we have installed the Centos on my server and configured the postfix with our domain [URL] as example. If I send any email through squirrel email, Emails are going from [URL] instead of [URL].
View 8 RepliesIf i want to add new MX in my domain name then what to do in new mx server. Suppose my existing mail server is test.com whose mx record is below
test.com. 14400 IN MX 0 mail.test.com.
test.com. 14400 IN MX 5 mx-01.test23.net.
So, what need to change in test23.net server.
I'm setting up a PDC Samba server on centos5.4. All tasks are well done but on adding new machine in my domain I have a this error message: Error occurred when attempt to join your machine in domain "invalid user name".
samba.log
Code:
[2010/07/05 12:34:55, 2] smbd/sesssetup.c:setup_new_vc_session(1212)
setup_new_vc_session: New VC == 0, if NT4.x compatible we would close all old resources.
[2010/07/05 12:34:55, 2] smbd/sesssetup.c:setup_new_vc_session(1212)
setup_new_vc_session: New VC == 0, if NT4.x compatible we would close all old resources.
[2010/07/05 12:34:55, 2] auth/auth.c:check_ntlm_password(309)
check_ntlm_password: authentication for user [root] -> [root] -> [root] succeeded
[2010/07/05 12:34:55, 2] rpc_server/srv_samr_nt.c:_samr_lookup_domain(2919)
Returning domain sid for domain RAPHAELLO -> S-1-5-21-3852106609-489253481-401883016
smb.conf .....
I think that the machine account is missed or miss matched.
When i try to join my Ubuntu server to Microsoft Active Directory domain, i get the error message below.
Kinit failed: Clock skew too great Failed to join domain: Time difference at domain controller I know the reason is because of the time difference between my domain controller and the Ubuntu server. But what i want to know is that possible to join a domain without time synchronisation? Because my domain controller is working for another time zone, for another Country, so i can not synchronise it with my Ubuntu server.
I install qmail server from source according to document on qmailrocks.org but when i add domain and email account and after press the button create the next window in explorer is blank.
View 1 Replies View RelatedI have a linux test machine which I would like to run a copy of a production webserver. This is a legacy application which does not use a property file for its server name. Throughout the application, the server name is hardcoded (example: open connection to myServer.myCompany.com).
Is there any linux trick which I can use to redirect all requests for a certain host back to localhost? I know in Windows that I can add an entry to the hosts file and have it redirect back to localhost. How do I do this in linux?
I'm using slackware 13.0, 32-bit with sendmail, fetchmail, procmail and mutt.This is a recent install of slack, for several years, I have used a similar configuration on ubuntu, but with postfix as the MTA instead of sendmail.My system has one user: tim. Email sent to me at any of my email addresses that have 'tim' has the host component, are received, but along with that delivery is the delivery of an error message. Below is a copy of such a delivery.
View 5 Replies View RelatedI am looking how to fix a problem like is in the subject. I searched internet and lots of people wrote that to fix this problem need to add a line in /etc/hosts file:127.0.0.1 localhostMoreover i added later also line:127.0.0.1 localhost.localdomain localhostbut it didn't help.
View 1 Replies View RelatedI've got a home server running Ubuntu Server 9.04 and several machines running Ubuntu Desktop (9.04 and 8.04) and Windows (XP, Vista and 7). Now what I want to do is to create a domain and directory server similar in function to Windows Server w/ AD and join my other machines to the domain, but am not sure where to start. I already have file shares with Samba but now I want to setup a domain.
View 3 Replies View RelatedI want to make BIND9 aware of my TLD so I need to give it an A record. Then I wanted to create CNAME for ftp, mail and so on as time permits
I have webmin so I need to work from that.
my TLD is [URL]
I wanted to bolt on www, ftp for now
www is port 80, ftp port 21 etc
I have server 9.04 and joined thru winbind to Windows Domain and subversion installed.Windows AD users can use their own credentials to join and everything is working fine.However the group svn which is used to access the repos in /etc/groups has some users.However I would like to add the domain users group to the svn group but the domain users contains Space. And /etc/groups does not happend to read the space any ideas on how to add "domain users" to the svn group in /etc/groups
View 1 Replies View Relatediam using centos5.2.configured qmail,vpopmail. while adding domain form vadddomain<domain.co.in> At first time domain folder get created in domains directory.and also postmaster user also get created by default.And also in mysql. Now the problem is after some times or rebooting system domain get erased automatic.also in /var/qmail/users/assign file domain name get erased.
View 1 Replies View Relatedi had created domain but not getting domain in /var/qmail/user/assign file.also it error /home/vpopmail/bin/vdominfo abc.co.inInvalid domain name
View 2 Replies View RelatedI have a SUSE 10 SP 2 server that needs to get added to a Windows Active Directory domain and registered in DNS. Samba is 3.0.28-0.5. I tried to join the domain with the following command:
[Code]...
I want to host 5 websites on my new virtual server so I have created 2 nameservers that point to my virtual server's IP addresses as a glue record. What confuses me is when I create a new domain on my server it gives the new domain it's own nameservers (ns1.thenewdomain.co.uk etc) do I need to change these records so they use the nameservers I created earlier? If I do? Which particular records should I change? I'm running a Unix virtual server with a Plesk control panel.
View 2 Replies View Relatedi need to allow window domain controller user to use file share of linux.windows DC user can see the share file and directories of linux file server but not able to access.
below is brief--
I have a Linux machine which is on my network but not on my domain. I have configured SAMBA FILESERVER for file sharing purpose. I have a Windows XP PC which is on the domain(windows server) that I am trying to connect to a share on the Linux box. I supply my credentials but regardless of which login I use I always get Logon Failure. I have created an account on the Linux machine with the same user name and password as my domain account but so far no luck. Can I connect from a domain PC to a non-domain Linux box? Is there something else I should be checking?
I'm working for a smallish non-profit that has gone through some recent growing pains. We have two sites that are currently without a domain controller, and no money for MS licenses, so I was thinking of trying to add a couple of additional Linux machines (we already run Linux for web services internally, and I've set up a test case previously to see if I could get a server to join the domain, which was a success) and was trying to find out if I can get them to act as Domain Controllers without replacing the domain. The main issue that I'm having at those locations is drive mappings are not happening correctly against our DFS file servers. The one other location that had this issue had it go away when we added a local DC. The domain is a Server 2008 domain.
View 2 Replies View Relatedi need to configure Redhat Linux as Domain Controller in my organisation, whee all of my clients PC's will be Windows XP or Windows 7 ( where i can login through Domain users ). what exactly i need to configure in Redhat Linux, i heard Configuring Samba as PDC is quite enough ? is that right ? then what is Open LDAP ? should i need to Configure Open LDAP also ?
View 2 Replies View RelatedThe company I work for, as usual, is Microsoft-centric. I'm attempting to integrate my Ubuntu server into the domain to allow domain users to authenticate to the server and access file shares using Samba. Here's my current configuration:
[Code].....
My customer has a domain hosted by me and he has another domain hosted by another isp. He would like to have this domain am hosted to be forwarded so thwt upon entering the url he should have the website which is hosted by this other ISP displayed (the url of the website be musked). How do i configure my DNS at achieve this?
View 1 Replies View RelatedI need to redirect a domain to a subtree of another subdomain , for example : [URL] should be redirected to [URL] How should I do this ?
View 1 Replies View RelatedI am thinking about buying a domain name and hosting my web server.
I have seen pricing from $8 to $30 a year. Any favorites from fellow ubunters? Also this whole "whois" thing scares me, if I am correct my information I enter when buying the domain is enter into some big pool of information. People can find this information out and dig up important information. url Can I prevent this with private Whois or how do I set it up? This website examples some of my fears with this whole WhoIs thing, url whois/Private-Whois.html Does most/all domain registers come with email or just email forwarding or both? How does that work? At this moment, my only question about Web Hosting is how do I get Website Statistics as in: Stats, web analytics, web traffic stats and more? I will be web hosting through Ubuntu 9.10 gnome.
In the office there is a local network with samba+openldap PDC. The local domain name is company.net. The company desided to create a corporate Website on a remote hosting and desided that the site's domain should be company.net which is same as local network's domain name. So now it is not possible to reach that corporate website from within the company's local network because, as I guess, bind9 which is installed on above menioned PDC looks for company.net on a local webserver. Is there a possibility to let people from this local network browse the remote site?
View 1 Replies View RelatedI have a need to set up the program TNG - The Next Generation of Genealogy Sitebuilding and run it on a local server (not on the Internet) for the purpose of learning the system prior to developing it on an actual website. I was told to use http://localhost on my browser (Mozilla Firefox). I get a message saying "That Works!", but it goes on to say that the contents of the web server have not yet been entered. The instructions for the downloaded files (which I unzipped) said to copy to the web root folder (the folder where the web server is located ?, I guess). But I don't know where it is or how to go about it. Can someone help? I already have MySQL and PHP, which are required to run this program, and I also have Apache installed on my Kubuntu 9.10 system.
View 1 Replies View RelatedI cannot seem to figure out where my system is pulling its localhost.localdomain setting from. OS is;
Quote:
[root@system root]# cat /etc/issue.net
Red Hat Enterprise Linux ES release 3 (Taroon Update 3)
Kernel on an m Network file is;
Quote:
[root@system root]# cat /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=localhost.localdomain
Quote:
[root@system root]# hostname
system
[root@system root]# hostname -d
[root@system root]# hostname -f
system
[root@system root]#
how to set the localhost and localdomain?
For the time being, the localhost is somehow being set correctly, but the localdomain is incorrect.
I have two machines running Ubuntu 9.1, both with Firefox 3.5 fitted, working well, apart from an error on one machine.When trying to download a Torrent I get the error "Firefox can't establish a connection at the server at localhost: 12322".The other machine is fine without this error.I have searched the Firefox files and this forum, plus a variety of sources but cannot find an answer, apart from "use the other machine".
View 4 Replies View RelatedRunning MYSQL 5.5.12 and MYSQL Workbench 1:5.2.34 on up-to-date Arch linux Set up MYSQL with root account and password. When running Workbench as user, got error when trying to connect :
Quote:
Cannot Connect to Database Server Your connection attempt failed for user 'root' from your host to server at 127.0.0.1:3306: Can't connect to MySQL server on '127.0.0.1' (111)
1 Check that mysql is running on server 127.0.0.1
2 Check that mysql is running on port 3306 (note: 3306 is the default, but this can be changed)
3 Check the root has rights to connect to 127.0.0.1 from your address (mysql rights define what clients can connect to the server and from which machines)
4 Make sure you are both providing a password if needed and using the correct password for 127.0.0.1 connecting from the host address you're connecting from
After commenting #skip-networking in my.cnf error changed to :
Quote:
Cannot Connect to Database Server Your connection attempt failed for user 'root' from your host to server at 127.0.0.1:3306: Lost connection to MySQL server at 'reading initial communication packet', system error: 0
1 Check that mysql is running on server 127.0.0.1
2 Check that mysql is running on port 3306 (note: 3306 is the default, but this can be changed)
3 Check the root has rights to connect to 127.0.0.1 from your address (mysql rights define what clients can connect to the server and from which machines)
4 Make sure you are both providing a password if needed and using the correct password for 127.0.0.1 connecting from the host address you're connecting from
Copying my.cnf to /etc/ and running Workbench as root didn't change anything, i still get the second error The wiki [URl] says to enable MYSQL in /etc/hosts.allow but i didn't do it, i guess it is required only when trying to access MYSQL from remote hosts which i dont.
I need to test an application on a Ubuntu Server that works as a database server for the network.
On this server's /etc/mysql/my.cnf, I have:
Code:
# Instead of skip-networking the default is now to listen only on
# localhost which is more compatible and is not less secure.
bind-address = <server-ip-address>
This means that I can't access the mysql server from 127.0.0.1, right?
I tried adding the following entry to /etc/hosts.allow :
Code:
mysqld : 127.0.0.1 : allow
I feel like I need to restart the service that reads /etc/hosts.allow, is this approach correct?
Or on /etc/mysql/my.cnf I can have two (or more) bind-addresses entries?
I've always used SSH to get to my Linux server and decided to figure out VNC. I've got VNC installed just fine and was logged, then I click Exit on the VNC screen and all hell broke loose. So I'm left with a gray useless screen, so I though I would kill the process. Did a ps -aux | grep vnc and saw what is running Then did a vncserver -kill :1 and vncserver -kill :2 Then typed vncserver
Now I'm getting Warning: blahblahblah:1 is taken because of /tmp/.X1-lock Remove this file if there is no X server blahblahblah:1 Warning: blahblahblah:2 is taken because of /tmp/.X2-lock Remove this file if there is no X server blahblahblah:2 So per the man pages I need to go here $HOME/.vnc and kill something. So How do I get to $HOME/.vnc? Is this a hidden location? I'm thinking I need to do a kill -9 .X1-lock per the above Warning message but where is that?
I have a laptop with Apache, MySQL, PHP, etc, and I'm able to work on web programming on my local server while at home, connected to my network. But I would like to be able to work on the local websites when I'm not connected to any networks, both for demonstrating a site, or simply working on it.
I was surprised to find that I could not connect to localhost at all without a network connection. I tried my normal Google for a solution, but, of course, that was futile without a network.
Now, I'm at home, and of course, it works because I have wireless. I don't really want to disconnect that to figure it out, so I thought maybe some nice soul here might know how to do this. Surely it can't be hard, can it? But, it's certainly not obvious.