My ftp server runs vsftp. The ftp passive ports stopped working while iptables is running, so users can't ls their dirs. I know that you need to load the modules of ip_conntrack and ip_conntrack_ftp, the problem is when I modprobe ip_conntrack I get the error: FATAL: Module ip_conntract_ftp not found. No that is not a typo. ip_conntract_ftp? Am I missing something?
View 2 RepliesI've just installed the vsftpd service on ubuntu 9.10.
in /etc/vsftpd.conf
local_enable=YES
write_enable=YES
and I have restarted the vsftpd with "sudo /etc/init.d/vsftpd restart". I could login with a username but couldn't display any file. Got the following error
I recently installed vsftpd on my system and it was running fine for my system users. Now I wanted to add virtual users so I googled it, I found this tutorial: [URL]
I did what they've been saying over there but when I restarted the vsftpd I couldn't login with the virtual user and also not with the system user anymore. This is the error ( with the system user who could login before ):
Code:
Status:Verbinden met 109.230.234.21:21...
Status:Verbinding aangemaakt, welkomstbericht afwachten...
Antwoord:220 (vsFTPd 2.2.2)
[Code]...
I installed Ubuntu 10.04 64bit server on DELL R710 server recently.
The basic:
[System Model] --- PowerEdge R710
[Ubuntu] ---
root@pek-mcbuild2:~# cat /proc/version
Linux version 2.6.32-21-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:09:38 UTC 2010
root@pek-mcbuild2:~# uname -ar
[Code]...
I have an FTP server which is linked to a user account in a chroot jail and I have disabled anonymous access (anonymous_enable=NO). I can FTP into this server from Windows command line FTP client and every other FTP client I have used with no problems.
However, I have been trying to access it via a web browser (firefox) using ftp://<server name>. This connects and prompts me for my login details, which I enter as I should. But then I get a 425 connection error.
In my /var/log/secure log, I see the entry: -
Why is Mozilla Firefox trying to connect as an anonymous user when it has already prompted me for my login details?
Any clue? I'm using the same key for root login and it works fine (also works fine for SFTP but i hate using that cause its extremely slow)
View 2 Replies View RelatedServer Apache doesn't work.Note the LOG line,you cannot modify or delete "logs/"
View 1 Replies View Relatedsmall office network with Linux CentOS 5.4 internet server. I use Squid 2.6.STABLE21. I have static IP.If I masquerade my small office net FTP works, but if I disable masquerade then FTP doesn't work through Squid.I was trying to stop iptables but the problem was the same.
View 9 Replies View RelatedI have a simple cron job that runs every night & I tested this manually by just running the command as root in bash and all worked fine. It took some time but the crob job finished and I got my results emailed to me perfect / as expected.
Here is root's cron job listing:
Code:
Now I noticed that I never ever got anything emailed to me the following day so I am wondering if perhaps the Cron daemon doesn't have permissions or has an issue running / executing the command rather than when I test the command as 'root'? When I view my logs, I can see the command being executed and don't see any errors however I don't get email results when Cron runs the job rather than me taking the command and running it manually in Bash...then it works. What am I missing?
Code:
host - ubunut 1010 desktop 64bit
virtualizer - VirtualBox ver 3.2.10 r66523
guest (VM) - ubuntu 1010 server 64bit
[code]....
I am building a new server on Rackspace Cloud. When they create an instance, it is a raw install. I have several other instances running Ubuntu 10.04 with vsftpd running just fine.But I have an app that doesn't like php 5.3 so I created a new server instance with Ubuntu 9.1 and php 5.2.Here is my problem... I install vsftpd EXACTLY the same way I've installed it dozens of times on Ubuntu 10.04. But when I try to access it, I get an ERROR 500 "vsftpd: cannot locate user specified in 'ftp_username':ftp. I'm SURE I'm using a valid username & password.
View 1 Replies View RelatedI am trying to install some packages in a ubuntu 8.10 server, however, apt-get doesn't work (I get several 'not found' errors). Is there any way to do that? I know this version is probably not supported anymore but I can't just format a customer server because it's OS is outdated...I just can't put my sources.list on it because I am on ubuntu 10.10 and it would download updates for the wrong OS probably causing a huge damage on the old one.
View 9 Replies View RelatedHave done a fresh install of 11.04 32bit and after getting everything to work I have run into a 11.04 killer for me. PS3 Media Server don't work It doesn't detect the PS3 correctly and on the PS3 side it just keeps saying "data corrupted" for every video I try to play. It used to work perfectly on 10.04.
View 3 Replies View RelatedI have a computer that I would like to backup the home directory onto a server. I created a script called wien_backup.sh that contains the following:
#!/bin/bash -l
/usr/bin/rsync -rv --delete-after --ignore-errors -e /usr/bin/ssh root@wngr403-unix2:/home/ /space/systemimager/Wien/
where wngr403-unix2 is the computer I am backing up, and the script is ran from the server. If I run the script by itself, it works just fine. If I run it as a cronjob, the /var/log/syslog says it ran, but it does nothing.
postfix
Code:
# See /usr/share/postfix/main.cf.dist for a commented, more complete version
# Debian specific: Specifying a file name will cause the first
# line of that file to be used as the name. The Debian default
# is /etc/mailname.
[Code].....
Followed [URL] ubuntu 11.04 server
I used fedora12 builded mail server uning sendmail and dovecot at my home, when I at home everything are works fine, no matter I sent email to hotmail, or hotmail sent to my mail server, but I got the problem that I can't access my home server when I at office, the error messages as below:
#telnet xxx.xxx.xxx.xxx 110
-ERR Cannot connect to POP server xxx.xxx.xxx.xxx (xxx.xxx.xxx.xxx:110), connect error 10061
#telnet xxx.xxx.xxx.xxx 25
[code]....
P.S there is no firewall between the my office and home
I have a server that has snmp installed(Version is net-snmp-5.3.2.2-9.el5_5.1). This server has 5 n/w interfaces with diferent ip's. My problem is when i try snmpwalk on to the main interface, in my case "bond0" with the assigned ip address there is no response.
eg: snmpwalk v2c -c nature 172.17.241.190
No Response from 172.17.241.190
But when i run the same query with "localhost" snmpd responds.
eg: snmpwalk v2c -c nature localhost
[Code].....
I want to snmpwalk in to the "172.17.241.190".
I have a dedicated server running CentOS 5, Plesk 9.2.2, SMTP Postfix and Courier-IMAP.The issue I have is that on all domains on the server receiving email works fine however sending email never seems to work. This is from email programs, my phone, webmail and PHP. None of them seem to be able to send email. If it is of worth Spam Assassin is running however I don't feel it is causing any problems.
View 7 Replies View RelatedMy mother runs Ubuntu 10.04 on her home computer, but on her workplace they use some version of Windows. Her IT-guy sent her a .rdp-file for logging in to her workplace server. This file doesn't work in Ubuntu, and the IT-department at her job can't solve the problem. Ergo; She's unable to log on to her workplace computer/server from home.
View 3 Replies View RelatedAfter I finished upgrading Xubuntu from 9.10 to 10.04, I discovered that my keyboard stopped working in X Server. The upgrade process was running smoothly until the last moment, when it produced some error, which I, unfortunately, did not write down. Anyway, the upgrade has completed; uname shows kernel version 2.6.32-31. Now the keyboard works fine if I select a recovery mode at startup, but if I type 'start gdm' from the shell or select the default option in GRUB while booting, the keyboard becomes unavailable right from the login screen. I can log on using the virtual keyboard, but that's all I can do; the keyboard is still dead.
View 5 Replies View RelatedI can see that in yum-updatesd configuration i can use smtp_server to rely mail notifications as per below outputs from man pages smtp_server SMTP server to use when sending mail, host or a hostort string. Defaults to localhost:25. The problem that this option doesn't work at all and it rely into the local MTA not the one set on the smtp_server
View 2 Replies View RelatedSo here is what I'm trying to do: I want to share a folder and have it so that guests can access it, but only read. I also want to make it possible that I can mount it as a network drive on my Windows 7 machine and login with my linux account so that I can have write access. This is from a completely stock Ubuntu 8.10 and Samba config. Everytime I've tried I've failed to get it working.
View 1 Replies View Relateddoes anyone know how can I use locate with rm? rm `locate "some file"` does not work when my pathnames occasionally contain:
-spaces and other characters (like + or possibly others that need escaping)
-greek characters
how can I grab line-by-line the output from locate and wrap quotes"" around the paths?
Trying to migrate our news server to a new instance on centos5 and having issues with the makehistory utility. It errors out and then just creates all null values for the overview database. Here is the output:
[root@server overview]# /usr/lib/news/bin/makehistory -O -x -F
*** glibc detected *** /usr/lib/news/bin/makehistory: free(): invalid pointer: 0x000000000063ce60 ***
======= Backtrace: =========
[Code].....
when i am enabling mysql in server (port 3306) it does'nt work. but when i execute iptables -F it works what may be the reson?
View 6 Replies View RelatedI am trying to setup forward mails to a user in my linux server to procmail. But that doesn't work. My $HOME/.forward looks like the following
[Code]....
I've been having this problem since 10.6 released, but have until now been successful with the "just use Thunderbird" response. My sendmail server hasn't been changed, but as clients upgrade from OSX 10.5 to 10.6 suddenly mail.app will no longer connects to send SMTP messages through the server. (IMAP connections to the same server using the same user/pass combinations work perfectly) When I look at the logs, things basically stop right after the STARTTLS command.
Google indicates alot of people are having similar problems, but I'm not seeing any solutions. Do any of you administrate sendmail servers where some of your clients are using Apple's Mail.app on Snow Leopard, and if so what settings are you using? At this point, I'm happy to make changes to the server to accommodate Apple's issue, I have too many Mac users connecting to my server. I just can't figure out what to change. I've enabled virtually every possible login authentication combination, and none of them work.
OS: CentOS 5.3
vsftpd ver: vsftpd-2.0.5-12.el5_3.1
I installed vsftpd server in one of my servers using "yum install vsftpd" command. NFS server is running in the other server and mounted as "/data" in this FTP server. root in FTP server has also root authority in NFS server. All the files and sub-folders under "/data" in FTP server have 755 or 766 mode. Even I modified vsftpd setting to allow root login.
When I login as root to FTP server with FileZilla client, I can see all the file list in root home directory and move to /data directory. I can download any file in a local HDD but I can not download any file in /data directory.
I've been trying to make install apache 2.1.8 and php 5.2.3 and work on them. After updating and installing some dependence files, apache and php could both be installed.
Then I tried to configure them. I added the following content to the end of Apache httpd.conf:
Code:
Then I run /path/to/apachectl start, and saw the message:
Quote:
Invalid command 'RewriteEngine', perhaps misspelled or defined by a module not included in the server configuration
Then I remembered that I didn't include the rewrite module while making install apache. So I removed the 2 lines I just added to httpd.conf.
But, after running /path/to/apachectl stop and start again, I could still see:
Code:
When I use firefox to open http://host_ip:8080/, I could see "It works!". But when I open http://host_ip:8080/hello.php (the file is already under htdocs), firefox said
Quote:
Failed to Connect
Why and how to solve it?
I noticed that for some stupid reason, the conf file wasn't updated at all and the 2 erroneous lines were still there.