Slackware :: Alfa AWUS036h Rtl8187 Adapter Not Working On Slackware 13.1
Oct 13, 2010
I recently bought the Alfa AWUS036h which uses the Realtek rtl8187 chipset. I am able to load the module and connect to any network, but its almost as soon as I try to load a page the connection drops. It never stays connected for more than 30 seconds. My other computers using the same adapter in the same spot work fine, unfortunately there not running slackware. I've tried compiling the newest stable kernel and checked the rd.inet1.conf settings.
View 6 Replies
ADVERTISEMENT
Feb 5, 2011
slackware-current kernel 2.6.35.10-smp for instance if i just want to connect to wep ap. i done
[code]...
it says waiting for carrier and it just time out, im wondering why i read somwhere that its not working good with slackware 13.1
View 9 Replies
View Related
Nov 3, 2010
Works fine in Windows 7 on this PC. It's a 2 week old Dell Studio 1749, with no after market software installed aside from Ubuntu (as a secondary OS). When I plug the USB adapter in, the computer locks up. Only while in Ubuntu though. Not sure what the deal is. Chipset is RealTek RTL8187. The adapter is new, fresh out of the box.
View 1 Replies
View Related
Dec 8, 2010
I work for a firm of solicitors as the IT guy and I have been asked to assess the security of our network. I have recently bought an ALFA AWUS036H USB wireless adapter to help test the wireless networks. We have a few old devices that only run WEP, which I know from the start is bad. I'm trying to use the adapter with aircack. I issue the command:
[code]...
Now I set the adapter to channel 11 using airmon but running iwlist mon0 channel says the adapter is not running on any channel at all. Has anyone else experienced simular issues, and if so how was this resolved?
View 2 Replies
View Related
May 29, 2010
This is wireless adapter: [URL]... USB/Detail.bok I have 2 AWUS036H Wireless USB adapter that uses the RTL8187 Chipset connected to a USB 2.0 Port. It is very slow when I try to go to websites or download anything using Ubuntu 10.04 Lucid Lynx. The max speed I can get out of it is 135 Kilobytes per second when downloading anything. But when I am on Windows I can max out 2.6 Megabytes per second. I have been trying to find a solution but have found none. When I look at the light on the wireless adapter and compare it to what it looks like on both Ubuntu and Windows. It seems that the wireless adapter light is dimmer on Ubuntu. So I was thinking it was txpower set very low. I changed it but no success on changing speed. I am using WPA2-PSK which obviously uses AES. I have also tested it while it is in WEP and when it is Open with no change in speed. Speed results Ubuntu 10.04: Speed results Windows 7: I changed the settings to Megabytes on those speed results.
[code]...
View 3 Replies
View Related
Sep 13, 2010
I have Ubuntu 10.04 (32 bits) and a wireless usb adaptor Alfa Network AWUS036H with Chipset Realtek 8187L. After a few minutes connected, the adaptor disconnects and I can't reconnect again. I search this forum but I'm not sure about what to do. Do I need to get and install another driver? I need to use the windows driver?
View 5 Replies
View Related
Feb 12, 2010
I have Ubuntu 9.10 and I am trying to get my ALFA network adapter to work. It shows a few wireless locations including my brother who lives beside me. He is going to let me use his internet on my laptop. His connection is opened and I can connect to it fine... but no sites load... I've tried about 4 other open networks that I picked up and the same thing... it sometimes loads the first page but then thats it... This is suppose to be the best network adapter on the market for under $100. I have a 5dBi ant and a 2.4ghz 6dBi ant.
Oh yea, I've tired this on two other ubuntu 9.10 desktops and 1 laptop and get the same thing... I am however able to connect to my wireless router and browser the internet... but I will not have internet much longer
View 1 Replies
View Related
Jan 5, 2010
i have ALFA AWUS036H 500mw wireless card which uses RTL8187L chipset. Ubuntu 9.04 and 9.10 come with preloaded rtl8187 driver but they DO NOT work for internet surfing. However they do work with aircrack suit for injecting etc. Specific problem is: They only work with really close ranged AP, anything far and you will have random disconnects or inability to connect. So basically its unstable compared to patched driver.
To get this alfa card working for internet access, the only way currently is to use any LInux distro with Kernel 2.6.30 and lower. Starting from Kernel 2.6.31 they have made some changes to net api structure which wont let you patch the driver with the patch available at aircrack website which is normally used to make this driver suitable for internet browsing. Refer to this thread for more info: [URL]... I am currently using backtrack 4 pre final but i was going to install kubuntu 9.04 till i recieved an email from realtek with a new driver that compiles in kernel 2.6.31. I tested it on Kubuntu 9.10 and it compiled fine but i could not make it run. Under NetworkManagement for Kubutnu, the problem is that it keeps asking for WEP key and gives me the message 'wlan4 failed to connect' instantly after i enter the key, so its possible that its not compatible with NetworkManagement. I havent tried it with wicd yet, it may work........
View 5 Replies
View Related
Feb 4, 2011
I buy a new usb network adapter (Through DX), when I try to use it in ubuntu or BackTrack4 Final it is working, and connecting networks even with WPA encryption. But after few minuts it stops working totally. It is showing that I'm connected to the AP but web sites do not respond.
Notes:
- I have another PCI Wireless adapter which works fine.
- The problematic adapter works great on windows.
- A driver CD came with it, including a linux driver which I wasn't succesfully installed.
- A BackTrack3 Disc came with it, claming by the instructions that the adapter will work with it. I didn't try it because i have backtrack 4 final.
It took me dozens of surfing the web hours, and too many restarts,
View 2 Replies
View Related
Jun 21, 2010
I am using Ubuntu 10.04 64-bit and I purchased a new ALFA AWUS036H wireless card. I would like to know if this "1Watt" wireless card is configured for full power. iwlist wlan0 txpower results:
wlan0 unknown transmit-power information. Current Tx-Power=27 dBm (501 mW). It appears to me that I should be able to increase the power. "iwpriv wlan0 highpower 1" does not work. Do I need to patch the new default driver that comes with Ubuntu 10.04 64-bit with the aircrack one following these directions:[URL]...? Monitor mode and a injection tests seem to work fine with the driver I have installed.
View 2 Replies
View Related
Apr 19, 2011
I have Backtrack4 installed as a dual boot with Vista in my Acer Aspire 5315 laptop. I can connect to my access point with my inbuilt wireless Atheros AR5007EG wireless adapter by starting services/network and WICD. The problem I have is connecting my Alfa network RTL8187 wireless through WICD or wireless assistant. My Alfa network adapter works fine as I have used it with Aircrack-ng in BT4.
View 2 Replies
View Related
Jan 30, 2010
i tried following the readme file included in the driver of the usb network adapter but seems its not exact.
any ideas on how i can configure it manually? KDE does not detect any wifi device. .(of course since no driver is installed yet).
i used my desktop (win***)with DSL connection and installed the driver of the usb net adapter.. made it as the access point. . so my laptop detects the desktop as wifi spot.
View 2 Replies
View Related
Sep 8, 2010
I have a RTL81817 chipset in my USB wireless network adapter. I installed the driver, but it still didn't work.
In Yast->Hardware->Hardware Information->USB the following details are displayed:
RTL8187B_WLAN_Adapter
-Bus: USB
-Class(spec): unclassified device
-Class: unclassified device
-Device Identifier: 229767
[Code].....
View 1 Replies
View Related
Jun 23, 2011
I'm trying to bring my Slackware system back to life as my XP HDD is dying... I've got everything working except for my audio. I got a new motherboard (ASRock P43DE3) and it has a VIA VT1708S as the onboard audio. Is there any way I can get this working without rebuilding the kernel?
View 5 Replies
View Related
Mar 13, 2011
Has anyone managed to get the moonlight extension which enables one to watch Sky TV working in slackware? I have the extensions for firefox and chrome but all I get is a blank screen.
View 5 Replies
View Related
Feb 8, 2010
I need to install the drivers for wireless.... rtl8187 11g USB adapter... I have a opensuse 11.2
View 7 Replies
View Related
Aug 29, 2010
Ditching Windows for the last time but this seems to be a issue wireless seems fine for a bit but then the connection slows to around 20kbps or worse. Any ideas what it could be? Using 10.04.1 it says it has a 48mb connection and i have 4 bars.
Bus 001 Device 005: ID 0bda:8187 Realtek Semiconductor Corp. RTL8187 Wireless Adapter code...
View 9 Replies
View Related
Mar 3, 2010
My USB printer stopped working after I upgraded Slackware, using the Current.Also can not install any USB printer. CUPS version 1.4.2.
View 14 Replies
View Related
Nov 20, 2010
I am fairly new to this and I cannot get a watchport V2 webcam in working slackware 13.
It seems to be recognised;
Bus 003 Device 002: ID 1608:4001 Inside Out Networks
View 1 Replies
View Related
Feb 3, 2010
When I first turn it on to the desktop, it automatically connects and disconnects automatically 5 times then sometimes it would disconnect a few times randomly out of the blue.
This ia an external single usb wireless adapter you plug in the usb port on my desktop tower.
View 1 Replies
View Related
Oct 13, 2010
I am looking for advice and recommendations for USB Bluetooth Adapters. My primary use will be using a Wii controller/remote with XBMC (compiled with 'cwiid' support).Secondary use is general data transfer; other peripherals keyboard/mouse etc.But more than anything I would like to buy a product from a manufacturer who has open support for GNU/Linux and to stay away from others who don't (BlueSoleil software, WinBond - and others).
View 1 Replies
View Related
Oct 11, 2010
So I recently installed Slackware 13.1 and now want to get my D-Link DWA-140 to work with it. However I'm quite an amateur at Linux and can't seem to figure out how to. After following many different how-tos and tutorials this is where I am: I got 2010_0709_RT2870_Linux_STA_v2.4.0.1 (supposedly USB driver)package and rt2870.bin (supposedly firmware) in my root catalog. What I have already done with them:
make & make install in 2010_0709~
blacklisting modules 2x00usb, 2x00lib, 2800usb
modprobe rt2870sta
copying rt2870.bin to /lib/firmware
Regardless of everything, my adapter still is not active.. and how can I make the OS load the module at startup?
View 14 Replies
View Related
Jun 10, 2011
I recently moved out of state and don't have access to the net, however the neighbor of where I am staying is nice enough to let me leech off of her network till I get going. I know next to nothing about slackware and wireless networks since I have never had to mess with it. I have done my reading and have gotten this far.
1) wirelss card is installed and recognized, its a PCI b/g card that uses the ath5 module. The module is loaded and seems to be working.
2) I have heard wicd is easy so I installed it from /extra and it found my essid and accepted the wep password and it says connected at 45% and shows an IP.
however when I launch firefox or try to ping out nothing happens.
View 4 Replies
View Related
Jun 10, 2010
Strange, just fired up my laptop and Wicd is telling me that I am on a Wired Network. Somehow, I have no clue as to how but my wireless connection is now being interpreted as a wired one.
View 7 Replies
View Related
Apr 20, 2011
I want to use my C-Media USB Audio Adapter with Slackware 13.1
When I connect the device it is shown in lsudb:
Bus 003 Device 002: ID 0d8c:c C-Media Electronics, Inc. Audio Adapter
Do i need to have the snd_usb_audio kernel module. However when is call modprobe snd_usb_audio I get: Fata: Module snd_usb_audio not found.
I though that snd_usb_audio was not build with the kernel, so I did:
Without making any modifications the .config the file already has CONFIG_SND_USB_AUDIO=m . Does this mean that the current kernel has that module? If so why I cannot load it?
View 1 Replies
View Related
Jun 17, 2011
So I bought a new wireless pci-e adapter today that has a realtek 8192CE chipset. I checked before I bought it and it is supported in the kernel since 2.6.38. Just to be safe I used the kernel-huge-2.6.39-rc4 config file from testing just to get it to work. All the kernel modules are loaded correctly and it is recognized by iwconfig, however wicd acts as if there is no wireless card in the system. I checked dmesg and saw this error.
rtl8192cu:loading firmware file rtlwifi/rtl8192cfw.bin
rtl8192cu:firmware loading failed
So I googled around and didn't find much except for somethings about needing firmware. I did make firmware_install but for some reason there is no rtlwifi/rtl8192cfw.bin file. As a test I found an RPM that had the bin file I needed. I converted it to a tgz and ran explodepkg on it to extract the one file I needed. I made a directory /lib/firmware/rtlwifi and dropped the .bin file in and wicd immediately found my networks. So I guess it is a missing firmware issue, however I am currently not able to obtain and ip address. Why did the kernel not build the firmware I need, or is that something I have to download and build separately?
View 3 Replies
View Related
Sep 7, 2010
Anyone know of a good usb wireless adapter that works out of the box with slack 13.1?
View 9 Replies
View Related
May 25, 2010
I have just completed installing Ubuntu 10.04 LTS. When I click on teh network manager it shows:
Wired Network
disconnected
Wireless Network (Intel PRO/Wireless 2200BG [Calexico2])
wireless is disabled
Wireless Network (Manufacturer RealTek RTL8187 RTL8187 Wireless)
[Code]....
I want to be able to connect through the RealTek wireless adapted.
View 3 Replies
View Related
Jan 5, 2010
I'm using Slackware 13 on my laptop, but when I remove the AC power adapter and try to boot slackware my X server doesnt start. I had the same problem with Slackware 12, but I fixed it with adding a line in xorg.conf. Something like this:
Option "PowerAdaptor...." Now I dont remember the exact line... I'm not so sure about this line in xorg.conf.
View 2 Replies
View Related
Jun 5, 2011
Im running Ubuntu 11.04 with alfa awus036nh. I first tried to install drivers from alfa disc for RT3070. Everything seemed to be working but i got the imfamous mon0 channel -1 problem with aireplay-ng. Did some research-downloaded and tried different drivers rt2800 rtl 8170. Bottom line is i dont know what THE F*** im doing. I think i installed three different drivers. Now airodump doesnt show any output. Im going crazy. Is linux designed to make ppl go crazy. Windows is calling me to go back to it. THings shouldnt be this complicated. BTW im on a asus laptop with atheros ar 9285 card in it. a breif explanation of how drivers work in linux . Once again maybe im just putting the cart b4 the horse as im only about 2 weeks fresh into ubuntu.
View 1 Replies
View Related
