i have installed FTP server on fedora 13 its working absoultely fine on server but when im trying to open through other pc's browser it giving internet explorer cannot display the webpage.could anyone telme how to access my ftp server in internally as well as outside the network.I have installed ftp in server 2008 but still same issue.
View 1 RepliesI configured openLdap in RHEL5 on virtual achines,everything is working fine, I created a user called ldapuser,in LDAP server and i created a home directory for ldapuser in my LDAP client, now i can able to login to the both Server and client with ldapuser account....
Now here what am expecting is i want to export my server's home directory to the client, i dont want to create home directories manually in the client machine, i googled about that, and it can be done through autofs.....
what need to be done on the client and server side.
I have a Nis server on Suse 11 which is configured using Yast and nis clients on Suse and CentOs .All clients which is on the Suse Os is working fine. But on CentOs , users couldn't login using nis username.I have mounted home directory using nfs in fstab . I can switch to nis users homedirectory only when i am root. But nis users could'nt login on reboot.' ypcat passwd username ' is showing the output . No selinux is enabled in the client .Is there is any problem with Suse server to Centos Client in nis ??
View 2 Replies View RelatedJust installed openldap server on a VM CentOS called 'ldapsrv', it works fine, ldapsearch returns all ldap information.
Installed openldap client on another VM CentOS called 'ldapclient1', configured it with most basic configuration, no ssl/tls etc. but ldapsearch returns error:
ldapsrv is pingable:
Some outputs:
PHP Code:
PHP Code:
I am on home internet access so it does not have a fix IP. I would like to set my web server to be accesible from outside. So what I do? First I must set my router to point access for port 80 to this machine. Then in the machine I open port 80 right? Then what software must I install is it no-ip?
View 3 Replies View Relatedusing OEL 5.4, which uses Gnome 2.16 interface I can see my share from Windows, but whatever I do, I get messages that my share is not accessible. The whole user thing is quite complex, dont understand what user I should use on Windows, what password, what user should have what rights on linux.
I'll post smb.conf tomorrow ... The problem is that Windows lacks any decent error message, stating what kind of error message. Is there no Samba client for Windows?
I used vmware to create a guest OS in vmware.The IP of Guest Ubuntu is 192.168.43.129 and that of host Ubuntu is 192.168.1.3
Here is apache log when I access the site on machine where it actually is (guest os) as http://localhost
the apache log shows
Quote:
127.0.0.1 - - [04/Feb/2011:22:18:29 +0530] "GET /some/templates/default/images/ButtonsBack.gif HTTP/1.1" 304 - "http://localhost/some/templates/default/delos.css" "Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.0.8) Gecko/2009033100 Ubuntu/9.04 (jaunty) Firefox/3.0.8"
[Code]....
I'm installing Liferay as a WAR on Tomcat 6 on a new Ubuntu server.I want my portal accessible only via HTTPS, that's why I've enabled it via Apache.My config :Apache 2 (/etc/apache2/sites-enabled/001-https)
Code:
<VirtualHost my.domain.com:443>
ServerAdmin admin@domain.com
[code]....
I have installed nfs-kernel-server on the server and nfs-common on the client. Assumeserver 192.168.1.1client 192.168.1.3
content of /etc/exports is:
/home 192.168.1.0/255.255.255.0(rw,sync,no_root_squash)
/home/nfsroot 192.168.1.0/255.255.255.0(rw,no_subtree_check,async,no_root_squash)
[code]....
I have a small home-office network. On that network I have two linux computers, one is a client the other a server.
On the server I have NFS Server setup and mount some NFS exports on the client computer.
On the server I have the firewall on and here it becomes a little tricky.
Since both the server and the client connect to the router the interface (eth1) is theoretically both an internal & external zone.
The router is commercial grade and therefore has a good firewall on it which is also setup. Therefore the firewall on the server is really more of a backup than a necessity. But that's fine, and by having the server's firewall on 'fail2ban' is able to work which I like to have working so I don't want to just turn off the server firewall even though I have good security from the router.
However, when I turn on the server's firewall, the client computer cannot see the NFS server when scanning for server -- done by: clicking on "Choose" next to "NFS Server Hostname" when adding an NFS share in the NFS Client in YaST. Clearly something is being blocked even though I have both "NFS Client" and "NFS Server Service" allowed in the server firewall. The Firewall config. files for these are below.
The Firewall configuration is pretty much "out of the box". That is I have the services I need opened up for the external zone, the other zones are left at their default which means the internal zone, although not used (i.e.: attached to any interface), is completely open.
The perfect solution I guess would be to setup my client computer to connect through a different NIC (perhaps eth0), make that the "Internal Zone" and therefore allow all traffic through to it while still blocking the server from the external zone. However, I cannot make that physical change to my network for now so I am looking for an in between (non-perfect) solution.
In this case I am guessing that means opening up extra NFS ports to the external zone so I have full NFS functionality. I don't mind this because like I said, the router firewall is the main line of defense anyway.
So, given all of the above could someone tell me what I would need to additionally open up in the server firewall to make the NFS server detection work on the client while the firewall was on. Or, if you have a cleverer/better solution without me changing my physical network that would be great.
Hopefully I have written this in enough detail and clearly enough so that all the parameters are clear but if not, feel free to ask me what you like and I'll try to make it clear.
Code:
## Description: Firewall Configuration for NFS kernel server.
#
# Only the variables TCP, UDP, RPC, IP and BROADCAST are allowed.
# More may be supported in the future.
code....
My desktop is running 'buntu 9.10 and I have recently aquired a couple of half decent servers running Windows server 2003. I have a few windows app's that I use regularly for work that I have had limited success in running with wine or in vm's. I stumbled upon a how to to call apps in a vm to run seamlessly on the host desktop and did some playing and have succeeded in calling app's on my servers from my 'buntu desktop, the command I have set in my launcher for one of them (DIALux)
My question is, can I change the default application/file association in 'buntu with a custom command so I can double click on a file and have it open in one of these remote app's??If I can, what is the correct custom command to be using as using the above doesn't work at all, it just tries to open the file with rdesktop not the remote app.
I have a CentOS + Samba server and Windows XP client machines. Users, passwords and permissions are entered on the server machine.users and passwords ( same as on the server ) are entered in the XP client machine.When attempting to access a public file on the server using a XP client machine and the IP address of my server, I am asked a user name and password and none of the already entered seem to work. I cannot access the server file (prompted again and again to enter user name and password). What did i miss
View 7 Replies View RelatedI'm trying hard to run an openvpn server on a openvz VPS, the problem is packets sent from openvpn server process, doesnt reach the client, so connection is never stablished (I run tcpdump on server and wireshark on client to carefully investigate whats wrong), the first guess is that a kind of firewall is blocking traffic (I tried connecting to server through different ISP's but it's possible the national network provider applied some filtering but it cant be on IP,src port or dst port as I'd tried different configuration.
what about deep packet inspection technics, is it possible to block my traffic?) but at exactly the same time I can transmit UDP packets using netcat from server to the guest. there is no firewall enabled in between, I had tried, tcp and udp, tried both open vpn and openvpnAS and tried any thing one can imagine! the VPN is configured as a routed (TUN) type on debian
i am working on fedora 10 and configured dns on my college lan which already has it's dns at 192.168.5.20 .So i configured my private dns server at 192.168.101.91 which is my ip too.And the domain name is the host name of my system for example server.onkie.com.MY dns port 53 is shown when i do nmap localhost but but doesnt show when i do nmap 192.168.101.91 .Also when tested my server on other computers on my lan with there primary dns as 192.168.5.20 and secondary as 192.168.101.91 they cant access my site at my system with the name server.onkie.com . nmap localhost
[Code]...
I am working on fedora 10 and configured dns on my college lan which already has it's dns at 192.168.5.20 .So i configured my private dns server at 192.168.101.91 which is my ip too.And the domain name is the host name of my system for example server.onkie.com.MY dns port 53 is shown when i do nmap localhost but but doesnt show when i do nmap 192.168.101.91 .Also when tested my server on other computers on my lan with there primary dns as 192.168.5.20 and secondary as 192.168.101.91 they cant access my site at my system with the name [URL].. . nmap localhost
Starting Nmap 5.00 ( http://nmap.org ) at 2009-09-22 21:24 IST
Interesting ports on onkar (127.0.0.1):
Not shown: 993 closed ports
PORT STATE SERVICE
22/tcp open ssh
53/tcp open domain ----the dns is running
[Code]...
I already disabled my selinux and iptables ..but then also it's not accessible in Lan .
My school computer Crasht, so i thoug hey i wana create a linux server, so do anyone know how to make a Fedora server that can be acest thru the wanport ( acest thru the web ) for sharing school stuff etc ... any one know? or know where i shoud look for manuals?
View 1 Replies View RelatedCannot access installation media
Index of /repositories/GNOME:/STABLE:/3.0/openSUSE_11.4
GNOME:STABLE:3.0 (Medium 1).
Check whether the server is accessible.
Index of /repositories/GNOME:/STABLE:/3.0/openSUSE_11.4
File './x86_64/Mesa-7.10-1.2.x86_64.rpm' not found on medium '[URL]'
Fresh Install. Used Gnome3 link from here
openSUSE:GNOME 3.0 - openSUSE
Worked Yesterday. Not today
I setup a server last night and was able to remotely connect to it and access the internet with it. However, now that I have setup /etc/network/interfaces so that the server will have a static IP address, I cannot access the server remotely. Also, from the server itself, I cannot access the internet. Ping provides "unkown host" for any website I try. How do I fix this?! I don't know why this is happening.
Here is my interfaces file:
Code: ...
#The primary network interface
allow-hotplug eth0
# also tried with and without auto eth0
# auto eth0
iface eth0 inet static
address 192.168.133
netmask 225.225.225.0
gateway 192.168.1.1 This is the only NIC on the server.
Here is ifconfig:
Code: eth0
Link encap:Ethernet HWaddr xx:xx:xx:xx:xx:xx
inet addr: 192.168.1.133 Bcast:192.168.1.225 Mask:225.225.225.0
UP BROACAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txpueuelen:1000
RX bytes:0 (0.0 B) TX bytes: 0 (0.0 B)
Interupt: 29
I have a samba server set up on my computer, and I can only access the shares over the network by loging in as my main user. This works for all shares, on any drive. When I log in using my fileshare guest account, I get the list of shares, but after selecting one to connect to, it gives an error that the server isn't available. Any share off the boot drive won't work. I don't know if it has to do with permissions, or it's a config problem.
View 5 Replies View RelatedI love Ubuntu and last night I wiped crappy windows 7 off my laptop and installed and customised a beautiful Ubuntu 9 OS ( I tried the new 10.04 first but it had some issues for me ). Now, up here at work we got a Domain Controller that is running windows server 2008, I need to be able to RDP into it and mess with it, I tried to use the Terminal Server Client that comes with Ubuntu, and I can see the login screen just fine, but when I try to log in it says incorrect password and wont go through.
Just to make sure it was not my account that was the issue, I went to my boss and used his computer (a MAC running OSX) and I was able to get into the same server with the same credentials, so it has something to do with my computer not my account. Do any of you have any ideas on what the problem could be?
I have 2 ethernet cards but when I look at the Network configuration in "Hardware Tab" I have another acx wireless network. How to delete that because In my system Idon't have wireless card..probably installed before but want delete it now.
[code]...
then windows can ping server and resolve ip address and browsing Internet but can't ping [URL]... result is Request time out. ICMP already enabled in iptables.
i tried to connecting from a windows7 client to a linux server through vnc server.But its very slow , is there any alternative for vnc . i heard that samba can be used as a remote desktop tool if its true please reply with configuration details.
View 2 Replies View RelatedI actually have a server and a client.The client must connect to the server (via internet) to access to external websites. (You can see the attachment, maybe it's more clear )My actual problem is, I have configure Squid on my server, but I want to force SSL for the connection between the client and the server.I didn't really find nice tutorials about on that, maybe someone have an idea ? Or maybe some indications ?
View 1 Replies View RelatedIn a newly installed Linux machine which is a client machine, is not listening to NIS domain server even after setting IP address ,default gateway,and subnet mask.What are all the changes to be done in configuration file.And how can be solved
View 2 Replies View RelatedI have one Windows-XP on Machin 1 and one Linux on Machine 2.
I want make Linux machine as CVS server and Windows Xp as CVS client.
How to setup CVS Server in Fedora-11 machine and CVS client in Windows Xp?
Photo : http://img27.imageshack.us/img27/5864/cvsserver.gif
I am not able to access yum repository from client but able to access yum from server through ftp.I am getting the below error from client system as,
Client Config:--
[root@Client ~]# cat /etc/yum.repos.d/client.repo
[Client]
name=Client Repo
baseurl=ftp://1.1.1.1/pub/package
[Code].....
I also had remove the repodata directory from server & again configured the yum repository through createrepo but still getting the same error from client.
Is there any SElinux policy need to be enabled ?
I am able to ping 1.1.1.1 (server) from 1.1.1.2 (client).
I just setup a ubuntu 10.10 box learn linux and to play around with, and want it to host my website. I can see the web site on my local network no problem but the outside world gets a time out message. I check to make sure everything is forwarded correctly on my router and the dns so i has to be something in ubuntu blocking out-of-network traffic how do i turn port 80 on to the outside world
View 4 Replies View RelatedWe have a development server not accessible to the public used for testing which was setup for us. When attempting to have my PHP scripts upload an image to a folder, I have to CHMOD the folder to 777. Ideally, when a folder is created it has permissions set to 755 - I want to be able to upload to them. Is there a way to change permissions to allow the PHP scripts that run to be able to write to a folder? I know it has something to do with owner or group, but I don't know where to start.
View 2 Replies View RelatedIt resides at 65.211.112.135 There are numerous domain names on this ip [URL]s Those are a few of them. Now if you try to ping 65.211.112.135 it does not respond, if you ping "www.barrierfree.us" it says pinging 65.211.112.135 but it also does not respond. BUT if you point your browser to one of the above domain names it will work, but it is quite slow.
View 9 Replies View Relatedi added users to the group om PDC after it i shared folder on linux server and given permission for users from this group, the folder is showed correct. After it i removed users from group, but the folder is accessible. Where is mistake?
[global]
workgroup = STSCOMPANY
password server = *
[code]....