Server :: VSFTPD - 553 Could Not Create File
Dec 18, 2010
I am trying to use cron and FTP to backup files regularly from my main server to a backup server. The backup server was a "bare bones" setup with no control panel or even FTP. It is running CentOS 5.3.
I installed VSFTPD which appears to be running OK and I can connect via FTP from my other server, but when I try to run my backup script (it uses mput) I get a "553 Could not create file" error.
Some relevant info:
The user I have created for this is "ftz" with home directory /home/ftz/
Running ls -l shows: drwxrwxrwx 3 ftz ftz 4096 Dec 18 07:46 ftz
so permissions and directory ownership don't seem to be the problem.
vsftpd.conf was left in default form:
Code:
# Example config file /etc/vsftpd/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
[code].....
View 4 Replies
ADVERTISEMENT
May 13, 2010
I'm completely new to Linux/Ubuntu, but I managed to create a FTP server by using apt-get vsftpd or something.I followed a tutorial and modified a file called vsftpd.conf.I tried to disable all kind ofblocking/permissions. From a Windows client, I can connect to it without any login (I enabled anonymous) and I can download from it, but I am unable to modify it or upload files. Unless there is a better way to transfer files between the computers, how can I enable writing on the FTP server?
View 3 Replies
View Related
Feb 10, 2011
Any clue? I'm using the same key for root login and it works fine (also works fine for SFTP but i hate using that cause its extremely slow)
View 2 Replies
View Related
May 31, 2011
i want to configure vsftpd server with file zilla in ubunto environment..
View 3 Replies
View Related
Oct 20, 2010
I would like to configure an access to folder
/fileserver
for two services : Samba and VSFTPD
How to do it ? How to create folder rights that samba and ftp user will have an access (read/write/delete) to all directories in /fileserver.
My system is CentOS. I`m starting samba and vsftpd like a root (/etc/init.d/vsftpd start etc.)
View 1 Replies
View Related
Sep 20, 2010
I have a centos server installation running, and have installed and configured vsftpd.
FileZilla works great. I am able to connect and transfer files both ways. I used this just for testing purposes.
What I need to do is get Fling File Transfer working. I can connect to vsftpd with Fling, but that is as far as it goes.Sep 20 11:18:44 ftp vsftpd[28286]: warning: can't get client address: Socket operation on non-socketSep 20 11:31:03 ftp avahi-daemon[2240]:
Fling's logfile shows this:
11:25:57 Connect: 192.168.40.41
11:25:57 Connect: 192.168.40.41 Ok
11:25:57 Upload: C:UsersPublicDocumentsFling 1
[code]....
View 2 Replies
View Related
Nov 12, 2010
1.How create a Zone file
2.Named.conf file conf...
3.Dig check is not working......
View 1 Replies
View Related
May 7, 2011
I tried to create logfile for the below shell program but i was not able to get log file,can anyone help me for the below program to create a log file for the shellscript.
View 12 Replies
View Related
Jan 25, 2010
I need to create a server for a database that has a .db file that is over 800Gb. now my first disk is 50Gb and i do the standard
100m ext2 boot
2000m swap
* / ext3
now I have a second 1.2T that i want to be /opt is there a way to set up 4kib block size in ext3 in the os install? or should I do it after the install? Is this block size even big enough?
View 11 Replies
View Related
Jan 17, 2011
I'm looking to create a file server of over 24TB+ and was wondering if anyone knew of any barriers to doing this in Ubuntu.
I am considering limiting each server to 8TB, and creating 4 of them. I think once I take into consideration the hardware limitations, and backup (I will need a RAID configuration (still deciding)) then perhaps 24TB in one box is possibly a little unlikely!
View 9 Replies
View Related
Dec 16, 2010
I created VirtualHost in apache configuration file.
Code:
NameVirtualHost 77.79.13.20:80
<VirtualHost 77.79.13.20:80>
DocumentRoot "/var/www/host"
ServerName host.t2p.lt
</VirtualHost>
[Code]...
View 1 Replies
View Related
Jun 14, 2011
I'm unable to ftp from one server to another server.
Getting the below error:
put: Access failed: 553 Could not create file
ftp script :
USER="test"
PASSWD="test"
HOST="10.43.45.00"
echo "starting Secure FTP ..."
lftp -u ${USER},${PASSWD} ftp://${HOST} <<eof
cd /home
lcd /home
put /home/test3.csv
bye
eof
echo "I have get all csv files
View 2 Replies
View Related
Apr 11, 2011
I just ordered a new unmanagd VPS I have already Apache, PHP and Mysql the only problem I have now is how to create a A,NS and MX record in CentOS. I dont know where the DNS zone file is in CentoS
View 2 Replies
View Related
Mar 13, 2011
Any command line tool to create a m3u file from directories?
View 1 Replies
View Related
May 5, 2010
I need to create a report ,
The data is spread across two files in below format,
File 1
=========
<Class Name1>
Ph: 001
Place: place001
</class>
[Code]....
View 4 Replies
View Related
Aug 31, 2009
OS: CentOS 5.3
vsftpd ver: vsftpd-2.0.5-12.el5_3.1
I installed vsftpd server in one of my servers using "yum install vsftpd" command. NFS server is running in the other server and mounted as "/data" in this FTP server. root in FTP server has also root authority in NFS server. All the files and sub-folders under "/data" in FTP server have 755 or 766 mode. Even I modified vsftpd setting to allow root login.
When I login as root to FTP server with FileZilla client, I can see all the file list in root home directory and move to /data directory. I can download any file in a local HDD but I can not download any file in /data directory.
View 1 Replies
View Related
Aug 3, 2010
pls tell me complete configuration of vsftpd server on redhat 5
View 1 Replies
View Related
Apr 26, 2011
I need help to do a program that emulates the following shell command line:"sort </etc/passwd | less".Using a socket in a connection-oriented setup.First the contents of the file /etc/password are being fed into the sort program. The sort program is then sorting the contents of the file and sending it to another programm called less. Less is paging the results so that you can see one page of the results at a time.I know that i can solve the problem this way:
1. Create a server program that will stream the contents of a file to any client that connects to it
2. Create a client application that will connect to the server and download the contents of the file. The program should then sort the file. After sorting the file the client should connect to the "less" program and send the sorted results
3. Create a server program that will listen for connections and download whatever is sent to it. It will then display that data one page at a time.
View 1 Replies
View Related
Apr 24, 2010
Is there a way to create a Seperate X Server on openSUSE 11.2 without editing the xorg.conf file? I red on this forum that should not be used any longer.
View 3 Replies
View Related
Jun 18, 2010
I want to create a file-server with Ubuntu and have two additional hard drives in a RAID 1 setup. Current Hardware: I purchased a RAID controller from [URL]... (Rosewill RC-201). I took an old machine with a 750GB hard drive (installed Ubuntu on this drive). I installed the Rosewill RAID card via PCI port. Connected two 1TB hard drives to the Rosewill raid card. Went into the RAID bios and configured it to RAID 1.
My Problem: When I boot into Ubuntu and go to the hard drive utility (I think that's what its called). I see the RAID controller present with two hard drives configured separately. I format and tried varies partition combination and at the end of the day I see two separate hard drives. Just for giggles, I also tried RAID 0 to see if they would combine the drives.
View 3 Replies
View Related
Oct 19, 2010
I install a Bind 9 with chroot in Centos 5, but the issue is the Reverse Name Resolution Zone File didn't create by default like other zone files, so i look into /var/named directory i don't find the reverse name resolution zone file even if i add this zone on named.conf
zone "1.168.192.in-addr.arpa" IN {
type master;
file "1.168.192.testsip.com.zone";
allow-update { key "rndckey"; };
notify yes;
};
View 1 Replies
View Related
Mar 6, 2011
I've got a bachelors in Computer Information Systems from Metro State in MN, but sadly, we didn't spend much time familiarizing ourselves with UNIX based OSs. I'm sure I'll have plenty more questions to pose later as well. I'll pay it back with help for anyone who's working on an evil Nortel router.
I believe I've got VSFTP set up and configured (mostly) the way I want. Here is the config file:
Code:
travis@travish82server:/etc$ cat vsftpd.conf
listen=YES
anonymous_enable=NO
local_enable=YES
write_enable=YES
dirmessage_enable=YES
[Code]...
View 3 Replies
View Related
Apr 14, 2010
I have just generated a new ssl key on my ftp server with the following command
Code:
I then put my new key onto my file server and attempted to connect to the FTP and it failed (this did work before with the default key).. I use curlFTPfs to mount the FTP directory locally as /ftpbackup, below is the command and the output.
Code:
Error connecting to ftp: server certificate not activated yet. As you see it gives an error about the certificate not being activated, I have looked this up and cant find a way to activate it.
Below is the contents of vsftpd.conf on the ftp server
Code:
View 1 Replies
View Related
Jan 18, 2010
I just installed Ubuntu server and wish to run an apache web server from it. I have that setup, with each user having their individual folder. (E.G) apache root /var/www/ LazerPhreaks folder is /var/www/LazerPhreak/ so their website would be www.mysite.com/LazerPhreak/) I wish to setup vsftp to let each user access their individual folder and upload website files via ftp. How should I go about this?
View 1 Replies
View Related
Mar 13, 2010
After giving it some thought, I decided to bail on proftpd, which I've used for some time.
I used
Quote:
But when I search around with locate proftpd, there seems to be a lot of "leftover" stuff. I'd like to remove all traces. Possible?
Now, I installed vsftpd:
Quote:
But when I try to start it, I get:
Quote:
I tried to locate its conf file, but I get this:
Quote:
Though I know it's at:
Quote:
Also, there does not seem to be a log file at /var/log/vsftpd.log or anywhere else.
View 1 Replies
View Related
Feb 13, 2010
how to configure vsftpd? i use rhel-5 server.
View 1 Replies
View Related
Sep 5, 2010
I'm trying to add users.
(Translation: gebruiker = user)
I did this:
I want that only gebruiker1 can be in his map home/gebruikers/gebruiker1
But now he can see the whole server dir.
View 8 Replies
View Related
Mar 31, 2010
I have a vsftpd server configured and I cannot upload using anonymous account, I've trawled the net have have exhausted my search for answers. Here is my vsftpd.conf file
Code:
# Example config file /etc/vsftpd/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
[Code]...
View 9 Replies
View Related
Jul 22, 2010
I've just installed Ubuntu server 10.04 and have set up vsftpd somewhat successfully. I can connect as my root user, and I only have access to my home directory. However, whenever I try to copy a file across a file I receive a 550 Permission denied error.
I've run the command ls -l /home/directory and the result returned is total 0, when I was expecting details of permissions per user. I've tried running chmod -w /home/directory but this doesn't return any result nor change the result of the above ls command.
View 5 Replies
View Related
Mar 8, 2011
Does someone know of a solid article on what files to back up to restore a vsftpd server onto another server?
Right now i'm backing up the ftp directory structure with all the files in it, but no configs, users, etc
View 2 Replies
View Related
