:
i'm running debian lenny - latest stable i have recently installed smartcam (mobile phone as webcam over bluetooth) from .deb package , get errors of unmet dependency , but application works like a charm, unfortunately broken dependences block my aptitude , i cant fix them either as latest stable use older versions of dependences even in backports... how do i mark smartcam package as not broken and release my apt?
View 8 Replies View RelatedI've been trying to fix this problem for quite a few days now and have done a lot of searching on these forums, Linux Mint Forums and some others Google lead me to and have has some success, but am now stuck.I have posted a thread on this same topic on the Linux Mint Forums, but have had no success (if you want check it out at:URL...Originally I received error messages when trying to update involving certain repositories which couldn't be accessed (because they either didn't exist or had been moved) and I hunted these down and changed or removed them.
I have done much searching, etc. and cannot find any broken packages. I have tried many many different commands which have mostly done nothing.I seem to be in a similar boat to this person: URL...
I was having a problem with a fresh 11.04 install and the VPN software I use for work. I found the fix was to upgrade the software, so I downloaded an RPM, converted it to .deb and installed it via dpkg. The install worked and the VPN software now works, but Package Manager says I have a broken package and wants to 'upgrade' to the older broken one. How can I fix this without breaking my VPN SW again?
View 1 Replies View RelatedI have been given the task to install slackware 13.1 over windows. I have downloaded and copied slackware 13.1 on to a disk, and rebooted the computer, but i am not getting what all the tutorials have shown. I have been looking for tutorials that specifically instruct me as to how to install slackware 13.1 on to a windows xp. I am not trying to dual run I just simply want to run slackware and slackware only.
View 5 Replies View RelatedI have a couple questions about Xfoward.
1: How much does it affect securty, over a lan network?
2: Will it cause any other security issues?
3: The most important is can I forwad X11 from a 32 bit slackware to a 64bit slackware
it's possible to compile the 2.6.37 kernel patched with the autogroup patch on a Slackware 13.1 system running 2.6.33.4-smp with 2.6.33.4 headers? I just compiled and installed the 2.6.37-autogroup kernel from AUR on my ARCH setup and I like it especially when using firefox with lots of tabs open and other background apps also running. I did notice a speed and smothness difference in my ARCH testing setup with this kernel patch and I can get same results in 13.1??
View 1 Replies View RelatedI installed slackware 13.1 x86_64 bit with multilib, and its been about a month already, I'm really enjoying slackware but I am being troubled with my nvidia card, and I need to get my 3D acceleration working. And I've been looking around the net for information and kept on trying to make my nvidia card to work but to no avail. I cant get X to start, once I put in a xorg.conf stating to use the nvidia card. After troubleshooting for almost 2 weeks and now at my wits end, I now come humbly looking for help in linuxquestions slackware community forum.I've installed nvidia 64 bit kernel, drivers from slackbuilds (version 256.44). The laptop model I'm trying to get it working is an -ASUS K52J Intel Core i3 2.40Ghz with 2GB RAM and with an Nvidia Geforce 310M with 1GB dedicated VRAM.
View 14 Replies View RelatedI recently installed Slackware Linux 13.1 , and my Wireless is down. I've only installed 3 Linux disto's on my main laptop (Ubuntu 9.10 , 10.04 , and Crunchbang Linux 9.04 , just had Crunchbang), and they all had the same problem. In all three , I was able to enable Windows Wireless drivers and every thing worked. Now , I'm assuming I have to the same ting in Slackware? Sorry , but I have no idea what my wireless card is. But I know that my laptop is a Dell Insprion E1705. One last thing , I did ifconfig and that wlan0 is my Wi-Fi interface. I typed ifconfig wlan0 up to see if that was the problem. After I did that , I got and error message. Then I typed ifconfig wlan0 down to see if it was down and it made wlan0 down. I tried bringing it up again , but I got an error saying it couldn't find the device specified. Also , how do I install XFCE? I really don't like KDE for some reason and would like to install XFCE. I chose XFCE over GNOME (my favorite) because I want to try something new.
View 4 Replies View RelatedI'm happy to announce Linvo 2009.1 rc6. It's a full-featured Linux distribution with a lot of applications by default, including an office suite (OpenOffice.org extended with plugins), a good internet browser (Firefox extended with plugins), a music player that supports music collection and a lot more - Exaile, a video player, and all the available codecs. It can open all types of file formats. It's a LiveCD, which means that you can test it without installing and after this optionally install it - it has a nice easy graphical installer.
It's the first Slackware-based LiveCD distribution with GNOME by default. It includes NetworkManager and initng in place of sysvinit. It also features accessibility tools. It is also the first release with the innovative portable applications system. This allows you to download application from the site (modules section), place it where you like, and use it. It's just a single file, no directories. You can also use this application without installing it, directly from the internet. However, after this, the speed of the application is limited by the speed of your connection, of course. Check out the "Applications" section on the website.
Besides this, you can install software with the apt-get-like system "slapt-get" and it's graphical front-end: GSlapt. It also contains src2pkg and sbopkg in case you want to compile something from source or existing SlackBuild Depfinder is included to find dependencies of packages. Click here for a guide on how to use those. I also managed to put development tools in there, like GCC, G++, svn, cvs, so on... This is a release candidate, and despite that it's OK for using. It has a bit more things to do until the release (like language selection on the boot menu), but I decided that it's important to put it here for testing.
Lost my wireless keyboard and mouse upgrading slackware current.Boot seems to be normal.I just can't login, cause have no keyboard.
View 2 Replies View RelatedWe are pleased to present one of our new creations: pkgbuild, a tool written in standard C++, using libCURL, ZLib, BZip2 and libLZMA (part of XZ). It is a modern Slackware packages builder, network-transparent, multi-architecture, designed to greatly simplify the creation of a package, automatically executing the required post processing.
What does it do? Recognize and build packages for the following architectures: i386, i486, i586, i686, x86_64, IA64, IA32e, s390, s390x, sparc and sparc64.
[Code]...
how to on enable ling separate X sessions with dual monitors in slackware? In rhel all I have to do is enable it under the nvidia-settings... In slackware it does not work that well... to what I understand you have to configure a separate x session...
View 11 Replies View RelatedI'm trying to bring my Slackware system back to life as my XP HDD is dying... I've got everything working except for my audio. I got a new motherboard (ASRock P43DE3) and it has a VIA VT1708S as the onboard audio. Is there any way I can get this working without rebuilding the kernel?
View 5 Replies View RelatedI noticed that the official Slackware packages don't contain static libraries. The SlackBuild scripts from slackbuilds.org or from Slackware DVD usually contain --disable-static option to prevent building the .a file. And if configure script doesn't allow such option, the .a file is deleted before the package is created.I am wondering what is the reason for that? Is it just the matter of conserving disk space? Are there also other reasons?
View 11 Replies View RelatedI try to install Slackware to my IDE hard drive and boot first from Slackware DVD. After I loaded huge.s kernel, and tried to partition the hard drive using fdisk by entering "fdisk /dev/hda", I found out that the partition size is max to 3 Gigs instead of 80 Gigs.
I think the kernel is looking at my boot disk, which is around 3 Gigs. How can I make so that it looks at my IDE drive instead at my boot drive? Is there any manual that shows me how to install Linux from scratch this means I want to wipe out all my hard disk and install Slackware Linux there?
I recently bought the Alfa AWUS036h which uses the Realtek rtl8187 chipset. I am able to load the module and connect to any network, but its almost as soon as I try to load a page the connection drops. It never stays connected for more than 30 seconds. My other computers using the same adapter in the same spot work fine, unfortunately there not running slackware. I've tried compiling the newest stable kernel and checked the rd.inet1.conf settings.
View 6 Replies View Relatedslackware-current kernel 2.6.35.10-smp for instance if i just want to connect to wep ap. i done
[code]...
it says waiting for carrier and it just time out, im wondering why i read somwhere that its not working good with slackware 13.1
I have installed multilib support in my 64bit slackware 13.37 installation than I proceed it to install google earth from slackbuilds... and did ln -sf /lib/ld-linux.so.2 /lib/ld-lsb.so.3Now when I try to run google earth I get:[ 760.092745] googleearth-bin[3647]:segfault at 984f7d31 ip 00000000984f7d31 sp 00000000ffbfe100 error 4
View 14 Replies View RelatedI created this small how to install the binary Blender 2.49b on Slackware 13.1 86_x64 Multilib.
http://wiki.blender.org/index.php/Do..._Blender/Linux