I have two machines running Ubuntu 9.1, both with Firefox 3.5 fitted, working well, apart from an error on one machine.When trying to download a Torrent I get the error "Firefox can't establish a connection at the server at localhost: 12322".The other machine is fine without this error.I have searched the Firefox files and this forum, plus a variety of sources but cannot find an answer, apart from "use the other machine".
View 4 RepliesI've installed apache application server v7.I get a problem when I type the command localhost:8080
Unable to connect Firefox can't establish a connection to the server at localhost.
# ps ax |grep tomcat
9463 pts/2 S+ 0:00 grep tomcat
I installed required updates on my linux installation (ubuntu 9.4) I am now unable to access my localhost, and get the following message from my browser: Failed to Connect Firefox can't establish a connection to the server at localhost. Though the site seems valid, the browser was unable to establish a connection. I checked my hosts file which has the following information:
[Code]....
I'm having this strange behaviour. If i ssh -X remotehost, and then i issue firefox, the localhost firefox is activated.
View 3 Replies View RelatedAfter spending what seems like an eternity trying to learn how to host a couple of webpages on my laptop for no better reason than to practice creating them without paying for a server. .for the time being, I kept getting the usual errors (stuff I have seen lots of tutorials on) and this time kept getting
"The connection was refused when attempting to contact localhost"
Just by random chance I happened to open up Chromium for one of my attempts and low and behold, I get the much awaited
Quote:
It works! This is the default web page for this server.The web server software is running but no content has been added, yet. I can even login to phpMyAdmin from Chromium. So what's going on with Firefox? Doesn't work in Seamonkey either. Using 10.04
When I start firefox the first thing it does is asking a username and a password. Very strange. Other browsers do not do this authomatically, but they do if i type localhost in the adressbar. I'm using ubuntu10.04, and firefox 3.6.11. At the very beginning I thought that there was some problem with TOR, since the problem first appeared one day I turned it on (I had used it before, without having any problem). Now I've completely uninstalled TOR, but the problem is still there.
View 4 Replies View RelatedI've just moved on to 10.04 from 9.10. The program worked fine in 9.10. I *may* have overwritteen a conf file in the upgrade...
I now get the error as below:
My userdir.conf is like this:
<IfModule mod_userdir.c>
UserDir public_html
UserDir disabled root
<Directory /home/*/public_html>
[Code]....
and I have the PHP5 module installed. I vaguely recall that I may have had PHP4 installed - would the upgrade have removed it? Is there anywhere I can get it from to try? Anything else to do?
I recently installed ubuntu 10.04 and every time I open Firefox it comes up with: A username and password are being requested by url. The site says: "administrator"
I tried my login password and my ubuntu-one password and they didn't work. If anyone might know what the password could be then can you please reply.
I have a need to set up the program TNG - The Next Generation of Genealogy Sitebuilding and run it on a local server (not on the Internet) for the purpose of learning the system prior to developing it on an actual website. I was told to use http://localhost on my browser (Mozilla Firefox). I get a message saying "That Works!", but it goes on to say that the contents of the web server have not yet been entered. The instructions for the downloaded files (which I unzipped) said to copy to the web root folder (the folder where the web server is located ?, I guess). But I don't know where it is or how to go about it. Can someone help? I already have MySQL and PHP, which are required to run this program, and I also have Apache installed on my Kubuntu 9.10 system.
View 1 Replies View RelatedI have a laptop with Apache, MySQL, PHP, etc, and I'm able to work on web programming on my local server while at home, connected to my network. But I would like to be able to work on the local websites when I'm not connected to any networks, both for demonstrating a site, or simply working on it.
I was surprised to find that I could not connect to localhost at all without a network connection. I tried my normal Google for a solution, but, of course, that was futile without a network.
Now, I'm at home, and of course, it works because I have wireless. I don't really want to disconnect that to figure it out, so I thought maybe some nice soul here might know how to do this. Surely it can't be hard, can it? But, it's certainly not obvious.
I cannot seem to figure out where my system is pulling its localhost.localdomain setting from. OS is;
Quote:
[root@system root]# cat /etc/issue.net
Red Hat Enterprise Linux ES release 3 (Taroon Update 3)
Kernel on an m Network file is;
Quote:
[root@system root]# cat /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=localhost.localdomain
Quote:
[root@system root]# hostname
system
[root@system root]# hostname -d
[root@system root]# hostname -f
system
[root@system root]#
how to set the localhost and localdomain?
For the time being, the localhost is somehow being set correctly, but the localdomain is incorrect.
Am having trouble setting up a localhost DaviCal server. I've followed the directions here: [url]
And everything seems to be working, but when I go to: [url]
I get the "Not Found" page. How do I tweak this to use it locally from my computer? Have searched and tried to follow various tutorials, but no luck.
What I'm trying to do is setup a CalDav server locally on my computer so I can interface Thunderbird with it. The reason being then I can sync my Android phone with the CalDav server on my computer, thus syncing my Thunderbird calendar with it. Android is great, but currently the only ways to sync your calendar is to go through google's servers (not interested) or use the new CalDav sync software from the market... which is what I'm trying to do.
I'm going to be going off to college in the fall and the internet probably won't be blazing fast like it is at home, so I was wanting to set my desktop up so that it would act as a local cache of the parts of the internet i frequent the most, but I can't find anything like that. All the tutorials I've found are either for sharing the load on a server or for setting up a separate machine as the squid.
View 3 Replies View RelatedRunning MYSQL 5.5.12 and MYSQL Workbench 1:5.2.34 on up-to-date Arch linux Set up MYSQL with root account and password. When running Workbench as user, got error when trying to connect :
Quote:
Cannot Connect to Database Server Your connection attempt failed for user 'root' from your host to server at 127.0.0.1:3306: Can't connect to MySQL server on '127.0.0.1' (111)
1 Check that mysql is running on server 127.0.0.1
2 Check that mysql is running on port 3306 (note: 3306 is the default, but this can be changed)
3 Check the root has rights to connect to 127.0.0.1 from your address (mysql rights define what clients can connect to the server and from which machines)
4 Make sure you are both providing a password if needed and using the correct password for 127.0.0.1 connecting from the host address you're connecting from
After commenting #skip-networking in my.cnf error changed to :
Quote:
Cannot Connect to Database Server Your connection attempt failed for user 'root' from your host to server at 127.0.0.1:3306: Lost connection to MySQL server at 'reading initial communication packet', system error: 0
1 Check that mysql is running on server 127.0.0.1
2 Check that mysql is running on port 3306 (note: 3306 is the default, but this can be changed)
3 Check the root has rights to connect to 127.0.0.1 from your address (mysql rights define what clients can connect to the server and from which machines)
4 Make sure you are both providing a password if needed and using the correct password for 127.0.0.1 connecting from the host address you're connecting from
Copying my.cnf to /etc/ and running Workbench as root didn't change anything, i still get the second error The wiki [URl] says to enable MYSQL in /etc/hosts.allow but i didn't do it, i guess it is required only when trying to access MYSQL from remote hosts which i dont.
I need to test an application on a Ubuntu Server that works as a database server for the network.
On this server's /etc/mysql/my.cnf, I have:
Code:
# Instead of skip-networking the default is now to listen only on
# localhost which is more compatible and is not less secure.
bind-address = <server-ip-address>
This means that I can't access the mysql server from 127.0.0.1, right?
I tried adding the following entry to /etc/hosts.allow :
Code:
mysqld : 127.0.0.1 : allow
I feel like I need to restart the service that reads /etc/hosts.allow, is this approach correct?
Or on /etc/mysql/my.cnf I can have two (or more) bind-addresses entries?
we have installed the Centos on my server and configured the postfix with our domain [URL] as example. If I send any email through squirrel email, Emails are going from [URL] instead of [URL].
View 8 Replies View RelatedI have Ubuntu 10.10 and i installed the lamp-server by typing:
Code:
sudo apt-get install lamp-server^
everything seemed to work fine.
[code]....
I've always used SSH to get to my Linux server and decided to figure out VNC. I've got VNC installed just fine and was logged, then I click Exit on the VNC screen and all hell broke loose. So I'm left with a gray useless screen, so I though I would kill the process. Did a ps -aux | grep vnc and saw what is running Then did a vncserver -kill :1 and vncserver -kill :2 Then typed vncserver
Now I'm getting Warning: blahblahblah:1 is taken because of /tmp/.X1-lock Remove this file if there is no X server blahblahblah:1 Warning: blahblahblah:2 is taken because of /tmp/.X2-lock Remove this file if there is no X server blahblahblah:2 So per the man pages I need to go here $HOME/.vnc and kill something. So How do I get to $HOME/.vnc? Is this a hidden location? I'm thinking I need to do a kill -9 .X1-lock per the above Warning message but where is that?
I have an intel i7 with windows7 64b , then install VMware Workstation and create a machine with Oracle enterprise Linux 64b 5update4, now i want to inatall oracle db10gR2, but this message apears. [oracle@localhost database]$ Exception in thread "main" java.lang.InternalError: Can't connect to X11 window server using 'localhost:0.0' as the value of the DISPLAY variable.
at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
at sun.awt.X11GraphicsEnvironment.<clinit>(Unknown Source)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
[Code]...
I have Apache2 running on my server and can serve up pages on that box, but cannot seem to access them from other PCs on the network.
View 1 Replies View RelatedI have my bind9 DNS server running on Ubuntu with logging on. What's bothering me is that I have log full of localhost queries instead of from IP of the computer which actually asked.DNS queries log:/var/log/named.queries.log
Code:
24-Feb-2011 16:01:19.413 client 127.0.0.1#38022: query: clients4.google.com IN A + (127.0.0.1)
[code]....
I have an Apache 2 server setup in Ubuntu 10.04 LTS on my lab computer. The server listens on port 80, by default. I also have another process listening on port 4000 - this is a special server that executes some Matlab and other application scripts. However, due to university policy (or some licensing/faculty regulation - not really sure), this port 4000 has been set as one that listens only to the localhost. Now, we need to allow a few of the scripts to be run by people remotely.
We tried to setup a web interface - they enter a few values into a HTML form and submit. This form has action="URl... (basically, we were hoping the external form turns data over to the internal form), thereby keeping everyone happy. However, it turns out that this didn't work - the server on port 4000 realizes that the request isn't internal.
What would be the best way of handling it? While we did consider port forwarding, we didn't want everything to be accessible from the internet - i.e. we wanted a tightly controlled interface when accessed from outside, but if someone writes a program on localhost, we want everything to go through as normal (i.e. the current setup). Is there a way to do this without duplication (i.e. setup a new port 5000, that has only the components we want the external users to access)?
We've had this server running before but two hours ago there are some domains outside which we cannot send email to. this is a sample of the message we get
Quote:
The original message was received at Fri, 22 Jan 2010 14:31:59 +0800 from [10.0.200.10]
----- The following addresses had permanent fatal errors -----
<beth@nippon-antennaphil.com> (reason: 550 localhost.localdomain does not exist)
----- Transcript of session follows -----
... while talking to nippon-antennaphil.com.:
>>> DATA
<<< 550 localhost.localdomain does not exist
550 5.1.1 <beth@nippon-antennaphil.com>... User unknown
451 4.4.1 reply: read error from nippon-antennaphil.com.
Our server's been running smoothly before but i dunno what happened. I can send mails to gmail and yahoo as well... but there are like 3 domains which we cannot send mails to.
iam not able to connect localhost in mysql.i uswd command for mysql is
#mysqladmin -u root -h localhost password "123456"
ErroR:-
mysqladmin: connect to server at 'localhost' failed
error: 'Access denied for user 'root'@'localhost' (using password: NO)'
I am trying to configure local https server but I get this message: "ssl_error_handshake_failure_alert"
I configured my apache and make cert and key files from this article, following section 1B: [url]
I try to add server.crt and ca.crt files in firefox, but it didn't help. I googled and didn't find any information. I try also with 1024bit key.
I used 4 host to establish a high-availability web server system. 2 Load Balancer + 2 Web Server(installed MySQL Server 5.5). 2 MySQL Server used Multi-Master Replication.Used "Amoeba" as MySQL Proxy which direct the write statement to a specific MySQL Server.I can login Amoeba and MySQL Server using MySQL client. I tried query something in XAMMP on Windows XP. It work!
Installed related software:
MySQL-server-5.5.11-1.rhel5
MySQL-shared-compat-5.5.11-1.rhel5
php53-mysql-5.3.3-1.el5_6.1
MySQL-client-5.5.11-1.rhel5
[code]....
What I tried:
yum install php php-mysql
yum install php53 php53-mysql
Compiled php 5.3.6 soruce + MySQL 5.5 Server, Client, Shared, Shared-Compact Above software installed on different host. And the phpinfo showing MySQL I doubt something wrong in my php.ini. Used default php configuration.
php can't connect mysql by 'localhost' but can connect by IP address:
[Code]...
We installed CentOS 5 at our school and are attempting to get 2 simple DNS servers online. These are simple name resolution servers for our network. We installed the needed caching nameserver packages via Yum and all seems to be well, but for some reason when the server is online, it fails to resolve DNS records except when we direct the requests to its 127.0.0.1 (localhost) interface. As for the server specs, the DNS server is running on a Virtual Machine, and the ESXi server has 2 quad-core Xeon CPU's with 48 Gigs of RAM (in short.. hardware is adequate.)
Here's more details:
When the box boots up, we can confirm that the named service is running and it resolves DNS records when we direct queries to its localhost address:
[root@ns1 ~]# dig hotbot.com @localhost
; <<>> DiG 9.3.6-P1-RedHat-9.3.6-4.P1.el5_4.2 <<>> hotbot.com @localhost
;; global options: printcmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 55510
;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 4, ADDITIONAL: 0 .....
; <<>> DiG 9.3.6-P1-RedHat-9.3.6-4.P1.el5_4.2 <<>> hotbot.com @66.186.176.2
;; global options: printcmd
;; connection timed out; no servers could be reached
What would cause the Named service to not answer DNS queries from the physical IP but only from it's internal IP?
the custom-yum.sh script (or, whatever you say ) below:
#!/bin/bash
## Mounting CD/DVD ##
echo "Mounting CD/DVD in /media"
mount /dev/hdc /media
[Code].....
Could someone check this for me? I tried to send mail to localhost (ubuntu server) but when i tried to view it in log file, it gave me this:
Code:
xanios@ubuntu:~$ tail -f /var/log/mail
tail: cannot open `/var/log/mail' for reading: No such file or directory
tail: no files remaining
in my /etc/postfix/main.cf:
Code:
myhostname = ubuntu
alias_maps = hash:/etc/aliases
[Code]...