Server :: Ftp: Vsftpd With Firewall - External Ip Is Blocked Out With X

Jan 3, 2010

i have a server running vsftpd, and when i connect to it from the server itself using my externel ip address, everything checks ok, and i can browse files. but when i try to do the same on a windows computer on my network, this is what happens: [my externel ip is blocked out with x]

[Code]....

now mind you, my linux server is running from port forwarding from my router, which is connected to the main computer, and i have ssh and squid running as well. not sure if those two have any affect on the service. i think this is a problem with the firewall, because i have read somewhere that multiple ports need to be open for a passive ftp to work.

View 12 Replies


ADVERTISEMENT

Security :: Php Includes Blocked By Firewall?

Jun 18, 2009

If I use my current iptables firewall settings my php includes from my own site get blocked by the firewall. If I use accept all tcp and udp it still does not work. If I use a default policy of accept all, then the php includes work which is not safe. I am running a drupal 6 site on a centos 5.3 vps with apache 2.2.0 and php 5.2.6 w/ safe mode on. He is my current iptable configuration.

Quote:

Chain VZ_FORWARD (1 references)
target prot opt source destination
Chain VZ_INPUT (1 references)
target prot opt source destination

[code]....

View 2 Replies View Related

Fedora Networking :: UPnP Blocked By 12 Firewall?

Nov 28, 2009

The firewall in Fedora 12 seems to block UPnP by default, but opening port 1900 for UDP, as I have seen suggestedes not resolve the problem.have the following three scenarios:Firewall Enabled: Transmission cannot open a port by UPnPFirewall Enabled (1900 UDP allowed): Transmission cannot open a port by UPnPFirewall Disabled: Transmission opens a port via UPnP fineAny ideas? Yes, the port that I'm trying to open is also allowed. Router is a Linksys BEFSR41 v4.3, should you care

View 6 Replies View Related

Ubuntu :: Ufw Firewall Setup / Other Connections Have Been Blocked?

Aug 3, 2011

I run ubuntu on home pc and am very happy with it. I use internet to surf and to see my email on gmail.com etc. What commands should I give to setup ufw firewall so that only this much is allowed? Also, where can I see if some other connections have been blocked?

View 9 Replies View Related

OpenSUSE Network :: UPnP Blocked By SuSE Firewall?

Jan 15, 2011

I setup Mediatomb on another box in my house to connect to with XBMC. XBMC will only connect though if the firewall is off on the local machine. I have both TCP and UCP ports 1900 and 50500 (the port for Mediatomb) enabled on my laptop (local) and the correct ports are open on the remote machine (my wife's vista laptop will connect through XBMC). I can connect to Mediatomb through it's web interface (to set visible folders/files) but not through UPnP (at least not through XBMC)

View 9 Replies View Related

CentOS 5 :: Postfix + Procmail - Pop And Imap Ports Blocked By Firewall

Jul 11, 2009

Small server running 5.3 - stock postfix configured to use Maildir. Dovecot configured but both pop and imap ports blocked by firewall. Access to mail is via Squirrelmail via https. Configured to virus scan via ClamAV. Works just fine. Now I want to add procmail filtering. So I create these two files - ~/.forward and ~/.procmailrc in my user home dir: "|exec /usr/bin/procmail -f- || exit 75 #mpeters"

View 1 Replies View Related

Fedora :: Pidgin Not Connecting Properly As Internet Blocked By A Firewall / Get It To Work?

Jul 24, 2010

I am using pidgin messenger. Its not connecting properly as our Internet is blocked by a firewall. Can we do something so that it works properly

View 5 Replies View Related

Server :: Starting Vsftpd For Vsftpd: 500 OOPS: SSL: Cannot Load RSA Certificate?

Feb 10, 2011

Any clue? I'm using the same key for root login and it works fine (also works fine for SFTP but i hate using that cause its extremely slow)

View 2 Replies View Related

Ubuntu Security :: Firewall "blocked" IP But Still Connecting?

Jul 27, 2011

I was using Transmission BitTorrent the other night, when I noticed that I was getting heavily spammed by one particular IP. I then stopped the torrents and disabled the network.I wanted to add my own block-list, containing this IP, to $HOME/.config/transmission/blocklists, but could not get it working. Transmission is supposed to parse this text file into binary format upon startup. I tried both allowed formats, but Transmission kept on creating an empty binary file (this was version 1.93 in the official repo, I have since upgraded to 2.33 by adding a PPA, and it now works correctly).

I then blocked this IP in the firewall outbound traffic policy, allowing Transmission, on the port number that I forwarded on the router, on the inbound policy. After a restart, I watched the torrents picking up speed as more peers connected, and then saw this IP getting blocked. However, the same IP immediately also appeared as a peer in one of my torrents.I then double checked all settings and log files, to ensure that there is no typo. The same IP that was shown as blocked in the log files, also successfully made a connection to Transmission. After a while I gave up, and shut down.The IP was an incoming connection, but was explicitly nominated to be blocked in outgoing traffic. The firewall was supposed to silently ignore this IP, not making a connection possible.

ICMP filtering was enabled, with the following not allowed:

- Address Masking
- Redirection
- Source Quenching

Now surely this is not normal?Is this a bug in ip-tables?Isn't this a serious security breach?

View 2 Replies View Related

Fedora Networking :: Can't Ping External IPs (no Firewall, Web Works)?

Jun 17, 2009

Since I installed FC11 I can't get vpnc to work (I always getno response from target").Also I can't ping any external IP even with the firewall disabled.What I see strange is that I had the same configuration in FC10 and the router configuration seems okay to me:

Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
10.64.64.64 * 255.255.255.255 UH 0 0 0 ppp0

[code]...

View 3 Replies View Related

Server :: Connection Blocked To Kubuntu Server Outside Network

Jul 14, 2010

I've recently turned an older PC into a linux box for the purpose of creating an online server with ftp and ssh capability and file sharing. I've installed Kubuntu 9.10 and I'm trying to ssh to the computer from outside the network.I've install the openssh-client and openssh-server and I've created a static ip address, which works fine. I cannot ssh to the machine from outside the isp using either the direct ip address or hostname. The machine is connected to the internet via a Linksys Wireless G router, and I've edited the configuration settings to keep port 22 open for connect in the port server utility.

I've checked the ssh_config and sshd_config settings and port 22 is the default connection port, which is supposed to be open. I've run ifconfig and everything looks fine. I can connect to the computer using a machine connected to the same router, but other computers cannot access it. I want it to be visible to everyone.

View 6 Replies View Related

Server :: Sendmail Is Blocked?

Feb 3, 2010

I'm having a trouble with sendmail on Centos. When I check the maillog, every emails is sent, but when i check my mail browser, it didn't receive the mail. This problem happens with an email address only. (the red email was not received ) This is the maillog

[Code]....

View 5 Replies View Related

General :: Create An External SSL Wrapper/tunnel Page For An Insecure Webpage Behind A Firewall?

Mar 14, 2011

I have an security cam with a built-in webpage inside my home network. That camera is using basic HTTP authentication instead of SSL. I want to be able to access the camera's webpage from outside my network, but I don't want to open an unencrypted video stream to the outside world. Right now, I'm doing some cumbersome ssh tunneling where I bounce off an ssh server like: ssh -N -L 9090:[URl]..and then I connect to my web page like: http://localhost:9090

But this is a pain. Now, gentle reader, I beseech you to tell me how I can use linux (Ubuntu) to get a fully encrypted SSL connection to my internal web page without the hassle of creating an ssh tunnel each time. I believe I can use stunnel, but I'm not sure of the command.

View 1 Replies View Related

Server :: Port 995 And 587 Are Blocked, How To Open

Jan 28, 2011

I have Linux server (centos) in my company , Network is shared through this linux squid proxy server to Windows client .

How to open port 995 and 587 for Windows client because Outlook are not working in Windows Client ...

How to open this port for Windows Client.

View 4 Replies View Related

Server :: Sound Device Still Blocked?

Feb 2, 2010

I have the impression that the sound device is still occupied. Probably I do not properly kill the recording process and I guess that invoking the script 'record.sh' via fcrontab contributes to the problem as well.Is there someone who has an idea what could lead to that 'silence'?

View 1 Replies View Related

Server :: External SMTP Server With PHP / Send An Email Using An External Server?

Feb 9, 2011

I'm rather (VERY) inexperienced when it comes to Linux, but Fedora 14 is the environment I have to use on my laptop at work, so please forgive any dumb that comes out of me.

How do I tell php to send an email with mail() using an external mail server?

The situation: I've got apache/php running a webserver on my local machine. It's for dev purposes only, and the website files I'm using are checked out from our SVN. This lets me make changes to our website while not actually changing our website.

I've come across an issue I'm fixing where I need to verify that an email is successfully getting sent out, and unfortunately, this email is sent out using php's mail(), and not our website's usual $mail object. Unfortunately, I don't have the authority to change how this sends out right now, just when it sends out.

I've been running everything fine on my machine for a month now, and haven't needed the mail stuff until now. How do I tell php to send an email using an external server?

View 1 Replies View Related

Server :: Sendmail: Email Blocked Due To MUA's Dynamic IP?

Feb 11, 2011

I use sendmail as the MTA for our company. Lately employees have started working from home. These home users send their email through our company MTA using SASL-AUTH. This works fine for the most part but lately we've seen problems with this. The SORBS blacklist looks not only at the IP address of our company's MTA but also at the IP address of our employees home computers. (After all, the home computer IP address is revealed in the mail header.)

SORBS has been rejecting emails sent from our home users because their dynamic IP address is present in the email headers. This is true despite their email passing through our company MTA which is on a properly forward and reverse mapped static IP. The company MTA is not listed in SORBS but the mere presence of a dynamic IP somewhere in the mail header is causing outright rejection. This seems bizarre to me considering home workers sending through a company relay is a common and reasonable business practice.

Can sendmail offer a solution here? For example, to change headers to obscure the IP address of the MUA or make the email appear to have originated directly on the MTA? I don't want to mess with internet RFC but frankly I'm out of ideas for how to get the mail delivered.

View 1 Replies View Related

Server :: .htaccess Blocked Access Host-headers?

Mar 12, 2011

We want apache to server and load our website Only for One specific sub-domain and all other domains should be ignored/dropped or redirect.

View 2 Replies View Related

Server :: Task Blocked For More Than 120 Seconds Errors And Crashes?

Jul 10, 2011

I see tons of these in my dmesg, and it's causing my virtualbox vms to crash with disk IO errors. It's only affecting the Linux guests. What would cause this?

Code:
INFO: task tar:1865 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.

[code]....

View 11 Replies View Related

CentOS 5 Server :: Vsftpd - Working With NFS Server As Home Directory

Aug 31, 2009

OS: CentOS 5.3
vsftpd ver: vsftpd-2.0.5-12.el5_3.1

I installed vsftpd server in one of my servers using "yum install vsftpd" command. NFS server is running in the other server and mounted as "/data" in this FTP server. root in FTP server has also root authority in NFS server. All the files and sub-folders under "/data" in FTP server have 755 or 766 mode. Even I modified vsftpd setting to allow root login.

When I login as root to FTP server with FileZilla client, I can see all the file list in root home directory and move to /data directory. I can download any file in a local HDD but I can not download any file in /data directory.

View 1 Replies View Related

CentOS 5 Server :: Port Configuration - Being Blocked - Iptables And Connection

Jul 4, 2009

I have a fresh installation of CentOS 5 I'm using for a server, and I'm having issues with port configuration. I have iptables running, and it started with no /etc/sysconfig/iptables file. I added a few basic rules (port 53, port 10000 for webmin), saved the file, and restarted the service. I tried connecting to webmin, scanned ports, and traffic was blocked. I set iptables to allow all traffic and restarted the service, and it still showed basically every port as being blocked. It seems port 80 and port 22 work for some reason, even when I tell iptables to block all ports.

I'm not sure what's going on here. Iptables is reading the /etc/sysconfig/iptables file, and if I use lynx localhost:someport it responds as it should according to the file. However, if I try connecting by IP, it's like there's some other firewall or something running that does whatever it's configured to do.....

View 2 Replies View Related

Server :: Configure Vsftpd Server With User Name And Password

Aug 3, 2010

pls tell me complete configuration of vsftpd server on redhat 5

View 1 Replies View Related

Debian Configuration :: Install A Multi-core System And Configure It To Run Several VMs, One Each For A Firewall, A Caching Proxy Server, A Mail Server, A Web Server?

Jan 25, 2011

I will be relocating to a permanent residence sometime in the next year or two. I've recently begun thinking about the best way to implement a home-based network. It occurred to me that the most elegant solution might be the use of VM technology to eliminate as much hardware and wiring as possible.My thinking is this: Install a multi-core system and configure it to run several VMs, one each for a firewall, a caching proxy server, a mail server, a web server. Additionally, I would like to run 2-4 VMs as remote (RDP)workstations, using diskless workstations to boot the VMs over powerline ethernet.The latest powerline technology (available later this year) will allow multiple devices on a residential circuit operating at near gigabit speed, just like legacy wired networks.

In theory, the above would allow me to consolidate everything but the disklessworkstations on a single server and eliminate all wired (and wireless) connections except the broadband connection to the Internet and the cabling to the nearest power outlets. It appears technically possible, but I'm not sure about the various virtual connections among VMs. In theory, each VM should be able to communicate with the other as if it was on the same network via the server data bus, but what about setting up firewall zones? Any internal I/O bandwidth bottlenecks? Any other potential "gotchas", caveats, issues? (Other than the obvious requirement of having enough CPU and RAM).Any thoughts or observations welcome, especially if they are from real world experience in a VM environment. BTW--in case you're wondering why I'm posting here, it's because I run Debian on all my workstations/servers (running VirtualBox as a VM for Windows XP on one workstation).

View 14 Replies View Related

Server :: Getting Webserver Blocked By Mysql Server Because Of "to Many Connection Errors"?

Jan 17, 2011

I sometimes get my webserver blocked by my mysql server because of "to many connection errors" and have to use flush hosts to solve it, i now wonder if there is any way to increese that connection error value so the webserver wont get blocked ?

View 1 Replies View Related

Server :: Ssl Key And Vsftpd - Server Certificate Not Activated Yet

Apr 14, 2010

I have just generated a new ssl key on my ftp server with the following command

Code:

I then put my new key onto my file server and attempted to connect to the FTP and it failed (this did work before with the default key).. I use curlFTPfs to mount the FTP directory locally as /ftpbackup, below is the command and the output.

Code:

Error connecting to ftp: server certificate not activated yet. As you see it gives an error about the certificate not being activated, I have looked this up and cant find a way to activate it.

Below is the contents of vsftpd.conf on the ftp server

Code:

View 1 Replies View Related

Server :: How To Setup Vsftpd

Jan 18, 2010

I just installed Ubuntu server and wish to run an apache web server from it. I have that setup, with each user having their individual folder. (E.G) apache root /var/www/ LazerPhreaks folder is /var/www/LazerPhreak/ so their website would be www.mysite.com/LazerPhreak/) I wish to setup vsftp to let each user access their individual folder and upload website files via ftp. How should I go about this?

View 1 Replies View Related

Server :: Installing Vsftpd With Yum

Mar 13, 2010

After giving it some thought, I decided to bail on proftpd, which I've used for some time.

I used

Quote:

But when I search around with locate proftpd, there seems to be a lot of "leftover" stuff. I'd like to remove all traces. Possible?

Now, I installed vsftpd:

Quote:

But when I try to start it, I get:

Quote:

I tried to locate its conf file, but I get this:

Quote:

Though I know it's at:

Quote:

Also, there does not seem to be a log file at /var/log/vsftpd.log or anywhere else.

View 1 Replies View Related

Server :: How To Configure The Vsftpd

Feb 13, 2010

how to configure vsftpd? i use rhel-5 server.

View 1 Replies View Related

Server :: Vsftpd SSH Add User ?

Sep 5, 2010

I'm trying to add users.

(Translation: gebruiker = user)


I did this:

I want that only gebruiker1 can be in his map home/gebruikers/gebruiker1

But now he can see the whole server dir.

View 8 Replies View Related

Server :: Vsftpd Will Now Allow Upload?

Mar 31, 2010

I have a vsftpd server configured and I cannot upload using anonymous account, I've trawled the net have have exhausted my search for answers. Here is my vsftpd.conf file

Code:
# Example config file /etc/vsftpd/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.

[Code]...

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved